Chemical,textural, rheological,and sensorial properties of wheyless feta cheese as influenced by replacement of milk protein concentrate with pea protein isolate

Replacement of milk protein with protein isolates from vegetable resources can significantly influence the characteristics of feta whey less cheese and also decrease the cost of final production. In this study, various blends of milk protein concentrate (MPC) and pea protein isolate (PPI) were mixed at levels of 12% MPC and 0% PPI (MP0), 10% MPC and 2% PPI (MP2), 9% MPC and 3% PPI (MP3), 8% MPC and 4% PPI (MP4), 7% MPC and 5% PPI (MP5), 6% MPC and 6% PPI (MP6) and used in the manufacture of wheyless feta cheese. The chemical, textural, rheological, and sensorial properties, as well as the microstructure of the cheese samples, were evaluated after 1, 15, and 30 days of storage. The general linear model procedure of SAS statistical software was used for statistical analysis. Duncan's multiple range tests was used to compare the means of different treatments. The results showed that all properties of the cheeses were influenced by different levels of PPI due to different total solids content. The use of high concentrations of PPI resulted in a more open protein network, softer structure and decreasing the storage (G′) and loss (G″) moduli in the cheeses. Sensory evaluation of the samples revealed that total score in terms of flavor, texture and overall acceptability was gradually decreased with increasing PPI levels, but still preferable for the panelists. Furthermore, for each sample, with increasing levels of PPI, the whiteness and the greenness were decreased, but the yellowness was increased.     

大豆分离蛋白对涂抹型再制干酪质构的影响

添加大豆蛋白可降低涂抹型再制干酪的成本，但也会对再制干酪的质构产生一定的影响。设计4因素3水平正交实验．应用TA—XT2i型物性分析仪考察添加了大豆蛋白后的再制干酪产品的质构变化，使用Statistix 8.0统计分析软件对实验结果进行统计分析并作出比较和对正交试验作极差分析。结果表明，4个因素在水平不同的9组正交实验的结果的差异性显著（p〈0.05），在极差分析中，4个因素对硬度的影响排序为D〉C〉A〉B；4个因素对剪切功的影响排序为D〉A〉B〉C；4个因素对粘着性的影响排序为A〉B〉D〉C；4个因素对感官评价的影响排序为A〉D〉C〉B。最后重做不同的最优组并再次测定各项指标，得到最好的组合为大豆蛋白添加量6％．黄油添加量10％，乳化盐添加量1、5％，加水量50％（均为质量分数，下同）。     

Effect of selected Hofmeister salts on textural and rheological properties of nonfat cheese

Three Hofmeister salts (HS; sodium sulfate, sodium thiocyanate, and sodium chloride) were evaluated for their effect on the textural and rheological properties of nonfat cheese. Nonfat cheese, made by direct acidification, were sliced into discs (diameter = 50 mm, thickness = 2 mm) and incubated with agitation (6 h at 22°C) in 50 mL of a synthetic Cheddar cheese aqueous phase buffer (pH 5.4). The 3 HS were added at 5 concentrations (0.1, 0.25, 0.5, 0.75, and 1.0 M) to the buffer. Post-incubation, cheese slices were air dried and equilibrated in air-tight bags for 18 h at 5°C before analysis. Small amplitude oscillatory rheology properties, including the dynamic moduli and loss tangent, were measured during heating from 5 to 85°C. Hardness was determined by texture profile analysis. Acid-base buffering was performed to observe changes in the indigenous insoluble (colloidal) calcium phosphate (CCP). Moisture content decreased with increasing HS concentration. Cheeses incubated in high concentrations of SCN⁻ softened earlier (i.e., loss tangent = 1) compared with other HS treatments. Higher melting temperature values were observed for cheeses incubated in high concentrations of SO₄²⁻. Hardness decreased in cheeses incubated in buffers with high concentrations of SCN⁻. The indigenous CCP profile of nonfat cheese was not greatly affected by incubation in Cl⁻ or SCN⁻, whereas buffers with high concentrations of SO₄²⁻ reduced the acid-base buffering contributed by CCP. The use of high concentrations (1.0 M) of SCN⁻ for incubation of cheeses resulted in a softer protein matrix at high temperatures due to the chaotropic effect of SCN⁻, which weakened hydrophobic interactions between CN. Cheese samples incubated in 1.0 M SO₄²⁻ buffers exhibited a stiffer protein matrix at high temperatures due to the kosmotropic effect of SO₄²⁻, which helped to strengthen hydrophobic interactions in the proteins during the heating step. This study showed that HS influenced the texture and rheology of nonfat cheese probably by altering the strength of hydrophobic interactions between CN.     

