Multiwall Carbon Nanotubes Mediate Macrophage Activation and Promote Pulmonary Fibrosis Through TGF‐β/Smad Signaling Pathway

Multiwall carbon nanotubes (MWCNTs) have been widely used in many disciplines due to their unique physical and chemical properties, but have also raised great concerns about their possible negative health impacts, especially through occupational exposure. Although recent studies have demonstrated that MWCNTs induce granuloma formation and/or fibrotic responses in the lungs of rats or mice, their cellular and molecular mechanisms remain largely unaddressed. Here, it is reported that the TGF‐β/Smad signaling pathway can be activated by MWCNTs and play a critical role in MWCNT‐induced pulmonary fibrosis. Firstly, in vivo data show that spontaneously hypertensive (SH) rats administered long MWCNTs (20–50 μm) but not short MWCNTs (0.5–2 μm) exhibit increased fibroblast proliferation, collagen deposition and granuloma formation in lung tissue. Secondly, the in vivo experiments also indicate that only long MWCNTs can significantly activate macrophages and increase the production of transforming growth factor (TGF)‐β1, which induces the phosphorylation of Smad2 and then the expression of collagen I/III and extracellular matrix (ECM) protease inhibitors in lung tissues. Finally, the present in vitro studies further demonstrate that the TGF‐β/Smad signaling pathway is indeed necessary for the expression of collagen III in fibroblast cells. Together, these data demonstrate that MWCNTs stimulate pulmonary fibrotic responses such as fibroblast proliferation and collagen deposition in a TGF‐β/Smad‐dependent manner. These observations also suggest that tube length acts as an important factor in MWCNT‐induced macrophage activation and subsequent TGF‐β1 secretion. These in vivo and in vitro studies further highlight the potential adverse health effects that may occur following MWCNT exposure and provide a better understanding of the cellular and molecular mechanisms by which MWCNTs induce pulmonary fibrotic reactions.     

TGF‐β1 Conjugated to Gold Nanoparticles Results in Protein Conformational Changes and Attenuates the Biological Function

Gold nanoparticles (AuNPs) are widely used as carriers or therapeutic agents due to their great biocompatibility and unique physical properties. Transforming growth factor‐beta 1 (TGF‐β1), a member of the cysteine‐knot structural superfamily, plays a pivotal role in many diseases and is known as an immunosuppressive agent that attenuates immune response resulting in tumor growth. The results reported herein reflect strong interactions between TGF‐β1 and the surface of AuNPs when incubated with serum‐containing medium, and demonstrate a time‐ and dose‐dependent pattern. Compared with other serum proteins that can also bind to the AuNP surface, AuNP–TGFβ1 conjugate is a thermodynamically favored compound. Epithelial cells undergo epithelial–mesenchymal transition (EMT) upon treatment with TGF‐β1; however, treatment with AuNPs reverses this effect, as detected by cell morphology and expression levels of EMT markers. TGF‐β1 is found to bind to AuNPs through S–Au bonds by X‐ray photoelectron spectroscopy. Fourier transform infrared spectroscopy is employed to analyze the conformational changes of TGF‐β1 on the surface of AuNPs. The results indicate that TGF‐β1 undergoes significant conformational changes at both secondary and tertiary structural levels after conjugation to the AuNP surface, which results in the deactivation of TGF‐β1 protein. An in vivo experiment also shows that addition of AuNPs attenuates the growth of TGF‐β1‐secreting murine bladder tumor 2 cells in syngeneic C3H/HeN mice, but not in immunocompromised NOD‐SCID mice, and this is associated with an increase in the number of tumor‐infiltrating CD4⁺ and CD8⁺ T lymphocytes and a decrease in the number of intrasplenic Foxp3(+) lymphocytes. The findings demonstrate that AuNPs may be a promising agent for modulating tumor immunity through inhibiting immunosuppressive TGF‐β1 signaling.     

