Eu/Sm ions co-doped white light luminescence SrSiO3 glass-ceramics phosphor for White LED

Eu²⁺/Sm³⁺ co-doped silicate glass was prepared by high temperature melting under reducing atmosphere and the Eu²⁺/Sm³⁺ co-doped SrSiO₃ transparent glass-ceramics were obtained after heat-treatment. X-ray diffraction (XRD) and Raman spectra confirmed the formation of SrSiO₃ nano-crystals in the glass matrix. The photoluminescence excitation (PLE) spectra and photoluminescence (PL) spectra of the samples were measured. A broad emission band from 400 nm to 550 nm due to the 4f⁶5d¹ → 4f⁷ transitions of Eu²⁺ was observed, as well as several sharp emission peaks at 563 nm, 600 nm, 646 nm and 713 nm ascribed to the 4f → 4f transitions of Sm³⁺. The luminescence properties of the glass ceramics with different molar ratio of Eu²⁺/Sm³⁺ were studied and the corresponding chromaticity coordinates were calculated. The ultraviolet light-emitting diode (UV-LED) excitable glass-ceramics emitting white light were obtained by tuning the relative emission intensity of Eu²⁺ and Sm³⁺. The results indicate that the Eu²⁺/Sm³⁺ co-doped SrSiO₃ transparent glass-ceramics can be used as a potential matrix material for White LED under UV-LED excitation.     

Luminescent properties of Na3Gd1−xEux(PO4)2 and energy transfer in these phosphors

A series of Eu³⁺ activated Na₃Gd_1−xEu_x(PO₄)₂ (0 ≤ x ≤ 1) phosphors were synthesized by solid-state reaction method. The structures and photo-luminescent properties of these phosphors were investigated at room temperature. The results of XRD patterns indicate that these phosphors are isotypic to the orthorhombic Na₃Gd(PO₄)₂. The excitation spectra indicate that these phosphors can be effectively excited by near UV (370-410 nm) light. The intensities of magnetic dipole transition ⁵D₀ → ⁷F₁ and forced electric dipole transition ⁵D₀ → ⁷F₂ are comparable, and the energy ratio (⁵D₀ → ⁷F₁/⁵D₀ → ⁷F₂) is 1.1. The emission spectra exhibit strong reddish orange performance (CIE chromaticity coordinates: x = 0.62, y = 0.38), which is due to the ⁵D₀ → ⁷F_J transitions of Eu³⁺ ions. The correlation between the structure and the photo-luminescent properties of the phosphors was studied. The energy transfer and concentration quenching of the phosphors were discussed. Na₃Gd_1−xEu_x(PO₄)₂ has a potential application for white light-emitting diodes.     

Synthesis and luminescence properties of clew-like CaMoO4:Sm, Eu

Eu³⁺ and Sm³⁺ co-doped CaMoO₄ microclews have been successfully synthesized via a facile hydrothermal method directly in surfactant-free environment. The as-prepared phosphor present clew-like agglomerates composed of 40 nm nanosheets under the moderated reaction temperature. The red phosphor CaMoO₄:Eu³⁺, Sm³⁺ can generate a strong absorption line at 405 nm, originating from ⁶H_5/2 → ⁶P_5/2 transition of Sm³⁺, which is suitable for the emission of the near-ultraviolet light-emitting diodes (∼400 nm). Energy transfer between Sm³⁺ and Eu³⁺ is detected from the varied photoluminescence spectra with different Eu³⁺ concentrations and the energy transfer mechanism is clarified via the photoluminescence spectra. When Sm³⁺ is excited (405 nm), the electron is excited from ⁶H_5/2 to ⁶P_5/2, and then relaxed to ⁴G_5/2. It jumps from ⁴G_5/2 to the lower levels corresponding to the emissions of Sm³⁺; meanwhile, the transfers from ⁴G_5/2 state of Sm³⁺ ion to ⁵D₀ state of Eu³⁺ ion come out. The transition of ⁵D₁ → ⁷F_J (J = 0, 1, 2) does not appear indicating that the transfer from ⁴G_5/2 state of Sm³⁺ to ⁵D₀ state rather than ⁵D₁ state of Eu³⁺ is the energy transfer pathway.     

