Recent progress in efficient hybrid lead halide perovskite solar cells

The efficiency of perovskite solar cells (PSCs) has been improved from 9.7 to 19.3%, with the highest value of 20.1% achieved in 2014. Such a high photovoltaic performance can be attributed to optically high absorption characteristics and balanced charge transport properties with long diffusion lengths of the hybrid lead halide perovskite materials. In this review, some fundamental details of hybrid lead iodide perovskite materials, various fabrication techniques and device structures are described, aiming for a better understanding of these materials and thus highly efficient PSC devices. In addition, some advantages and open issues are discussed here to outline the prospects and challenges of using perovskites in commercial photovoltaic devices.     

Recent progress in efficient hybrid lead halide perovskite solar cells

Abstract

The efficiency of perovskite solar cells (PSCs) has been improved from 9.7 to 19.3%, with the highest value of 20.1% achieved in 2014. Such a high photovoltaic performance can be attributed to optically high absorption characteristics and balanced charge transport properties with long diffusion lengths of the hybrid lead halide perovskite materials. In this review, some fundamental details of hybrid lead iodide perovskite materials, various fabrication techniques and device structures are described, aiming for a better understanding of these materials and thus highly efficient PSC devices. In addition, some advantages and open issues are discussed here to outline the prospects and challenges of using perovskites in commercial photovoltaic devices.     

Infrared Solution‐Processed Quantum Dot Solar Cells Reaching External Quantum Efficiency of 80% at 1.35 µm and Jsc in Excess of 34 mA cm−2

Developing low‐cost photovoltaic absorbers that can harvest the short‐wave infrared (SWIR) part of the solar spectrum, which remains unharnessed by current Si‐based and perovskite photovoltaic technologies, is a prerequisite for making high‐efficiency, low‐cost tandem solar cells. Here, infrared PbS colloidal quantum dot (CQD) solar cells employing a hybrid inorganic–organic ligand exchange process that results in an external quantum efficiency of 80% at 1.35 µm are reported, leading to a short‐circuit current density of 34 mA cm^?2 and a power conversion efficiency (PCE) up to 7.9%, which is a current record for SWIR CQD solar cells. When this cell is placed at the back of an MAPbI₃ perovskite film, it delivers an extra 3.3% PCE by harnessing light beyond 750 nm.     

Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering

Solution‐processed perovskite (PSC) solar cells have achieved extremely high power conversion efficiencies (PCEs) over 20%, but practical application of this photovoltaic technology requires further advancements on both long‐term stability and large‐area device demonstration. Here, an additive‐engineering strategy is developed to realize a facile and convenient fabrication method of large‐area uniform perovskite films composed of large crystal size and low density of defects. The high crystalline quality of the perovskite is found to simultaneously enhance the PCE and the durability of PSCs. By using the simple and widely used methylammonium lead iodide (MAPbI₃), a certified PCE of 19.19% is achieved for devices with an aperture area of 1.025 cm², and the high‐performing devices can sustain over 80% of the initial PCE after 500 h of thermal aging at 85 °C, which are among the best results of MAPbI₃‐based PSCs so far.     

Ultraflexible and Lightweight Bamboo‐Derived Transparent Electrodes for Perovskite Solar Cells

Wearable devices are mainly based on plastic substrates, such as polyethylene terephthalate and polyethylene naphthalate, which causes environmental pollution after use due to the long decomposition periods. This work reports on the fabrication of a biodegradable and biocompatible transparent conductive electrode derived from bamboo for flexible perovskite solar cells. The conductive bioelectrode exhibits extremely flexible and light‐weight properties. After bending 3000 times at a 4 mm curvature radius or even undergoing a crumpling test, it still shows excellent electrical performance and negligible decay. The performance of the bamboo‐based bioelectrode perovskite solar cell exhibits a record power conversion efficiency (PCE) of 11.68%, showing the highest efficiency among all reported biomass‐based perovskite solar cells. It is remarkable that this flexible device has a highly bendable mechanical stability, maintaining over 70% of its original PCE during 1000 bending cycles at a 4 mm curvature radius. This work paves the way for perovskite solar cells toward comfortable and environmentally friendly wearable devices.     

