The treatment of sulfate-rich wastewater using an anaerobic sequencing batch biofilm pilot-scale reactor

This paper presents the results from 92 cycles of an anaerobic sequencing batch biofilm reactor containing biomass immobilized on inert support (mineral coal) applied for the treatment of an industrial wastewater containing high sulfate concentration. The pilot-scale reactor, with a total volume of 1.2 m³, was operated at sulfate loading rates ranging from 0.15 to 1.90 kgSO₄²⁻/cycle (48 h — cycle) corresponding to sulfate concentrations of 0.25 to 3.0 gSO₄²⁻ l^− 1. Domestic sewage and ethanol were utilized as electron donors for sulfate reduction. Influent sulfate concentrations were increased in order to evaluate the minimum COD/sulfate ratio at which high reactor performance could be maintained. The mean sulfate removal efficiency remained between the range of 88 to 92% at several sulfate concentrations. Temporal profiles along the 48 h cycles were carried out under stable operation at sulfate concentrations of 1.0, 2.0 and 3.0 gSO₄²⁻ l^− 1. Sulfate removal reached 99% for cycle times of 15, 25, and 30 h, and the effluents sulfate concentrations were lower than 8 mgSO₄²⁻ l^− 1. The results demonstrate the potential applicability of the anaerobic configuration for the biological treatment of sulfate-rich wastewaters.     

Immobilization of Candida rugosa lipase on modified natural wool fibers

A method has been developed to immobilize lipase from Candida rugosa on modified natural wool fibers by means of graft copolymerization of poly ethylacrylate in presence of potassium persulphate and Mohr’s salt redox initiator. The activities of free and immobilized lipase have been studied. FTIR spectroscopy, scanning electron microscopy, and the Bradford method were used to characterize lipase immobilization. The efficiency of the immobilization was evaluated by examining the relative enzymatic activity of free enzyme before and after the immobilization of lipase. The results showed that the optimum temperature of immobilized lipase was 40 °C, which was identical to that of the free enzyme, and the immobilized lipase exhibited a higher relative activity than that of free lipase over 40 °C. The optimal pH for immobilized lipase was 8.0, which was higher than that of the free lipase (pH 7.5), and the immobilization resulted in stabilization of enzyme over a broader pH range. The kinetic constant value (km) of immobilized lipase was higher than that of the free lipase. However, the thermal and operational stabilities of immobilized lipase have been improved greatly.     

Activated carbon fiber cloths as electrodes for high performance electric double layer capacitors

Activated carbon fiber cloth (ACFC) electrodes with high double layer capacitance and good rate capability were prepared from polyacrylonitrile (PAN) fabrics by optimizing the carbonization temperature prior to CO₂ activation. The carbonization temperature has a marked effect on both the pore structure and the electrochemical performances of the ACFCs. Moderate carbonization at 600 °C results in higher specific surface area and larger pore size, and hence higher capacitance and better rate capability. The specific capacitance of the ACFCs in 6 mol L⁻¹ KOH aqueous solution can be as high as 208 F g⁻¹. It remains 129 F g⁻¹ as the current density increases to 10 000 mA g⁻¹.     

Direct electrochemistry and electrocatalysis of cytochrome c based on chitosan-room temperature ionic liquid-carbon nanotubes composite

A robust and effective composite film combined the benefits of room temperature ionic liquid (RTIL), chitosan (Chi) and multi-wall carbon nanotubes (MWNTs) was prepared. Cytochrome c (Cyt c) was successfully immobilized on glassy carbon electrode (GCE) surface by entrapping in the composite film. Direct electrochemistry and electrocatalysis of immobilized Cyt c were investigated in detail. A pair of well-defined and quasi-reversible redox peaks of Cyt c was obtained in 0.1 mol L⁻¹ pH 7.0 phosphate buffer solution (PBS), indicating the Chi-RTIL-MWNTs film showed an obvious promotion for the direct electron transfer between Cyt c and the underlying electrode. The immobilized Cyt c exhibited an excellent electrocatalytic activity towards the reduction of H₂O₂. The catalysis current was linear to H₂O₂ concentration in the range of 2.0 × 10⁻⁶ to 2.6 × 10⁻⁴ mol L⁻¹, with a detection limit of 8.0 × 10⁻⁷ mol L⁻¹ (S/N = 3). The apparent Michaelis-Menten constant (K_m) was calculated to be 0.45 ± 0.02 mmol L⁻¹. Moreover, the modified electrode displayed a rapid response (5 s) to H₂O₂, and possessed good stability and reproducibility. Based on the composite film, a third-generation reagentless biosensor could be constructed for the determination of H₂O₂.     

