Glucose‐Induced Synthesis of 1T‐MoS2/C Hybrid for High‐Rate Lithium‐Ion Batteries

1T phase MoS₂ possesses higher conductivity than the 2H phase, which is a key parameter of electrochemical performance for lithium ion batteries (LIBs). Herein, a 1T‐MoS₂/C hybrid is successfully synthesized through facile hydrothermal method with a proper glucose additive. The synthesized hybrid material is composed of smaller and fewer‐layer 1T‐MoS₂ nanosheets covered by thin carbon layers with an enlarged interlayer spacing of 0.94 nm. When it is used as an anode material for LIBs, the enlarged interlayer spacing facilitates rapid intercalating and deintercalating of lithium ions and accommodates volume change during cycling. The high intrinsic conductivity of 1T‐MoS₂ also contributes to a faster transfer of lithium ions and electrons. Moreover, much smaller and fewer‐layer nanosheets can shorten the diffusion path of lithium ions and accelerate reaction kinetics, leading to an improved electrochemical performance. It delivers a high initial capacity of 920.6 mAh g^?1 at 1 A g^?1 and the capacity can maintain 870 mAh g^?1 even after 300 cycles, showing a superior cycling stability. The electrode presents a high rate performance as well with a reversible capacity of 600 mAh g^?1 at 10 A g^?1. These results show that the 1T‐MoS₂/C hybrid shows potential for use in high‐performance lithium‐ion batteries.     

Nitrogen Doped γ‐Graphyne: A Novel Anode for High‐Capacity Rechargeable Alkali‐Ion Batteries

High energy density is the major demand for next‐generation rechargeable batteries, while the intrinsic low alkali metal adsorption of traditional carbon–based electrode remains the main challenge. Here, the mechanochemical route is proposed to prepare nitrogen doped γ‐graphyne (NGY) and its high capacity is demonstrated in lithium (LIBs)/sodium (SIBs) ion batteries. The sample delivers large reversible Li (1037 mAh g^?1) and Na (570.4 mAh g^?1) storage capacities at 100 mA g^?1 and presents excellent rate capabilities (526 mAh g^?1 for LIBs and 180.2 mAh g^?1 for SIBs) at 5 A g^?1. The superior Li/Na storage mechanisms of NGY are revealed by its 2D morphology evolution, quantitative kinetics, and theoretical calculations. The effects on the diffusion barriers (E_b) and adsorption energies (E_ad) of Li/Na atoms in NGY are also studied and imine‐N is demonstrated to be the ideal doping format to enhance the Li/Na storage performance. Besides, the Li/Na adsorption routes in NGY are optimized according to the experimental and the first‐principles calculation results. This work provides a facile way to fabricate high capacity electrodes in LIBs/SIBs, which is also instructive for the design of other heteroatomic doped electrodes.     

Porous Carbon Nanofibers Encapsulated with Peapod‐Like Hematite Nanoparticles for High‐Rate and Long‐Life Battery Anodes

Fe₂O₃ is regarded as a promising anode material for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs) due to its high specific capacity. The large volume change during discharge and charge processes, however, induces significant cracking of the Fe₂O₃ anodes, leading to rapid fading of the capacity. Herein, a novel peapod‐like nanostructured material, consisting of Fe₂O₃ nanoparticles homogeneously encapsulated in the hollow interior of N‐doped porous carbon nanofibers, as a high‐performance anode material is reported. The distinctive structure not only provides enough voids to accommodate the volume expansion of the pea‐like Fe₂O₃ nanoparticles but also offers a continuous conducting framework for electron transport and accessible nanoporous channels for fast diffusion and transport of Li/Na‐ions. As a consequence, this peapod‐like structure exhibits a stable discharge capacity of 1434 mAh g^?1 (at 100 mA g^?1) and 806 mAh g^?1 (at 200 mA g^?1) over 100 cycles as anode materials for LIBs and SIBs, respectively. More importantly, a stable capacity of 958 mAh g^?1 after 1000 cycles and 396 mAh g^?1 after 1500 cycles can be achieved for LIBs and SIBs, respectively, at a large current density of 2000 mA g^?1. This study provides a promising strategy for developing long‐cycle‐life LIBs and SIBs.     