Photoluminescence and thermoluminescence studies of Mg2SiO4:Eu nano phosphor

Nanoparticles of Eu³⁺ doped Mg₂SiO₄ are prepared using low temperature solution combustion technique with metal nitrate as precursor and urea as fuel. The synthesized samples are calcined at 800 °C for 3 h. The Powder X-ray diffraction (PXRD) patterns of the sample reveled orthorhombic structure with α-phase. The crystallite size using Scherer's formula is found to be in the range 50-60 nm. The effect of Eu³⁺ on the luminescence characteristics of Mg₂SiO₄ is studied and the results are presented here. These phosphors exhibit bright red color upon excitation by 256 nm light and showed the characteristic emission of the Eu³⁺ ions. The electronic transition corresponding to ⁵D₀ → ⁷F₂ of Eu³⁺ ions (612 nm) is stronger than the magnetic dipole transition corresponding to ⁵D₀ → ⁷F₁ of Eu³⁺ ions (590 nm). Thermoluminescence (TL) characteristics of γ-rayed Mg₂SiO₄:Eu³⁺ phosphors are studied. Two prominent and well-resolved TL glows with peaks at 202 °C and 345 °C besides a shoulder with peak at ∼240 °C are observed. The trapping parameters-activation energy (E), order of kinetics (b) and frequency factor (s) are calculated using glow curve shape method and the results obtained are discussed.     

Citric based sol-gel synthesis and luminescence characteristics of CaLa2ZnO5:Euphosphors for blue LED excited white LEDs

A novel class of orange-red phosphors namely CaLa₂ZnO₅ (CLZ) doped with Eu³⁺ ions were prepared by adopting citrate based sol-gel method. Those were thoroughly characterized by means of XRD, SEM, Tg-DTA, photoluminescent (PL) spectral profiles. PL studies reveal that its emission intensity strongly depends on sintering temperature as well as the dopant ion (Eu³⁺) concentration. Eu³⁺ ion doped CaLa₂ZnO₅ phosphor has a strong excitation at 468 nm, which correspond to the popular emission line from a GaN based blue light-emitting diode (LED) chip. The influence of the preparation method on the luminescence property was studied by comparing the emission performance of phosphors prepared by sol-gel and solid-state reaction methods along with a commercial red phosphor Y₂O₂S:Eu³⁺. Thus, the intense red emission (⁵D₀ → ⁷F₂) of the Eu³⁺ doped CLZ phosphors under blue excitation suggests them to be a potential candidate for the production of white light by blue LEDs.     

Luminescence studies of Ba1−xMg2−y(PO4)2:xEu, yMn phosphor

The phosphors BaMg₂(PO₄)₂ doped with Eu²⁺ and Mn²⁺ solely or doubly were prepared by solid state reaction, and their luminescent properties were also investigated. Under the excitation of 322 nm, it has been observed a broad blue emission band centered at 417 nm and a red emission band centered at about 665 nm, resulting from Eu²⁺ and Mn²⁺, respectively. Resonance-type energy transfers from Eu²⁺ to Mn²⁺ were discovered by directly overlapping the emission spectra of Eu²⁺ and the excitation spectra of Mn²⁺. According to the changes of relative intensities of Eu²⁺ and Mn²⁺ emission, efficiencies of energy transfer were calculated. Based on the principle of energy transfer, the relative intensities of blue and red emission could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺.     

