Design of High‐Mobility Diketopyrrolopyrrole‐Based π‐Conjugated Copolymers for Organic Thin‐Film Transistors

Since the report of the first diketopyrrolopyrrole (DPP)‐based polymer semiconductor, such polymers have received considerable attention as a promising candidate for high‐performance polymer semiconductors in organic thin‐film transistors (OTFTs). This Progress Report summarizes the advances in the molecular design of high‐mobility DPP‐based polymers reported in the last few years, especially focusing on the molecular design of these polymers in respect of tuning the backbone and side chains, and discussing the influences of structural modification of the backbone and side chains on the properties and device performance of corresponding DPP‐based polymers. This provides insights for the development of new and high‐mobility polymer semiconductors.     

Solvent Effects on Polymer Sorting of Carbon Nanotubes with Applications in Printed Electronics

Regioregular poly(3‐alkylthiophene) (P3AT) polymers have been previously reported for the selective, high‐yield dispersion of semiconducting single‐walled carbon nanotubes (SWCNTs) in toluene. Here, five alternative solvents are investigated, namely, tetrahydrofuran, decalin, tetralin, m‐xylene, and o‐xylene, for the dispersion of SWCNTs by poly(3‐dodecylthiophene) P3DDT. The dispersion yield could be increased to over 40% using decalin or o‐xylene as the solvents while maintaining high selectivity towards semiconducting SWCNTs. Molecular dynamics (MD) simulations in explicit solvents are used to explain the improved sorting yield. In addition, a general mechanism is proposed to explain the selective dispersion of semiconducting SWCNTs by conjugated polymers. The possibility to perform selective sorting of semiconducting SWCNTs using various solvents provides a greater diversity of semiconducting SWCNT ink properties, such as boiling point, viscosity, and surface tension as well as toxicity. The efficacy of these new semiconducting SWCNT inks is demonstrated by using the high boiling point and high viscosity solvent tetralin for inkjet‐printed transistors, where solvent properties are more compatible with the inkjet printing head and improved droplet formation.     

Thread‐Like CMOS Logic Circuits Enabled by Reel‐Processed Single‐Walled Carbon Nanotube Transistors via Selective Doping

The realization of large‐area electronics with full integration of 1D thread‐like devices may open up a new era for ultraflexible and human adaptable electronic systems because of their potential advantages in demonstrating scalable complex circuitry by a simply integrated weaving technology. More importantly, the thread‐like fiber electronic devices can be achieved using a simple reel‐to‐reel process, which is strongly required for low‐cost and scalable manufacturing technology. Here, high‐performance reel‐processed complementary metal‐oxide‐semiconductor (CMOS) integrated circuits are reported on 1D fiber substrates by using selectively chemical‐doped single‐walled carbon nanotube (SWCNT) transistors. With the introduction of selective n‐type doping and a nonrelief photochemical patterning process, p‐ and n‐type SWCNT transistors are successfully implemented on cylindrical fiber substrates under air ambient, enabling high‐performance and reliable thread‐like CMOS inverter circuits. In addition, it is noteworthy that the optimized reel‐coating process can facilitate improvement in the arrangement of SWCNTs, building uniformly well‐aligned SWCNT channels, and enhancement of the electrical performance of the devices. The p‐ and n‐type SWCNT transistors exhibit field‐effect mobility of 4.03 and 2.15 cm² V^?1 s^?1, respectively, with relatively narrow distribution. Moreover, the SWCNT CMOS inverter circuits demonstrate a gain of 6.76 and relatively good dynamic operation at a supply voltage of 5.0 V.     

On‐Chip Chemical Self‐Assembly of Semiconducting Single‐Walled Carbon Nanotubes (SWNTs): Toward Robust and Scale Invariant SWNTs Transistors

