共查询到20条相似文献,搜索用时 78 毫秒
1.
Supporting Pt and Pd catalysts have been examined for the reduction of NO with H 2 in the presence of oxygen and moisture. All catalysts showed a conversion maximum in the NO reduction at around 373 K. An additional conversion maximum was found to appear at around 573 K over several metal oxides supporting Pd, and Pd/TiO 2 gave the highest conversion at around 573 K among the catalysts tested. In the reaction at 373 K, NO might be reduced directly by H 2 both on Pt and Pd catalysts to give N 2 and N 2O. At the conversion maximum of the Pd/TiO 2 catalyst at 575 K, however, in situ generated NO 2 seems to react with H 2. 相似文献
2.
We have investigated the catalytic behavior of Pt encapsulated TiO 2 nanotubes for the water gas shift reaction as well as the hydrogenation of CO. Pt–TiO 2 nanotube catalysts were prepared by employing fine fiber shaped crystals of [Pt(NH 3) 4](HCO 3) 2 complex as a structure determining template material. The turnover frequencies (TOF) of these nanotube catalysts were more than one order of magnitude larger than conventional impregnation Pt/TiO 2 catalysts, and the selectivity for methanol in CO–H 2 reaction was extraordinary high compared to the impregnation catalysts. The XPS and XRD analyses of the nanotubes revealed characteristic electronic state of reduced TiO 2 (Ti 3+ in rutile structure) with zerovalent Pt even after the calcination at 773 K. In WGS reaction, electron rich Ti 3+ on the nanotube wall may play an important role to activate water molecules for the oxidation of CO. In CO–H 2 reaction, similar promotion effect of Ti 3+ species may be operating for selective methanol formation by supplying active OH(a). 相似文献
3.
The water-gas shift (WGS) activity of platinum catalysts dispersed on a variety of single metal oxides as well as on composite MO x/Al 2O 3 and MO x/TiO 2 supports (M = Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Y, Zr, La, Ce, Nd, Sm, Eu, Gd, Ho, Er, Tm) has been investigated in the temperature range of 150–500 °C, using a feed composition consisting of 3% CO an 10% H 2O. For Pt catalysts supported on single metal oxides, it has been found that both the apparent activation energy of the reaction and the intrinsic rate depend strongly on the nature of the support. In particular, specific activity of Pt at 250 °C is 1–2 orders of magnitude higher when supported on “reducible” compared to “irreducible” metal oxides. For composite Pt/MO x/Al 2O 3 and Pt/MO x/TiO 2 catalysts, it is shown that the presence of MO x results in a shift of the CO conversion curve toward lower reaction temperatures, compared to that obtained for Pt/Al 2O 3 or Pt/TiO 2, respectively. The specific reaction rate is in most cases higher for composite catalysts and varies in a manner which depends on the nature, loading, and primary crystallite size of dispersed MO x. Results are explained by considering that reducibility of small oxide particles increases with decreasing crystallite size, thereby resulting in enhanced WGS activity. Therefore, evidence is provided that the metal oxide support is directly involved in the WGS reaction mechanism and determines to a significant extent the catalytic performance of supported noble metal catalysts. Results of catalytic performance tests obtained under realistic feed composition, consisting of 3% CO, 10% H 2O, 20% H 2 and 6% CO 2, showed that certain composite Pt/MO x/Al 2O 3 and Pt/MO x/TiO 2 catalysts are promising candidates for the development of active WGS catalysts suitable for fuel cell applications. 相似文献
4.
