High performance layered SmBa0.5Sr0.5Co2O5+δ cathode for intermediate-temperature solid oxide fuel cells

The layered SmBa_0.5Sr_0.5Co₂O_5+δ (SBSC) perovskite oxide is synthesized by the Pechini method and investigated as a novel cathode material for intermediate-temperature solid oxide fuel cells (IT-SOFCs). A laboratory-sized Sm_0.2Ce_0.8O_1.9 (SDC)-based tri-layer cell of NiO–SDC/SDC/SBSC is operated from 500 to 700 °C fed with humidified H₂ (3% H₂O) as a fuel and the static ambient air as oxidant. A maximum power density of 1147 mW cm⁻² is achieved at 700 °C. The interfacial polarization resistance is as low as 1.01, 0.38, 0.16, 0.06 and 0.03 Ω cm² at 500, 550, 600, 650 and 700 °C, respectively. The experimental results indicate that SBSC is a very promising cathode material for IT-SOFCs.     

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

A stable, easily sintered perovskite oxide BaCe_0.5Zr_0.3Y_0.16Zn_0.04O_3−δ (BCZYZn) as an electrolyte for protonic ceramic membrane fuel cells (PCMFCs) with Ba_0.5Sr_0.5Zn_0.2Fe_0.8O_3−δ (BSZF) perovskite cathode was investigated. The BCZYZn perovskite electrolyte synthesized by a modified Pechini method exhibited higher sinterability and reached 97.4% relative density at 1200 °C for 5 h in air, which is about 200 °C lower than that without Zn dopant. By fabricating thin membrane BCZYZn electrolyte (about 30 μm in thickness) on NiO–BCZYZn anode support, PCMFCs were assembled and tested by selecting stable BSZF perovskite cathode. An open-circuit potential of 1.00 V, a maximum power density of 236 mW cm⁻², and a low polarization resistance of the electrodes of 0.17 Ω cm² were achieved at 700 °C. This investigation indicated that proton conducting electrolyte BCZYZn with BSZF perovskite cathode is a promising material system for the next generation solid oxide fuel cells.     

Co-free, iron perovskites as cathode materials for intermediate-temperature solid oxide fuel cells

We have developed a Co-free solid oxide fuel cell (SOFC) based upon Fe mixed oxides that gives an extraordinary performance in test-cells with H₂ as fuel. As cathode material, the perovskite Sr_0.9K_0.1FeO_3−δ (SKFO) has been selected since it has an excellent ionic and electronic conductivity and long-term stability under oxidizing conditions; the characterization of this material included X-ray diffraction (XRD), thermal analysis, scanning microscopy and conductivity measurements. The electrodes were supported on a 300-μm thick pellet of the electrolyte La_0.8Sr_0.2Ga_0.83Mg_0.17O_3−δ (LSGM) with Sr₂MgMoO₆ as the anode and SKFO as the cathode. The test cells gave a maximum power density of 680 mW cm⁻² at 800°C and 850 mW cm⁻² at 850 °C, with pure H₂ as fuel. The electronic conductivity shows a change of regime at T ≈ 350 °C that could correspond to the phase transition from tetragonal to cubic symmetry. The high-temperature regime is characterized by a metallic-like behavior. At 800 °C the crystal structure contains 0.20(1) oxygen vacancies per formula unit randomly distributed over the oxygen sites (if a cubic symmetry is assumed). The presence of disordered vacancies could account, by itself, for the oxide-ion conductivity that is required for the mass transport across the cathode. The result is a competitive cathode material containing no cobalt that meets the target for the intermediate-temperature SOFC.     

Characterization of Pr1−xSrxCo0.8Fe0.2O3−δ (0.2 ≤ x ≤ 0.6) cathode materials for intermediate-temperature solid oxide fuel cells

Cathode materials consisting of Pr_1−xSr_xCo_0.8Fe_0.2O_3−δ (x = 0.2–0.6) were prepared by the sol–gel process for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The samples had an orthorhombic perovskite structure. The electrical conductivities were all higher than 279 S cm⁻¹. The highest conductivity, 1040 S cm⁻¹, was found at 300 °C for the composition x = 0.4. Symmetrical cathodes made of Pr_0.6Sr_0.4Co_0.8Fe_0.2O_3−δ (PSCF)–Ce_0.85Gd_0.15O_1.925 (50:50 by weight) composite powders were screen-printed on GDC electrolyte pellets. The area specific resistance value for the PSCF–GDC cathode was as low as 0.046 Ω cm² at 800 °C. The maximum power densities of a cell using the PSCF–GDC cathode were 520 mW cm⁻², 435 mW cm⁻² and 303 mW cm⁻² at 800 °C, 750 °C and 700 °C, respectively.     