In this paper, the fabrication of carbon nanotubes field effect transistors by chemical self‐assembly of semiconducting single walled carbon nanotubes (s‐SWNTs) on prepatterned substrates is demonstrated. Polyfluorenes derivatives have been demonstrated to be effective in selecting s‐SWNTs from raw mixtures. In this work the authors functionalized the polymer with side chains containing thiols, to obtain chemical self‐assembly of the selected s‐SWNTs on substrates with prepatterned gold electrodes. The authors show that the full side functionalization of the conjugated polymer with thiol groups partially disrupts the s‐SWNTs selection, with the presence of metallic tubes in the dispersion. However, the authors determine that the selectivity can be recovered either by tuning the number of thiol groups in the polymer, or by modulating the polymer/SWNTs proportions. As demonstrated by optical and electrical measurements, the polymer containing 2.5% of thiol groups gives the best s‐SWNT purity. Field‐effect transistors with various channel lengths, using networks of SWNTs and individual tubes, are fabricated by direct chemical self‐assembly of the SWNTs/thiolated‐polyfluorenes on substrates with lithographically defined electrodes. The network devices show superior performance (mobility up to 24 cm² V^?1 s^?1), while SWNTs devices based on individual tubes show an unprecedented (100%) yield for working devices. Importantly, the SWNTs assembled by mean of the thiol groups are stably anchored to the substrate and are resistant to external perturbation as sonication in organic solvents.     

Solution‐Processing of High‐Purity Semiconducting Single‐Walled Carbon Nanotubes for Electronics Devices

High‐purity semiconducting single‐walled carbon nanotubes (s‐SWCNTs) are of paramount significance for the construction of next‐generation electronics. Until now, a number of elaborate sorting and purification techniques for s‐SWCNTs have been developed, among which solution‐based sorting methods show unique merits in the scale production, high purity, and large‐area film formation. Here, the recent progress in the solution processing of s‐SWCNTs and their application in electronic devices is systematically reviewed. First, the solution‐based sorting and purification of s‐SWCNTs are described, and particular attention is paid to the recent advance in the conjugated polymer‐based sorting strategy. Subsequently, the solution‐based deposition and morphology control of a s‐SWCNT thin film on a surface are introduced, which focus on the strategies for network formation and alignment of SWCNTs. Then, the recent advances in electronic devices based on s‐SWCNTs are reviewed with emphasis on nanoscale s‐SWCNTs' high‐performance integrated circuits and s‐SWCNT‐based thin‐film transistors (TFT) array and circuits. Lastly, the existing challenges and development trends for the s‐SWCNTs and electronic devices are briefly discussed. The aim is to provide some useful information and inspiration for the sorting and purification of s‐SWCNTs, as well as the construction of electronic devices with s‐SWCNTs.     

Selective Growth of Metal‐Free Metallic and Semiconducting Single‐Wall Carbon Nanotubes

A major obstacle for the use of single‐wall carbon nanotubes (SWCNTs) in electronic devices is their mixture of different types of electrical conductivity that strongly depends on their helical structure. The existence of metal impurities as a residue of a metallic growth catalyst may also lower the performance of SWCNT‐based devices. Here, it is shown that by using silicon oxide (SiO_x) nanoparticles as a catalyst, metal‐free semiconducting and metallic SWCNTs can be selectively synthesized by the chemical vapor deposition of ethanol. It is found that control over the nanoparticle size and the content of oxygen in the SiO_x catalyst plays a key role in the selective growth of SWCNTs. Furthermore, by using the as‐grown semiconducting and metallic SWCNTs as the channel material and source/drain electrodes, respectively, all‐SWCNT thin‐film transistors are fabricated to demonstrate the remarkable potential of these SWCNTs for electronic devices.     

Triple Acceptors in a Polymeric Architecture for Balanced Ambipolar Transistors and High‐Gain Inverters

The exploration of novel molecular architectures is crucial for the design of high‐performance ambipolar polymer semiconductors. Here, a “triple‐acceptors architecture” strategy to design the ambipolar polymer DPP‐2T‐DPP‐TBT is introduced. The utilization of this architecture enables DPP‐2T‐DPP‐TBT to achieve deep‐lying highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) levels of ?5.38/?4.19 eV, and strong intermolecular interactions, which are favorable for hole/electron injection and intermolecular hopping through π‐stacking. All these factors result in excellent ambipolar transport characteristics and promising applications in complementary‐like circuits for DPP‐2T‐DPP‐TBT under ambient conditions with high hole/electron mobilities and a gain value of up to 3.01/3.84 cm² V^?1 s^?1 and 171, respectively, which are among the best performances in ambipolar polymer organic thin‐film transistors and associated complementary‐like circuits, especially in top‐gate device configuration with low‐cost glass as substrates. These results demonstrate that the “triple‐acceptors architecture” strategy is an effective way for designing high‐performance ambipolar polymer semiconductors.     

