Synthesis RMn2O5 (R = Gd and Sm) nano- and microstructures by a simple hydrothermal method

Single-phase RMn₂O₅ (R = Gd and Sm) nano- and microstructures have been successfully synthesized via a simple hydrothermal process at 250 °C for 24 h using NaOH as mineralizer. X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selective area electron diffraction patterns (SAED) were used to characterize the as-synthesized GdMn₂O₅ and SmMn₂O₅ samples. The effect of NaOH concentration and the molar ratio of Mn²⁺/Mn⁷⁺ on the morphology and size of the final products was studied, and a possible formation mechanism of RMn₂O₅ (R = Gd and Sm) nanoplates and nanorods under hydrothermal conditions was proposed.     

Hydrothermal synthesis and luminescent properties of Y2O3:Tb and Gd2O3:Tb microrods

One-dimensional (1D) Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ microrods have been successfully prepared through a large-scale and facile hydrothermal method followed by a subsequent calcination process in N₂/H₂ mixed atmosphere. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (IR), thermogravimetric analysis (TGA), energy-dispersive X-ray spectra (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-formed products via the hydrothermal process could transform to cubic Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ with the same morphology and slight shrinking in size after a postannealing process. Both Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ microrods exhibit strong green emission corresponding to ⁵D₄ → ⁷F₅ transition (542 nm) of Tb³⁺ under UV light excitation (307 and 258 nm, respectively), and low-voltage electron beam excitation (1.5 → 3.5 kV), which have potential applications in fluorescent lamps and field emission displays.     

Nanocomposite BaSO4/Y2O3:Eu powders prepared by heterogeneous nucleation processing

Forming core–shell-structured phosphor particles is an effect way to improve the properties of the rare-earth-doped inorganic luminescent systems, as well as to achieve a reduction in the amount of expensive rare earth metal. Heterogeneous nucleation processing is a commonly used method to prepared core–shell-structured particles. A nanocomposite BaSO₄/Y₂O₃:Eu³⁺ powder was prepared by coating BaSO₄ submicrospheres with nano-Y₂O₃:Eu³⁺ particles via heterogeneous nucleation processing. Thermogravimetric analysis and differential scanning calorimetry (TGA/DSC) were utilized to reveal the mechanism of the homogenous precipitation reaction process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) were utilized to characterize the BaSO₄/Y₂O₃:Eu³⁺ core–shell-structured phosphor particles. By controlling the hydrolysis of urea, BaSO₄ particles are well coated with the shell of Y₂O₃:Eu³⁺, and the nucleation of coating materials is predominantly heterogeneous rather than homogeneous. Photoluminescence spectra were utilized as well. The BaSO₄/Y₂O₃:Eu³⁺ particles show a red emission corresponding to ⁵D₀–⁷F₂ of Eu³⁺ under the excitation of ultraviolet.     

Synthesis and characterization of nanocrystalline manganese pyrophosphate Mn2P2O7

Mn₂P₂O₇ polyhedral particles were synthesized by simple and cost-effective method using manganese nitrate hydrate and phosphoric acid in the presence of nitric acid with further calcinations at the temperature of 800 °C. The crystallite size obtained from X-ray line broadening is 31 ± 13 nm for the Mn₂P₂O₇. The X-ray diffraction and SEM results indicated that the synthesized nanoparticles have only the structure without the presence of any other phase impurities. The FT-IR and FT-Raman spectra show characteristic bands of the P₂O₇⁴⁻ anion. The UV–Vis–NIR spectrum confirms the octahedral coordination of Mn²⁺ ion.     

Synthesis and electrochemical properties of Co3O4 nanofibers as anode materials for lithium-ion batteries

Co₃O₄ nanofibers as anode materials for lithium-ion batteries were prepared from sol precursors by using electrospinning. The morphology, structure and electrochemical properties of Co₃O₄ nanofibers were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and charge-discharge experiments. The results show that Co₃O₄ nanofibers possessed typical spinel structure with average diameter of 200 nm. The initial capacity of Co₃O₄ nanofibers was 1336 mAhg^− 1 and the capacity reached 604 mAhg^− 1 up to 40 cycles. It was suggested that the high reversible capacity could be ascribed to the high surface area offered by the nanofibers' structure.     

