共查询到19条相似文献,搜索用时 109 毫秒
1.
2.
有机硅改性丙烯酸酯乳液的最新进展 总被引:6,自引:0,他引:6
综述了有机硅改性丙烯酸酯乳液的理论基础,介绍了有机硅改性丙烯酸酯乳液的几种实施方法、结构特点及技术现状。论述了硅对有机硅改性丙烯酸酯乳液的影响。并对有机硅改性丙烯酸酯乳液的未来方向作了展望。 相似文献
3.
4.
5.
6.
涂料用有机硅改性丙烯酸酯乳液的研究进展 总被引:1,自引:0,他引:1
介绍了合成丙烯酸酯乳液的原料以及方法、有机硅改性丙烯酸酯乳液(硅丙乳液)的改性方法,以及有机硅改性丙烯酸酯微乳液的发展状况,并对硅丙乳液的发展前景进行展望. 相似文献
7.
8.
9.
以过硫酸铵为引发剂,以OP-10和十二烷基苯磺酸钠为乳化剂,由丙烯酸酯与纳米SiO2制成高性能的改性丙烯酸酯乳液。研究了以纳米SiO2改性丙烯酸酯乳液的合成工艺,讨论了温度、乳化剂、预乳化及加料方式对乳液性能的影响。对乳液进行了结构表征和性能测定,试验结果表明,改性后的丙烯酸酯乳液综合性能大大增强,质量符合国家标准GB/T1738-1993。 相似文献
10.
11.
介绍了核-壳乳液聚合、乳液互穿聚合物网络、无皂乳液聚合、微乳液与细乳液聚合等方法与技术在制备功能性丙烯酸酯乳液中的应用。阐述了有机硅、有机氟、聚氨酯、环氧树脂等改性方法用于制备功能性丙烯酸乳液的研究进展。详细介绍了功能性丙烯酸乳液在功能涂料、胶黏剂、皮革涂饰剂、油墨等领域的应用现状,提出了功能性丙烯酸酯乳液的发展趋势:采用新的聚合技术、改性技术制备具有附加值高、性能优异且环境友好的水性功能性乳液是今后丙烯酸酯乳液的主要发展方向。 相似文献
12.
13.
Silicone‐modified styrene–butyl acrylate copolymer latex was synthesized by emulsion copolymerization by using octamethylcyclotetrasiloxane (D4), styrene, and butyl acrylate as raw materials, potassium persulfate as initiator and propylmethacrylate triethoxysilane (KH‐570) as crosslinking agent. The infrared spectra studies showed that the vinyl monomers were completely copolymerized with D4. The prepared silicone‐modified copolymer latex with the interpenetrating polymer networks tended to have higher stability, and better toluene and water resistance than styrene–butyl acrylate latex. The glossiness of coated paper was improved with silicone‐modified copolymer latex, and it was at a maximum when D4 was about 3% of total monomers. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 333–336, 2001 相似文献
14.
丙烯酸酯改性水性聚氨酯的研究进展 总被引:5,自引:0,他引:5
详细介绍了丙烯酸酯改性水性聚氨酯的三种方法:共混改性,复合乳液共聚改性,接枝共聚改性, 综述了国内外丙烯酸酯改性水性聚氨酯的研究进展。 相似文献
15.
交联型丙烯酸酯乳液聚合稳定性的研究 总被引:1,自引:0,他引:1
采用半连续种子乳液聚合技术和预乳化工艺制备改性丙烯酸酯乳液。重点讨论了乳化体系、加料方式、聚合温度、电解质以及交联单体等因素对聚合稳定性的影响,并简要介绍了其控制方法。 相似文献
16.
17.
氟代聚丙烯酸酯改性阳离子型聚氨酯乳液的制备 总被引:1,自引:0,他引:1
以丙烯酸十二氟庚酯(FA)、丙烯酸羟丙酯(HpAA)为单体,通过偶氮二异丁腈(AIBN)引发聚丙烯酸酯自由基在交联的聚氨酯预聚体中进行聚合,并用N-甲基二乙醇胺(MDEA)进行亲水基扩链,溶液聚合相转化法制得新型氟代聚丙烯酸酯改性阳离子型聚氨酯复合乳液(FPUA)。对聚合物结构、乳胶粒形态进行表征。结果表明,以丙酮为溶剂,n_(NCO)/n_(OH)=1.3,MDEA质量分数6.5%、FA质量分数为8%时能得到半透明蓝光、稳定性良好的核-壳结构乳液,FPUA胶膜拉伸强度为19 MPa,吸水率为6.9%,接触角为101°,产品的耐水性优良。 相似文献
18.
Alkoxysilane-functionalized poly (styrene-co-butyl acrylate) latex was prepared via miniemulsion copolymerization of γ-methacryloxypropyltrimethoxysilane (MPS), styrene and butyl acrylate using AIBN at neutral condition. The effects of initiator types, pH values, and MPS contents on the premature cross-linking of the latex particles and the mechanical properties of the films were investigated by the swelling experiments and dynamic mechanical analysis. It was found that the storage modulus of the latex films and the glass transition temperature (Tg) increased with increasing MPS content. The acidification of latex prior to film formation and annealing the latex films could improve the mechanical properties of the films. 相似文献