Diameter‐ and Metallicity‐Selective Enrichment of Single‐Walled Carbon Nanotubes Using Polymethacrylates with Pendant Aromatic Functional Groups

Current methods for the synthesis of single‐walled nanotubes (SWNTs) produce mixtures of semiconducting (sem‐) and metallic (met‐) nanotubes. Most approaches to the chemical separation of sem‐/met‐SWNTs are based on small neutral molecules or conjugated aromatic polymers, which characteristically have low separation/dispersion efficiencies or present difficulties in the postseparation removal of the polymer so that the resulting field‐effect transistors (FETs) have poor performance. In this Full Paper, the use of three polymethacrylates with different pendant aromatic functional groups to separate cobalt–molybdenum catalyst (CoMoCAT) SWNTs according to their metallicity and diameters is reported. UV/Vis/NIR spectroscopy indicates that poly(methyl‐methacrylate‐co‐fluorescein‐o‐acrylate) (PMMAFA) and poly(9‐anthracenylmethyl‐methacrylate) (PAMMA) preferentially disperse semiconducting SWNTs while poly(2‐naphthylmethacrylate) (PNMA) preferentially disperses metallic SWNTs, all in dimethylforamide (DMF). Photoluminescence excitation (PLE) spectroscopy indicates that all three polymers preferentially disperse smaller‐diameter SWNTs, particularly those of (6,5) chirality, in DMF. When chloroform is used instead of DMF, the larger‐diameter SWNTs (8,4) and (7,6) are instead selected by PNMA. The solvent effects suggest that diameter selectivity and change of polymer conformation is probably responsible. Change of the polymer fluorescence upon interaction with SWNTs indicates that metallicity selectivity presumably results from the photon‐induced dipole–dipole interaction between polymeric chromophore and SWNTs. Thin‐film FET devices using semiconductor‐enriched solution with PMMAFA have been successfully fabricated and the device performance confirms the sem‐SWNTs enrichment with a highly reproducible on/off ratio of about 10³.     

Quantification of Uptake and Localization of Bovine Serum Albumin‐Stabilized Single‐Wall Carbon Nanotubes in Different Human Cell Types

Single‐wall carbon nanotubes (SWCNTs) possess many unique, inherent properties that make them attractive materials for application in medical and biological technologies. Development of concentrated SWCNT dispersions of isolated nanotubes that retain SWCNTs' inherent properties with minimal negative cellular effects is essential to fully realize the potential of SWCNTs in biotechnology. It is shown that bovine serum albumin (BSA), a common and well‐characterized model blood serum protein, can individually disperse SWCNTs at concentrations of up to 0.3 mg mL^?1 while retaining SWCNTs' optical properties. Uptake into human mesenchymal stem cells (hMSC) and HeLa cells is quantified, revealing strikingly high concentrations of 86 ± 33 × 10⁶ and 21 ± 13 × 10⁶ SWCNTs per cell, respectively, without any apparent acute deleterious cellular effects. Through high‐resolution confocal Raman spectroscopy and imaging, it is established that SWCNT–BSAs are preferentially localized intracellularly, especially in the cytoplasm of both hMSCs and HeLa cells. The uptake and localization results demonstrate the efficacy of BSA as a biocompatible dispersant and a mediator of bioactivity. BSA is widely available and inexpensive, which make these concentrated, highly‐dispersed, noncovalently modified SWCNT–BSAs suitable for the development of SWCNT‐based biotechnologies.     

π‐Conjugated Polymers Incorporating a Novel Planar Quinoid Building Block with Extended Delocalization and High Charge Carrier Mobility

Two novel conjugated polymers incorporating quinoidal thiophene are successfully synthesized. By combining 1D nuclear magnetic resonance (NMR) and 2D nuclear Overhauser effect spectroscopy analyses, the isomeric form of the major quinoid monomer is clearly identified as the asymmetric Z, E‐configuration. The quinoidal polymers are synthesized via Stille polymerization with thiophene or bithiophene. Both quinoidal polymers exhibit the low band gap of 1.45 eV and amphoteric redox behavior, indicating extended conjugation owing to the quinoidal backbone. These quinoidal polymers show ambipolar behaviors with high charge carrier mobilities when applied in organic field‐effect transistors. In addition, the radial alignment of polymer chains achieved by off‐center spin‐coating leads to further improvement of device performance, with poly(quinoidal thiophene–bithiophene) exhibiting a high hole mobility of 8.09 cm² V^?1 s^?1, which is the highest value among the quinoidal polymers up to now. Microstructural alteration via thermal annealing or off‐center spin‐coating is found to beneficially affect charge transport. The enhancement of crystallinity with strong π–π interactions and the nanofibrillar structure arising from planar well‐delocalized quinoid units is considered to be responsible for the high charge carrier mobility.     