Methodologies toward Highly Efficient Perovskite Solar Cells

A perovskite solar cell (PSC) employing an organic–inorganic lead halide perovskite light harvester, seeded in 2009 with power conversion efficiency (PCE) of 3.8% and grown in 2011 with PCE of 6.5% in dye‐sensitized solar cell structure, has received great attention since the breakthrough reports ≈10% efficient solid‐state PCSs demonstrating 500 h stability. Developments of device layout and high‐quality perovskite film eventually lead to a PCE over 22%. As of October 31, 2017, the highest PCE of 22.7% is listed in an efficiency chart provided by NREL. In this Review, the methodologies to obtain highly efficient PSCs are described in detail. In order to achieve a PCE of over 20% reproducibly, key technologies are disclosed from the viewpoint of precursor solution chemistry, processing for defect‐free perovskite films, and passivation of grain boundaries. Understanding chemical species in precursor solution, crystal growth kinetics, light–matter interaction, and controlling defects is expected to give important insights into not only reproducible production of high PCE over 20% but also further enhancement of the PCE of PCSs.     

Goethite Quantum Dots as Multifunctional Additives for Highly Efficient and Stable Perovskite Solar Cells

Minimization of defects and ion migration in organic–inorganic lead halide perovskite films is desirable for obtaining photovoltaic devices with high power conversion efficiency (PCE) and long‐term stability. However, achieving this target is still a challenge due to the lack of efficient multifunctional passivators. Herein, to address this issue, n‐type goethite (FeOOH) quantum dots (QDs) are introduced into the perovskite light‐absorption layer for achieving efficient and stable perovskite solar cells (PSCs). It is found that the iron, oxygen, and hydroxyl of FeOOH QDs can interact with iodine, lead, and methylamine, respectively. As a result, the crystallization kinetics process can be retarded, thereby resulting in high quality perovskite films with large grain size. Meanwhile, the trap states of perovskite can be effectively passivated via interaction with the under‐coordinated metal (Pb) cations, halide (I) anions on the perovskite crystal surface. Consequently, the PSCs with FeOOH QDs achieve a high efficiency close to 20% with negligible hysteresis. Most strikingly, the long‐term stability of PSCs is significantly enhanced. Furthermore, compared with the CH₃NH₃PbI₃‐based device, a higher PCE of 21.0% is achieved for the device assembled with a Cs_0.05FA_0.81MA_0.14PbBr_0.45I_2.55 perovskite layer.     

Amide‐Catalyzed Phase‐Selective Crystallization Reduces Defect Density in Wide‐Bandgap Perovskites

Wide‐bandgap (WBG) formamidinium–cesium (FA‐Cs) lead iodide–bromide mixed perovskites are promising materials for front cells well‐matched with crystalline silicon to form tandem solar cells. They offer avenues to augment the performance of widely deployed commercial solar cells. However, phase instability, high open‐circuit voltage (V_oc) deficit, and large hysteresis limit this otherwise promising technology. Here, by controlling the crystallization of FA‐Cs WBG perovskite with the aid of a formamide cosolvent, light‐induced phase segregation and hysteresis in perovskite solar cells are suppressed. The highly polar solvent additive formamide induces direct formation of the black perovskite phase, bypassing the yellow phases, thereby reducing the density of defects in films. As a result, the optimized WBG perovskite solar cells (PSCs) (E_g ≈ 1.75 eV) exhibit a high V_oc of 1.23 V, reduced hysteresis, and a power conversion efficiency (PCE) of 17.8%. A PCE of 15.2% on 1.1 cm² solar cells, the highest among the reported efficiencies for large‐area PSCs having this bandgap is also demonstrated. These perovskites show excellent phase stability and thermal stability, as well as long‐term air stability. They maintain ≈95% of their initial PCE after 1300 h of storage in dry air without encapsulation.     