Conversion of NO x with reducing agents H 2, CO and CH 4, with and without O 2, H 2O, and CO 2 were studied with catalysts based on MOR zeolite loaded with palladium and cerium. The catalysts reached high NO x to N 2 conversion with H 2 and CO (>90% conversion and N 2 selectivity) range under lean conditions. The formation of N 2O is absent in the presence of both H 2 and CO together with oxygen in the feed, which will be the case in lean engine exhaust. PdMOR shows synergic co-operation between H 2 and CO at 450–500 K. The positive effect of cerium is significant in the case of H 2 and CH 4 reducing agent but is less obvious with H 2/CO mixture and under lean conditions. Cerium lowers the reducibility of Pd species in the zeolite micropores. The catalysts showed excellent stability at temperatures up to 673 K in a feed with 2500 ppm CH 4, 500 ppm NO, 5% O 2, 10% H 2O (0–1% H 2), N 2 balance but deactivation is noticed at higher temperatures. Combining results of the present study with those of previous studies it shows that the PdMOR-based catalysts are good catalysts for NO x reduction with H 2, CO, hydrocarbons, alcohols and aldehydes under lean conditions at temperatures up to 673 K. 相似文献
5.
Highly dispersed titanium oxide catalysts have been prepared within zeolite cavities as well as in the zeolite framework and utilized as photocatalysts for the reduction of CO 2 with H 2O to produce CH 4 and CH 3OH at 328 K. In situ photoluminescence, ESR, diffuse reflectance absorption and XAFS investigations indicate that the titanium oxide species are highly dispersed within the zeolite cavities and framework and exist in tetrahedral coordination. The charge transfer excited state of the highly dispersed titanium oxide species play a significant role in the reduction of CO 2 with H 2O with a high selectivity for the formation of CH 3OH, while the catalysts involving the aggregated octahedrally coordinated titanium oxide species show a high selectivity to produce CH 4, being similar to reactions on the powdered TiO 2 catalysts. Ti-mesoporous molecular sieves exhibit high photocatalytic reactivity for the formation of CH 3OH, its reactivity being much higher than the powdered TiO 2 catalysts. The addition of Pt onto the highly dispersed titanium oxide catalysts promotes the charge separation which leads to an increase in the formation of CH 4 in place of CH 3OH formation. 相似文献
6.
ZrO 2–TiO 2 mixed oxides, prepared using the sol–gel method, were used as supports for platinum catalysts. The effects of catalyst pre-reduction and surface acidity on the performance of Pt/ZT catalysts for the reduction of NO with CH 4 were studied. The diffuse reflectance infrared Fourier transformed (DRIFT) spectra of CO adsorbed on the Pt/ZT catalysts, and also on the Pt/T and Pt/Z references, pre-reduced at 773 K in hydrogen, revealed that an SMSI state is developed in the Ti-rich oxide-supported platinum catalysts. However, no shift in the binding energy of Pt 4f 7/2 level for Pt/T and Pt deposited on Ti-rich support counterparts pre-reduced at 773 K was found by photoelectron spectroscopy. The DRIFT spectra of the catalysts under the NO+O 2 co-adsorption revealed the appearance of nitrite/nitrate species on the surface of the Zr-containing catalysts, which displayed acidic properties, but were almost absent in the Pt/T catalyst. The intensity of these bands reached a maximum for the Pt/ZT(1:1) catalyst, which in turn exhibited a larger specific area. In the absence of oxygen in the feed stream, the NO+CH 4 reaction showed DRIFT spectra assigned to surface isocyano species. Since the intensity of this band is higher for the Pt/ZT (9:1) catalyst, it seems that such species are developed at the Pt–support interface. 相似文献
7.
A commercial activated carbon (AC) was used as a catalyst support either in its original form or after two different oxidation treatments, namely air oxidation and HNO 3 oxidation, aiming at the enhancement of its textural and surface chemical characteristics. These properties were determined by N 2 adsorption and temperature programmed desorption (TPD), respectively. Monometallic Pt and bimetallic Pt–Sn catalysts were prepared on the AC supports. Impregnation was used in the preparation of the monometallic samples. For the bimetallic samples, coimpregnation and a sequential impregnation procedure, in which the Sn precursor is introduced prior to Pt, were used. The Pt load was kept fixed as 1 wt.% for all monometallic and bimetallic samples. Two different Sn loads, 0.25 and 0.50 wt.%, were used for the bimetallic samples in order to investigate the effects of Sn load on the catalytic properties. The catalyst samples were characterized by H 2 adsorption, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and structure insensitive benzene hydrogenation. The activities of all samples were measured in CO oxidation. The results indicate the strong effects of the surface chemistry of the AC supports, the Pt:Sn ratio, the preparation procedure and the reduction procedure, on the CO oxidation activities of the catalysts. 相似文献
8.