In Situ Oxidation Synthesis of p‐Type Composite with Narrow‐Bandgap Small Organic Molecule Coating on Single‐Walled Carbon Nanotube: Flexible Film and Thermoelectric Performance

Although composites of organic polymers or n‐type small molecule/carbon nanotube (CNT) have achieved significant advances in thermoelectric (TE) applications, p‐type TE composites of small organic molecules as thick surface coating layers on the surfaces of inorganic nanoparticles still remain a great challenge. Taking advantage of in situ oxidation reaction of thieno[3,4‐b]pyrazine (TP) into TP di‐N‐oxide (TPNO) on single‐walled CNT (SWCNT) surface, a novel synthesis strategy is proposed to achieve flexible films of TE composites with narrow‐bandgap (1.19 eV) small molecule coating on SWCNT surface. The TE performance can be effectively enhanced and conveniently tuned by poly(sodium‐p‐styrenesulfonate) content, TPNO/SWCNT mass ratio, and posttreatment by various polar solvents. The maximum of the composite power factor at room temperature is 29.4 ± 1.0 µW m^?1 K^?2. The work presents a way to achieve flexible films of p‐type small organic molecule/inorganic composites with clear surface coating morphology for TE application.     

The Effects of Side Chains on the Charge Mobilities and Functionalities of Semiconducting Conjugated Polymers beyond Solubilities

Recent decades have witnessed the rapid development of semiconducting polymers in terms of high charge mobilities and applications in transistors. Significant efforts have been made to develop various conjugated frameworks and linkers. However, studies are increasingly demonstrating that the side chains of semiconducting polymers can significantly affect interchain packing, thin film crystallinity, and thus semiconducting performance. Ways to modify the side alkyl chains to improve the interchain packing order and charge mobilities for conjugated polymers are first discussed. It is shown that modifying the branching chains by moving the branching points away from the backbones can boost the charge mobilities, which can also be improved through partially replacing branching chains with linear ones. Second, the effects of side chains with heteroatoms and functional groups are discussed. The siloxane‐terminated side chains are utilized to enhance the semiconducting properties. The fluorinated alkyl chains are beneficial for improving both charge mobility and air stability. Incorporating H bonding group side chains can improve thin film crystallinities and boost charge mobilities. Notably, incorporating functional groups (e.g., glycol, tetrathiafulvalene, and thymine) into side chains can improve the selectivity of field‐effect transistor (FET)‐based sensors, while photochromic group containing side chains in conjugated polymers result in photoresponsive semiconductors and optically tunable FETs.     

Self‐Sorting of 10‐µm‐Long Single‐Walled Carbon Nanotubes in Aqueous Solution

Single‐walled carbon nanotubes (SWCNTs) are a class of 1D nanomaterials that exhibit extraordinary electrical and optical properties. However, many of their fundamental studies and practical applications are stymied by sample polydispersity. SWCNTs are synthesized in bulk with broad structural (chirality) and geometrical (length and diameter) distributions; problematically, all known post‐synthetic sorting methods rely on ultrasonication, which cuts SWCNTs into short segments (typically <1 µm). It is demonstrated that ultralong (>10 µm) SWCNTs can be efficiently separated from shorter ones through a solution‐phase “self‐sorting”. It is shown that thin‐film transistors fabricated from long semiconducting SWCNTs exhibit a carrier mobility as high as ≈90 cm² V^?1 s^?1, which is ≈10 times higher than those which use shorter counterparts and well exceeds other known materials such as organic semiconducting polymers (<1 cm² V^?1 s^?1), amorphous silicon (≈1 cm² V^?1 s^?1), and nanocrystalline silicon (≈50 cm² V^?1 s^?1). Mechanistic studies suggest that this self‐sorting is driven by the length‐dependent solution phase behavior of rigid rods. This length sorting technique shows a path to attain long‐sought ultralong, electronically pure carbon nanotube materials through scalable solution processing.     