Precise and Arbitrary Deposition of Biomolecules onto Biomimetic Fibrous Matrices for Spatially Controlled Cell Distribution and Functions

Advances in nano‐/microfabrication allow the fabrication of biomimetic substrates for various biomedical applications. In particular, it would be beneficial to control the distribution of cells and relevant biomolecules on an extracellular matrix (ECM)‐like substrate with arbitrary micropatterns. In this regard, the possibilities of patterning biomolecules and cells on nanofibrous matrices are explored here by combining inkjet printing and electrospinning. Upon investigation of key parameters for patterning accuracy and reproducibility, three independent studies are performed to demonstrate the potential of this platform for: i) transforming growth factor (TGF)‐β1‐induced spatial differentiation of fibroblasts, ii) spatiotemporal interactions between breast cancer cells and stromal cells, and iii) cancer‐regulated angiogenesis. The results show that TGF‐β1 induces local fibroblast‐to‐myofibroblast differentiation in a dose‐dependent fashion, and breast cancer clusters recruit activated stromal cells and guide the sprouting of endothelial cells in a spatially resolved manner. The established platform not only provides strategies to fabricate ECM‐like interfaces for medical devices, but also offers the capability of spatially controlling cell organization for fundamental studies, and for high‐throughput screening of various biomolecules for stem cell differentiation and cancer therapeutics.     

Nano‐TiO2 Drives Epithelial–Mesenchymal Transition in Intestinal Epithelial Cancer Cells

The majority of cancer mortality is associated with cancer metastasis. Epithelial‐to‐mesenchymal transition (EMT) is a process by which cells attain migratory and invasive properties, eventually leading to cancer metastasis. Here, it is shown that titanium dioxide nanoparticles (nano‐TiO₂), a common food additive, can induce the EMT process in colorectal cancer cells. Nano‐TiO₂ exposure is observed to activate transforming growth factor‐β (TGF‐β)/mitogen‐activated protein kinase (MAPK) and wingless (Wnt) pathways, and drive the EMT process. Similarly, silica nanoparticles (nano‐SiO₂) and hydroxyapatite nanoparticles (nano‐HA), as food‐based additives, can be ingested and accumulated in the stomach, and are found to be able to induce the EMT progression. The implication of this work can be profound for colorectal cancer patients where these food additives may unknowingly and unnecessarily hasten the progression of their cancers.     

Biologically Inspired,Cell‐Selective Release of Aptamer‐Trapped Growth Factors by Traction Forces

Biomaterial scaffolds that are designed to incorporate dynamic, spatiotemporal information have the potential to interface with cells and tissues to direct behavior. Here, a bioinspired, programmable nanotechnology‐based platform is described that harnesses cellular traction forces to activate growth factors, eliminating the need for exogenous triggers (e.g., light), spatially diffuse triggers (e.g., enzymes, pH changes), or passive activation (e.g., hydrolysis). Flexible aptamer technology is used to create modular, synthetic mimics of the Large Latent Complex that restrains transforming growth factor‐β1 (TGF‐β1). This flexible nanotechnology‐based approach is shown here to work with both platelet‐derived growth factor‐BB (PDGF‐BB) and vascular endothelial growth factor (VEGF‐165), integrate with glass coverslips, polyacrylamide gels, and collagen scaffolds, enable activation by various cells (e.g., primary human dermal fibroblasts, HMEC‐1 endothelial cells), and unlock fundamentally new capabilities such as selective activation of growth factors by differing cell types (e.g., activation by smooth muscle cells but not fibroblasts) within clinically relevant collagen sponges.     

The Genetic Heterogeneity among Different Mouse Strains Impacts the Lung Injury Potential of Multiwalled Carbon Nanotubes

Genetic variation constitutes an important variable impacting the susceptibility to inhalable toxic substances and air pollutants, as reflected by epidemiological studies in humans and differences among animal strains. While multiwalled carbon nanotubes (MWCNTs) are capable of causing lung fibrosis in rodents, it is unclear to what extent the genetic variation in different mouse strains influence the outcome. Four inbred mouse strains, including C57Bl/6, Balb/c, NOD/ShiLtJ, and A/J, to test the pro‐fibrogenic effects of a library of MWCNTs in vitro and in vivo are chosen. Ex vivo analysis of IL‐1β production in bone marrow‐derived macrophages (BMDMs) as molecular initiating event (MIE) is performed. The order of cytokine production (Balb/c > A/J > C57Bl/6 > NOD/ShiLtJ) in BMDMs is also duplicated during assessment of IL‐1β production in the bronchoalveolar lavage fluid of the same mouse strains 40 h after oropharyngeal instillation of a representative MWCNT. Animal test after 21 d also confirms a similar hierarchy in TGF‐β1 production and collagen deposition in the lung. Statistical analysis confirms a correlation between IL‐1β production in BMDM and the lung fibrosis. All considered, these data demonstrate that genetic background indeed plays a major role in determining the pro‐fibrogenic response to MWCNTs in the lung.     