Layered GdBa0.5Sr0.5Co2O5+δ as a cathode for intermediate-temperature solid oxide fuel cells

The layered GdBa_0.5Sr_0.5Co₂O_5+δ (GBSC) perovskite oxides are synthesized by Pechini method and investigated as a novel cathode material for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The single cell of NiO–SDC (Sm_0.2Ce_0.8O_1.9)/SDC (20 μm)/GBSC (10 μm) is operated from 550 to 700 °C fed with humidified H₂ as fuel and the static air as oxidant. An open circuit voltage of 0.8 V and a maximum power density of 725 mW cm⁻² are achieved at 700 °C. The interfacial polarization resistance is as low as 0.88, 0.29, 0.13 and 0.05 Ω cm² at 550, 600, 650 and 700 °C, respectively. The ratio of polarization resistance to total cell resistance decreases with the increase in the operating temperature, from 60% at 550 °C to 21% at 700 °C, respectively. The experimental results indicate that GBSC is a promising cathode material for IT-SOFCs.     

Electrochemical characteristics of an La0.6Sr0.4Co0.2Fe0.8O3–La0.8Sr0.2MnO3 multi-layer composite cathode for intermediate-temperature solid oxide fuel cells

An La_0.6Sr_0.4Co_0.2Fe_0.8O₃–La_0.8Sr_0.2MnO₃ (LSCF–LSM) multi-layer composite cathode for solid oxide fuel cells (SOFCs) was prepared on an yttria-stabilized zirconia (YSZ) electrolyte by the screen-printing technique. Its cathodic polarization curves and electrochemical impedance spectra were measured and the results were compared with those for a conventional LSM/LSM–YSZ cathode. While the LSCF–LSM multi-layer composite cathode exhibited a cathodic overpotential lower than 0.13 V at 750 °C at a current density of 0.4 A cm⁻², the overpotential for the conventional LSM–YSZ cathode was about 0.2 V. The electrochemical impedance spectra revealed a better electrochemical performance of the LSCF–LSM multi-layer composite cathode than that of the conventional LSM/LSM–YSZ cathode; e.g., the polarization resistance value of the multi-layer composite cathode was 0.25 Ω cm² at 800 °C, nearly 40% lower than that of LSM/LSM–YSZ at the same temperature. In addition, an encouraging output power from an YSZ-supported cell using an LSCF–LSM multi-layer composite cathode was obtained.     

Study on BaCo0.7Fe0.2Nb0.1O3−δ—SDC composite cathodes for intermediate temperature solid oxide fuel cell

BaCo_0.7Fe_0.2Nb_0.1O_3−δ(BCFN)/Ce_0.8Sm_0.2O_1.9(SDC) composite material was prepared and characterized as cathode for intermediate temperature solid oxide fuel cells. The X-ray diffraction result proved that there was no obvious reaction between the BCFN and SDC after calcination at 1000 °C for 10 h. AC impedance spectra based on La_0.9Sr_0.1Ga_0.8Mg_0.2O_3−δ(LSGM) electrolyte measured at intermediate temperatures showed that a cathode with 30 wt% SDC exhibited the best electrochemical performance among the electrodes studied. The interfacial resistance value for BCFN/30SDC was as low as 0.0104, 0.017, 0.029, and 0.062 Ω cm² at 800, 750, 700 and 650 °C, respectively. The maximum power density of a single cell with BCFN/30SDC cathode, Ni_0.9Cu_0.1-SDC anode, and LSGM/SDC electrolyte was 209.7, 298.2, 407.1, 543.4 and 697.9 mW cm⁻² at 600, 650, 700, 750 and 800 °C.     