The catalytic activity of Pt on alumina catalysts, with and without MnO x incorporated to the catalyst formulation, for CO oxidation in H 2-free as well as in H 2-rich stream (PROX) has been studied in the temperature range of 25–250 °C. The effect of catalyst preparation (by successive impregnation or by co-impregnation of Mn and Pt) and Mn content in the catalyst performance has been studied. A low Mn content (2 wt.%) has been found not to improve the catalyst activity compared to the base catalyst. However, catalysts prepared by successive impregnation with 8 and 15 wt.% Mn have shown a lower operation temperature for maximum CO conversion than the base catalyst with an enhanced catalyst activity at low temperatures with respect to Pt/Al 2O 3. A maximum CO conversion of 89.8%, with selectivity of 44.9% and CO yield of 40.3% could be reached over a catalyst with 15 wt.% Mn operating at 139 °C and λ = 2. The effect of the presence of 5 vol.% CO 2 and 5 vol.% H 2O in the feedstream on catalysts performance has also been studied and discussed. The presence of CO 2 in the feedstream enhances the catalytic performance of all the studied catalysts at high temperature, whereas the presence of steam inhibits catalysts with higher MnO x content. 相似文献
9.
二甲醚是一种理想的氢载体,可用于解决氢的储存和运输。以Pt/TiO_2为部分氧化催化剂,结合Ni/Al_2O_3重整催化剂,考察钛前驱体和焙烧温度对二甲醚部分氧化重整制氢反应的影响。结果表明,以Ti(C4H9O)4为原料制备的TiO_2为金红石相,Ti(SO4)2或Ti O(OH)2为原料制备的TiO_2为锐钛矿相;以Ti(C4H9O)4为原料制备的Pt/TiO_2-E催化剂催化性能略好,转化率接近100%,H2收率约90%,表明金红石相TiO_2负载的Pt催化剂略佳;以Ti(SO4)2为原料制备的Pt/TiO_2-S催化剂500℃焙烧可获得金红石相TiO_2。与Pt/Al_2O_3催化剂相比,Pt/TiO_2催化剂具有更好的催化性能,H2收率超过90%,而Pt/Al_2O_3催化剂H2收率约80%。 相似文献
10.
NO removal using CH 4 as a reductant in a dual-bed system has been investigated with Co-NaX and Ag-NaX catalysts, which were prepared by Co 2+-, Ag +-ion exchange into zeolite NaX, respectively, and activation for 5 h at 500 °C. The experimental result has been compared with that of a Co-NaX-CO catalyst, additionally pre-treated under CO flow for the Co-NaX catalyst. The cobalt crystal structure of a Co-NaX-CO catalyst is Co 3O 4, which promotes NO oxidation to NO 2 by excess O 2 at a low temperature (523 K). The mechanical mixture of Co-NaX-CO and Ag-NaX catalysts shows a synergy effect on NO reduction to N 2 by CH 4 in the presence of excess O 2 and H 2O, but the NO reduction decreases quickly as time passes. However, the NO reduction to N 2 in a deNO bed at 523 K and a deNO 2 bed at 423 K, which are relatively lower than the reaction temperatures for common SCR systems, still remained at 67% even in a H 2O 10% gas mixture after 160 min. 相似文献
11.
