共查询到20条相似文献,搜索用时 31 毫秒
1.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2003,129(8):637-644
A computationally simple method is proposed for the estimation of transmissivity and storage coefficient from only residual drawdowns at an observation well, the calculations for which can be performed using a calculator. The method does not require the last pumping drawdown, however, duration of pumping is required. Different estimates of storage coefficient during pumping and recovery can be obtained using the new method if applied on such data sets affected by the hysteresis in storage coefficient during pumping versus recovery. The new method may be suited for advanced analysis of pumping/residual drawdowns, such as storage coefficient increasing with recovery. It is able to identify the nonideal aquifer condition (other than infinite confined aquifer) from only residual drawdowns if applied on such data. It can yield reliable estimates of aquifer parameters, which are as good as that obtained using an optimization approach developed previously by the author. 相似文献
2.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2009,135(1):102-107
A computationally simple semianalytical model is proposed for calculating the drawdown due to pumping a well tapping two aquifers separated by an aquiclude with no cross flow. The new model can take into account the transient pumping discharge. Equations are proposed for calculating the transient contributions of the aquifers to the pumped discharge and drawdowns in aquifers. The residual drawdowns in the aquifers and the aquifer contributions during recovery period can also be obtained using the proposed model. Based upon a similar principle, another model is also developed that can consider the effect of the well storage. The proposed models can be used to calculate drawdowns neglecting or considering the well storage, in the case of transient pumping from two aquifers having different values of transmissivity and storage coefficient. It is hoped that the new models would be of help to the field engineers and practitioners. 相似文献
3.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2007,133(4):414-416
A computationally simple and accurate algebraic approximation of the well function for large diameter wells is proposed. This approximation can be used to calculate drawdown in a large diameter well due to steady pumping. Using this approximation, a method is proposed for calculating drawdowns in large diameter wells due to unsteady pumping discharge. The proposed method is also applicable for calculating residual drawdowns in large diameter wells. In principle, the proposed method that uses the approximation of the well function should yield more accurate results than the previously proposed kernel methods. 相似文献
4.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2007,133(4):411-413
An optimization method is proposed for estimating the storage coefficient and transmissivity of an aquifer from drawdowns in large diameter wells consequent to an unsteady pumping. The concept of an optimal time step size is propagated in the proposed method. The estimate of the aquifer parameters corresponding to the optimal time step size is termed final estimate. The estimates for any other time step size are not reliable. The proposed method can also take into account the residual drawdowns. The application of the method is illustrated using an example. 相似文献
5.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2008,134(1):107-110
A method is proposed for identifying the head loss from the early drawdowns at the pumped well and an observation well. The new method is computationally simple and the calculations can be performed even on a hand-held calculator. The previously proposed methods for identifying the head loss requires a long duration pumping test, while the new method requires only a short duration pumping test. The use of the proposed method would save time and money and would be of help to field and practicing engineers. A nondimensional coefficient of head loss is also proposed, which permits a meaningful comparison of the efficiency conditions of different wells. 相似文献
6.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2008,134(4):515-520
A diagnostic curve of unimodal shape is developed for identifying the confined aquifer parameters from early drawdowns. A scaled well function is proposed for the diagnostic curve and computationally simple functions are developed for its accurate approximation. The diagnostic curve may be viewed as an alteration of the Theis’ curve or as the generalization of a previous approach proposed by the writer. Plotting the pumping test data in a convenient form and matching it to the diagnostic curve with a parallel shift of axes identify the aquifer parameters. The unimodal shape of the diagnostic curve facilitates matching and reduces the personal errors. The proposed method is simple, easy to apply, and yields accurate estimates of aquifer parameters from only early drawdowns, which would save considerable time and money involved in conducting a long-duration pumping test. The estimates obtained using the new method are as good as those obtained from much more complex methods. The new method does not require either the initial guess for the parameter values or repetitive evaluation of the well function. 相似文献
7.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2006,132(1):77-79
A computationally simple kernel method is proposed for obtaining drawdowns due to unsteady pumping of large diameter wells. The kernels can be worked out even on a hand-held calculator. The new method can also be used to obtain residual drawdowns. The new method yields results as good as those obtained using earlier methods. 相似文献
8.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2008,134(6):861-863
A computationally simple approximation of the Hantush M function is proposed. Using this approximation, an optimization method is proposed for identifying the aquifer parameters from early drawdowns around partially penetrating wells. The aquifer parameters are hydraulic conductivity and specific storage. The application of the method is illustrated using a field example. The proposed method results in a 120-fold saving in time when compared to the prior method. It is hoped that the proposed approximation and method will be of help to the field engineers and practitioners. 相似文献
9.