A Narrow‐Bandgap n‐Type Polymer Semiconductor Enabling Efficient All‐Polymer Solar Cells

Currently, n‐type acceptors in high‐performance all‐polymer solar cells (all‐PSCs) are dominated by imide‐functionalized polymers, which typically show medium bandgap. Herein, a novel narrow‐bandgap polymer, poly(5,6‐dicyano‐2,1,3‐benzothiadiazole‐alt‐indacenodithiophene) (DCNBT‐IDT), based on dicyanobenzothiadiazole without an imide group is reported. The strong electron‐withdrawing cyano functionality enables DCNBT‐IDT with n‐type character and, more importantly, alleviates the steric hindrance associated with typical imide groups. Compared to the benchmark poly(naphthalene diimide‐alt‐bithiophene) (N2200), DCNBT‐IDT shows a narrower bandgap (1.43 eV) with a much higher absorption coefficient (6.15 × 10⁴ cm^?1). Such properties are elusive for polymer acceptors to date, eradicating the drawbacks inherited in N2200 and other high‐performance polymer acceptors. When blended with a wide‐bandgap polymer donor, the DCNBT‐IDT‐based all‐PSCs achieve a remarkable power conversion efficiency of 8.32% with a small energy loss of 0.53 eV and a photoresponse of up to 870 nm. Such efficiency greatly outperforms those of N2200 (6.13%) and the naphthalene diimide (NDI)‐based analog NDI‐IDT (2.19%). This work breaks the long‐standing bottlenecks limiting materials innovation of n‐type polymers, which paves a new avenue for developing polymer acceptors with improved optoelectronic properties and heralds a brighter future of all‐PSCs.     

Enhancing Molecular n‐Type Doping of Donor–Acceptor Copolymers by Tailoring Side Chains

In this contribution, for the first time, the molecular n‐doping of a donor–acceptor (D–A) copolymer achieving 200‐fold enhancement of electrical conductivity by rationally tailoring the side chains without changing its D–A backbone is successfully improved. Instead of the traditional alkyl side chains for poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl](NDI)‐alt‐5,5′‐(2,2′‐bithiophene)} (N2200), polar triethylene glycol type side chains is utilized and a high electrical conductivity of 0.17 S cm^?1 after doping with (4‐(1,3‐dimethyl‐2,3‐dihydro‐1H‐benzoimidazol‐2‐yl)phenyl)dimethylamine is achieved, which is the highest reported value for n‐type D–A copolymers. Coarse‐grained molecular dynamics simulations indicate that the polar side chains can significantly reduce the clustering of dopant molecules and favor the dispersion of the dopant in the host matrix as compared to the traditional alkyl side chains. Accordingly, intimate contact between the host and dopant molecules in the NDI‐based copolymer with polar side chains facilitates molecular doping with increased doping efficiency and electrical conductivity. For the first time, a heterogeneous thermoelectric transport model for such a material is proposed, that is the percolation of charge carriers from conducting ordered regions through poorly conductive disordered regions, which provides pointers for further increase in the themoelectric properties of n‐type D–A copolymers.     

Efficient Inverted Perovskite Solar Cells by Employing N‐Type (D–A1–D–A2) Polymers as Electron Transporting Layer

It is highly desirable to employ n‐type polymers as electron transporting layers (ETLs) in inverted perovskite solar cells (PSCs) due to their good electron mobility, high hydrophobicity, and simplicity of film forming. In this research, the capability of three n‐type donor–acceptor₁–donor–acceptor₂ (D–A₁–D–A₂) conjugated polymers (pBTT, pBTTz, and pSNT) is first explored as ETLs because these polymers possess electron mobilities as high as 0.92, 0.46, and 4.87 cm² (Vs)^?1 in n‐channel organic transistors, respectively. The main structural difference among pBTT, pBTTz, and pSNT is the position of sp²‐nitrogen atoms (sp²‐N) in the polymer main chains. Therefore, the effect of different substitution positions on the PSC performances is comprehensively studied. The as‐fabricated p–i–n PSCs with pBTT, pBTTz, and pSNT as ETLs show the maximum photoconversion efficiencies of 12.8%, 14.4%, and 12.0%, respectively. To be highlighted, pBTTz‐based device can maintain 80% of its stability after ten days due to its good hydrophobicity, which is further confirmed by a contact angle technique. More importantly, the pBTTz‐based device shows a neglected hysteresis. This study reveals that the n‐type polymers can be promising candidates as ETLs to approach solution‐processed highly‐efficient inverted PSCs.     