The TiO 2 supported noble metal (Au, Rh, Pd and Pt) catalysts were prepared by impregnation method and characterized by means of X-ray diffraction (XRD) and BET. These catalysts were tested for the catalytic oxidation of formaldehyde (HCHO). It was found that the order of activity was Pt/TiO 2 Rh/TiO 2 > Pd/TiO 2 > Au/TiO 2 TiO 2. HCHO could be completely oxidized into CO 2 and H 2O over Pt/TiO 2 in a gas hourly space velocity (GHSV) of 50,000 h −1 even at room temperature. In contrast, the other catalysts were much less effective for HCHO oxidation at the same reaction conditions. HCHO conversion to CO 2 was only 20% over the Rh/TiO 2 at 20 °C. The Pd/TiO 2 and Au/TiO 2 showed no activities for HCHO oxidation at 20 °C. The different activities of the noble metals for HCHO oxidation were studied with respect to the behavior of adsorbed species on the catalysts surface at room temperature using in situ DRIFTS. The results show that the activities of the TiO 2 supported Pt, Rh, Pd and Au catalysts for HCHO oxidation are closely related to their capacities for the formation of formate species and the formate decomposition into CO species. Based on in situ DRIFTS studies, a simplified reaction scheme of HCHO oxidation was also proposed. 相似文献
12.
以不同温度焙烧的TiO 2为载体,CuCl 2·2H 2O为铜源,NaOH为沉淀剂,L-抗坏血酸钠为还原剂,采用液相还原-沉积沉淀法制备了Cu 2O/TiO 2,借助X射线粉末衍射(XRD)、H 2程序升温还原(H 2-TPR)、N 2-物理吸附、透射电镜(TEM)、X射线光电子能谱(XPS)等手段,研究了TiO 2载体焙烧温度对Cu 2O/TiO 2甲醛乙炔化反应性能的影响。结果表明,低温焙烧得到的TiO 2载体以锐钛矿相存在,与Cu 2O物种间具有弱的相互作用,使得Cu 2O被过度还原为金属Cu,催化活性较低。随着载体焙烧温度的升高,TiO 2中出现金红石相,Cu 2O与载体间相互作用增强,Cu 2O高效转变为乙炔亚铜活性物种,使催化剂表现出最佳的催化性能。 相似文献
13.
The kinetics of CO oxidation and NO reduction reactions over alumina and alumina-ceria supported Pt, Rh and bimetallic Pt/Rh catalysts coated on metallic monoliths were investigated using the step response technique at atmospheric pressure and at temperatures 30–350°C. The feed step change experiments from an inert flow to a flow of a reagent (O 2, CO, NO and H 2) showed that the ceria promoted catalysts had higher adsorption capacities, higher reaction rates and promoting effects by preventing the inhibitory effects of reactants, than the alumina supported noble metal catalysts. The effect of ceria was explained with adsorbate spillover from the noble metal sites to ceria. The step change experiments CO/O 2 and O 2/CO also revealed the enhancing effect of ceria. The step change experiments NO/H 2 and H 2/NO gave nitrogen as a main reduction product and N 2O as a by-product. Preadsorption of NO on the catalyst surface decreased the catalyst activity in the reduction of NO with H 2. The CO oxidation transients were modeled with a mechanism which consistent of CO and O 2 adsorption and a surface reaction step. The NO reduction experiments with H 2 revealed the role of N 2O as a surface intermediate in the formation of N 2. The formation of NN bonding was assumed to take place prior to, partly prior to or totally following to the NO bond breakage. High NO coverage favors N 2O formation. Pt was shown to be more efficient than Rh for NO reduction by H 2. 相似文献
14.
The objective of this research is to asses the impact of the addition of H 2O, SO 2, and both in the SCR of NO at low temperatures over sulphated vanadia on carbon-coated monoliths. The sulphated catalyst keeps a 100% conversion and total selectivity to N 2 in the low temperature range, i.e. 473–500 K, when either H 2O or SO 2 is added to the gas feed. However, a decline of steady state conversion and selectivity occurs when both H 2O and SO 2 are added simultaneously because H 2O speeds up the deposition of ammonium sulphate salts. This decrease of catalyst performance is reversed when the reaction is carried out under dry conditions at temperatures higher than 473 K but not at lower temperature (453 K). Thus, the catalyst has demonstrated to be a good candidate for the SCR of NO at low temperatures even in stack gases containing traces of undesired components. 相似文献
15.