Multiwavelength excited novel red-emitting phosphor Eu-activated Li2Zn2(MoO4)3

Eu³⁺-activated Li₂Zn₂(MoO₄)₃ multiwavelength excited red-emitting phosphors were synthesized via a solid state reaction. The structure and photoluminescence characteristics were investigated by X-ray powder diffraction and fluorescent spectrophotometry, respectively. The excitation spectrum included a strong broadband ranging from 250 to 350 nm and some sharp peaks at 363, 384, 395, 465, and 533 nm, which matchs the radiations of near-UV or blue light-emitting diodes chip well. Upon excitation either of near-UV or blue even green light, the intense red emission with 615 nm peak can be observed, which is ascribed to the ⁵D₀-⁷F₂ transition of Eu³⁺ ions. The chromaticity coordinates (x = 0.65, y = 0.34) of the as-obtained phosphor is very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that Eu³⁺-doped Li₂Zn₂(MoO₄)₃ wavelength-conversion material to be suitable candidate red component for phosphor-converted white light-emitting diodes.     

Preparation and luminescent properties of Eu doped Sr3La(PO4)3 phosphor

Eu²⁺-doped Sr₃La(PO₄)₃ phosphors were synthesized by solid-state reaction method. Their luminescent properties were investigated. The phosphor could be excited by ultraviolet light effectively. The emission spectra exhibit two emission peaks located at 418 nm and 500 nm, respectively. These two peaks originated from two different luminescent centers, respectively. One is nine-coordinated Eu(I) center, other is six-coordinated Eu(II) center. It was found that the doping concentration of Eu²⁺ ions affected the shape of emission spectra. As the doping concentration increasing, Eu²⁺ ions are more likely to form Eu(I) luminescent centers and emit purple light.     

Preparation and luminescent characteristics of Sr3RE2(BO3)4:Dy (RE = Y, La, Gd) phosphors for white LED

Dysprosium-activated Sr₃RE₂(BO₃)₄ (RE = Y, La, Gd) phosphors were synthesized by a high temperature solid-state reaction method. The phase uniformity of the phosphors was characterized by X-ray powder diffraction (XRD) and the luminescence characteristics were investigated. The excitation spectra at 575 nm emission show strong spectral bands in the region of 300-500 nm. The emission spectra of the phosphors with 365 nm excitation show three bands centered at 484 nm, 575 nm and 680 nm, which originate from the transitions of ⁴F_9/2 → ⁶H_15/2, ⁴F_9/2 → ⁶H_13/2 and ⁴F_9/2 → ⁶H_11/2 of Dy³⁺, respectively. The effect of Dy³⁺ concentration on the emission intensity of the phosphors was investigated. The fluorescence decay curves for ⁴F_9/2 → ⁶H_13/2 excited at 365 nm and monitored at λ_em of 575 nm were measured. The decay times decreased slowly with increasing Dy³⁺ doping concentration due to a trap capturing to resonance fluorescence transfer of the activated ions and due to the exchange interactions between activated ion pairs. In order to determine the type of interaction between activated ions, the concentration dependence curves (lg(I/x) versus lg x) of Sr₃RE₂(BO₃)₄:Dy³⁺ (RE = Y, La, Gd) were plotted. The concentration quenching mechanism of the ⁴F_9/2 → ⁶H_13/2 (575 nm) transition of Dy³⁺ is the d-d interaction. All results indicate these phosphors are promising white-color luminescent materials.     

Vacuum ultraviolet spectroscopic properties of KSrPO4:Tb

KSrPO₄:Tb³⁺ phosphors were prepared by a solid-state method and their photoluminescence properties were investigated under vacuum ultraviolet excitation. In the excitation spectrum monitoring at 544 nm, the band in the region of 120-162 nm can be attributed to be the overlap of host absorption and charge transfer transition of O²⁻ → Tb³⁺, and the band ranging from 162 to 300 nm was assigned to the f-d transition of Tb³⁺. The photoluminescence spectrum shows that the phosphors exhibited a strong green emission around 544 nm corresponding to the ⁵D₄ → ⁷F₅ transition of Tb³⁺ under the excitation of 147 nm. Optimal emission intensity was obtained when x = 7% in KSr_1-xPO₄:xTb³⁺ and the luminescent chromaticity coordinates were calculated to be (x = 0.317, y = 0.522) for KSr_0.93PO₄:7%Tb³⁺.     