Wafer‐Scale Fabrication of High‐Performance n‐Type Polymer Monolayer Transistors Using a Multi‐Level Self‐Assembly Strategy

Wafer‐scale fabrication of high‐performance uniform organic electronic materials is of great challenge and has rarely been realized before. Previous large‐scale fabrication methods always lead to different layer thickness and thereby poor film and device uniformity. Herein, the first demonstration of 4 in. wafer‐scale, uniform, and high‐performance n‐type polymer monolayer films is reported, enabled by controlling the multi‐level self‐assembly process of conjugated polymers in solution. Since the self‐assembly process happened in solution, the uniform 2D polymer monolayers can be facilely deposited on various substrates, and theoretically without size limitations. Polymer monolayer transistors exhibit high electron mobilities of up to 1.88 cm² V^?1 s^?1, which is among the highest in n‐type monolayer organic transistors. This method allows to easily fabricate n‐type conjugated polymers with wafer‐scale, high uniformity, low contact resistance, and excellent transistor performance (better than the traditional spin‐coating method). This work provides an effective strategy to prepare large‐scale and uniform 2D polymer monolayers, which could enable the application of conjugated polymers for wafer‐scale sophisticated electronics.     

Bis‐Diketopyrrolopyrrole Moiety as a Promising Building Block to Enable Balanced Ambipolar Polymers for Flexible Transistors

A bis‐diketopyrrolopyrrole (DPP dimer, 2DPP) core is synthesized with much stronger electron deficiency than DPP by homocoupling of DPP. 2DPP‐based polymers, P2DPP‐BT, P2DPP‐TT, P2DPP‐TVT, and P2DPP‐BDT, are obtained. Top‐gated organic field‐effect transistors on plastic substrate are fabricated. Compared with their mono‐DPP‐based polymers, remarkable improvement of electron mobilities of P2DPPs is achieved. Meanwhile, their p‐channel performance becomes higher.     

Effects of Water and Different Solutes on Carbon‐Nanotube Low‐Voltage Field‐Effect Transistors

Semiconducting single‐walled carbon nanotubes (swCNTs) are a promising class of materials for emerging applications. In particular, they are demonstrated to possess excellent biosensing capabilities, and are poised to address existing challenges in sensor reliability, sensitivity, and selectivity. This work focuses on swCNT field‐effect transistors (FETs) employing rubbery double‐layer capacitive dielectric poly(vinylidene fluoride‐co‐hexafluoropropylene). These devices exhibit small device‐to‐device variation as well as high current output at low voltages (<0.5 V), making them compatible with most physiological liquids. Using this platform, the swCNT devices are directly exposed to aqueous solutions containing different solutes to characterize their effects on FET current–voltage (FET I–V) characteristics. Clear deviation from ideal characteristics is observed when swCNTs are directly contacted by water. Such changes are attributed to strong interactions between water molecules and sp²‐hybridized carbon structures. Selective response to Hg²⁺ is discussed along with reversible pH effect using two distinct device geometries. Additionally, the influence of aqueous ammonium/ammonia in direct contact with the swCNTs is investigated. Understanding the FET I–V characteristics of low‐voltage swCNT FETs may provide insights for future development of stable, reliable, and selective biosensor systems.     

A Chemically Doped Naphthalenediimide‐Bithiazole Polymer for n‐Type Organic Thermoelectrics

The synthesis of a novel naphthalenediimide (NDI)‐bithiazole (Tz2)‐based polymer [P(NDI2OD‐Tz2)] is reported, and structural, thin‐film morphological, as well as charge transport and thermoelectric properties are compared to the parent and widely investigated NDI‐bithiophene (T2) polymer [P(NDI2OD‐T2)]. Since the steric repulsions in Tz2 are far lower than in T2, P(NDI2OD‐Tz2) exhibits a more planar and rigid backbone, enhancing π–π chain stacking and intermolecular interactions. In addition, the electron‐deficient nature of Tz2 enhances the polymer electron affinity, thus reducing the polymer donor–acceptor character. When n‐doped with amines, P(NDI2OD‐Tz2) achieves electrical conductivity (≈0.1 S cm^?1) and a power factor (1.5 µW m^?1 K^?2) far greater than those of P(NDI2OD‐T2) (0.003 S cm^?1 and 0.012 µW m^?1 K^?2, respectively). These results demonstrate that planarized NDI‐based polymers with reduced donor–acceptor character can achieve substantial electrical conductivity and thermoelectric response.