A thermoelectric generator comprising selenium-doped bismuth telluride on flexible carbon cloth with n-type thermoelectric properties

Carbon cloth was used as a flexible substrate for bismuth telluride (Bi₂Te₃) particles to provide flexibility and improve the overall thermoelectric performance. Bi₂Te₃ on carbon cloth (Bi₂Te₃/CC) was synthesized via a hydrothermal reaction with various reaction times. After over 12 h, the Bi₂Te₃ particles showed a clear hexagonal shape and were evenly adhered to the carbon cloth. Selenium (Se) atoms were doped into the Bi₂Te₃ structure to improve its thermoelectric performance. The electrical conductivity increased with increasing Se-dopant content until 40% Se was added. Moreover, the maximum power factor was 1300 μW/mK² at 473 K for the 30% Se-doped sample. The carbon cloth substrate maintained its electrical resistivity and flexibility after 2000 bending cycles. A flexible thermoelectric generator (TEG) fabricated using the five pairs of 30% Se-doped sample showed an open-circuit voltage of 17.4 mV and maximum power output of 850 nW at temperature difference ΔT = 30 K. This work offers a promising approach for providing flexibility and improving the thermoelectric performance of inorganic thermoelectric materials for wearable device applications using flexible carbon cloth substrate for low temperature range application.     

Production of biodiesel from palm oil using liquid core lipase encapsulated in κ-carrageenan

This work deals with the enzymatic transesterification of palm oil with methanol in a solvent-free system. Among the five lipases tested in the initial screening, lipase PS from Burkholderia cepacia resulted in the highest triglyceride conversion. Lipase PS was further investigated in a novel immobilized form by encapsulating within a biopolymer, κ-carrageenan. Using the immobilized lipase the production parameters of biodiesel from palm oil were optimized. The optimal conditions for processing 10 g of palm oil was: 30 °C, 1:7 oil/methanol molar ratio, 1 g water, 5.25 g immobilized lipase, 72 h reaction time and 23.7g relative centrifugal force. At the optimal conditions, triglyceride conversion of up to 100% could be obtained. The immobilized lipase was stable and retained 82% relative transesterification activity after five cycles. Liquid core lipase encapsulated in κ-carrageenan could be a potential immobilized catalyst for eco-friendly production of biodiesel.     

Microbial desulphurization of coal containing pyritic sulphur in a continuously operated bench scale coal slurry reactor

Pre-combustion microbial desulphurization of coal containing total sulphur (3.90%) and pyritic sulphur (2.80%) has been evaluated in a coal slurry reactor. The coal slurry reactor operated at hydraulic retention time (HRT) of 96 h with a coal pulp density of 15 percent and remove 79 percent of pyritic sulphur and 76 percent of ash with an increase in the calorific value of coal from 4400 to 6800 kcal kg⁻¹ at a pyritic load of 1.9 kg pyritic sulphur kg⁻¹ MLSS d⁻¹. The treated coal yield is 72 percent. The biochemical kinetic coefficients, viz. yield coefficient (Y) and decay coefficient (K_d) in the coal slurry reactor system are 0.178 and 0.007 d⁻¹, respectively, while maximum growth rate (μ_max) and half saturation rate constant (K_s) are 0.025 h⁻¹ and 0.220 g l⁻¹ as pyrite, respectively.     

Modification of glassy carbon electrode with multi-walled carbon nanotubes and iron(III)-porphyrin film: Application to chlorate, bromate and iodate detection

In this study, multi-wall carbon nanotubes (MWCTs) is evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on iron-porphyrin. 5,10,15,20-Tetraphenyl-21H,23H-porphine iron(III) chloride (Fe(III)P) adsorbed on MWCNTs immobilized on the surface of glassy carbon electrode. Cyclic voltammograms of the Fe(III)P-incorporated-MWCNTs indicate a pair of well-defined and nearly reversible redox couple with surface confined characteristics at wide pH range (2-12). The surface coverage (Γ) and charge transfer rate constant (k_s) of Fe(III)P immobilized on MWCNTs were 7.68 × 10⁻⁹ mol cm⁻² and 1.8 s⁻¹, respectively, indicating high loading ability of MWCNTs for Fe(III)P and great facilitation of the electron transfer between Fe(III)P and carbon nanotubes immobilized on the electrode surface. Modified electrodes exhibit excellent electrocatalytic activity toward reduction of ClO₃⁻, IO₃⁻ and BrO₃⁻ in acidic solutions. The catalytic rate constants for catalytic reduction of bromate, chlorate and iodate were 6.8 × 10³, 7.4 × 10³ and 4.8 × 10² M⁻¹ s⁻¹, respectively. The hydrodynamic amperometry of rotating-modified electrode at constant potential versus reference electrode was used for detection of bromate, chlorate and iodate. The detection limit, linear calibration range and sensitivity for chlorate, bromate and iodate detections were 0.5 μM, 2 μM to 1 mM, 8.4 nA/μM, 0.6 μM, 2 μM to 0.15 mM, 11 nA/μM, and 2.5 μM, 10 μM to 4 mM and 1.5 nA/μM, respectively. Excellent electrochemical reversibility of the redox couple, good reproducibility, high stability, low detection limit, long life time, fast amperometric response time, wide linear concentration range, technical simplicity and possibility of rapid preparation are great advantages of this sensor. The obtained results show promising practical application of the Fe(III)P-MWCNTs-modified electrode as an amperometric sensor for chlorate, iodate and bromate detections.     