Synthesis and photoluminescence properties of color-tunable BaLa2WO7:Eu phosphor

Color-tunable phosphors BaLa_2−xEu_xWO₇ were synthesized via a solid-state reaction. The absorption, excitation, emission and decay curves were obtained to study the luminescence properties. The experimental results indicate that BaLa_2−xEu_xWO₇ phosphors have two regions in the excitation spectra: one is assigned to the charge-transfer state (CTS) band at about 338 nm, and the other is assigned to the intra-4f transitions at 360-600 nm. The emission spectra of BaLa_2−xEu_xWO₇ phosphors excited at 395 nm exhibit a series of sharp peaks, which are attributed to the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions. Luminescence from higher excited states, such as ⁵D₁, ⁵D₂, and ⁵D₃, were also observed at low Eu³⁺ concentration. The optimal emission intensity of ⁵D₀ → ⁷F₂ red emission is at x = 0.4 (BaLa_1.6Eu_0.4WO₇). The chromaticity coordinates of BaLa_2−xEu_xWO₇ phosphors vary with Eu³⁺ content from white, orange-red, to red, making it a candidate for a white-light-emitting phosphor in UV-LEDs.     

Photoluminescent properties of LiSrxBa1−xPO4:RE (RE = Sm, Eu) f-f transition phosphors

Rare-earth ions (Sm³⁺ or Eu³⁺) doped LiSr_xBa_1−xPO₄ (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) f-f transition phosphor powders were prepared by a high temperature solid-state reaction. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the phase structure of the sample changes from LiBaPO₄ to LiSrPO₄ when x changes from 0 to 1.0. The excitation spectra indicate that only direct excitation of rare earth ions (Sm³⁺ or Eu³⁺) can be observed. The doped rare earth ions show their characteristic emission in LiSr_xBa_1−xPO₄, i.e., Eu³⁺⁵D₀-⁷F_J (J = 0, 1, 2, 3, 4), Sm³⁺⁴G_5/2 → ⁶H_J (J = 5/2, 7/2, 9/2, 11/2), respectively. The dependence of the emission intensities of the LiSr_xBa_1−xPO₄:Sm³⁺ and LiSr_xBa_1−xPO₄:Eu³⁺ phosphors on the x value and Ln³⁺ (Ln³⁺ = Sm³⁺, Eu³⁺) concentration is also investigated.     

Preparation and structural properties of Lu2O3:Eu submicrometer spherical phosphors

Monodisperse non-agglomerated Lu₂O₃:Eu³⁺ submicrometer spheres were obtained by the homogeneous precipitation technique with subsequent annealing for spheres crystallization. The morphological and structural parameters of the Lu₂O₃:Eu³⁺ crystalline spheres prepared were investigated by the electron microscopy methods, thermal analysis (TG-DTA), X-ray diffractometry (XRD), X-ray photoelectron (XPS) and FT-IR spectroscopy. The influence of the annealing temperature on the morphology and sphericity was shown. Eu³⁺-doped lutetium oxide spheres were characterized by effective luminescence under X-ray excitation in the λ = 575-725 nm range corresponding to ⁵D₀ → ⁷F_J transitions (J = 0-4) of Eu³⁺ ions. It was shown that the X-ray luminescence efficiency of the Lu₂O₃:Eu³⁺ spherical phosphors prepared strongly depend on annealing temperature and dopant concentration.     