Effect of substituting whey cream for sweet cream on the textural and rheological properties of cream cheese

In the manufacture of cream cheese, sweet cream and milk are blended to prepare the cream cheese mix, although other ingredients such as condensed skim milk and skim milk powder may also be included. Whey cream (WC) is an underutilized fat source, which has smaller fat droplets and slightly different chemical composition than sweet cream. This study investigated the rheological and textural properties of cream cheeses manufactured by substituting sweet cream with various levels of WC. Three different cream cheese mixes were prepared: control mix (CC; 0% WC), cream cheese mixes containing 25% WC (25WC; i.e., 75% sweet cream), and cream cheese mixes with 75% WC (75WC; i.e., 25% sweet cream). The CC, 25WC, and 75WC mixes were then used to manufacture cream cheeses. We also studied the effect of WC on the initial step in cream cheese manufacture (i.e., the acid gelation process monitored using dynamic small amplitude rheology). Acid gels were also prepared with added denatured whey proteins or membrane proteins/phospholipids (PL) to evaluate how these components affected gel properties. The rheological, textural, and sensory properties of cream cheeses were also measured. The WC samples had significantly higher levels of PL and insoluble protein compared with sweet cream. An increase in the level of WC reduced the rate of acid gel development, similar to the effect of whey phospholipid concentrate added to mixes. In cream cheese, an increase in the level of added WC resulted in significantly lower storage modulus values at temperatures <20°C. Texture results, obtained from instrumental and sensory analyses, showed that high level of WC resulted in significantly lower firmness or hardness values and higher stickiness compared with cream cheeses made with 25WC or CC cream cheeses. The softer, less elastic gels or cheeses resulting from the use of high levels of WC are likely due to the presence of components such as PL and proteins from the native milk fat globule membrane. The use of low levels of WC in cream cheese did not alter the texture, whereas high levels of WC could be used if manufacturers want to produce more spreadable products.     

含大豆分离蛋白的干酪在成熟过程中化学组成和感官特性的变化

分析了不同大豆分离蛋白含量的干酪在成熟期化学组成（水分、蛋白质、脂肪、灰分）的变化，评价了其感官特性。结果表明，质量分数为5%大豆分离蛋白的干酪与纯牛乳干酪相比，其感官特性最佳。     

Prediction of sensory textural properties from rheological analysis for process cheeses varying in emulsifying salt,protein and moisture contents

Textural characteristics of process cheeses varying in emulsifying salt (disodium phosphate), protein and moisture contents were evaluated by rheological compression using texture profile analysis and by sensory evaluation. The primary objective of this study was to predict sensory textural parameters using instrumental rheological parameters. All sensory parameters correlated with one or more instrumental parameters, e.g. rheological firmness versus sensory firmness (R = 0.98, P < 0.001), rheological chewiness versus sensory rubbery (R = 0.92, P < 0.001) and rheological chewiness versus sensory chewy (R = 0.86, P < 0.001). Partial least squares calibration models were developed for each of nine sensory parameters using instrumental parameters. Principal component analysis of instrumental and sensory parameters illustrated relationships among parameters. It was shown that instrumental parameters could be used to supplement sensory evaluation of process cheese texture. Increasing emulsifying salt content increased firmness, springiness and chewiness and decreased adhesiveness, mouthcoating and mass formation. Increasing protein content resulted in increased fracture strain and stress and chewiness and decreased melting. Increasing moisture content increased cohesiveness and decreased firmness and chewiness. Copyright © 2007 Society of Chemical Industry     