高效率双结钙钛矿叠层太阳能电池研究进展

以钙钛矿电池为顶电池的叠层太阳电池发展迅速,成为太阳能光伏领域的研究热点之一。随着电池结构和制备工艺的优化,叠层电池的光电转换效率快速提升,单片钙钛矿/晶硅叠层电池的效率已达到31.3%。本综述对近年来以宽带隙钙钛矿电池作为顶子电池、晶体硅电池及其他新型中窄带隙电池(钙钛矿电池、有机电池、铜铟镓硒(CIGS)电池)作为底子电池的叠层电池的研究进展进行了系统梳理,总结了叠层电池的顶电池、中间互联层和底电池的材料、结构及光电性能等方面的关键技术及难点,希望能够为进一步提升叠层电池效率提供一些思路。并对未来低成本高效叠层太阳能电池的光学和电学优化需求做出了分析与展望。     

Realizing Stable Artificial Photon Energy Harvesting Based on Perovskite Solar Cells for Diverse Applications

As the fastest developing photovoltaic device, perovskite solar cells have achieved an extraordinary power conversion efficiency (PCE) of 25.3% under AM 1.5 illumination. However, few studies have been devoted to perovskite solar cells harvesting artificial light, owing to the great challenge in the simultaneous manipulation of bandgap‐adjustable perovskite materials, corresponding matched energy band structure of carrier transport materials, and interfacial defects. Herein, through systematic morphology, composition, and energy band engineering, high‐quality Cs_0.05MA_0.95PbBr_xI_3?x perovskite as the light absorber and Nb_yTi_1?yO₂ (Nb:TiO₂) as the electron transport material with an ideal energy band alignment are obtained simultaneously. The theoretical‐limit‐approaching record PCEs of 36.3% (average: 34.0 ± 1.2%) under light‐emitting diode (LED, warm white) and 33.2% under fluorescent lamp (cold white) are achieved simultaneously, as well as a PCE of 19.5% (average: 18.9 ± 0.3%) under solar illumination. An integrated energy conversion and storage system based on an artificial light response solar cell and sodium‐ion battery is established for diverse practical applications, including a portable calculator, quartz clock, and even environmental monitoring equipment. Over a week of stable operation shows its great practical potential and provides a new avenue to promote the commercialization of perovskite photovoltaic devices via integration with ingenious electronic devices.     

A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency

Organic solar cells (OSCs) can be unstable under ultraviolet (UV) irradiation. To address this issue and enhance the power conversion efficiency (PCE), an inorganic‐perovskite/organic four‐terminal tandem solar cell (TSC) based on a semitransparent inorganic CsPbBr₃ perovskite solar cell (pero‐SC) as the top cell and an OSC as bottom cell is constructed. The high‐quality CsPbBr₃ photoactive layer of the planar pero‐SC is prepared with a dual‐source vacuum coevaporation method, using stoichiometric precursors of CsBr and PbBr₂ with a low evaporation rate. The resultant opaque planar pero‐SC exhibits an ultrahigh open‐circuit voltage of 1.44 V and the highest reported PCE of 7.78% for a CsPbBr₃‐based planar pero‐SC. Importantly, the devices show no degradation after 120 h UV light illumination. The related semitransparent pero‐SC can almost completely filter UV light and well maintain photovoltaic performance; it additionally shows an extremely high average visible transmittance. When it is used to construct a TSC, the top pero‐SC acting as a UV filter can utilize UV light for photoelectric conversion, avoiding the instability problem of UV light on the bottom OSC that can meet the industrial standards of UV‐light stability for solar cells, and leading to the highest reported PCE of 14.03% for the inorganic‐perovskite/organic TSC.     