Influence of niobium doping on phase composition and defect-mediated photoluminescence properties of Eu-doped TiO2 nanopowders synthesized in Ar/O2 thermal plasma

Nb⁵⁺:Eu³⁺-codoped TiO₂ nanopowders for chemical composition adjustment have been synthesized via Ar/O₂ radio-frequency thermal plasma. X-ray diffraction (XRD) results reveal that all the resultant powders exhibited mixture polymorphs of anatase (mean size: ∼45 nm) as the major phase and rutile (mean size: ∼71 nm). Rutile formation was promoted by the Eu³⁺ doping but suppressed by the Nb⁵⁺ addition. Combined observation using FE-SEM and TEM indicates that all the plasma-synthesized powders had a majority of facet-shaped particles (several nanometers) and a small proportion of nearly spherical crystals (∼150 nm). For the defect-mediated photoluminescence (PL) emission through the energy transfer from the TiO₂ host to the Eu³⁺ activator, the PL intensity originating from the ⁵D₀ → ⁷F₂ electronic transition weakened but that from the ⁵D₀ → ⁷F₁ electronic transition strengthened with increasing Nb⁵⁺ content. This may be a result of the decrease in the oxygen vacancy defects in the TiO₂ host lattice, as revealed by the joint means of UV-vis absorption spectra and excitation and emission spectra.     

Preparation and luminescence characterization of new carbonate (Y2(CO3)3·nH2O:Eu) phosphors via the hydrothermal route

A new Eu³⁺-activated Y₂(CO₃)₃·nH₂O phosphor was successfully prepared via the hydrothermal process using urea as a reaction agent. Y₂(CO₃)₃·nH₂O:Eu³⁺ phosphors displayed an intense red emission at 615 nm due to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions under 254 nm excitation. The intensity of this emission was significantly increased with a rise in the hydrothermal temperatures. The study of photoluminescence properties demonstrated that Y³⁺ ions were replaced by Eu³⁺ ions in the host lattice at the 9-coordination sites. With an increase in heating temperatures, the morphology of Y₂(CO₃)₃·nH₂O:Eu³⁺ powders changed from a spherical to a rod-like shape. Calcination at elevated temperatures resulted in thermal decomposition of Y₂(CO₃)₃·nH₂O:Eu³⁺ to form Y₂O₃:Eu³⁺. The formed Y₂O₃:Eu³⁺ powder exhibited a rod-like morphology with an intense red emission.     

Preparation and its luminescent properties of AlPO4:Eu phosphor for w-LED applications

Orange-reddish-emitting phosphor AlPO₄:Eu³⁺ were fabricated by solid-state reactions at high temperature. X-ray diffraction analysis revealed that AlPO₄ doped with 3 mol% of Eu³⁺ (AlPO₄:0.03Eu³⁺) was pure orthorhombic phase. The photoluminescence study shows that the intensity of magnetic dipole transition (⁵D₀ → ⁷F₁) at 594 nm dominates over that of electric dipole transition (⁵D₀ → ⁷F₂) at 613 nm. The optimum concentration of Eu³⁺ for the highest luminescence is found to be 3 mol%. The PL excitation spectrum is composed of CTB of Eu-O and excitation lines of Eu³⁺ ions. The strongest excitation lines appeared at 392 nm. The color coordinates, quantum yield and lifetime for AlPO₄:0.03Eu³⁺ were measured. All the spectrum features indicate that AlPO₄:Eu³⁺ might be a promising phosphor for display devices or w-LEDs.     

Synthesis and photoluminescence of Eu by co-doping Eu and Cl in Sr2P2O7 under air atmosphere

A novel phosphor Sr₂P₂O₇ co-doped with europium ion and chlorine ion was firstly synthesized by solid state reaction under air atmosphere. Its properties were systematically analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and fluorescence spectra. The introduction of chlorine into the system was helpful and necessary to Eu³⁺ substitute Sr²⁺ site and subsequently to reduce Eu³⁺ to Eu²⁺, XPS results confirmed that some amount of Eu³⁺ ions could be reduced to Eu²⁺ ions under air atmosphere at high temperature. The reduction tendency of Eu³⁺ depends not only on the doping Cl⁻ content, but also on the sintering temperature and time. Photoluminescence spectra also revealed that europium ions were present in divalent as well as trivalent oxidation states, the emission peak at 415 nm is ascribed to the typical 5d-4f transition of Eu²⁺, 592 nm and 613 nm assigned to the characteristic transitions of ⁵D₀-⁷F_1,2 of Eu³⁺. Such abnormal reduction was attributed to the electronegative defects formed by nonequivalent substitution of Eu³⁺ on the Sr²⁺ sites in the investigated phosphors.     