La0.84Sr0.16MnO3−δ cathodes impregnated with Bi1.4Er0.6O3 for intermediate-temperature solid oxide fuel cells

La_0.84Sr_0.16MnO_3−δ–Bi_1.4Er_0.6O₃ (LSM–ESB) composite cathodes are fabricated by impregnating LSM electronic conducting matrix with the ion-conducting ESB for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The performance of LSM–ESB cathodes is investigated at temperatures below 750 °C by AC impedance spectroscopy. The ion-impregnation of ESB significantly enhances the electrocatalytic activity of the LSM electrodes for the oxygen reduction reactions, and the ion-impregnated LSM–ESB composite cathodes show excellent performance. At 750 °C, the value of the cathode polarization resistance (R_p) is only 0.11 Ω cm² for an ion-impregnated LSM–ESB cathode, which also shows high stability during a period of 200 h. For the performance testing of single cells, the maximum power density is 0.74 W cm⁻² at 700 °C for a cell with the LSM–ESB cathode. The results demonstrate the ion-impregnated LSM–ESB is one of the promising cathode materials for intermediate-temperature solid oxide fuel cells.     

La0.6Sr0.4Fe0.8Cu0.2O3−δ perovskite oxide as cathode for IT-SOFC

A La_0.6Sr_0.4Fe_0.8Cu_0.2O_3−δ (LSFCu) perovskite was investigated as a cathode material for intermediate-temperature solid oxide fuel cells (IT-SOFC). The LSFCu material exhibited chemical compatibility with the Sm_0.2Ce_0.8O_1.9 (SDC) electrolyte up to a temperature of 1100 °C. The electrical conductivity of the sintered sample was measured as a function of temperature from 100 to 800 °C. The highest conductivity of about 238 S cm⁻¹ was observed for LSFCu. The average thermal-expansion coefficient (TEC) of LSFCu was 14.6 × 10⁻⁶ K⁻¹, close to that of typical CeO₂ electrolyte material. The investigation of electrical properties indicated that the LSFCu cathode had lower interfacial polarization resistance of 0.070 Ω cm² at 800 °C and 0.138 Ω cm² at 750 °C in air. An electrolyte-supported single cell with 300 μm thick SDC electrolyte and LSFCu as cathode shows peak power densities of 530 mW cm⁻² at 800 °C.     

Characterization of the 75% Gd0.8Sr0.2CoO3−δ/25% Ce0.9Gd0.1O2−δ composite cathode system for use in intermediate temperature solid oxide fuel cells

The composite cathode system is examined for suitability on a Ce_0.9Gd_0.1O_2−δ electrolyte based solid oxide fuel cell at intermediate temperatures (500–700 °C). The cathode is characterized for electronic conductivity and area specific charge transfer resistance. This cathode system is chosen for its excellent thermal expansion match to the electrolyte, its relatively high conductivity (115 S cm⁻¹ at 700 °C), and its low activation energy for oxygen reduction (99 kJ mol⁻¹). It is found that the decrease of sintering temperature of the composite cathode system produces a significant decrease in charge transfer resistances to as low as 0.25 Ω cm². The conductivity of the cathode systems is between 40 and 88 S cm⁻¹ for open porosities of 30–40%.     

Nano-structured (La, Sr)(Co, Fe)O3 + YSZ composite cathodes for intermediate temperature solid oxide fuel cells

A nano-structured La_0.8Sr_0.2Co_0.5Fe_0.5O₃ + Y₂O₃ doped ZrO₂ (LSCF + YSZ) composite cathode was prepared by impregnation of a LSCF-containing solution into porous YSZ structure presintered on the YSZ electrolyte. The result shows that the LSCF phase was formed at 700 °C, forming a nano-structured, effective and functional LSCF + YSZ composite cathode that not only produces high triple phase boundaries for the O₂ reduction reaction, but also provides a structurally stable interface between the LSCF and YSZ. The electrode polarization resistance for the O₂ reduction reaction is from 0.539 to 0.047 Ω cm² between 600 and 750 °C, indicating the promising potential the LSCF + YSZ as a high performance cathode for intermediate temperature solid oxide fuel cells.     

A high performance intermediate temperature fuel cell based on a thick oxide–carbonate electrolyte

A high performance intermediate temperature fuel cell (ITFC) with composite electrolyte composed of co-doped ceria Ce_0.8Gd_0.05Y_0.15O_1.9 (GYDC) and a binary carbonate-based (52 mol% Li₂CO₃/48 mol% Na₂CO₃), 1.2 mm thick electrolyte layer has been developed. Co-doped Ce_0.8Gd_0.05Y_0.15O_1.9 was synthesized by a glycine–nitrate process and used as solid support matrix for the composite electrolyte. The conductivity of both composite electrolyte and GYDC supporting substrate were measured by AC impedance spectroscopy. It showed a sharp conductivity jump at about 500 °C when the carbonates melted. Single cells with thick electrolyte layer were fabricated by a dry-pressing technique using NiO as anode and Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ or lithiated NiO as cathode. The cell was tested at 450–550 °C using hydrogen as the fuel and air as the oxidant. Excellent performance with high power density of 670 mW cm⁻² at 550 °C was achieved for a 1.2 mm thick composite electrolyte containing 40 wt% carbonates which is much higher than that of a cell based on pure GYDC with a 70 μm thick electrolyte layer.     