Synthesis and photoluminescence of new phosphors M2(Mg, Zn)Si2O7:Mn (M = Ca, Sr, Ba)

New phosphors M₂(Mg, Zn)Si₂O₇:Mn²⁺ (M = Ca, Sr, Ba) were prepared by sol-gel process, and their luminescent properties in ultraviolet and vacuum ultraviolet region were investigated. The results showed that the (Ca, Sr, Ba)₂MgSi₂O₇:Mn²⁺ samples did not emit any visible light; the Sr₂ZnSi₂O₇:Mn²⁺ and Ca₂ZnSi₂O₇:Mn²⁺ samples showed green light. The Ba₂ZnSi₂O₇:Mn²⁺ sample mainly showed green light under 254 nm excitation and red light under 147 nm excitation. The different emission was due to the Mn²⁺ ions occupied different sites, which were excited selectively. Among the three phosphors Sr₂ZnSi₂O₇:Mn²⁺ showed the highest green emission intensity, and its decay time was shorter than that of Zn₂SiO₄:Mn²⁺ under 147 nm excitation.     

The preparation,characterization and optical properties of Cd2V2O7 and CdCO3 compounds

Cadmium vanadium oxides (Cd₂V₂O₇) and Cadmium carbonates (CdCO₃) were synthesized via a facile hydrothermal method. X-ray diffraction (XRD), Raman spectroscopy, infrared spectrometer (IR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) were employed to characterize the structure, morphology and chemical state of the samples, respectively. The photoluminescence (PL) properties of the as-synthesized Cd₂V₂O₇ and CdCO₃ were measured at room temperature using an excitation wavelength of 325 nm. The Cd₂V₂O₇ shows two visible light emission centers located at 589 and 637 nm, which are supposed to be relevant to local defects in Cd₂V₂O₇. The CdCO₃ shows three emission centers located at 408, 530 and 708 nm, which are supposed to be relevant to the electron transition from the conduction band to valence band and defect related energy level.     

Fluorine-doped LiNi0.5Mn1.5O4 for 5 V cathode materials of lithium-ion battery

Fluorine-doped 5 V cathode materials LiNi_0.5Mn_1.5O_4−xF_x (0.05 ≤ x ≤ 0.2) have been prepared by sol-gel and post-annealing treatment method. The results from X-ray diffraction and scanning electron microscopy (SEM) indicate that the spinel structure changes little after fluorine doping, but the particle size varies with fluorine doping and the preparation conditions. The electrochemical measurements show that stable cycling performance can be obtained when the fluorine amount x is higher than 0.1, but the specific capacity is decreased and 4 V plateau capacity resulting from a conversion of Mn⁴⁺/Mn³⁺ remains. Moreover, influence of the particle size on the reversible capacity of the electrode, especially on the kinetic property, has been examined.     

Shape evolution of Cu-doped Mn3O4 spinel microcrystals: influence of copper content

Spinel-type Cu-doped Mn₃O₄ microcrystals with various shapes were synthesized by hydrothermal method. The interrelation between the preparative conditions and the composition, structure, and morphology of the products were investigated using various analytical techniques, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and thermal gravimetric analysis. Results revealed that the introduction of Cu²⁺ ions into the reaction system promoted the formation of single phase Cu-doped Mn₃O₄. A gradual shape evolution from polyhedron to octahedron occurred upon increasing the additive copper content. Complete decolorization of organic dye (methylene blue) aqueous solution was achieved by treating the dye with Cu-doped Mn₃O₄ in acidic media, which shows the possible application of doped Mn₃O₄ as effective reagents for the degradation of organic contaminants in water.     

Photoluminescence and low-voltage cathodoluminescence characteristics of blue phosphor, ZnGa2O4:M (M = Na, Ag)

Photoluminescence and low-voltage cathodoluminescence characteristics of ZnGa₂O₄ phosphor doped with monovalent ions has been studied. Monovalent ions such as Na⁺ and Ag⁺ are incorporated into ZnGa₂O₄ lattices in order to increase the concentration of oxygen vacancies in the spinel lattice. By doping low concentrations of monovalent ions (Na⁺, Ag⁺) into ZnGa₂O₄, the self-activated blue luminescence originated from oxygen vacancies is enhanced. Also, the blue luminescence intensity is enhanced more along with a good color purity by annealing ZnGa₂O₄:Na⁺ in a reducing atmosphere, which is due to increasing the concentration of oxygen vacancies even more. The luminescence band at the UV region (λ_max=360 nm) does not become the major luminescence band by introducing Na⁺ ion into the ZnGa₂O₄ lattice, while the UV luminescence band becomes the major one by annealing the undoped ZnGa₂O₄ in a reducing atmosphere.     