Carbon Nanotubes Disrupt Iron Homeostasis and Induce Anemia of Inflammation through Inflammatory Pathway as a Secondary Effect Distant to Their Portal‐of‐Entry

Although numerous toxicological studies have been performed on carbon nanotubes (CNTs), a few studies have investigated their secondary and indirect effects beyond the primary target tissues/organs. Here, a cascade of events are investigated: the initiating event and the subsequent key events necessary for the development of phenotypes, namely CNT‐induced pro‐inflammatory effects on iron homeostasis and red blood cell formation, which are linked to anemia of inflammation (AI). A panel of CNTs are prepared including pristine multiwall CNTs (P‐MWCNTs), aminated MWCNTs (MWCNTs‐NH₂), polyethylene glycol MWCNTs (MWCNTs‐PEG), polyethyleneimine MWCNTs (MWCNTs‐PEI), and carboxylated MWCNTs (MWCNTs‐COOH). It has been demonstrated that all CNT materials provoke inflammatory cytokine interleukin‐6 (IL‐6) production and stimulate hepcidin induction, associated with disordered iron homeostasis, irrespective of exposure routes including intratracheal, intravenous, and intraperitoneal administration. Meanwhile, PEG and COOH modifications can ameliorate the activation of IL‐6‐hepcidin signaling. Long‐term exposure of MWCNTs results in AI and extramedullary erythropoiesis. Thus, an adverse outcome pathway is identified: MWCNT exposure leads to inflammation, hepatic hepcidin induction, and disordered iron metabolism. Together, the combined data depict the hazardous secondary toxicity of CNTs in incurring anemia through inflammatory pathway. This study will also open a new avenue for future investigations on CNT‐induced indirect and secondary adverse effects.     

Sequential Targeting TGF‐β Signaling and KRAS Mutation Increases Therapeutic Efficacy in Pancreatic Cancer

Pancreatic cancer is a highly aggressive malignancy that strongly resists extant treatments. The failure of existing therapies is majorly attributed to the tough tumor microenvironment (TME) limiting drug access and the undruggable targets of tumor cells. The formation of suppressive TME is regulated by transforming growth factor beta (TGF‐β) signaling, while the poor response and short survival of almost 90% of pancreatic cancer patients results from the oncogenic KRAS mutation. Hence, simultaneously targeting both the TGF‐β and KRAS pathways might dismantle the obstacles of pancreatic cancer therapy. Here, a novel sequential‐targeting strategy is developed, in which antifibrotic fraxinellone‐loaded CGKRK‐modified nanoparticles (Frax‐NP‐CGKRK) are constructed to regulate TGF‐β signaling and siRNA‐loaded lipid‐coated calcium phosphate (LCP) biomimetic nanoparticles (siKras‐LCP‐ApoE3) are applied to interfere with the oncogenic KRAS. Frax‐NP‐CGKRK successfully targets the tumor sites through the recognition of overexpressed heparan sulfate proteoglycan, reverses the activated cancer‐associated fibroblasts (CAFs), attenuates the dense stroma barrier, and enhances tumor blood perfusion. Afterward, siKras‐LCP‐ApoE3 is efficiently internalized by the tumor cells through macropinocytosis and specifically silencing KRAS mutation. Compared with gemcitabine, this sequential‐targeting strategy significantly elongates the lifespans of pancreatic tumor‐bearing animals, hence providing a promising approach for pancreatic cancer therapy.     

Molecular characterization of the cytotoxic mechanism of multiwall carbon nanotubes and nano-onions on human skin fibroblast

The increasing use of nanotechnology in consumer products and medical applications underlies the importance of understanding its potential toxic effects to people and the environment. Although both fullerene and carbon nanotubes have been demonstrated to accumulate to cytotoxic levels within organs of various animal models and cell types and carbon nanomaterials have been exploited for cancer therapies, the molecular and cellular mechanisms for cytotoxicity of this class of nanomaterial are not yet fully apparent. To address this question, we have performed whole genome expression array analysis and high content image analysis based phenotypic measurements on human skin fibroblast cell populations exposed to multiwall carbon nano-onions (MWCNOs) and multiwall carbon nanotubes (MWCNTs). Here we demonstrate that exposing cells to MWCNOs and MWCNTs at cytotoxic doses induces cell cycle arrest and increases apoptosis/necrosis. Expression array analysis indicates that multiple cellular pathways are perturbed after exposure to these nanomaterials at these doses, with material-specific toxigenomic profiles observed. Moreover, there are also distinct qualitative and quantitative differences in gene expression profiles, with each material at different dosage levels (6 and 0.6 microg/mL for MWCNO and 0.6 and 0.06 microg/mL for MWCNT). MWCNO and MWCNT exposure activates genes involved in cellular transport, metabolism, cell cycle regulation, and stress response. MWCNTs induce genes indicative of a strong immune and inflammatory response within skin fibroblasts, while MWCNO changes are concentrated in genes induced in response to external stimuli. Promoter analysis of the microarray results demonstrate that interferon and p38/ERK-MAPK cascades are critical pathway components in the induced signal transduction contributing to the more adverse effects observed upon exposure to MWCNTs as compared to MWCNOs.     