脂肪替代物对Mozzarella干酪流变学特性影响研究

目的研究脂肪替代物对部分脱脂Mozzarella干酪的流变学特性及微观结构的影响。方法通过测定不同脂肪替代物(菊粉、麦芽糖醇、WPC-80、大豆卵磷脂)制成的部分脱脂干酪的基本组分、流变学特性、粘弹性模量变化、微观结构,研究不同脂肪替代物对干酪的影响。结果菊粉、WPC-80、大豆卵磷脂均能提高部分脱脂干酪的水分含量,加入脂肪替代物的干酪的pH明显低于对照组部分脱脂干酪的pH。WPC-80 G菊粉G大豆卵磷脂G麦芽糖醇G对照G,说明加入脂肪替代物能显著改善部分脱脂干酪的黏弹流变学特性。结论麦芽糖醇作为脂肪替代物替代脂肪的效果较好,能提高蛋白分子间疏水作用,加入麦芽糖醇的部分脱脂干酪的黏弹性与对照组最为接近。     

Effect of manufacturing factors,composition, and proteolysis on the functional characteristics of mozzarella cheese

Shredding and melting characteristics are vital to the function of low‐moisture Mozzarella cheeses that are used as ingredients for pizza and related foods. Newly manufactured Mozzarella melts to a tough, extremely elastic, and somewhat granular consistency with limited stretch that is unacceptable for pizza. However, during the first few weeks of refrigerated storage, a dramatic transformation occurs as the unmelted cheese becomes softer and the melted cheese becomes more viscous, less elastic, and highly stretchable. Thus, the cheese attains optimal functionality for pizza. Over longer periods, Mozzarella becomes excessively soft and fluid when melted and is no longer acceptable for pizza. Low‐moisture Mozzarella is correctly viewed as a cheese that requires aging.

The functional characteristics of low‐moisture Mozzarella are due initially to the chemical composition, including fat, moisture, NaCl, and mineral contents, and the structure of the paracasein curd matrix that is established during manufacture. Changes in functional characteristics during aging are directly related to proteolysis rate and possibly proteolytic specificity. Proteolysis during aging is influenced by manufacturing factors such as starter culture, coagulant, and stretching temperature, and possibly to indigenous proteases in the cheesemilk such as plasmin.     

Effect of iron fortification on microstructural,textural, and sensory characteristics of caprine milk Cheddar cheeses under different storage treatments

In this study, we manufactured 3 types of caprine milk Cheddar cheese: a control cheese (unfortified) and 2 iron-fortified cheeses, one of which used regular ferrous sulfate (RFS) and the other used large microencapsulated ferrous sulfate (LMFS). We then compared the iron recovery rates and the microstructural, textural, and sensory properties of the 3 cheeses under different storage conditions (temperature and duration). Compositional analysis included fat, protein, ash, and moisture contents. The RFS (FeSO₄·7H₂O) and LMFS (with 700- to 800-μm large particle ferrous sulfate encapsulated in nonhydrogenated vegetable fat) were added to cheese curds after whey draining and were thoroughly mixed before hooping and pressing the cheese. Three batches of each type of goat cheese were stored at 2 temperatures (4°C and ?18°C) for 0, 2, and 4 mo. We analyzed the microstructure of cheese using scanning electron microscopy and image analysis software. A sensory panel (n = 8) evaluated flavors and overall acceptability of cheeses using a 10-point intensity score. Results showed that the control, RFS, and LMFS cheeses contained 0.0162, 0.822, and 0.932 mg of Fe/g of cheese, respectively, with substantially higher iron levels in both fortified cheeses. The iron recovery rates of RFS and LMFS were 71.9 and 73.5%, respectively. Protein, fat, and ash contents (%) of RFS and LMFS cheeses were higher than those of the control. Scanning electron microscopy analyses revealed that LMFS cheese contained smaller and more elongated sharp-edged iron particles, whereas RFS cheese had larger-perimeter rectangular iron crystals. Iron-fortified cheeses generally had higher hardness and gumminess scores than the control cheese. The higher hardness in iron-fortified cheeses compared with the control may be attributed to proteolysis of the protein matrix and its binding with iron crystals during storage. Control cheese had higher sensory scores than the 2 iron-fortified cheeses, and LMFS cheese had the lowest scores for all tested sensory properties.     