Influence of calcination temperature on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol–gel-combustion processing

The detailed preparation process of Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ phosphor powders with red long afterglow by sol–gel-combustion method in the reducing atmosphere is reported. X-ray diffraction, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the effects of synthesis temperature on the crystal characteristics, morphology and luminescent properties of the as-synthesized Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors. The results reveal that Sr₃Al₂O₆ crystallizes completely when the combustion ash is sintered at 1200 °C. The excitation and the emission spectra indicate that the excitation broad-band lies chiefly in visible range and the phosphor powders emit strong light at 618 nm under the excitation of 472 nm. The light intensity and the light-lasting time of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors are increased when increasing the calcination temperatures from 1050 to 1200 °C. The afterglow of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors sintered at 1200 °C lasts for over 600 s when the excited source is cut off. The red emission mechanism is discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions.     

Luminescent properties of Sr2P2O7:Eu,Mn phosphor under near UV excitation

The phosphors in the system Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have strong absorption in the near UV region, which is suitable for excitation of ultraviolet light emitting diodes (UVLEDs). The orange-reddish emission of Mn²⁺ in these phosphors can be used as a red component in the tri-color system and may be enhanced by adjusting the Mn²⁺/Eu²⁺ ratio. The energy transfer from Eu²⁺ to Mn²⁺ is observed with a transfer efficiency of ∼0.45 and a critical distance of ∼10 Å. The results reveal that Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ phosphors could be used in white light UVLEDs.     

Photoluminescence properties of the rare-earth ions in the TiO2 host nanofibers prepared via electrospinning

Luminescent rare-earth (RE) ions doped TiO₂ nanofibers have been prepared by electrospinning of a mixture solution of rare-earth acetylacetone (RE(C₅H₇O₂)₃)/titanium tetraisopropoxide (Ti (OiPr)₄)/poly(vinyl pyrrolidone) (PVP) (RE = Eu, Er, Ce, Pr), followed by calcination at high temperature. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD) analyses demonstrated the morphology and the structure of the rare-earth doped TiO₂ nanofibers. Exciting the nanofibers results in an energy transfer from surface states of TiO₂ to that of the rare-earth ions and the photoluminescence is observed from the crystal field states of the rare-earth ions.     

Synthesis and photoluminescence properties of MgAl2O4:Mn hexagonal nanoplates

MgAl₂O₄:Mn²⁺ hexagonal nanoplates have been synthesized via a simple two-step method. The nanoplates have uniform hexagonal morphology with an average edge length of 1 μm and thickness of 30 nm. X-ray diffraction and various microscopic techniques indicate that MgAl₂O₄:Mn²⁺ nanoplates are single-crystal with multilayered morphology. The formation mechanism has also been discussed. Photoluminescence (PL) spectrum of the MgAl₂O₄:Mn²⁺ nanoplate shows a broad green emission band centered at 568 nm, which is assigned to the ⁴T₁ → ⁶A₁ transition of Mn²⁺ ion. The MgAl₂O₄:Mn²⁺ nanoplate is a promising candidate for efficient nanoscale optical material.     

Role of additives; sodium dodecyl sulphate and manganese chloride on morphology of Zn1−xMnxO nanoparticles and their photoluminescence properties

In the present study Zn_1−xMn_xO (x = 0, 0.05 and 0.1) nanoparticles (NPs) have been synthesised in aqueous solution phase at mild reaction temperature 100 °C in moderate alkaline medium (pH = 9.5), and the role of external additives; like sodium dodecyl sulphate and manganese chloride on the morphology and size of the products has been explored on the basis of transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectral analyses data. ZnO hexagonal nano-plates, core–shell like spherical/ellipsoidal Zn_0.95Mn_0.05O structures and thin sheets, thorn/needle mixed shaped Zn_0.9Mn_0.1O structures have been observed in TEM and SEM images. Zn(OH)₂ formed in moderate alkaline medium, converted to Zn(II) hydroxo complex ions on dissolution, which further recrystallizes to produce wurtzite ZnO at 100 °C. From XRD and EDX analysis, successful doping of Mn²⁺ ions at the Zn²⁺ sites in ZnO host has been proved. In the photoluminescence spectra, the observed blue shifts in NBE peaks and decrease of emissions intensity on Mn doping have thoroughly been discussed in the present investigation.     

Synthesis of layered Li1.2+x[Ni0.25Mn0.75]0.8−xO2 materials (0 ≤ x ≤ 4/55) via a new simple microwave heating method and their electrochemical properties

Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂ (0 ≤ x ≤ 4/55) was prepared by a new simple microwave heating method and the effect of extra Li⁺ content on electrochemistry of Li_1.2Ni_0.2Mn_0.6O₂ (x = 0) was firstly revealed. X-ray diffraction identified that they had layered α-NaFeO₂ structure (space group R-3m). Linear variation of lattice constant as a function of x value supported the formation of solid solution, that is, extra Li⁺ is possibly incorporated in structure of layered Li_1.2Ni_0.2Mn_0.6O₂ (x = 0), accompanying oxidization of Ni²⁺ to Ni³⁺ to form Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂ (0 ≤ x ≤ 4/55). This was confirmed by X-ray photoelectron spectroscopy that Ni³⁺ appeared and increased in content with increasing x value. Charge–discharge tests showed that Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂ (0 ≤ x ≤ 4/55) truly displayed different electrochemical properties (different initial charge–discharge plots, capacities and cycleability). Li_1.2Ni_0.2Mn_0.6O₂ (x = 0) in this work delivered the highest discharge capacity of 219 mAh g⁻¹ between 4.8 and 2.0 V. Increasing Li content (x value in Li_1.2+x[Ni_0.25Mn_0.75]_0.8−xO₂) reduced charge–discharge capacities, but significantly enhancing cycleability.     

Persistent luminescence of Eu and Dy doped barium aluminate (BaAl2O4:Eu,Dy) materials

Polycrystalline Eu²⁺ and Dy³⁺ doped barium aluminate materials, BaAl₂O₄:Eu²⁺,Dy³⁺, were prepared with solid state reactions at temperatures between 700 and 1500 °C. The influence of the thermal treatments on the stability, homogeneity and structure as well as to the UV-excited and persistent luminescence of the materials was investigated by X-ray powder diffraction, SEM imaging and infrared spectroscopies as well as by steady state luminescence spectroscopy and persistent luminescence decay curves, respectively. The IR spectra of the materials prepared at 250, 700, and 1500 °C follow the formation of BaAl₂O₄ composition whereas the X-ray powder diffraction of compounds revealed how the hexagonal structure was obtained. The morphology of the materials at high temperatures indicated important aggregation due to sintering. The luminescence decay of the quite narrow Eu²⁺ band at ca. 500 nm shows the presence of persistent luminescence after UV irradiation. The dopant (Eu²⁺) and co-dopant (Dy³⁺) concentrations affect the crystallinity and luminescence properties of the materials.     

Preparation of SrAl2O4: Eu, Dy nanometer phosphors by detonation method

SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer phosphors were synthesized by detonation method. The particle morphology and optical properties of detonation soot that was heated at different temperatures (600–1100 °C) had been studied systematically by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results indicated SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer powders in monoclinic system (a = 8.442, b = 8.822, c = 5.160, β = 93.415) can be synthesized by detonation method, when detonation soot was heated at 600–800 °C. The particle size of SrAl₂O₄: Eu²⁺, Dy³⁺ is 35 ± 15 nm. Compared with the solid-state reaction and sol-gel method, synthesis temperature of the detonation method is lower about 500 and 200 °C respectively. After being excited under UN lights, detonation soot and that heated at 600–1100 °C can emit a green light.     

Synthesis and photoluminescence properties of SrLu2O4:Eu superfine phosphor

Superfine powder SrLu₂O₄:Eu³⁺ was synthesized with a precursor prepared by an EDTA - sol-gel method at relatively low temperature using metal nitrate and EDTA as starting materials. The heat decomposition mechanism of the precursor, formation process of SrLu₂O₄:Eu³⁺and the properties of the particles were investigated by thermo-gravimetric (TG) - differential thermal analysis (DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) analyses. The results show that pure SrLu₂O₄:Eu³⁺ superfine powder has been produced after the precursor was calcinated at 900 °C for 2 h and has an elliptical shape and an average diameter of 80-100 nm. Upon excitation with 250 nm light, all the SrLu₂O₄:Eu³⁺ powders show red and orange emissions due to the 4f-4f transitions of Eu³⁺ ions. The highest photoluminescence intensity at 610 nm was found at a content of about 6 mol% Eu³⁺. Splitting of the ⁵D₀-⁷F₁ emission transition revealed that the Eu³⁺ ions occupied two nonequivalent sites in the crystallite by substituting Lu³⁺ ions.     

Multifunctional Zn0.99−xMn0.01CuxS nanowires: Structure, luminescence and magnetism

The wurtzite-type Zn_0.99−xMn_0.01Cu_xS (x = 0, 0.003, 0.01) nanowires were prepared by a simple hydrothermal method at 180 °C. The structure and morphology of the samples were characterized by X-ray diffraction (XRD), X-ray absorption fine structure (XAFS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), field emission scanning electron micrograph (FESEM) and X-ray photoelectron spectrum (XPS). The results showed that both the Mn²⁺ and Cu²⁺ ions substituted for the Zn²⁺ sites in the host ZnS. The ethylenediamine-mediated template was observed, which was used to explain the growth mechanism of the nanowires. The color-tunable emission can be obtained by adjusting the concentrations of Mn²⁺ and Cu²⁺ ions. The ferromagnetism was observed around room temperature.