Defect and Contact Passivation for Perovskite Solar Cells

Metal‐halide perovskites are rapidly emerging as an important class of photovoltaic absorbers that may enable high‐performance solar cells at affordable cost. Thanks to the appealing optoelectronic properties of these materials, tremendous progress has been reported in the last few years in terms of power conversion efficiencies (PCE) of perovskite solar cells (PSCs), now with record values in excess of 24%. Nevertheless, the crystalline lattice of perovskites often includes defects, such as interstitials, vacancies, and impurities; at the grain boundaries and surfaces, dangling bonds can also be present, which all contribute to nonradiative recombination of photo‐carriers. On device level, such recombination undesirably inflates the open‐circuit voltage deficit, acting thus as a significant roadblock toward the theoretical efficiency limit of 30%. Herein, the focus is on the origin of the various voltage‐limiting mechanisms in PSCs, and possible mitigation strategies are discussed. Contact passivation schemes and the effect of such methods on the reduction of hysteresis are described. Furthermore, several strategies that demonstrate how passivating contacts can increase the stability of PSCs are elucidated. Finally, the remaining key challenges in contact design are prioritized and an outlook on how passivating contacts will contribute to further the progress toward market readiness of high‐efficiency PSCs is presented.     

Polymer‐Passivated Inorganic Cesium Lead Mixed‐Halide Perovskites for Stable and Efficient Solar Cells with High Open‐Circuit Voltage over 1.3 V

Cesium‐based trihalide perovskites have been demonstrated as promising light absorbers for photovoltaic applications due to their superb composition stability. However, the large energy losses (E_loss) observed in inorganic perovskite solar cells has become a major hindrance impairing the ultimate efficiency. Here, an effective and reproducible method of modifying the interface between a CsPbI₂Br absorber and polythiophene hole‐acceptor to minimize the E_loss is reported. It is demonstrated that polythiophene, deposited on the top of CsPbI₂Br, can significantly reduce electron‐hole recombination within the perovskite, which is due to the electronic passivation of surface defect states. In addition, the interfacial properties are improved by a simple annealing process, leading to significantly reduced energy disorder in polythiophene and enhanced hole‐injection into the hole‐acceptor. Consequently, one of the highest power conversion efficiency (PCE) of 12.02% from a reverse scan in inorganic mixed‐halide perovskite solar cells is obtained. Modifying the perovskite films with annealing polythiophene enables an open‐circuit voltage (V_OC) of up to 1.32 V and E_loss of down to 0.5 eV, which both are the optimal values reported among cesium‐lead mixed‐halide perovskite solar cells to date. This method provides a new route to further improve the efficiency of perovskite solar cells by minimizing the E_loss.     

Perovskite Solar Cells with Inorganic Electron‐ and Hole‐Transport Layers Exhibiting Long‐Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air

Despite the high power conversion efficiency (PCE) of perovskite solar cells (PSCs), poor long‐term stability is one of the main obstacles preventing their commercialization. Several approaches to enhance the stability of PSCs have been proposed. However, an accelerating stability test of PSCs at high temperature under the operating conditions in ambient air remains still to be demonstrated. Herein, interface‐engineered stable PSCs with inorganic charge‐transport layers are shown. The highly conductive Al‐doped ZnO films act as efficient electron‐transporting layers as well as dense passivation layers. This layer prevents underneath perovskite from moisture contact, evaporation of components, and reaction with a metal electrode. Finally, inverted‐type PSCs with inorganic charge‐transport layers exhibit a PCE of 18.45% and retain 86.7% of the initial efficiency for 500 h under continuous 1 Sun illumination at 85 °C in ambient air with electrical biases (at maximum power point tracking).     

Efficient Perovskite Solar Cells Fabricated Through CsCl‐Enhanced PbI2 Precursor via Sequential Deposition

