“Multipoint Force Feedback” Leveling of Massively Parallel Tip Arrays in Scanning Probe Lithography

Nanoscale patterning with massively parallel 2D array tips is of significant interest in scanning probe lithography. A challenging task for tip‐based large area nanolithography is maintaining parallel tip arrays at the same contact point with a sample substrate in order to pattern a uniform array. Here, polymer pen lithography is demonstrated with a novel leveling method to account for the magnitude and direction of the total applied force of tip arrays by a multipoint force sensing structure integrated into the tip holder. This high‐precision approach results in a 0.001° slope of feature edge length variation over 1 cm wide tip arrays. The position sensitive leveling operates in a fully automated manner and is applicable to recently developed scanning probe lithography techniques of various kinds which can enable “desktop nanofabrication.”     

Interdigitated Multicolored Bioink Micropatterns by Multiplexed Polymer Pen Lithography

Multiplexing, i.e., the application and integration of more than one ink in an interdigitated microscale pattern, is still a challenge for microcontact printing (μCP) and similar techniques. On the other hand there is a strong demand for interdigitated patterns of more than one protein on subcellular to cellular length scales in the lower micrometer range in biological experiments. Here, a new integrative approach is presented for the fabrication of bioactive microarrays and complex multi‐ink patterns by polymer pen lithography (PPL). By taking advantage of the strength of microcontact printing (μCP) combined with the spatial control and capability of precise repetition of PPL in an innovative way, a new inking and writing strategy is introduced for PPL that enables true multiplexing within each repetitive subpattern. Furthermore, a specific ink/substrate platform is demonstrated that can be used to immobilize functional proteins and other bioactive compounds over a biotin–streptavidin approach. This patterning strategy aims specifically at application by cell biologists and biochemists addressing a wide range of relevant pattern sizes, easy pattern generation and adjustment, the use of only biofriendly, nontoxic chemicals, and mild processing conditions during the patterning steps. The retained bioactivity of the fabricated cm² area filling multiprotein patterns is demonstrated by showing the interaction of fibroblasts and neurons with multiplexed structures of fibronectin and laminin or laminin and ephrin, respectively.     

Negative‐Tone Block Copolymer Lithography by In Situ Surface Chemical Modification

Negative‐tone block copolymer (BCP) lithography based on in situ surface chemical modification is introduced as a highly efficient, versatile self‐assembled nanopatterning. BCP blends films consisting of end‐functionalized low molecular weight poly(styrene‐ran‐methyl methacrylate) and polystyrene‐block‐Poly(methyl methacylate) can produce surface vertical BCP nanodomains on various substrates without prior surface chemical treatment. Simple oxygen plasma treatment is employed to activate surface functional group formation at various substrates, where the end‐functionalized polymers can be covalently bonded during the thermal annealing of BCP thin films. The covalently bonded brush layer mediates neutral interfacial condition for vertical BCP nanodomain alignment. This straightforward approach for high aspect ratio, vertical self‐assembled nanodomain formation facilitates single step, site‐specific BCP nanopatterning widely useful for various substrates. Moreover, this approach is compatible with directed self‐assembly approaches to produce device oriented laterally ordered nanopatterns.     

Colloidal Self‐Assembly Meets Nanofabrication: From Two‐Dimensional Colloidal Crystals to Nanostructure Arrays

Self‐assembly of colloidal microspheres or nanospheres is an effective strategy for fabrication of ordered nanostructures. By combination of colloidal self‐assembly with nanofabrication techniques, two‐dimensional (2D) colloidal crystals have been employed as masks or templates for evaporation, deposition, etching, and imprinting, etc. These methods are defined as “colloidal lithography”, which is now recognized as a facile, inexpensive, and repeatable nanofabrication technique. This paper presents an overview of 2D colloidal crystals and nanostructure arrays fabricated by colloidal lithography. First, different methods for fabricating self‐assembled 2D colloidal crystals and complex 2D colloidal crystal structures are summarized. After that, according to the nanofabrication strategy employed in colloidal lithography, related works are reviewed as colloidal‐crystal‐assisted evaporation, deposition, etching, imprinting, and dewetting, respectively.     

Biochips for Cell Biology by Combined Dip‐Pen Nanolithography and DNA‐Directed Protein Immobilization

A general methodology for patterning of multiple protein ligands with lateral dimensions below those of single cells is described. It employs dip pen nanolithography (DPN) patterning of DNA oligonucleotides which are then used as capture strands for DNA‐directed immobilization (DDI) of oligonucleotide‐tagged proteins. This study reports the development and optimization of PEG‐based liquid ink, used as carrier for the immobilization of alkylamino‐labeled DNA oligomers on chemically activated glass surfaces. The resulting DNA arrays have typical spot sizes of 4–5 μm with a pitch of 12 μm micrometer. It is demonstrated that the arrays can be further functionalized with covalent DNA‐streptavidin (DNA‐STV) conjugates bearing ligands recognized by cells. To this end, biotinylated epidermal growth factor (EGF) is coupled to the DNA‐STV conjugates, the resulting constructs are hybridized with the DNA arrays and the resulting surfaces used for the culturing of MCF‐7 (human breast adenocarcinoma) cells. Owing to the lateral diffusion of transmembrane proteins in the cell's plasma membrane, specific recruitment and concentration of EGF receptor can be induced specifically at the sites where the ligands are bound on the solid substrate. This is a clear demonstration that this method is suitable for precise functional manipulations of subcellular areas within living cells.