Confinement Growth of Layered WS2 in Hollow Beaded Carbon Nanofibers with Synergistic Anchoring Effect to Reinforce Li+/Na+ Storage Performance

Novel nitrogen doped (N‐doped) hollow beaded structural composite carbon nanofibers are successfully applied for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs). Tungsten disulfide (WS₂) nanosheets are confined, through synergistic anchoring, on the surface and inside of hollow beaded carbon nanofibers (HB CNFs) via a hydrothermal reaction method to construct the hierarchical structure HB WS₂@CNFs. Benefiting from this unique advantage, HB WS₂@CNFs exhibits remarkable lithium‐storage performance in terms of high rate capability (≈351 mAh g^?1 at 2 A g^?1) and stable long‐term cycle (≈446 mAh g^?1 at 1 A g^?1 after 100 cycles). Moreover, as an anode material for SIBs, HB WS₂@CNFs obtains excellent long cycle life and rate performance. During the charging/discharging process, the evolution of morphology and composition of the composite are analyzed by a set of ex situ methods. This synergistic anchoring effect between WS₂ nanosheets and HB CNFs is capable of effectively restraining volume expansion from the metal ions intercalation/deintercalation process and improving the cycling stability and rate performance in LIBs and SIBs.     

SnO2 Quantum Dots: Rational Design to Achieve Highly Reversible Conversion Reaction and Stable Capacities for Lithium and Sodium Storage

SnO₂ has been considered as a promising anode material for lithium‐ion batteries (LIBs) and sodium ion batteries (SIBs), but challenging as well for the low‐reversible conversion reaction and coulombic efficiency. To address these issues, herein, SnO₂ quantum dots (≈5 nm) embedded in porous N‐doped carbon matrix (SnO₂/NC) are developed via a hydrothermal step combined with a self‐polymerization process at room temperature. The ultrasmall size in quantum dots can greatly shorten the ion diffusion distance and lower the internal strain, improving the conversion reaction efficiency and coulombic efficiency. The rich mesopores/micropores and highly conductive N‐doped carbon matrix can further enhance the overall conductivity and buffer effect of the composite. As a result, the optimized SnO₂/NC‐2 composite for LIBs exhibits a high coulombic efficiency of 72.9%, a high discharge capacity of 1255.2 mAh g^?1 at 0.1 A g^?1 after 100 cycles and a long life‐span with a capacity of 753 mAh g^?1 after 1500 cycles at 1 A g^?1. The SnO₂/NC‐2 composite also displays excellent performance for SIBs, delivering a superior discharge capacity of 212.6 mAh g^?1 at 1 A g^?1 after 3000 cycles. These excellent results can be of visible significance for the size effect of the uniform quantum dots.     

Efficient Laser‐Induced Construction of Oxygen‐Vacancy Abundant Nano‐ZnCo2O4/Porous Reduced Graphene Oxide Hybrids toward Exceptional Capacitive Lithium Storage

Recently, binary ZnCo₂O₄ has drawn enormous attention for lithium‐ion batteries (LIBs) as attractive anode owing to its large theoretical capacity and good environmental benignity. However, the modest electrical conductivity and serious volumetric effect/particle agglomeration over cycling hinder its extensive applications. To address the concerns, herein, a rapid laser‐irradiation methodology is firstly devised toward efficient synthesis of oxygen‐vacancy abundant nano‐ZnCo₂O₄/porous reduced graphene oxide (rGO) hybrids as anodes for LIBs. The synergistic contributions from nano‐dimensional ZnCo₂O₄ with rich oxygen vacancies and flexible rGO guarantee abundant active sites, fast electron/ion transport, and robust structural stability, and inhibit the agglomeration of nanoscale ZnCo₂O₄, favoring for superb electrochemical lithium‐storage performance. More encouragingly, the optimal L‐ZCO@rGO‐30 anode exhibits a large reversible capacity of ≈1053 mAh g^?1 at 0.05 A g^?1, excellent cycling stability (≈746 mAh g^?1 at 1.0 A g^?1 after 250 cycles), and preeminent rate capability (≈686 mAh g^?1 at 3.2 A g^?1). Further kinetic analysis corroborates that the capacitive‐controlled process dominates the involved electrochemical reactions of hybrid anodes. More significantly, this rational design holds the promise of being extended for smart fabrication of other oxygen‐vacancy abundant metal oxide/porous rGO hybrids toward advanced LIBs and beyond.     