Enzyme kinetics of kinetic resolution of racemic ibuprofen ester using enzymatic membrane reactor

An ultrafiltration hollow fiber enzymatic membrane reactor was employed to study the kinetics of lipase-catalyzed kinetic resolution of racemic ibuprofen ester. Lipase from Candida rugosa was employed in the hydrolysis reaction both in free form in a batch system and in immobilized form in an enzymatic membrane reactor (EMR). The half life (t_1/2) of immobilized lipase on spongy layer was 105 h at reaction temperature of and 62 h at . This value was 94 h for lipase immobilized on the inner lumen and 45 h for free lipase in batch system at . Excessive substrate was found to inhibit the reaction as an uncompetitive inhibitor. The by-product 2-ethoxyethanol was found to be non-competitive inhibitor to the reaction when it was present in an excess. Michaelis constant (K_m) and maximum reaction rate (V_max) for immobilized lipase were and , respectively; and that for free lipase were and h^-1, respectively.     

Copper recovery and simultaneous COD removal from copper phthalocyanine dye effluent using bipolar disc reactor

Electrochemical treatment of real acidic effluent of copper phthalocyanine dye manufacturing plant with a view to explore the feasibility of the simultaneous removal of copper and phthalocyanine using a bipolar disc electrochemical reactor has been investigated. Experiments were conducted in a bipolar capillary gap disc stack electrochemical reactor under batch recirculation mode. Electrodes were RuO₂ and IrO₂ coated on titanium as anode and titanium as cathode. Effects of current density, electrolysis time and effluent flow rate on copper recovery and simultaneous COD removal and energy consumption were critically examined. The current density of 2.5 A dm⁻² and flow rate of 20 L h⁻¹ achieved 91.1% COD removal and 90.1% copper recovery with the energy consumption of 50.86 kWh kg⁻¹ for COD removal and simultaneous recovery of copper in a bipolar disc stack reactor.     

An electrochemical DNA biosensor developed on novel multinuclear nickel(II) salicylaldimine metallodendrimer platform

An electrochemical DNA biosensor (EDB) was prepared using an oligonucleotide of 21 bases with sequence NH₂-5′-GAGGAGTTGGGGGAGCACATT-3′ (probe DNA) immobilized on a novel multinuclear nickel(II) salicylaldimine metallodendrimer on glassy carbon electrode (GCE). The metallodendrimer was synthesized from amino functionalized polypropylene imine dendrimer, DAB-(NH₂)₈. The EDB was prepared by depositing probe DNA on a dendrimer-modified GCE surface and left to immobilize for 1 h. Voltammetric and electrochemical impedance spectroscopic (EIS) studies were carried out to characterize the novel metallodendrimer, the EDB and its hybridization response in PBS using [Fe(CN)₆]^3−/4− as a redox probe at pH 7.2. The metallodendrimer was electroactive in PBS with two reversible redox couples at E°′ = +200 mV and E°′ = +434 mV; catalytic by reducing the E_pa of [Fe(CN)₆]^3−/4− by 22 mV; conducting and has diffusion coefficient of 8.597 × 10⁻⁸ cm² s⁻¹. From the EIS circuit fitting results, the EDB responded to 5 nM target DNA by exhibiting a decrease in charge transfer resistance (R_ct) in PBS and increase in R_ct in [Fe(CN)₆]^3−/4− redox probe; while in voltammetry, increase in peak anodic current was observed in PBS after hybridization, thus giving the EDB a dual probe advantage.     