High-performance PrBaCo2O5+δ-Ce0.8Sm0.2O1.9 composite cathodes for intermediate temperature solid oxide fuel cell

PrBaCo₂O_5+δ-Ce_0.8Sm_0.2O_1.9 (PBCO-SDC) composite material are prepared and characterized as cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). The powder X-ray diffraction result proves that there are no obvious reaction between the PBCO and SDC after calcination at 1100 °C for 3 h. AC impedance spectra based on SDC electrolyte measured at intermediate temperatures shows that the addition of SDC to PBCO improved remarkably the electrochemical performance of a PBCO cathode, and that a PBCO-30SDC cathode exhibits the best electrochemical performance in the PBCO-xSDC system. The total interfacial resistances R_p is the smallest when the content of SDC is 30 wt%, where the value is 0.035 Ω cm² at 750 °C, 0.072 Ω cm² at 700 °C, and 0.148 Ω cm² at 650 °C, much lower than the corresponding interfacial resistance for pure PBCO. The maximum power density of an anode-supported single cell with PBCO-30SDC cathode, Ni-SDC anode, and dense thin SDC/LSGM (La_0.9Sr_0.1Ga_0.8Mg_0.2O_3−δ)/SDC tri-layer electrolyte are 364, 521 and 741 mW cm⁻² at 700, 750 and 800 °C, respectively.     

Fabrication of bilayered YSZ/SDC electrolyte film by electrophoretic deposition for reduced-temperature operating anode-supported SOFC

Bilayered Y₂O₃-stabilized ZrO₂ (YSZ)/Sm₂O₃-doped CeO₂ (SDC) electrolyte films were successfully fabricated on porous NiO–YSZ composite substrates by electrophoretic deposition (EPD) based on electrophoretic filtration followed by co-firing with the substrates. In EPD, positively charged YSZ and SDC powders were deposited directly on the substrates, layer by layer from ethanol-based suspensions. Delamination between YSZ and SDC films was avoided by reducing the SDC films’ thickness to ca. 1 μm. A single cell was constructed on the bilayered electrolyte films composed of ca. 4 μm-thick YSZ and ca. 1 μm-thick SDC films. As a cathode in the cell, La_0.6Sr_0.4Co_0.2Fe_0.8O_3−x (LSCF) was used. Maximum output power densities greater than 0.6 W cm⁻² were obtained at 700 °C for the bilayered YSZ/SDC electrolyte cells thus constructed.     

Cube-type micro SOFC stacks using sub-millimeter tubular SOFCs

Fabrication and characterization of tubular SOFCs under sub-millimeter (0.8 mm), bundles and stacks for low temperature operation were shown. The materials used in this study were Gd doped CeO₂ (GDC) for electrolyte, NiO–GDC for anode and (La, Sr)(Co, Fe)O₃ (LSCF)–GDC for cathode, respectively, and LSCF for supports of the tubular cells for bundle fabrication. After applying a sealing layer and current collector for each bundle of five micro tubular SOFCs, each bundle was stacked vertically, to build a four-storey cube-type stack with volume of about 0.8 cm³. The performance of the stack was shown to be 3.6 V OCV and 2 W maximum output power under 500 °C operating temperature. Preliminary quick start-up test was also conducted at the condition of 3 min start-up time from 150 to 400 °C for 5 times, and the results showed no degradation of the performance during the test.     

LSCF–SDC core–shell high-performance durable composite cathode

Core–shell type La_0.6Sr_0.4Co_0.2Fe_0.8O_3−d (LSCF)–Sm_0.2Ce_0.8O_2−d (SDC) powders are synthesized to achieve a high-performance durable cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). The SDC core size is controlled so that all core particles are surrounded by the LSCF particles with no unattached spots. Such a core–shell composite cathode develops an ideal microstructure with improved phase contiguity, homogeneity, and maximized triple-phase boundary density. The cathode that involves an SDC core of 500 nm exhibits the lowest interfacial polarization resistance (0.265 Ω cm² at 650 °C), as well as long-term stability during both thermo-cyclic and electrochemically accelerated tests.     

