共查询到20条相似文献,搜索用时 46 毫秒
1.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
2.
3.
4.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
5.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
6.
8.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
9.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
10.
11.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献
12.
13.
Based on the filtration equations with account of heat transfer in the heating region, the problem of instability of small
perturbations of the wave front of filtration combustion of a gas is solved. Expressions for the growth decrement and critical
transverse size of a perturbation are obtained. The problem of the wave-front stability is solved with account of the macroscopic
redistribution of filtration in the system. The solution includes macroscopic characteristics such as the transverse size,
the width of the high-temperature zone, etc. A method is proposed for taking into account the influence of the characteristics
of the system on the evolution of perturbations. It is shown that small deformation perturbations of the front always increase
to a certain amplitude; their subsequent development— continuation of their growth or stabilization—is determined by the characteristics
of the system.
Translated fromFizika Goreniya i Vzryva, Vol. 35, No. 5, pp. 3–5, September–October 1999. 相似文献
14.
Summary Investigation of the TEMPO-mediated polymerization of styrene at different regimes of addition of AIBN initiator showed that the course of the polymerization could be changed dramatically by a mode of the initiator addition without using any other additives. A very significant acceleration of the polymerization was reached at a specific regime without broadening the polydispersity of the resulting polymer. 相似文献
15.
Process schemes for implementation of the optimum conditions of the final stage of orientational drawing of PP fibre are proposed based on the results of mathematical modeling. The existence of successive stages of transformation of the structure of PP fibre in the second stage of orientational drawing was experimentally confirmed with indirect indexes. The necessity of selecting the draw ratio that ensures completeness of the given stage of structural transformation is demonstrated. Structural schemes are proposed for automated control systems for selecting the optimum draw ratio in the first and final stages of orientational drawing and control of the structure of the spun polymer with indirect parameters. 相似文献
16.
17.
18.
L. B. Khoroshavin I. I. Ovchinnikov E. Ya. Gimpelman 《Refractories and Industrial Ceramics》1994,35(12):415-416
The efficiency of the use of various refractories is estimated by an objective factor, namely, the coefficient of optimality of linings of heating units.Translated from Ogneupory, No. 12, pp. 26 – 27, December, 1994. 相似文献
19.