Effect of grinding on the structure of pea protein isolate and the rheological properties of its acid-induced gels

The purpose of this study was to expand the application range of pea protein isolates by improving the rheological properties of their acid-induced gels. A pea protein isolate was ground for different durations, and changes in the structure and properties of its gels were studied. Furthermore, the influence mechanism of grinding on gelation was revealed. The results showed that grinding slightly changed the secondary structure of the pea protein isolate and had a great impact on its tertiary structure. Compared with the unground pea protein isolate, the solubility of the ground pea protein isolate increased from 45.89% to 69.84%, and the water-holding capacity of the gels increased from 52.04% to 94.67% at 7.5 min of grinding. After grinding for 15 min, the particle size of the pea protein isolate decreased from 1292.4 to 945.7 nm, and the polydispersity index decreased from 0.387 to 0.321. Rheological measurements showed that the storage modulus (G′), viscosity and recovery of protein gel samples improved after grinding. Thus, grinding enhanced the potential of protein gels for new applications.     

转谷氨酰胺酶交联乳蛋白对新鲜干酪特性的影响

利用转谷氨酰胺酶(TG)交联酪蛋白,研究其对新鲜干酪凝乳的成分和质构特征的影响。结果表明,TG能够加速凝乳发酵过程,提高乳中蛋白质和脂肪的回收率,并显著降低了乳清中的蛋白含量,对凝乳的质构特征也具有明显修饰作用。但与凝乳酶同时作用时,TG酶对凝乳的修饰作用不显著。     

Effect of frozen storage on the proteolytic and rheological properties of soft caprine milk cheese

Freezing and long-term frozen storage had minimal impact on the rheology and proteolysis of soft cheese made from caprine milk. Plain soft cheeses were obtained from a grade A goat dairy in Georgia and received 4 storage treatments: fresh refrigerated control (C), aged at 4°C for 28 d; frozen control (FC), stored at −20°C for 2 d before being thawed and aged in the same way as C cheese; and 3-mo frozen (3MF), or 6-mo frozen (6MF), stored at −20°C for 3 or 6 mo before being thawed and aged. Soft cheeses had fragile textures that showed minimal change after freezing or over 28 d of aging at 4°C. The only exceptions were the FC cheeses, which, after frozen storage and aging for 1 d at 4°C, were significantly softer than the other cheeses, and less chewy than the other frozen cheeses. Moreover, after 28 d of aging at 4°C, the FC cheeses tended to have the lowest viscoelastic values. Slight variation was noted in protein distribution among the storage treatment, although no significant proteolysis occurred during refrigerated aging. The creation and removal of ice crystals in the cheese matrix and the limited proteolysis of the caseins showed only slight impact on cheese texture, suggesting that frozen storage of soft cheeses may be possible for year-round supply with minimal loss of textural quality.     