Mechanochemical Synthesis of γ‐Graphyne with Enhanced Lithium Storage Performance

γ‐Graphyne is a new nanostructured carbon material with large theoretical Li⁺ storage due to its unique large conjugate rings, which makes it a potential anode for high‐capacity lithium‐ion batteries (LIBs). In this work, γ‐graphyne‐based high‐capacity LIBs are demonstrated experimentally. γ‐Graphyne is synthesized through mechanochemical and calcination processes by using CaC₂ and C₆Br₆. Brunauer–Emmett–Teller, atomic force microscopy, X‐ray photoelectron spectroscopy, solid‐state ¹³C NMR and Raman spectra are conducted to confirm its morphology and chemical structure. The sample presents 2D mesoporous structure and is exactly composed of sp and sp²‐hybridized carbon atoms as the γ‐graphyne structure. The electrode shows high Li⁺ storage (1104.5 mAh g^?1 at 100 mA g^?1) and rate capability (435.1 mAh g^?1 at 5 A g^?1). The capacity retention can be up to 948.6 (200 mA g^?1 for 350 cycles) and 730.4 mAh g^?1 (1 A g^?1 for 600 cycles), respectively. These excellent electrochemical performances are ascribed to the mesoporous architecture, large conjugate rings, enlarged interplanar distance, and high structural integrity for fast Li⁺ diffusion and improved cycling stability in γ‐graphyne. This work provides an environmentally benign and cost‐effective mechanochemical method to synthesize γ‐graphyne and demonstrates its superior Li⁺ storage experimentally.     

Birnessite Nanosheet Arrays with High K Content as a High‐Capacity and Ultrastable Cathode for K‐Ion Batteries

Potassium‐ion batteries (PIBs) are one of the emerging energy‐storage technologies due to the low cost of potassium and theoretically high energy density. However, the development of PIBs is hindered by the poor K⁺ transport kinetics and the structural instability of the cathode materials during K⁺ intercalation/deintercalation. In this work, birnessite nanosheet arrays with high K content (K_0.77MnO₂?0.23H₂O) are prepared by “hydrothermal potassiation” as a potential cathode for PIBs, demonstrating ultrahigh reversible specific capacity of about 134 mAh g^?1 at a current density of 100 mA g^?1, as well as great rate capability (77 mAh g^?1 at 1000 mA g^?1) and superior cycling stability (80.5% capacity retention after 1000 cycles at 1000 mA g^?1). With the introduction of adequate K⁺ ions in the interlayer, the K‐birnessite exhibits highly stabilized layered structure with highly reversible structure variation upon K⁺ intercalation/deintercalation. The practical feasibility of the K‐birnessite cathode in PIBs is further demonstrated by constructing full cells with a hard–soft composite carbon anode. This study highlights effective K⁺‐intercalation for birnessite to achieve superior K‐storage performance for PIBs, making it a general strategy for developing high‐performance cathodes in rechargeable batteries beyond lithium‐ion batteries.     