Louis H. Motz 《Canadian Metallurgical Quarterly》2002,128(5):298-304
One-dimensional horizontal flow in a semiinfinite confined aquifer can be described in terms of mathematical solutions that relate drawdown in the aquifer to aquifer parameters and flow into or out of a line sink. A new solution that considers the effects of a low-permeability skin along with storage in a finite-width sink is developed for the leaky-aquifer case. A coefficient Sk is defined to represent the skin effect for one-dimensional flow. The transient solution, which is obtained by inverting the Laplace-space solution using the Stehfest numerical algorithm, calculates drawdowns in the sink as well as in the aquifer. A nondimensional drain function D(u,x/B,A/x,Sk/x)q is defined based on the solution. Selected type curves for the drain function are plotted, and a match-point procedure is described that is based on matching observed drawdowns at observation wells to an appropriate type curve. The match-point procedure is illustrated by fitting simulated drawdown data to a type curve and determining the aquifer parameters. The drawdown solution is also represented by dimensional time–drawdown plots, which can be used to determine aquifer parameters by adjusting the parameters until model-calculated drawdowns match observed values. This new solution can be used to analyze drawdowns that result from a canal pumping test in which the discharge from the canal is derived from water stored in the canal and from a leaky aquifer and in which the drawdowns are affected by storage and a low-permeability skin in the canal. 相似文献
10.
Diagnostic Curves for Identifying Leaky Aquifer Parameters with or without Aquitard Storage 总被引:1,自引:0,他引:1
Sushil K. Singh 《Canadian Metallurgical Quarterly》2010,136(1):47-57
Two sets of unimodal diagnostic curves, one set assumes no aquitard storage and the other set assumes aquitard storage, are developed for identifying the parameter of leaky aquifers from early drawdowns, which yields accurate estimates of the parameters and lessens the subjectivity due to personal errors. The proposed diagnostic curve method is simple, easy to apply, and is based on matching of the diagnostically plotted observed drawdowns to an appropriate diagnostic curve. The new method is simple, easy to apply, does not require either the initial guess for the parameter values or repetitive evaluation of the leaky aquifer well function, and outperforms the conventional curve-matching, optimization, extended Kalman filter, and artificial neural network methods. The proposed set of diagnostic curves has a good diagnostic property and is able to easily identify nonideal conditions. The new method suggests a shorter duration pumping test, which would save time, money, and water. It is hoped that the proposed method would be useful to the field engineers and practitioners. 相似文献
11.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2001,127(4):280-285
The common field problem of identifying and locating impervious aquifer boundaries is generally solved by analyzing the pump-test data. The estimate of the distance between the image well and the observation well (r′) is required for locating the boundary. Popular methods of estimating r′ either use the concept of fully developed two straight lines or rely on curve matching. Curve-matching methods are subjective and involve errors due to personal judgment. A very long duration pump test is required in order that the second straight line is developed. In many cases, the first straight line is not developed at all, especially when the observation well is at a greater distance from the pumped well. In this paper, a derivative-based robust optimization method has been proposed for the identification of aquifer parameters (transmissivity, T and storage coefficient, S) and r′ from the drawdowns observed at an observation well. It returns unbiased estimates of the parameters (T, S, and r′) even with a poor initial guess. The method can yield the estimates of the parameters from shorter duration pump-test data, thus saving time and money involved in conducting the pump test with the purpose of identifying r′. It is observed that the hydraulic diffusivity (T∕S) of the aquifer and r′ can be estimated even when the constant rate of pumping is not known. 相似文献
12.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2008,134(3):409-413
The existing equation applicable for large diameter wells in confined aquifers is transformed into a convenient form and a set of semilogarithmic diagnostic curves is developed for identifying the aquifer parameters (storage coefficient and transmissivity) from early drawdowns in large diameter wells. A scaled well function is proposed for the diagnostic curves. The aquifer parameters are estimated by matching the diagnostically plotted drawdowns to one of the diagnostic curves by a parallel shift of only one axis. The substantial curvature of the diagnostic curves and shifting of only one axis facilitate matching and reduce subjectivity. The proposed method is an improvement over the existing matching methods. The new method can reliably identify the aquifer parameters from only early drawdowns and would result in a 100-fold saving in time and money. It is hoped that this method would be helpful to field engineers and practitioners. 相似文献
13.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2002,128(3):343-348
An optimization method is presented for simultaneous estimation of aquifer parameters and well loss parameters utilizing all the drawdowns observed during a variable rate pumping or multiple step pumping test. The proposed method does not require any graphical analysis. It is shown that a variable rate pumping test is a better substitute for the conventional step drawdown test to estimate well loss parameters. It suggests that the pumping rate may be changed frequently without waiting for a near steady state to be reached (or a selected duration, say 60 min) in each step of a conventional step drawdown test. This can result in a substantial saving of time and money involved in conducting a step drawdown test with a view to estimate well loss parameters. This gives a greater number of distinct discharges, which improves the estimates of the well loss parameters. Application of the method is demonstrated on published data sets, the results of which show that the parameters estimated using the new method are more reliable as compared to those obtained using prior methods. 相似文献