Lipase-catalyzed synthesis of poly-l-lactide using supercritical carbon dioxide

The present work shows that the enzyme mediated ring-opening polymerization of l-lactide at 65 °C can be achieved using supercritical carbon dioxide. It is reported a biphasic media system where the supercritical phase coexists with a liquid organic phase, which is mainly composed of melted monomer, wherein the growing poly-l-lactide chains are soluble. The immobilized lipase B from Candida antartica was used as the biocatalyst. The results indicated that semi-crystalline polymers with a molecular weight (M_w) up to 12,900 g mol⁻¹ can be attained and that the monomer conversion is related to the biocatalyst concentration and its initial water activity (a_wi). Experiments carried out with denatured enzyme gave no monomer conversion which confirms that the enzymatic mechanism is only involved in our system.     

Simulation of autohydrolysis effect on adsorptivity of wheat straw in the case of oil spill cleaning

This work deals with the use of chemically modified wheat straw as efficient low-cost adsorbent for combating oil-spills in aquatic environment. The autohydrolyzed wheat straw was produced from the corresponding raw material by autohydrolysis in a PARR batch reactor (autoclave) at 160–240 °C for 0–50 min isothermal reaction time (following a non-isothermal preheating period). Oil adsorbency tests were performed, using diesel and crude oil spills in freshwater and seawater. Diesel and crude oil adsorbency values were found to increase up to a maximum by intensifying the autohydrolysis conditions, i.e., time and temperature. The adsorbency values were estimated by a proposed novel model incorporating the autohydrolysis severity factor R₀. Optimal modification conditions were found for log R₀ = 5.15 (i.e., 200 °C, 10 min isothermal time period) giving diesel adsorbency up to 6.65 g g⁻¹ and crude oil adsorbency up to 6.91 g g⁻¹. The maximum adsorbency values were comparable to those of the commonly used commercial adsorbents.     

Hierarchical mesoporous nickel cobaltite nanoneedle/carbon cloth arrays as superior flexible electrodes for supercapacitors

Hierarchical mesoporous NiCo₂O₄ nanoneedle arrays on carbon cloth have been fabricated by a simple hydrothermal approach combined with a post-annealing treatment. Such unique array nanoarchitectures exhibit remarkable electrochemical performance with high capacitance and desirable cycle life at high rates. When evaluated as an electrode material for supercapacitors, the NiCo₂O₄ nanoneedle arrays supported on carbon cloth was able to deliver high specific capacitance of 660 F g^-1 at current densities of 2 A g^-1 in 2 M KOH aqueous solution. In addition, the composite electrode shows excellent mechanical behavior and long-term cyclic stability (91.8% capacitance retention after 3,000 cycles). The fabrication method presented here is facile, cost-effective, and scalable, which may open a new pathway for real device applications.     

Facile preparation of disposable immunosensor for Shigella flexneri based on multi-wall carbon nanotubes/chitosan composite

Based on multi-wall carbon nanotubes (MWCNT)/chitosan/horseradish peroxidase labeled antibodies to Shigella flexneri (HRP-anti-S. flexneri) biocomposite film on a screen-printed electrode (SPE) surface, a disposable immunosensor has been developed for the rapid detection of S. flexneri. The HRP-anti-S. flexneri can be entrapped into MWCNT/chitosan composite matrix without other cross-linking agent. Thionine and H₂O₂ were used as the mediator and substrate, respectively. The surface morphologies of modified films were characterized by atomic force microscope (AFM). Cyclic voltammery (CV) was carried out to characterize the electrochemical properties of the immobilization of materials on the electrode surface and quantified S. flexneri. Due to the strong electrocatalytic properties of MWCNT and HRP toward H₂O₂, the response signal was significantly amplified. S. flexneri could be detected by the decrease of the reduction peak current before and after immunoreaction. Under optimal conditions, S. flexneri could be detected in the range of 10⁴ to 10¹⁰ cfu mL⁻¹, with a detection limit of 2.3 × 10³ cfu mL⁻¹ (S/N = 3). Furthermore, the proposed immunosensor exhibited a satisfactory specificity, reproducibility, stability and accuracy, indicating that the proposed immunosensor has potential application for a facile, rapid and harmless immunoassay.     

Diffusional mass transfer model for the adsorption of food dyes on chitosan films

The adsorption kinetics of erythrosine B and indigo carmine on chitosan films was studied by a diffusional mass transfer model. The experimental curves were obtained in batch system under different conditions of stirring rate (80–200 rpm) and initial dye concentration (20–100 mg L⁻¹). For the model development, external mass transfer and intraparticle diffusion steps were considered and the specific simplifications were based on the system characteristics. The proposed diffusional mass transfer model agreed very well with the experimental curves, indicating that the surface diffusion was the rate limiting step. The external mass transfer coefficient (k_f) was dependent of the operating conditions and ranged from 1.32 × 10⁻⁴ to 2.17 × 10⁻⁴ m s⁻¹. The values of surface diffusion coefficient (D_s) increased with the initial dye concentration and were in the range from 0.41 × 10⁻¹⁴ to 22.90 × 10⁻¹⁴ m² s⁻¹. The Biot number ranged from 17.0 to 478.5, confirming that the intraparticle diffusion due to surface diffusion was the rate limiting step in the adsorption of erythrosine B and indigo carmine on chitosan films.     