Strong Coupling of MoS2 Nanosheets and Nitrogen‐Doped Graphene for High‐Performance Pseudocapacitance Lithium Storage

Layered material MoS₂ is widely applied as a promising anode for lithium‐ion batteries (LIBs). Herein, a scalable and facile dopamine‐assisted hydrothermal technique for the preparation of strongly coupled MoS₂ nanosheets and nitrogen‐doped graphene (MoS₂/N‐G) composite is developed. In this composite, the interconnected MoS₂ nanosheets are well wrapped onto the surface of graphene, forming a unique veil‐like architecture. Experimental results indicate that dopamine plays multiple roles in the synthesis: a binding agent to anchor and uniformly disperse MoS₂ nanosheets, a morphology promoter, and the precursor for in situ nitrogen doping during the self‐polymerization process. Density functional theory calculations further reveal that a strong interaction exists at the interface of MoS₂ nanosheets and nitrogen‐doped graphene, which facilitates the charge transfer in the hybrid system. When used as the anode for LIBs, the resulting MoS₂/N‐G composite electrode exhibits much higher and more stable Li‐ion storage capacity (e.g., 1102 mAh g^?1 at 100 mA g^?1) than that of MoS₂/G electrode without employing the dopamine linker. Significantly, it is also identified that the thin MoS₂ nanosheets display outstanding high‐rate capability due to surface‐dominated pseudocapacitance contribution.     

Peapod‐like Li3VO4/N‐Doped Carbon Nanowires with Pseudocapacitive Properties as Advanced Materials for High‐Energy Lithium‐Ion Capacitors

Lithium ion capacitors are new energy storage devices combining the complementary features of both electric double‐layer capacitors and lithium ion batteries. A key limitation to this technology is the kinetic imbalance between the Faradaic insertion electrode and capacitive electrode. Here, we demonstrate that the Li₃VO₄ with low Li‐ion insertion voltage and fast kinetics can be favorably used for lithium ion capacitors. N‐doped carbon‐encapsulated Li₃VO₄ nanowires are synthesized through a morphology‐inheritance route, displaying a low insertion voltage between 0.2 and 1.0 V, a high reversible capacity of ≈400 mAh g^?1 at 0.1 A g^?1, excellent rate capability, and long‐term cycling stability. Benefiting from the small nanoparticles, low energy diffusion barrier and highly localized charge‐transfer, the Li₃VO₄/N‐doped carbon nanowires exhibit a high‐rate pseudocapacitive behavior. A lithium ion capacitor device based on these Li₃VO₄/N‐doped carbon nanowires delivers a high energy density of 136.4 Wh kg^?1 at a power density of 532 W kg^?1, revealing the potential for application in high‐performance and long life energy storage devices.     

A Flexible Film toward High‐Performance Lithium Storage: Designing Nanosheet‐Assembled Hollow Single‐Hole Ni–Co–Mn–O Spheres with Oxygen Vacancy Embedded in 3D Carbon Nanotube/Graphene Network

Ternary transition metal oxides (TMOs) are highly potential electrode materials for lithium ion batteries (LIBs) due to abundant defects and synergistic effects with various metal elements in a single structure. However, low electronic/ionic conductivity and severe volume change hamper their practical application for lithium storage. Herein, nanosheet‐assembled hollow single‐hole Ni–Co–Mn oxide (NHSNCM) spheres with oxygen vacancies can be obtained through a facile hydrothermal reaction, which makes both ends of each nanosheet exposed to sufficient free space for volume variation, electrolyte for extra active surface area, and dual ion diffusion paths compared with airtight hollow structures. Furthermore, oxygen vacancies could improve ion/electronic transport and ion insertion/extraction process of NHSNCM spheres. Thus, oxygen‐vacancy‐rich NHSNCM spheres embedded into a 3D porous carbon nanotube/graphene network as the anode film ensure efficient electrolyte infiltration into both the exterior and interior of porous and open spheres for a high utilization of the active material, showing an excellent electrochemical performance for LIBs (1595 mAh g^?1 over 300 cycles at 2 A g^?1, 441.6 mAh g^?1 over 4000 cycles at 10 A g^?1). Besides, this straightforward synthetic method opens an efficacious avenue for the construction of various nanosheet‐assembled hollow single‐hole TMO spheres for potential applications.     