NADPH Oxidase‐Dependent NLRP3 Inflammasome Activation and its Important Role in Lung Fibrosis by Multiwalled Carbon Nanotubes

The purpose of this paper is to elucidate the key role of NADPH oxidase in NLRP3 inflammasome activation and generation of pulmonary fibrosis by multi‐walled carbon nanotubes (MWCNTs). Although it is known that oxidative stress plays a role in pulmonary fibrosis by single‐walled CNTs, the role of specific sources of reactive oxygen species, including NADPH oxidase, in inflammasome activation remains to be clarified. In this study, three long aspect ratio (LAR) materials (MWCNTs, single‐walled carbon nanotubes, and silver nanowires) are used to compare with spherical carbon black and silver nanoparticles for their ability to trigger oxygen burst activity and NLRP3 assembly. All LAR materials but not spherical nanoparticles induce robust NADPH oxidase activation and respiratory burst activity in THP‐1 cells, which are blunted in p22^phox‐deficient cells. The NADPH oxidase is directly involved in lysosomal damage by LAR materials, as demonstrated by decreased cathepsin B release and IL‐1β production in p22^phox‐deficient cells. Reduced respiratory burst activity and inflammasome activation are also observed in bone marrow‐derived macrophages from p47^phox‐deficient mice. Moreover, p47^phox‐deficient mice have reduced IL‐1β production and lung collagen deposition in response to MWCNTs. Lung fibrosis is also suppressed by N‐acetyl‐cysteine in wild‐type animals exposed to MWCNTs.     

Carbon nanotubes reinforced chitosan films: mechanical properties and cell response of a novel biomaterial for cardiovascular tissue engineering

Carbon nanotubes have been proposed as fillers to reinforce polymeric biomaterials for the strengthening of their structural integrity to achieve better biomechanical properties. In this study, a new polymeric composite material was introduced by incorporating various low concentrations of multiwalled carbon nanotubes (MWCNTs) into chitosan (CS), aiming at achieving a novel composite biomaterial with superior mechanical and biological properties compared to neat CS, in order to be used in cardiovascular tissue engineering applications. Both mechanical and biological characteristics in contact with the two relevant cell types (endothelial cells and vascular myofibroblasts) were studied. Regarding the mechanical behavior of MWCNT reinforced CS (MWCNT/CS), 5 and 10 % concentrations of MWCNTs enhanced the mechanical behavior of CS, with that of 5 % exhibiting a superior mechanical strength compared to 10 % concentration and neat CS. Regarding biological properties, MWCNT/CS best supported proliferation of endothelial and myofibroblast cells, MWCNTs and MWCNT/CS caused no apoptosis and were not toxic of the examined cell types. Conclusively, the new material could be suitable for tissue engineering (TE) and particularly for cardiovascular TE applications.     

Tracking Drug‐Induced Epithelial–Mesenchymal Transition in Breast Cancer by a Microfluidic Surface‐Enhanced Raman Spectroscopy Immunoassay

Epithelial–mesenchymal transition (EMT) is a primary mechanism for cancer metastasis. Detecting the activation of EMT can potentially convey signs of metastasis to guide treatment management and improve patient survival. One of the classic signatures of EMT is characterized by dynamic changes in cellular expression levels of E‐cadherin and N‐cadherin, whose soluble active fragments have recently been reported to be biomarkers for cancer diagnosis and prognosis. Herein, a microfluidic immunoassay (termed “SERS immunoassay”) based on sensitive and simultaneous detection of soluble E‐cadherin (sE‐cadherin) and soluble N‐cadherin (sN‐cadherin) for EMT monitoring in patients' plasma is presented. The SERS immunoassay integrates in situ nanomixing and surface‐enhanced Raman scattering readout to enable accurate detection of sE‐cadherin and sN‐cadherin from as low as 10 cells mL^?1. This assay enables tracking of a concurrent decrease in sE‐cadherin and increase in sN‐cadherin in breast cancer cells undergoing drug‐induced mesenchymal transformation. The clinical potential of the SERS immunoassay is further demonstrated by successful detection of sE‐cadherin and sN‐cadherin in metastatic stage IV breast cancer patient plasma samples. The SERS immunoassay can potentially sense the activation of EMT to provide early indications of cancer invasions or metastasis.     