Decoration of carbon cloth by manganese oxides for flexible asymmetric supercapacitors

Here we describe the production of carbon cloth coated with MnO₂ nanosheets or MnOOH nanorods through a normal temperature reaction or a hydrothermal approach, respectively. Of note, the electrochemical performance of MnO₂-coated carbon cloth was better (429.2 F g⁻¹) than that of MnOOH-coated carbon cloth. When the MnO₂-coated carbon cloth is introduced as the positive electrode and the Fe₂O₃-coated carbon cloth as the negative electrode, a flexible asymmetric supercapacitor was obtained with an energy density of 22.8 Wh kg⁻¹ and a power density of 159.4 W kg⁻¹. Therefore, such a hierarchical MnO₂-coated carbon cloth nanocomposite is a promising high-performance electrode for flexible supercapacitors.     

Electroenzymatic strategies for deracemization, stereoinversion and asymmetric synthesis of amino acids

A combination of a selective enzymatic oxidation with an unselective electrochemical reduction step was applied for deracemization, stereoinversion and asymmetric synthesis of l-leucine (starting from racemic leucine, d-leucine or 4-methyl-2-oxovaleric acid) in a batch reactor. d-Amino acid oxidase (d-AAO) from Trigonopsis variabilis was used as enzyme. Reaction conditions for the electrochemical and enzymatic reactions were investigated separately and finally combined to an electroenzymatic synthesis, yielding 3.5 mmol L⁻¹ d⁻¹ of l-leucine (ee 91%).     

Kinetic study of hydrogen sulfide absorption in aqueous chlorine solution

Hydrogen sulfide (H₂S) is currently removed from gaseous effluents by chemical scrubbing using water. Chlorine is a top-grade oxidant, reacting with H₂S with a fast kinetic rate and enhancing its mass transfer rate. To design, optimize and scale-up scrubbers, knowledge of the reaction kinetics and mechanism is requested. This study investigates the H₂S oxidation rate by reactive absorption in a mechanically agitated gas–liquid reactor. Mass transfer (gas and liquid sides mass transfer coefficients) and hydrodynamic (interfacial area) performances of the gas–liquid reactor were measured using appropriated physical or chemical absorption methods. The accuracy of these parameters was checked by modeling the H₂S absorption in water without oxidant. A sensitivity analysis confirmed the robustness of the model. Finally, reactive absorption of H₂S in chlorine solution for acidic or circumneutral pH allowed to investigate the kinetics of reaction. The overall oxidation mechanism could be described assuming that H₂S is oxidized irreversibly by both hypochlorite anion ClO⁻ (k = 6.75 × 10⁶ L mol⁻¹ s⁻¹) and hypochlorous acid ClOH (k = 1.62 × 10⁵ L mol⁻¹ s⁻¹).     

A third-generation hydrogen peroxide biosensor based on Horseradish Peroxidase (HRP) enzyme immobilized in a Nafion-Sonogel-Carbon composite

A third-generation biosensor based on HRP and a Sonogel-Carbon electrode has been fabricated with the aim of monitoring hydrogen peroxide in aqueous media via a direct electron transfer process. The redox activity of native HRP, typical of thin-layer electrochemistry, was observed. The charge coefficient transfer, α, and the heterogeneous electron transfer rate constant, k_s, were calculated to be 0.51 ± 0.04 and 1.29 ± 0.04 s⁻¹, respectively. Topographic study by atomic force microscopy (AFM) shows that the enzyme may have been introduced inside the ionic cluster of the Nafion. The immobilized HRP exhibited excellent electrocatalytical response to the reduction of H₂O₂ and preserved its native state after the immobilization stage. Several important experimental variables were optimized. The resulting biosensor showed a linear response to H₂O₂ over a concentration range from 4 to 100 μM, with a sensitivity of 12.8 nA/μM cm⁻² and a detection limit of 1.6 μM, calculated as (3 S.D./sensitivity). The apparent Michaelis-Menten constant was calculated to be 0.295 ± 0.020 mM. The biosensor showed high sensitivity as well as good stability and reproducibility. The performance of the biosensor was evaluated with respect to four possible interferences.