CO2加氢合成甲酸适宜工艺条件的研究

采用浸渍-化学还原法制备负载型Cu基催化剂,在微型反应装置上进行了活性评价,考察了反应温度、压力、氢碳摩尔比、空速等工艺条件对催化反应的影响。结果表明,温度和压力对催化剂活性影响显著,升高温度,增加压力有利于提高CO2转化率、甲酸收率,适宜的氢碳摩尔比为4左右,空速范围5 000～11 000 h-1。     

CO_2加氢合成甲酸适宜工艺条件的研究

采用浸渍-化学还原法制备负载型Cu基催化剂,在微型反应装置上进行了活性评价,考察了反应温度、压力、氢碳摩尔比、空速等工艺条件对催化反应的影响。结果表明,温度和压力对催化剂活性影响显著,升高温度,增加压力有利于提高CO2转化率、甲酸收率,适宜的氢碳摩尔比为4左右,空速范围5 000～11 000 h-1。     

浆态床中CO2加氢直接合成二甲醚的双功能催化剂

采用共沉淀沉积法制备了CuO-ZnO-Al2O3-ZrO2/HZSM-5双功能催化剂,利用XRD、BET、H2-TPR、NH3-TPD等手段进行表征。在连续流动加压浆态床反应器中,以医用石蜡为惰性液相介质,研究了其对CO2加氢直接合成二甲醚的催化反应,考察了不同温度、不同压力、不同氢碳比和不同空速对反应结果的影响。研究表明,提高反应温度有利于提高CO2转化率,但使二甲醚的选择性降低;增大压力和氢碳比有利于提高CO2转化率和二甲醚的选择性;增大空速会使CO2转化率和二甲醚选择性均呈现下降趋势。     

合成气一步法制二甲醚工艺条件研究

研究了三相床反应器中合成气一步法制二甲醚的工艺条件,催化剂是由甲醇合成催化剂与甲醇脱水催化剂均匀混合组成的双功能催化剂.在温度220～265℃、压力4～5MPa、空速1～2 L/(g·h)的条件下,分别考察了温度、压力和空速对二甲醚合成反应中CO转化率及二甲醚选择性的影响.结果表明,在上述各因素相应的范围内,,随着反应温度的升高,CO转化率、DME选择性逐渐增加;随着压力的升高,CO转化率、DME选择性逐渐增加;CO转化率、DME选择性随空速的提高而逐渐减小.与固定床实验结果相比,三相床反应器中CO转化率略低于固定床反应器.     

还原工艺对费托合成铁基催化剂反应性能的影响

为获得还原参数对铁基费托合成反应性能的影响规律,利用铁基催化剂,在固定床反应器中考察还原氢碳比、温度、空速和压力对催化剂物理性能以及费托合成反应性能的影响。结果表明,在不同的还原工艺下,还原后的铁基催化剂比表面积下降,平均孔径增大;还原氢碳比和还原压力的升高抑制了催化剂的活性,CH_4和CO_2的选择性及C_2~C_4含量升高,C_(5+)含量下降,烃分布向轻质烃分布;还原温度和还原空速的增加有利于提高催化剂活性,还原温度的提高促使烃分布向轻质烃分布,还原空速的提高对产品分布影响不大。     

浆态床中二氧化碳加氢合成甲醇

研究了浆态床中自行开发的LP201甲醇合成催化剂上二氧化碳加氢合成甲醇的过程。探讨了不同操作条件,如温度、压力、气体空速、原料气配比等对反应的影响;考察了该催化剂在浆态床二氧化碳加氢合成甲醇过程中的稳定性。实验结果表明,浆态床二氧化碳加氢合成甲醇过程中主要产物为甲醇、CO和水;随温度的增加,CO2的转化率和甲醇产率呈现上升的趋势,但甲醇的选择性明显下降;压力的升高有利于CO2的转化率、甲醇产率以及甲醇的选择性提高;原料气空速的提高会增大甲醇产率,但同时降低CO2的转化率以及甲醇的选择性;CO2的转化率、甲醇收率以及甲醇的选择性在氢碳摩尔比4～5获得极大值。LP201催化剂的寿命考察结果表明,该催化剂具有较好的催化活性和稳定性。     

浆态床合成气制二甲醚反应器数学模拟

建立了包括液相返混和催化剂颗粒沉降的合成气一步法制二甲醚浆态床反应器的数学模型,模拟计算了空速、原料气组成、反应温度、反应压力等反应条件对反应的影响。计算结果表明,CO转化率和二甲醚的选择性随温度增加、压力增大而提高,在一定温度、压力条件下,CO转化率随空速增大而减小,合成气含有一定量的CO2有利于CO转化率增加。     

费托合成铁基催化剂浆态床反应性能的研究

为了获得工艺参数对铁基催化剂费托合成产品分布的影响规律,在浆态床反应器中考察了反应温度、反应压力、氢碳比、空速对铁基催化剂费托合成反应性能的影响。结果表明,温度升高时,催化剂活性、CO_2和CH_4选择性均升高,产物向轻组分分布;压力增大时,催化剂活性和CO_2选择性升高,CH_4选择性下降,产物向重组分分布;随氢碳比的增加,催化剂活性和CH_4选择性升高,CO_2选择性下降,C_(5+)呈下降趋势;随空速增加,催化剂的活性和CO_2选择性下降,CH_4选择性上升,C_(5+)向轻质烃分布。选择合适的工艺条件,可有效改善铁基催化剂的费托合成反应性能,控制碳链长度和产物的分布,提高费托合成反应的经济性。     

浆态床中合成二甲醚的研究

考察了浆态床中3种甲醇合成催化剂反应行为,考察了温度、压力、催化剂比例和种类对二甲醚合成的影响.结果表明,低压下甲醇合成催化剂中C30l活性最好,温度降低和压力升高有利于甲醇的合成.二甲醚合成中,不同脱水催化剂反应性能不同.在考察范围内,温度升高,CO转化率变化不大,二甲醚的选择性增加;压力升高,CO转化率和二甲醚选择性都随之升高;两种催化剂(C301Hβ)的质量比为41时,CO转化率和二甲醚选择性最高.     

裂解碳五双烯烃选择加氢

通过对裂解碳五（C₅）馏分中双烯烃选择加氢催化剂的研制及其加氢工艺条件试验,考察了反应压力、空速、氢/双烯摩尔比和入口温度等主要工艺条件对催化性能的影响,得出裂解C₅双烯烃选择加氢的适宜工艺条件为：入口温度30～40 ℃、反应压力2.0～3.0 MPa、氢/双烯摩尔比1.5～2.5、体积时空速为2～4 h^-1。在上述条件下研制的催化剂可以使双烯烃转化率大于95％,生成单烯烃的选择性大于90％。稳定性试验结果表明研制的催化剂具有良好的稳定性。通过再生,催化剂可恢复原有的催化性能。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。