14.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2007,133(3):282-285
A simple approximation of the well function for a constant drawdown is developed. This approximation is used to estimate the storage coefficient and transmissivity of the aquifer from observed unsteady discharge under a constant drawdown condition, using an optimization method. Another simple approximation for calculating the total production volume during a time span is also developed. The developed approximations for the well function and production function are accurate within a maximum error of 0.7% for the practical range of the argument. 相似文献
15.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2007,133(3):279-281
Simple equations are proposed for estimating storage coefficient and transmissivity of an aquifer from drawdowns in large- diameter wells. The proposed method requires determination of the peak and time to peak of a unimodal curve. Using these values and utilizing the provided set of equations, the aquifer parameters are estimated through an iterative procedure. The proposed method is void of subjectivity involved in the previously proposed curve matching methods. Also, the new method can be used when the conventional curve matching methods cannot be applied to estimate the aquifer parameters. The new method can be used to estimate the aquifer parameters from the drawdown data observed only up to a time so that the peak could be determined. 相似文献
16.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2002,128(8):774-780
A simple method is proposed for simultaneous and explicit identification of confined aquifer parameters and boundaries from drawdowns measured at an observation well during a constant rate pumping test. The method requires the determination of peaks of unimodal curves. Only a little subjectivity is involved in the method as the peak is a well defined point. The method is applicable even when the first and second straight lines on the semilogarithmic characteristic drawdown curve are not fully developed. The calculations involved can be performed on a calculator. Results have also been presented for small arguments of the well functions defining the development of the straight lines. The times for initiation and development of straight lines are quantified. The minimum duration of a pumping test for a reliable identification of the aquifer parameters and boundaries using the proposed method is also quantified. Use of the new method suggests a much shorter duration pumping test for the accurate identification of aquifer parameters and boundaries. This would save considerable time and money. At least a 100-fold savings in time and money involved in a pumping test to locate a boundary is observed when compared to the use of the law of times in the Cooper-Jacob method. Application of the method to published data sets shows that reliable estimates of the aquifer parameters and distance to a boundary are obtained. 相似文献
17.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2006,132(5):508-512
A procedure for calculating the flow depletion from a finite length of a stream induced by a pumping well in an adjacent aquifer is developed. Four management cases of finite length of the stream including a basic case are considered. A “basic flow depletion factor” is defined, in terms of which the flow depletion factors for all cases are expressed. The basic flow depletion factor is twice the Hantush M function. A computationally simple and accurate practical approximation of the basic flow depletion factor is presented that encompasses the full practical range of the solutions. Using this approximation, an optimization method is proposed for the estimation of the aquifer hydraulic diffusivity and effective distance from the pumping well to the line of recharge from the measured temporal variation of stream flow depletion between two sections. During optimization, repeated computation of stream flow depletion is required; use of the proposed approximation simplifies the computation. 相似文献
18.
In order to carry out nonlinear dynamic analyses of fixed offshore structures in the frequency domain, polynomial approximations of the distributed drag term, u∣u∣, and inundation drag term, ηu∣u∣, of the Morison forces are studied. The methods of least-squares and moment-based approximations are considered for cases with and without current. Numerical results and analytical expressions of the polynomial coefficients are presented for the cubic approximations of u∣u∣ and quartic approximations of ηu∣u∣. The curve shapes, first four central moments, and probability density functions of the different approximations are evaluated and compared with the corresponding exact solutions. For the nonmonotonic inundation drag term with the current effect included, a hybrid polynomialization, based on the least-squares approximation for the odd-order polynomial coefficients and the moment-based approximation for the even-order coefficients, is proposed. 相似文献
19.
Sushil K. Singh 《Canadian Metallurgical Quarterly》2007,133(2):155-161
A semianalytical model is developed for computing drawdowns in and around a partially penetrating large diameter well. The new model can take into account an unsteady pumping discharge and thus drawdowns during recovery can be computed. This model can also yield the unsteady contributions from well and aquifer storages to the pumped discharge. While developing the model, the flow from the bottom of the well is also accounted. 相似文献
20.
A new accurate approximation for the well function for instantaneous charge of water for large diameter wells is proposed. Using this approximation with an optimization method, storage coefficient and transmissivity are estimated from slug test data on large diameter wells. The proposed method is void of the subjectivity of curve matching procedure. 相似文献