The fabrication of high‐quality perovskite film highly relies on chemical composition and the synthesis method of perovskite. So far, sequentially deposited MA_0.03FA_0.97Pb(I_0.97Br_0.03)₃ polycrystalline film is adopted to produce high‐performance perovskite solar cells with record power conversion efficiency (PCE). Fewer grain boundaries and incorporation of inorganic cation (e.g., cesium) would further increase device performance via sequential deposition. Here, cesium chloride (CsCl) is introduced into lead iodide (PbI₂) precursor solution that beneficially modulates the property of PbI₂ film, leading to larger grains with cesium incorporation in the resulting perovskite film. The enlarged crystal grains originate from a slower nucleation process for CsCl‐containing PbI₂ film when reacting with formamidine iodide, confirmed by in situ confocal photoluminescence imaging. Photovoltaic devices based on CsCl‐containing PbI₂ film demonstrate a higher averaging efficiency of 21.3% than 20.3% of the devices without CsCl additives for reverse scan. More importantly, the device stability is improved by CsCl additives that retain over 90% of their initial PCE value after 4000 min tracking at maximum power point under 1‐sun illumination. This work paves a way to further improve the photovoltaic performance of mixed‐cation‐halide perovskite solar cells via a sequential deposition method.     

Low‐Temperature Soft‐Cover Deposition of Uniform Large‐Scale Perovskite Films for High‐Performance Solar Cells

Large‐scale high‐quality perovskite thin films are crucial to produce high‐performance perovskite solar cells. However, for perovskite films fabricated by solvent‐rich processes, film uniformity can be prevented by convection during thermal evaporation of the solvent. Here, a scalable low‐temperature soft‐cover deposition (LT‐SCD) method is presented, where the thermal convection‐induced defects in perovskite films are eliminated through a strategy of surface tension relaxation. Compact, homogeneous, and convection‐induced‐defects‐free perovskite films are obtained on an area of 12 cm², which enables a power conversion efficiency (PCE) of 15.5% on a solar cell with an area of 5 cm². This is the highest efficiency at this large cell area. A PCE of 15.3% is also obtained on a flexible perovskite solar cell deposited on the polyethylene terephthalate substrate owing to the advantage of presented low‐temperature processing. Hence, the present LT‐SCD technology provides a new non‐spin‐coating route to the deposition of large‐area uniform perovskite films for both rigid and flexible perovskite devices.     

Fine Multi‐Phase Alignments in 2D Perovskite Solar Cells with Efficiency over 17% via Slow Post‐Annealing

Layered Ruddlesden–Popper (RP) phase (2D) halide perovskites have attracted tremendous attention due to the wide tunability on their optoelectronic properties and excellent robustness in photovoltaic devices. However, charge extraction/transport and ultimate power conversion efficiency (PCE) in 2D perovskite solar cells (PSCs) are still limited by the non‐eliminable quantum well effect. Here, a slow post‐annealing (SPA) process is proposed for BA₂MA₃Pb₄I₁₃ (n = 4) 2D PSCs by which a champion PCE of 17.26% is achieved with simultaneously enhanced open‐circuit voltage, short‐circuit current, and fill factor. Investigation with optical spectroscopy coupled with structural analyses indicates that enhanced crystal orientation and favorable alignment on the multiple perovskite phases (from the 2D phase near bottom to quasi‐3D phase near top regions) is obtained with SPA treatment, which promotes carrier transport/extraction and suppresses Shockley–Read–Hall charge recombination in the solar cell. As far as it is known, the reported PCE is so far the highest efficiency in RP phase 2D PSCs based on butylamine (BA) spacers (n = 4). The SPA‐processed devices exhibit a satisfactory stability with <4.5% degradation after 2000 h under N₂ environment without encapsulation. The demonstrated process strategy offers a promising route to push forward the performance in 2D PSCs toward realistic photovoltaic applications.     