NO x sorption and reduction capacities of 12-tungstophosphoric acid hexahydrate (H 3PW 12O 40·6H 2O, HPW) were measured under representative alternating conditions of lean and rich exhaust-type gas mixture. Under lean conditions, the sorption of NO x is large and is equivalent to 37 mg of NO x/g HPW. Although a part of these NO x remains unreduced, HPW is able to reduce some of the NO x to produce N 2 by a reaction between the sorbed NO 2 and hydrocarbon (HC), but this process is slow. The addition of 1% Pt affects strongly the chemical behaviour occurring during the course of a rich operation. The NO desorption observed at the beginning of the rich phase is strongly accelerated. The direct correlation between NO 2 consumption and CO 2 production shows that the principal pathway is the reaction CO+NO 2→CO 2+NO. In a mixture of reducing gas (CO, HC, H 2), the competition is strongly in favour of CO though in its absence the reaction observed was the hydrogenation of propene to propane. 相似文献
16.
During the reactions related to oxidative steam reforming and combustion of methane over -alumina-supported Ni catalysts, the temperature profiles of the catalyst bed were studied using an infrared (IR) thermograph. IR thermographical images revealed an interesting result: that the temperature at the catalyst bed inlet is much higher under CH 4/H 2O/O 2/Ar = 20/10/20/50 than under CH 4/H 2O/O 2/Ar = 10/0/20/70; the former temperature is comparable to that over noble metal catalysts such as Pt and Pd. Based on the temperature-programmed reduction and oxidation measurements over fresh and used catalysts, the metallic Ni is recognized at the catalyst bed inlet under CH 4/H 2O/O 2/Ar = 20/10/20/50, although it is mainly oxidized to NiAl 2O 4 under CH 4/H 2O/O 2/Ar = 10/0/20/70. This result indicates that the addition of reforming gas (CH 4/H 2O = 10/10) to the combustion gas (CH 4/O 2 = 10/20) can stabilize Ni species in the metallic state even under the presence of oxygen in the gas phase. This would account for its extremely high combustion activity. 相似文献
17.
A multi-component NO x-trap catalyst consisting of Pt and K supported on γ-Al 2O 3 was studied at 250 °C to determine the roles of the individual catalyst components, to identify the adsorbing species during the lean capture cycle, and to assess the effects of H 2O and CO 2 on NO x storage. The Al 2O 3 support was shown to have NO x trapping capability with and without Pt present (at 250 °C Pt/Al 2O 3 adsorbs 2.3 μmols NO x/m 2). NO x is primarily trapped on Al 2O 3 in the form of nitrates with monodentate, chelating and bridged forms apparent in Diffuse Reflectance mid-Infrared Fourier Transform Spectroscopy (DRIFTS) analysis. The addition of K to the catalyst increases the adsorption capacity to 6.2 μmols NO x/m 2, and the primary storage form on K is a free nitrate ion. Quantitative DRIFTS analysis shows that 12% of the nitrates on a Pt/K/Al 2O 3 catalyst are coordinated on the Al 2O 3 support at saturation. When 5% CO2 was included in a feed stream with 300 ppm NO and 12% O2, the amount of K-based nitrate storage decreased by 45% after 1 h on stream due to the competition of adsorbed free nitrates with carboxylates for adsorption sites. When 5% H2O was included in a feed stream with 300 ppm NO and 12% O2, the amount of K-based nitrate storage decreased by only 16% after 1 h, but the Al2O3-based nitrates decreased by 92%. Interestingly, with both 5% CO2 and 5% H2O in the feed, the total storage only decreased by 11%, as the hydroxyl groups generated on Al2O3 destabilized the K–CO2 bond; specifically, H2O mitigates the NOx storage capacity losses associated with carboxylate competition. 相似文献
18.