A high performance BaZr0.1Ce0.7Y0.2O3-δ-based solid oxide fuel cell with a cobalt-free Ba0.5Sr0.5FeO3-δ–Ce0.8Sm0.2O2-δ composite cathode

A cobalt-free Ba_0.5Sr_0.5FeO_3-δ–Ce_0.8Sm_0.2O_2-δ (BSF–SDC) composite is employed as a cathode for an anode-supported proton-conducting solid oxide fuel cells (H-SOFCs) using BaZr_0.1Ce_0.7Y_0.2O_3-δ (BZCY) as the electrolyte. The chemical compatibility between BSF and SDC is evaluated. The XRD results show that BSF is chemically compatible with SDC after co-fired at 1000 °C for 6 h. A single cell with a 20-μm-thick BZCY electrolyte membrane exhibits excellent power densities as high as 792 and 696 mW cm⁻² at 750 and 700 °C, respectively. To the best of our knowledge, this is the highest performance reported in literature up to now for BZCY-based single cells with cobalt-free cathode materials. Extremely low polarization resistances of 0.030 and 0.044 Ωcm² are achieved at 750 and 700 °C respectively. The excellent performance implies that the cobalt-free BSF–SDC composite is a promising alternative cathode for H-SOFCs. Resistances of the tested cell are investigated under open circuit conditions at different operating temperatures by impedance spectroscopy.     

ZnO-doped BaZr0.85Y0.15O3−δ proton-conducting electrolytes: Characterization and fabrication of thin films

ZnO-doped BaZr_0.85Y_0.15O_3−δ perovskite oxide sintered at 1500 °C has bulk conductivity of the order of 10⁻² S cm⁻¹ above 650 °C, which makes it an attractive proton-conducting electrolyte for intermediate-temperature solid oxide fuel cells. The structure, morphology and electrical conductivity of the electrolyte vary with sintering temperature. Optimal electrochemical performance is achieved when the sintering temperature is about 1500 °C. Cathode-supported electrolyte assemblies were prepared using spin coating technique. Thin film electrolytes were shown to be dense using SEM and EDX analyses.     

Characterization of nanosized Ce0.8Sm0.2O1.9-infiltrated Sm0.5Sr0.5Co0.8Cu0.2O3−δ cathodes for solid oxide fuel cells

This study investigates the microstructure and electrochemical properties of Sm_0.5Sr_0.5Co_0.8Cu_0.2O_3−δ (SSC-Cu) cathode infiltrated with Ce_0.8Sm_0.2O_1.9 (SDC). The newly formed nanosized electrolyte material on the cathode surface, leading the increase in electrochemical performances is mainly attributed to the creation of electrolyte/cathode phase boundaries, which considerably increases the electrochemical sites for oxygen reduction reaction. Based on the experiment results, the 0.4 M SDC infiltration reveals the lowest cathode polarization resistance (R_P), the cathode polarization resistances (R_p) are 0.117, 0.033, and 0.011 Ω cm² at 650, 750, and 850 °C, and the highest peak power density, are 439, 659, and 532 mW cm⁻² at 600, 700, and 800 °C, respectively. The cathode performance in SOFCs can be significantly improved by infiltrating nanoparticles of SDC into an SSC-Cu porous backbone. This study reveals that the infiltration approach may apply in SOFCs to improve their electrochemical properties.     

Novel cobalt-free cathode materials BaCexFe1−xO3−δ for proton-conducting solid oxide fuel cells

A series of cobalt-free and low cost BaCe_xFe_1−xO_3−δ (x = 0.15, 0.50, 0.85) materials are successful synthesized and used as the cathode materials for proton-conducting solid oxide fuel cells (SOFCs). The single cell, consisting of a BaZr_0.1Ce_0.7Y_0.2O_3−δ (BZCY7)-NiO anode substrate, a BZCY7 anode functional layer, a BZCY7 electrolyte membrane and a BaCe_xFe_1−xO_3−δ cathode layer, is assembled and tested from 600 to 700 °C with humidified hydrogen (3% H₂O) as the fuel and the static air as the oxidant. Within all the cathode materials above, the cathode BaCe_0.5Fe_0.5O_3−δ shows the highest cell performance which could obtain an open-circuit potential of 0.99 V and a maximum power density of 395 mW cm⁻² at 700 °C. The results indicate that the Fe-doped barium cerates can be promising cathodes for proton-conducting SOFCs.