Causes and Solutions of Recombination in Perovskite Solar Cells

Organic–inorganic hybrid perovskite materials are receiving increasing attention and becoming star materials on account of their unique and intriguing optical and electrical properties, such as high molar extinction coefficient, wide absorption spectrum, low excitonic binding energy, ambipolar carrier transport property, long carrier diffusion length, and high defects tolerance. Although a high power conversion efficiency (PCE) of up to 22.7% is certified for perovskite solar cells (PSCs), it is still far from the theoretical Shockley–Queisser limit efficiency (30.5%). Obviously, trap‐assisted nonradiative (also called Shockley–Read–Hall, SRH) recombination in perovskite films and interface recombination should be mainly responsible for the above efficiency distance. Here, recent research advancements in suppressing bulk SRH recombination and interface recombination are systematically investigated. For reducing SRH recombination in the films, engineering perovskite composition, additives, dimensionality, grain orientation, nonstoichiometric approach, precursor solution, and post‐treatment are explored. The focus herein is on the recombination at perovskite/electron‐transporting material and perovskite/hole‐transporting material interfaces in normal or inverted PSCs. Strategies for suppressing bulk and interface recombination are described. Additionally, the effect of trap‐assisted nonradiative recombination on hysteresis and stability of PSCs is discussed. Finally, possible solutions and reasonable prospects for suppressing recombination losses are presented.     

基于印刷技术制备钙钛矿太阳电池

近年来,钙钛矿太阳电池(Perovskite solar cells,PSCs)以其优异的光电转换性能和溶液制备成本低等优势受到了科研工作者和产业界人士的广泛关注,被认为是新一代薄膜太阳电池技术中的杰出代表.目前,钙钛矿太阳电池的光电转换效率(Power conversion efficiency,PCE)已经从2009年报道的3.8%迅速提升到现在的22.7%,达到商业化多晶硅、碲化镉、铜铟镓硒等太阳电池水平.目前,溶液旋涂法是实验室制备钙钛矿太阳电池的常用方法.虽然旋涂法操作简单、成膜速度快、重复性好,然而该法缺点也很明显:(1)材料浪费严重;(2)不具备图案化功能;(3)不适用于工业化的连续生产.因此,溶液旋涂技术无法满足钙钛矿太阳电池今后大规模工业化生产所需的大面积、低成本等制造要求.从实验室小面积器件制备转变到可大面积的产业化制备以及降低钙钛矿太阳电池的生产成本,将是钙钛矿太阳电池产业化过程中的一个重要课题.在钙钛矿太阳电池的制备方法中,印刷技术因具有材料利用率高、成本低、工艺效率高、可大面积制备、适用于柔性基底等特点而备受关注.基于印刷工艺制备的小面积钙钛矿太阳电池效率已接近20%,大面积(>10 cm2)钙钛矿太阳电池效率在10%~16%之间,大面积柔性钙钛矿太阳电池效率为10%左右.然而,从实验室小器件转变到大规模工业化生产依旧存在许多问题亟待解决.例如:(1)为了加快钙钛矿材料的结晶,在钙钛矿薄膜退火过程中通常采用溶剂工程或惰性气体辅助的方式,这将导致印刷的大面积钙钛矿薄膜质量难以控制以及重复性降低;(2)退火过程中较高的退火温度会限制柔性基底和界面材料的选择;(3)钙钛矿材料本身对空气湿度敏感,需提高钙钛矿层制备过程的环境适应性,降低制备工艺本身对环境条件的限制等.基于此,完善钙钛矿太阳电池的印刷制备工艺并使其适用于工业化生产显得十分重要.本文综述了基于喷墨打印(Inkj et-printing)、喷涂(Spray-coating)、狭缝涂布(Slot-die coating)、刮涂(Doctor-blading)等印刷技术制备钙钛矿太阳电池的研究进展,并对印刷技术制备钙钛矿太阳电池的前景进行了展望.     

Perovskite solar cells: must lead be replaced – and can it be done?

Perovskite solar cells have recently drawn significant attention for photovoltaic applications with a certified power conversion efficiency of more than 22%. Unfortunately, the toxicity of the dissolvable lead content in these materials presents a critical concern for future commercial development. This review outlines some criteria for the possible replacement of lead by less toxic elements, and highlights current research progress in the application of low-lead halide perovskites as optically active materials in solar cells. These criteria are discussed with the aim of developing a better understanding of the physio-chemical properties of perovskites and of realizing similar photovoltaic performance in perovskite materials either with or without lead. Some open questions and future development prospects are outlined for further advancing perovskite solar cells toward both low toxicity and high efficiency.