The direct synthesis of methanethiol, CH 3SH, from CO and H 2S was investigated using sulfided vanadium catalysts based on TiO 2 and Al 2O 3. These catalysts yield high activity and selectivity to methanethiol at an optimized temperature of 615 K. Carbonyl sulfide and hydrogen are predominant products below 615 K, whereas above this temperature methane becomes the preferred product. Methanethiol is formed by hydrogenation of COS, via surface thioformic acid and methylthiolate intermediates. Water produced in this reaction step is rapidly converted into CO 2 and H 2S by COS hydrolysis. Titania was found to be a good catalyst for methanethiol formation. The effect of vanadium addition was to increase CO and H2S conversion at the expense of methanethiol selectivity. High activities and selectivities to methanethiol were obtained using a sulfided vanadium catalyst supported on Al2O3. The TiO2, V2O5/TiO2 and V2O5/Al2O3 catalysts have been characterized by temperature programmed sulfidation (TPS). TPS profiles suggest a role of V2O5 in the sulfur exchange reactions taking place in the reaction network of H2S and CO. 相似文献
19.
Catalytic performance of Sn/Al 2O 3 catalysts prepared by impregnation (IM) and sol–gel (SG) method for selective catalytic reduction of NO x by propene under lean burn condition were investigated. The physical properties of catalyst were characterized by BET, XRD, XPS and TPD. The results showed that NO 2 had higher reactivity than NO to nitrogen, the maximum NO conversion was 82% on the 5% Sn/Al 2O 3 (SG) catalyst, and the maximum NO 2 conversion reached nearly 100% around 425 °C. Such a temperature of maximum NO conversion was in accordance with those of NO x desorption accompanied with O 2 around 450 °C. The activity of NO reduction was enhanced remarkably by the presence of H 2O and SO 2 at low temperature, and the temperature window was also broadened in the presence of H 2O and SO 2, however the NO x desorption and NO conversion decreased sharply on the 300 ppm SO 2 treated catalyst, the catalytic activity was inhibited by the presence of SO 2 due to formation of sulfate species (SO 42−) on the catalysts. The presence of oxygen played an essential role in NO reduction, and the activity of the 5% Sn/Al 2O 3 (SG) was not decreased in the presence of large oxygen. 相似文献
20.
In this study, we examine the interaction of N 2O with TiO 2(1 1 0) in an effort to better understand the conversion of NO x species to N 2 over TiO 2-based catalysts. The TiO 2(1 1 0) surface was chosen as a model system because this material is commonly used as a support and because oxygen vacancies on this surface are perhaps the best available models for the role of electronic defects in catalysis. Annealing TiO 2(1 1 0) in vacuum at high temperature (above about 800 K) generates oxygen vacancy sites that are associated with reduced surface cations (Ti 3+ sites) and that are easily quantified using temperature programmed desorption (TPD) of water. Using TPD, X-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS), we found that the majority of N 2O molecules adsorbed at 90 K on TiO 2(1 1 0) are weakly held and desorb from the surface at 130 K. However, a small fraction of the N 2O molecules exposed to TiO 2(1 1 0) at 90 K decompose to N 2 via one of two channels, both of which are vacancy-mediated. One channel occurs at 90 K, and results in N 2 ejection from the surface and vacancy oxidation. We propose that this channel involves N 2O molecules bound at vacancies with the O-end of the molecule in the vacancy. The second channel results from an adsorbed state of N 2O that decomposes at 170 K to liberate N 2 in the gas phase and deposit oxygen adatoms at non-defect Ti 4+ sites. The presence of these O adatoms is clearly evident in subsequent water TPD measurements. We propose that this channel involves N 2O molecules that are bound at vacancies with the N-end of the molecule in the vacancy, which permits the O-end of the molecule to interact with an adjacent Ti 4+ site. The partitioning between these two channels is roughly 1:1 for adsorption at 90 K, but neither is observed to occur for moderate N 2O exposures at temperatures above 200 K. EELS data indicate that vacancies readily transfer charge to N 2O at 90 K, and this charge transfer facilitates N 2O decomposition. Based on these results, it appears that the decomposition of N 2O to N 2 requires trapping of the molecule at vacancies and that the lifetime of the N 2O–vacancy interaction may be key to the conversion of N 2O to N 2. 相似文献
|