A Novel Microwave‐Assisted Carbothermic Route for the Production of Copper‐Carbon Nanotube Metal Matrix Composites Directly from Copper Oxide

Cu₂O was reduced to copper via a microwave‐assisted carbothermic route using multi‐walled carbon nanotubes (MWCNTs) as the carbon source. The reaction atmosphere as well as the degree of mixing of Cu₂O and MWCNTs was varied, and the resulting products were characterized as a function of microwave exposure time. Irradiation of thoroughly mixed Cu₂O and MWCNTs under argon for 45 s produced Cu‐MWCNT composites with high MWCNT loading and high hardness. This new approach for fabricating carbon nanotube‐reinforced metal matrix composites eliminates many of the challenges associated with traditional methods while requiring a fraction of the time and energy.     

Identification of the anthelix motif in the TGF‐β superfamily by molecular 3D‐Rapid Prototyping

3D‐Rapid Prototyping (3D‐RP) is a novel technique for the construction of highly accurate three‐dimensional polyamide models of biomolecules. This method has been shown to be a valuable tool in the modeling of protein‐protein‐interactions as well as in the analysis of surface topography. Using this technique we were recently able to identify a so far unknown structure on the concave side of bone morphogenetic protein 2 (BMP‐2). Since this structure is the imprint of a left‐handed helix we have called this negative an unthelix. Obviously this novel structural feature of BMP‐2 may act as a binding side for endogenous ligands. BMP‐2 belongs to the highly conserved Transforming Growth Factor‐β (TGF‐β) superfamily, a large group of multifunctional peptides controlling differentiation, proliferation and repair in multicellular organism. The protomer structures of all members share a cystine‐knot motif as a characteristic feature. The question therefore arose whether a) the novel anthelical motif found in BMP‐2 is a common structural feature of this family and b) if there are any differences in terms of pitch and radius of the anthelix. As anthelical structures are difficult to visualize and nearly impossible to quantify using 3D molecular visualization software we constructed models of BMP‐2, BMP‐7 and TGF‐β2 from X‐ray crystallographic data by 3D‐Rapid Prototyping (3D‐RP). The anthelix motif was found in BMP‐2, BMP‐7 and TGF‐β2 with similar values for pitch (ca. 8‐10 nm) and radius (ca. 0.5‐0.7 nm). In contrast the anthelical motif was not found in a 3D‐RP model of human chorionic gonadotropin (HCG) which is also a member of the cystine‐knot family but doesn’t belong to the TGF‐β superfamily. These results were corroborated by measurements of the intersubunit angle of these dimeric proteins (141‐149°) and the distances between the center of mass (1.68‐1.96 nm) of the subunits both of which appear to be determinants of the anthelical pitch. We conclude that the anthelical groove on the concave side is a common structural motif of BMP‐2, BMP‐7 and TGF‐β2 and maybe of the whole group of the TGF‐β superfamily.     

Role of immune cells and inflammatory cytokines in regulation of fibrosis around silicone expander implants

This study aimed to investigate the progress of wound healing around silicone expander with particular emphasis on fibroblasts, myofibroblasts and collagen in the repair phase. Semi-quantitative evaluation of inflammatory cells and their cytokines, fibroblasts and myofibroblasts at the tissue–material interface was carried out. Commercially available silicone expander was implanted in gluteus muscle of young female Wistar rats for 3, 7, 14, 30, 90 and 180 days. Ultra high molecular weight polyethylene served as control. The cellular response was studied by immunohistochemistry and Transmission Electron Microscopy. A thick collagenous fibrous capsule was observed around the silicone expander at 180 days, with persistent myofibroblasts, lymphocytes and macrophages as compared to the thin fibrous encapsulation around the UHMWPE implants. The regulatory role of cytokines and immune cells in myofibroblast persistence in tissue–implant interface around silicone expander has been extensively studied. Results of this study indicate the need to elucidate the signaling molecules in the transition of fibroblast to myofibroblast around silicone expander implants.     