Utilization of two plant polysaccharides to improve fresh goat milk cheese: Texture,rheological properties,and microstructure characterization

This study aimed to evaluate the effects of added jujube polysaccharide (JP) and Lycium barbarum polysaccharide (LBP) on the texture, rheological properties, and microstructure of goat milk cheese. Seven groups of fresh goat milk cheese were produced with 4 levels (0, 0.2, 0.6, and 1%, wt/wt) of JP and LBP. The goat milk cheese containing 1% JP showed the highest water-holding capacity, hardness, and the strongest rheological properties by creating a denser and more stable casein network structure. In addition, the yield of goat milk cheese was substantially improved as a result of JP incorporation. Cheeses containing LBP expressed lower fat content, higher moisture, and softer texture compared with the control cheese. Fourier-transform infrared spectroscopy and low-field nuclear magnetic resonance analysis demonstrated that the addition of JP improved the stability of the secondary protein structure in cheese and significantly enhanced the binding capacity of the casein matrix to water molecules due to strengthened intermolecular interactions. The current research demonstrated the potential feasibility of modifying the texture of goat milk cheese by JP or LBP, available for developing tunable goat milk cheese to satisfy consumer preferences and production needs.     

Effect of different starches on rheological and microstructural properties of (I) model processed cheese

A range of processed cheese spread samples containing starch were prepared on a Rapid Visco Analyser (RVA). The starches used were waxy cornstarch, high‐amylose cornstarch, rice starch, potato starch, wheat starch and acid‐converted starch. Incorporation of the starches at different levels produced marked differences in the rheological, microstructural and functional properties of the processed cheese spreads. Rheological attributes such as complex modulus and viscosity increased; the extent of increase depended on the starch type and the starch level. Starch incorporation at reduced protein levels demonstrated the possibility of maintaining satisfactory rheological properties at lower ingredient cost.     

Effect of different starches on rheological and microstructural properties of (II) commercial processed cheese

A range of commercial processed cheese samples containing starch were prepared on a Rapid Visco Analyser (RVA) and on a pilot plant scale. This work clearly demonstrated that it was possible to manufacture processed cheese with part of the protein replaced with potato starch, while maintaining similar rheological attributes (firmness) to those of the control and an acceptable melt index. Sensory evaluation showed that, although the reduced‐protein cheese samples had a good, clean, fresh flavour that was comparable with that of the control, at high starch concentrations the starch‐containing processed cheese had a pasty texture and tended to stick to the wrapper.     

Effect of soy protein supplementation on the quality of ripening Cheddar-type cheese

The impact of soy protein isolate on the proteolysis and organoleptic properties of Cheddar-type cheese during ripening was studied. Cheese was prepared from cow's milk (control) and cow's milk plus soy protein isolate by using a starter culture of Streptococcus thermophilus and Lactobacillus delbrueckii subsp . bulgaricus, and then ripened at 12  ±  1°C for 3 and 5 months. The molecular weight range and peptide fraction in the cheeses were determined by high-performance liquid chromatography (HPLC), and the microstructure was observed by scanning electron microscopy (SEM). Sensory evaluation was used to compare the flavour, body, texture and appearance of the cheeses. The results show that the molecular weight range (9924–9966  Da) in the control cheese was larger than that (6954–6957   Da) in the soy protein-treated cheese and the microstructure in the latter was less compact than in the control cheese. In the sensory evaluation, higher scores were given for some experimental cheese than the control cheese. After 5 months of ripening, the organoleptic properties of the cheese had markedly improved and no bitter off-flavour was detected in the treated cheeses. It was concluded that soy protein could be used to improve the quality of cheese and the addition of 5% soy protein isolate could be recommended for improving the flavour and texture of Cheddar-type soy supplemented cheese.     

Effects of l‐lysine/l‐arginine on the emulsion stability,textural, rheological and microstructural characteristics of chicken sausages

The effects of l ‐lysine (Lys), l ‐arginine (Arg) and soya protein isolated (SPI) on the physicochemical properties of chicken sausages were investigated. The results showed that the addition of Lys/Arg significantly decreased total expressible fluid and expressible fat, but significantly increased hardness, springiness, cohesiveness and chewiness of chicken sausage. Moreover, Lys and Arg were more effective than SPI. Rheology indicated that Lys/Arg increased final storage modulus and final loss modulus. Also, scanning electron microscope and confocal laser scanning microscopy disclosed that Lys or Arg was conducive to the formation of regular and uniform oil droplet surrounded integrate membrane. Overall, Lys/Arg exhibited a potential in the preparation of emulsion‐type meat products.     