Preparation of Dy-activated strontium orthosilicate (Sr2SiO4:Dy) phosphors and its photoluminescent properties

Dy³⁺-activated β/α′-Sr₂SiO₄ phosphors were successfully prepared by solid-state reaction method with ammonium chloride (NH₄Cl) as the flux. The influences of calcination temperatures, amounts of NH₄Cl and the concentrations of Dy³⁺ on phase composition, morphology and the photoluminescent properties of as-prepared powders were investigated in detail. The β and α′ phases of Sr₂SiO₄ were obtained with 1 wt% and 2-5 wt% NH₄Cl, respectively, as the sintered condition was at 1000 °C for 4 h. With increasing the amount of NH₄Cl, the morphology of phosphors changed from needlelike to regular polyhedron shape and the colors of the Sr₂SiO₄:Dy³⁺ phosphors changed from blue-green to white. The luminescence intensity of ⁴F_9/2 → ⁶H_15/2 transition was slightly higher than that of ⁴F_9/2 → ⁶H_13/2 (ΔL = 2, ΔJ = 2) transition owing to the low-symmetry around Dy³⁺ ions. The optimum concentration of Dy³⁺ was 2.0 mol% and the concentration quenching were caused by the d-d interaction and a cross relaxation. The yellow-to-blue intensity ratio (Y/B) of Dy³⁺ emission did not to change with varying the Dy³⁺ concentration using Li⁺ ions for charge compensation. These indicate that this phosphor can be used as a potential candidate for the phosphor-converted white LEDs with a UV chip.     

Reddish orange long afterglow phosphor Ca2SnO4:Smprepared by sol-gel method

A reddish orange light emissive long afterglow phosphor, Ca₂SnO₄:Sm³⁺ was prepared by sol-gel method at lower temperature. The synthesized phosphors were characterized by X-ray diffraction, scanning electron micrograph images, photoluminescence spectra, afterglow decay curves and thermoluminescence spectra. Three emission peaks locate at 565 nm, 609 nm and 655 nm corresponding to CIE chromaticity coordinates of x = 0.53 and y = 0.47, which indicates the reddish orange light emitting. The fluorescent intensity and the afterglow characteristic depends on the concentration of Sm³⁺ and the optimized concentration is 1.5 mol%. The afterglow decay curves are well fitted with triple-exponential decay models. The thermoluminescence glow curves show that the Sm³⁺ induces suitable trap depth and result in the long afterglow phenomenon, and the corresponding increase or decrease in afterglow is associated with trap concentration, nearly no change in trap depth. The 1.5 mol% Sm³⁺-doped Ca₂SnO₄ sample has the biggest trap concentration and exhibit the best afterglow characteristic, its’ afterglow time is about 1 h. The phosphorescence mechanism of this long afterglow phosphor was discussed.     

Preparation of Sr2Si5N8:Eu for white light-emitting diodes by multi-step heat treatment

In order to enhance luminescence properties of Eu²⁺-doped ternary nitride phosphor for white light-emitting diodes (LEDs), Sr₂Si₅N₈:Eu²⁺ phosphors with different Eu²⁺ concentrations were synthesized using a multi-step heat treatment. Impurities and luminescence properties of prepared Sr₂Si₅N₈:Eu²⁺ phosphors were investigated using X-ray diffraction (XRD) and photoluminescence spectroscopy. Excitation spectra of Sr₂Si₅N₈:Eu²⁺ phosphor showed broad excitation bands by both UV and blue light. Emission peak positions in spectra were red-shifted from 613 to 671 nm as Eu²⁺ ion concentrations increased. Phosphors following a multi-step heat treatment showed excellent luminescence properties. These included high emission intensity and very low thermal quenching compared to measurements using a commercially available YAG:Ce³⁺ phosphor.