Facile Synthesis of Ultrasmall CoS2 Nanoparticles within Thin N‐Doped Porous Carbon Shell for High Performance Lithium‐Ion Batteries

Cobalt sulfide (CoS₂) is considered one of the most promising alternative anode materials for high‐performance lithium‐ion batteries (LIBs) by virtue of its remarkable electrical conductivity, high theoretical capacity, and low cost. However, it suffers from a poor cycling stability and low rate capability because of its volume expansion and dissolution of the polysulfide intermediates in the organic electrolytes during the battery charge/discharge process. In this study, a novel porous carbon/CoS₂ composite is prepared by using nano metal–organic framework (MOF) templates for high‐preformance LIBs. The as‐made ultrasmall CoS₂ (15 nm) nanoparticles in N‐rich carbon exhibit promising lithium storage properties with negligible loss of capacity at high charge/discharge rate. At a current density of 100 mA g^?1, a capacity of 560 mA h g^?1 is maintained after 50 cycles. Even at a current density as high as 2500 mA g^?1, a reversible capacity of 410 mA h g^?1 is obtained. The excellent and highly stable battery performance should be attributed to the synergism of the ultrasmall CoS₂ particles and the thin N‐rich porous carbon shells derieved from nanosized MOF precusors.     

High Performance Lithium‐Ion Batteries Using Layered 2H‐MoTe2 as Anode

The major challenges faced by candidate electrode materials in lithium‐ion batteries (LIBs) include their low electronic and ionic conductivities. 2D van der Waals materials with good electronic conductivity and weak interlayer interaction have been intensively studied in the electrochemical processes involving ion migrations. In particular, molybdenum ditelluride (MoTe₂) has emerged as a new material for energy storage applications. Though 2H‐MoTe₂ with hexagonal semiconducting phase is expected to facilitate more efficient ion insertion/deinsertion than the monoclinic semi‐metallic phase, its application as an anode in LIB has been elusive. Here, 2H‐MoTe₂, prepared by a solid‐state synthesis route, has been employed as an efficient anode with remarkable Li⁺ storage capacity. The as‐prepared 2H‐MoTe₂ electrodes exhibit an initial specific capacity of 432 mAh g^?1 and retain a high reversible specific capacity of 291 mAh g^?1 after 260 cycles at 1.0 A g^?1. Further, a full‐cell prototype is demonstrated by using 2H‐MoTe₂ anode with lithium cobalt oxide cathode, showing a high energy density of 454 Wh kg^?1 (based on the MoTe₂ mass) and capacity retention of 80% over 100 cycles. Synchrotron‐based in situ X‐ray absorption near‐edge structures have revealed the unique lithium reaction pathway and storage mechanism, which is supported by density functional theory based calculations.     

High Areal Capacity Li‐Ion Storage of Binder‐Free Metal Vanadate/Carbon Hybrid Anode by Ion‐Exchange Reaction

Storing more energy in a limited device area is very challenging but crucial for the applications of flexible and wearable electronics. Metal vanadates have been regarded as a fascinating group of materials in many areas, especially in lithium‐ion storage. However, there has not been a versatile strategy to synthesize flexible metal vanadate hybrid nanostructures as binder‐free anodes for Li‐ion batteries so far. A convenient and versatile synthesis of M_xV_yO_x+2.5y@carbon cloth (M = Mn, Co, Ni, Cu) composites is proposed here based on a two‐step hydrothermal route. As‐synthesized products demonstrate hierarchical proliferous structure, ranging from nanoparticles (0D), and nanobelts (1D) to a 3D interconnected network. The metal vanadate/carbon hybrid nanostructures exhibit excellent lithium storage capability, with a high areal specific capacity up to 5.9 mAh cm^?2 (which equals to 1676.8 mAh g^?1) at a current density of 200 mA g^?1. Moreover, the nature of good flexibility, mixed valence states, and ultrahigh mass loading density (over 3.5 mg cm^?2) all guarantee their great potential in compact energy storage for future wearable devices and other related applications.     