Human‐Finger Electronics Based on Opposing Humidity‐Resistance Responses in Carbon Nanofilms

Carbon nanomaterials have excellent humidity sensing properties. Here, it is demonstrated that multiwalled carbon‐nanotube (MWCNT)‐ and reduced‐graphene‐oxide (rGO)‐based conductive films have opposite humidity/electrical resistance responses: MWCNTs increase their electrical resistance (positive response) and rGOs decrease their electrical resistance (negative response). The authors propose a new phenomenology that describes a “net”‐like model for MWCNT films and a “scale”‐like model for rGO films to explain these behaviors based on contributions from junction resistances (at interparticle junctions) and intrinsic resistances (of the particles). This phenomenology is accordingly validated via a series of experiments, which complement more classical models based on proton conductivity. To explore the practical applications of the converse humidity/resistance responses, a humidity‐insensitive MWCNT/rGO hybrid conductive films is developed, which has the potential to greatly improve the stability of carbon‐based electrical device to humidity. The authors further investigate the application of such films to human‐finger electronics by fabricating transparent flexible devices consisting of a polyethylene terephthalate substrate equipped with an MWCNT/rGO pattern for gesture recognition, and MWCNT/rGO/MWCNT or rGO/MWCNT/rGO patterns for 3D noncontact sensing, which will be complementary to existing 3D touch technology.     

Load-bearing contribution of multi-walled carbon nanotubes on tensile response of aluminum

We fabricated a uniformly dispersed and aligned multi-walled carbon nanotube reinforced aluminum matrix (Al–MWCNT) composite with minimal work hardening and without interfacial chemical compounds. In this paper, the direct load-bearing contribution of MWCNTs on the Al–MWCNT composite was investigated in detail for various volume fractions of MWCNTs. For up to 0.6 vol% of MWCNTs, the ultimate tensile strength (UTS) of the Al–MWCNT composite increased with the conservation of the remarkable failure elongation of Al. These UTS values are consistent with shear lag model. We also observed an uncommon multi-wall-type failure of MWCNTs during the hot extrusion process. However, owing to the agglomeration of MWCNTs in the Al matrix, the UTS deviated significantly from the shear lag model and the remarkable failure elongation of Al decreased. The possibility of strengthening, without degrading ductility, was demonstrated by exploiting directly the load-bearing ability of individually and uniformly dispersed aligned MWCNTs.     

Carbon nanotube modification using gum arabic and its effect on the dispersion and tensile properties of carbon nanotubes/epoxy nanocomposites

In this study, the effects of a MWCNT treatment on the dispersion of MWCNTs in aqueous solution and the tensile properties of MWCNT/epoxy nanocomposites were investigated. MWCNTs were treated using acid and gum arabic, and MWCNT/epoxy nanocomposites were fabricated with 0.3 wt.% unmodified, oxidized and gum-treated MWCNTs. The dispersion states of the unmodified, oxidized, and Gum-treated MWCNTs were characterized in distilled water. The tensile strengths and elastic modulus of the three nanocomposites were determined and compared. The results indicated that the gum treatment produced better dispersion of the MWCNTs in distilled water and that gum-treated MWCNT/epoxy nanocomposites had a better tensile strength and elastic modulus than did the unmodified and acid-treated MWCNT/epoxy nanocomposites. Scanning electron microscope examination of the fracture surface showed that the improved tensile properties of the gum-treated MWCNT/epoxy nanocomposites were attributed to the improved dispersion of MWCNTs in the epoxy and to interfacial bonding between nanotubes and the epoxy matrix.     

Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.     

Study on the Sliding Friction of Endothelial Cells Cultured on Hydrogel and the Role of Glycocalyx on Friction Reduction

We investigate the sliding friction of HUVEC monolayers cultured on PNaSS gel, intending to elucidate the role of glycocalyx on the surface of ECs in friction reduction. Three sets of HUVEC monolayers are investigated: an as‐cultured HUVEC monolayer; a HUVEC monolayer treated with TGF‐β₁, which increases the glycocalyx by 148%; and a HUVEC monolayer treated with heparinase I, which reduces the glycocalyx by 57%. When being slid on a flat, glass surface, the frictional stress of the HUVEC monolayer decreases in the order: heparinase‐I‐treated > as‐cultured > TGF‐β₁‐treated samples. The results suggest that glycocalyx may play a role in reducing the friction of endothelial cell monolayer.