Effect of different fibres on texture,rheological and sensory properties of acid casein processed cheese sauces

The objective of this study was the evaluation of different fibres (bamboo, acacia, potato or citrus) addition on texture, rheological and sensory properties of acid casein processed cheese sauces. Fibres used in production of sauces had an impact on the texture, viscosity, viscoelastic and sensory properties. The largest increase in viscosity was observed in products with addition of potato fibre, which have good water holding and adsorption capacity. Processed cheese sauce with the addition of citrus fibre was characterised by the highest values in general, and the increase of this feature in the tested samples was regular. Adhesiveness was the highest in products with 1% addition of every fibre. The lowest values of viscosity single shear, G′ and G″ moduli, among all tested, had sauces with acacia fibre. Moreover, they had the most thin liquid consistency, which was different from preferred one.     

Influence of emulsifying salts on the textural properties of nonfat process cheese made from direct acid cheese bases

The objective of this study was to investigate the influence of several types of emulsifying salts (ES) on the texture of nonfat process cheese (NFPC). Improperly produced nonfat cheese tends to exhibit several problems upon baking including stickiness, insufficient or excessive melt, pale color upon cooling, formation of a dry skin (skinning) often leading to dark blistering, and chewy texture. These attributes are due to the strength and number of interactions between and among casein molecules. We propose to disrupt these interactions by using suitable emulsifying salts (ES). These ES chelate Ca and disperse caseins. Stirred curd cheese bases were made from skim milk using direct acidification with lactic acid to pH values 5.0, 5.2, and 5.4, and ripened for 1 d. Various levels of trisodium citrate (TSC; 0.5, 1, 1.5, 2, 2.5, 3, and 5%), disodium phosphate (DSP; 1, 2, 3, and 4%), or trisodium phosphate (TSP; 1, 2, 3, and 4%) were blended with the nonfat cheese base. Cheese, ES, and water were weighed into a steel container, which was placed in a waterbath at 98°C and then stirred using an overhead stirrer for 9 min. Molten cheese was poured into plastic containers, sealed, and stored at 4°C for 7 d before analysis. Texture and melting properties were determined using texture profile analysis and the UW-Melt-profiler. The pH 5.2 and 5.4 cheese bases were sticky during manufacture and had a pale straw-like color, whereas the pH 5.0 curd was white. Total calcium contents were approximately 400, 185, and 139 mg/100 g for pH 5.4, 5.2, and 5.0 cheeses, respectively. Addition of DSP resulted in NFPC with the lowest extent of flow, and crystal formation was apparent at DSP levels above 2%. The NFPC manufactured from the pH 5.0 base and using TSP had reduced melt and increased stickiness, whereas melt was significantly increased and stickiness was reduced in NFPC made with pH 5.4 base and TSP. However, for NFPC made from the pH 5.4 cheese and with 1% TSP, the pH value was >6.20 and crystals were observed within a few days. Use of TSC increased extent of flow up to a maximum with the addition of 2% ES for all 3 types of cheese bases. Addition of high levels of TSC to the pH 5.2 and 5.4 cheese bases resulted in increased stickiness. Similar pH trends for attributes such as extent of flow, hardness, and adhesiveness were observed for both phosphate ES but no consistent pH trends were observed for the NFPC made with TSC. These initial trials suggest that the pH 5.0 cheese base was promising for further research and scale-up to pilot-scale process cheese making, because cheeses had a creamy color, reasonable melt, and did not have high adhesiveness when TSC was used as the ES. However, the acid whey produced from the pH 5.0 curd could be a concern.