Room‐Temperature Liquid Metal Confined in MXene Paper as a Flexible,Freestanding, and Binder‐Free Anode for Next‐Generation Lithium‐Ion Batteries

Exploring flexible lithium‐ion batteries is required with the ever‐increasing demand for wearable and portable electronic devices. Selecting a flexible conductive substrate accompanying with closely coupled active materials is the key point. Here, a lightweight, flexible, and freestanding MXene/liquid metal paper is fabricated by confining 3 °C GaInSnZn liquid metal in the matrix of MXene paper without any binder or conductive additive. When used as anode for lithium‐ion cells, it can deliver a high discharge capacity of 638.79 mAh g^?1 at 20 mA g^?1. It also exhibits satisfactory rate capacities, with discharge capacities of 507.42, 483.33, 480.22, 452.30, and 404.47 mAh g^?1 at 50, 100, 200, 500, and 1000 mA g^?1, respectively. The cycling performance is obviously improved by slightly reducing the charge–discharge voltage range. The composite paper also has better electrochemical performance than liquid metal coated Cu foil. This study proposes a novel flexible anode by a clever combination of MXene paper and low‐melting point liquid metal, paving the way for next‐generation lithium‐ion batteries.     

Large‐Scale Fabrication of Core–Shell Structured C/SnO2 Hollow Spheres as Anode Materials with Improved Lithium Storage Performance

Due to the high theoretical capacity as high as 1494 mAh g^?1, SnO₂ is considered as a potential anode material for high‐capacity lithium–ion batteries (LIBs). Therefore, the simple but effective method focused on fabrication of SnO₂ is imperative. To meet this, a facile and efficient strategy to fabricate core–shell structured C/SnO₂ hollow spheres by a solvothermal method is reported. Herein, the solid and hollow structure as well as the carbon content can be controlled. Very importantly, high‐yield C/SnO₂ spheres can be produced by this method, which suggest potential business applications in LIBs field. Owing to the dual buffer effect of the carbon layer and hollow structures, the core–shell structured C/SnO₂ hollow spheres deliver a high reversible discharge capacity of 1007 mAh g^?1 at a current density of 100 mA g^?1 after 300 cycles and a superior discharge capacity of 915 mAh g^?1 at 500 mA g^?1 after 500 cycles. Even at a high current density of 1 and 2 A g^?1, the core–shell structured C/SnO₂ hollow spheres electrode still exhibits excellent discharge capacity in the long life cycles. Consideration of the superior performance and high yield, the core–shell structured C/SnO₂ hollow spheres are of great interest for the next‐generation LIBs.     

Ultrathin Nitrogen‐Doped Carbon Layer Uniformly Supported on Graphene Frameworks as Ultrahigh‐Capacity Anode for Lithium‐Ion Full Battery

The designable structure with 3D structure, ultrathin 2D nanosheets, and heteroatom doping are considered as highly promising routes to improve the electrochemical performance of carbon materials as anodes for lithium‐ion batteries. However, it remains a significant challenge to efficiently integrate 3D interconnected porous frameworks with 2D tunable heteroatom‐doped ultrathin carbon layers to further boost the performance. Herein, a novel nanostructure consisting of a uniform ultrathin N‐doped carbon layer in situ coated on a 3D graphene framework (NC@GF) through solvothermal self‐assembly/polymerization and pyrolysis is reported. The NC@GF with the nanosheets thickness of 4.0 nm and N content of 4.13 at% exhibits an ultrahigh reversible capacity of 2018 mA h g^?1 at 0.5 A g^?1 and an ultrafast charge–discharge feature with a remarkable capacity of 340 mA h g^?1 at an ultrahigh current density of 40 A g^?1 and a superlong cycle life with a capacity retention of 93% after 10 000 cycles at 40 A g^?1. More importantly, when coupled with LiFePO₄ cathode, the fabricated lithium‐ion full cells also exhibit high capacity and excellent rate and cycling performances, highlighting the practicability of this NC@GF.     

