共查询到20条相似文献,搜索用时 78 毫秒
1.
引言
节能减排是国家“十一五”重点研究领域,它已经成为当今社会发展的重中之重,是推动人类社会发展的基石。建筑是可再生能源应用的重要领域,我国太阳能,浅层地能和生物能等资源十分丰富.在建筑用能中应用前景广泛。 相似文献
2.
项目介绍
“十一五“期间.常州天合光能有限公司办公楼被列为国家科技支撑计划可再生能源与建筑集成技术示范工程,该项目位于常州高新技术开发区常州市光能工程技术中心厂区内, 相似文献
3.
上海交通大学中一意绿色能源实验室(Green Building Laboratory)将于2009年底在上海交通大学闵行校区落成。本文对该项目应用的模拟校核和主动节能技术进行了简要介绍,并对近年来发展较为迅速的几种典型建筑能源系统进行了分析,重点对将应用于绿色能源实验室的代表性技术进行了讨论。 相似文献
4.
在太阳能应用中,太阳能制热水和太阳能采暖是两种发展较为普遍的应用形式。但这两类传统太阳能应用形式仍然存在的一些不足,制约了其进一步的发展和推广。 相似文献
5.
在现代建筑中,窗户已经称为室内热负荷的重要来源。国内外的学者对各种气候条件下的不同窗户结构节能效率做了大量研究.H.Manz,Faggembauu等[1-2]研究了各种结构的双层玻璃幕墙并发展了热流动模型来研究其性能。 相似文献
6.
长期以来,北方地区采暖以燃煤为主.对城市环境造成了较大的污染。而太阳能作为一种清洁的可再生能源.分布范围广,取之不尽,用之不竭。 相似文献
7.
肖强 《建设科技(建设部)》2009,(24):70-73
2009年12月7日,192个国家的环境部长在哥本哈根召开联合国气候会议,就未来应对气候变化的全球行动签署新的游议。我国政府日前宣布,到2020年我国单位国内生产总值二氧化碳排放比2005年下降40%-45%的目标。 相似文献
8.
季杰 《建设科技(建设部)》2009,(24):40-42
课题总目标
本课题的总目标是围绕太阳能集热模块与建筑围护结构的一体化及同寿命问题进行攻关,以太阳能空气集热模块和基于空气集热、热压通风原理的被动采暖,降温模块及技术研究为主.使建筑模块的集热性能在符合国家集热器相关标准的前提下.满足新建或既有建筑围护结构的各项性能指标. 相似文献
9.
宋凌 《建设科技(建设部)》2009,(24):19-20
项目总目标“十一五”国家科技支撑计划项目“可再生能源与建筑集成示范与研究”.针对民用建筑中可再生能源的应用需求,研究主、被动式设计的重点单元技术、现有先进成熟的可再生能源技术之间的耦合技术和可再生能源系统与建筑之间的接口技术, 相似文献
10.
空气湿度是一个与人们生活和生产有密切关系的重要环境参数,湿度对人体舒适度、产品生产、产品质量和产品保存期都有重要意义。人长期在潮湿的空气环境里生活和工作.身体会受到“湿”的侵袭,人体的热平衡被破坏, 相似文献
11.
尚德公司联合澳大利亚驻上海总领事馆、北京市建筑设计研究院、澳大利亚PTW建筑设计顾问(上海)有限公司共同举办的“2005中国(无锡)绿色建筑,光伏技术(BIPV)高层论坛暨尚德第三届太阳能光伏产品技术交流会”于2005年1月13、14日在无锡隆重召开。它不仅在于介绍光伏建筑一体化技术的现状与发展. 相似文献
12.
13.
14.
利用垂直轴微风发电技术,研发了微风电与光伏相结合的分布式发电系统,实现了昼夜不间断发电。垂直轴微风发电比水平轴风力发电系统,具有风力资源利用率高,年发电量多等优点。本文对分布式发电系统不同配置及适用范围进行了论述,为风力资源属于低风速的区域提供了一种可再生能源利用的新技术,尤其适合无电人口地区推广应用。 相似文献
15.
简要介绍了太阳能光电转换的原理及优点,针对当前太阳能光伏发电上网难的现象,从成本、可控性、可调性等方面分析其原因,提出了光伏发电产业的发展对策并作了具体阐述,以促进能源可持续发展战略的顺利实施。 相似文献
16.
17.
18.
19.
Afshan Ilyas Mohammad Ayyub M. Rizwan Khan Abhinandan Jain Mohammed Aslam Husain 《国际自然能源杂志》2018,39(8):873-884
This paper presents the modelling, simulation and hardware implementation of the incremental conductance (INC) maximum power point tracking (MPPT) algorithm. The extraction of maximum power from the solar photovoltaic system was made by integrating the PV module with a DC–DC converter and utilising the MPPT algorithm. In this work, the INC MPPT algorithm is practically implemented on an Arduino Uno board to track the maximum power point (MPP) and also simulated in Matlab/Simulink under the same environmental conditions. The performance of the INC algorithm was also compared with the conventional Perturb and Observe (P&O) MPPT algorithm. The experimental and simulation results are provided for both MPPT techniques. Matlab/Simulink was used for simulation studies. 相似文献
20.
Mohamed Louzazni Ahmed Khouya Khalid Amechnoue Marco Mussetta Aurelian Crăciunescu 《国际自然能源杂志》2020,41(13):1482-1494
ABSTRACT Recently, the extraction of photovoltaic parameters was the subject of intensive debate in the scienti?c literature. This paper presents an analysis and comparison of the use of the statistical errors in extraction of single and double diodes of the solar cell and photovoltaic module parameters. The compared errors are based on the utilisation of the firefly algorithm. The objective function used is adapted to minimise the absolute errors between the experimental and predicted current values. Two technologies of the solar cell are used to compare; a mono-crystalline silicon solar cell and the polycrystalline silicon photovoltaic module with 36 cells connected in series. The performance of the extracted parameters and current is compared with recent algorithms and techniques. The analysis and comparison of commonly used error measure help in evaluating the predictive ability of parameters extraction. The comparisons demonstrate that the firefly algorithm in statistical errors measure provides high performance and accuracy of the extracted parameters. 相似文献