Graphitic Carbon Nitride (g‐C3N4)‐Derived N‐Rich Graphene with Tuneable Interlayer Distance as a High‐Rate Anode for Sodium‐Ion Batteries

Heteroatom‐doped carbon materials with expanded interlayer distance have been widely studied as anodes for sodium‐ion batteries (SIBs). However, it remains unexplored to further enlarge the interlayer spacing and reveal the influence of heteroatom doping on carbon nanostructures for developing more efficient SIB anode materials. Here, a series of N‐rich few‐layer graphene (N‐FLG) with tuneable interlayer distance ranging from 0.45 to 0.51 nm is successfully synthesized by annealing graphitic carbon nitride (g‐C₃N₄) under zinc catalysis and selected temperature (T = 700, 800, and 900 °C). More significantly, the correlation between N dopants and interlayer distance of resultant N‐FLG‐T highlights the effect of pyrrolic N on the enlargement of graphene interlayer spacing, due to its stronger electrostatic repulsion. As a consequence, N‐FLG‐800 achieves the optimal properties in terms of interlayer spacing, nitrogen configuration and electronic conductivity. When used as an anode for SIBs, N‐FLG‐800 shows remarkable Na⁺ storage performance with ultrahigh rate capability (56.6 mAh g^?1 at 40 A g^?1) and excellent long‐term stability (211.3 mAh g^?1 at 0.5 A g^?1 after 2000 cycles), demonstrating the effectiveness of material design.     

Solvent‐Free Synthesis of Uniform MOF Shell‐Derived Carbon Confined SnO2/Co Nanocubes for Highly Reversible Lithium Storage

Tin dioxide (SnO₂) has attracted much attention in lithium‐ion batteries (LIBs) due to its abundant source, low cost, and high theoretical capacity. However, the large volume variation, irreversible conversion reaction limit its further practical application in next‐generation LIBs. Here, a novel solvent‐free approach to construct uniform metal–organic framework (MOF) shell‐derived carbon confined SnO₂/Co (SnO₂/Co@C) nanocubes via a two‐step heat treatment is developed. In particular, MOF‐coated CoSnO₃ hollow nanocubes are for the first time synthesized as the intermediate product by an extremely simple thermal solid‐phase reaction, which is further developed as a general strategy to successfully obtain other uniform MOF‐coated metal oxides. The as‐synthesized SnO₂/Co@C nanocubes, when tested as LIB anodes, exhibit a highly reversible discharge capacity of 800 mAh g^?1 after 100 cycles at 200 mA g^?1 and excellent cycling stability with a retained capacity of 400 mAh g^?1 after 1800 cycles at 5 A g^?1. The experimental analyses demonstrate that these excellent performances are mainly ascribed to the delicate structure and a synergistic effect between Co and SnO₂. This facile synthetic approach will greatly contribute to the development of functional metal oxide‐based and MOF‐assisted nanostructures in many frontier applications.     

Covalent‐Organic‐Framework‐Based Li–CO2 Batteries

Covalent organic frameworks (COFs) are an emerging class of porous crystalline materials constructed from designer molecular building blocks that are linked and extended periodically via covalent bonds. Their high stability, open channels, and ease of functionalization suggest that they can function as a useful cathode material in reversible lithium batteries. Here, a COF constructed from hydrazone/hydrazide‐containing molecular units, which shows good CO₂ sequestration properties, is reported. The COF is hybridized to Ru‐nanoparticle‐coated carbon nanotubes, and the composite is found to function as highly efficient cathode in a Li–CO₂ battery. The robust 1D channels in the COF serve as CO₂^– and lithium‐ion‐diffusion channels and improve the kinetics of electrochemical reactions. The COF‐based Li–CO₂ battery exhibits an ultrahigh capacity of 27 348 mAh g^?1 at a current density of 200 mA g^?1, and a low cut‐off overpotential of 1.24 V within a limiting capacity of 1000 mAh g^?1. The rate performance of the battery is improved considerably with the use of the COF at the cathode, where the battery shows a slow decay of discharge voltage from a current density of 0.1 to 4 A g^?1. The COF‐based battery runs for 200 cycles when discharged/charged at a high current density of 1 A g^?1.