Gas sensors based on doped-CNT/SnO2 composites for NO2 detection at room temperature

For the first time nitrogen or boron doped carbon nanotubes were added into a SnO₂ matrix to develop a new hybrid CNTs/SnO₂ gas sensors. The hybrid sensor is utilised to detect low ppb concentrations of NO₂ in air, by measuring resistance changes of thin CNTs/SnO₂ films. The tests are performed at room temperature. For comparison, pure SnO₂ and N or B-substituted CNT sensors are also examined. Comparative gas sensing results reveal that the CNTs/SnO₂ hybrid sensors exhibit much higher response towards NO₂, at least by a factor of 10, and good baseline recovery properties at room temperature than the blank SnO₂ and the N or B-substituted CNT sensors. This finding shows that doping SnO₂ with low quantity of CNTs doped with heteroatoms can dramatically improve sensitivity.     

Effect of Au and NiO catalysts on the NO<Subscript>2</Subscript> sensing properties of nanocrystalline SnO<Subscript>2</Subscript>

Nanocrystalline tin dioxide has been synthesized, and its surface has been modified with Au and NiO. Their distributions in the nanocrystalline tin dioxide have been examined by X-ray diffraction and transmission electron microscopy. The NO₂ sensing properties of the materials have been studied in the range 100–1000 ppb. Both gold and nickel enhance the NO₂ response of SnO₂. Codoping with Au and NiO markedly enhances its sensing response and, in addition, lowers the peak response temperature. The observed effect of NO₂ concentration in dry air on the sensing response of the SnO₂〈Au, NiO〉 nanocomposite can be understood in terms of the sequence of processes that take place on the SnO₂ surface upon nitrogen dioxide adsorption in the presence of chemisorbed oxygen.     

Intrinsic Ferromagnetism in Mn‐Substituted MoS2 Nanosheets Achieved by Supercritical Hydrothermal Reaction

Doping atomically thick nanosheets is a great challenge due to the self‐purification effect that drives the precipitation of dopants. Here, a breakthrough is made to dope Mn atoms substitutionally into MoS₂ nanosheets in a sulfur‐rich supercritical hydrothermal reaction environment, where the formation energy of Mn substituting for Mo sites in MoS₂ is significantly reduced to overcome the self‐purification effect. The substitutional Mn doping is convincingly evidenced by high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray absorption fine spectroscopy characterizations. The Mn‐doped MoS₂ nanosheets show robust intrinsic ferromagnetic response with a saturation magnetic moment of 0.05 µ _B Mn^?1 at room temperature. The intrinsic ferromagnetism is further confirmed by the reversibility of the magnetic behavior during the cycle of incorporating/removing Li codopants, showing the critical role of Mn 3d electronic states in mediating the magnetic interactions in MoS₂ nanosheets.     

Layer Thinning and Etching of Mechanically Exfoliated MoS2 Nanosheets by Thermal Annealing in Air

A simple thermal annealing method for layer thinning and etching of mechanically exfoliated MoS₂ nanosheets in air is reported. Using this method, single‐layer (1L) MoS₂ nanosheets are achieved after the thinning of MoS₂ nanosheets from double‐layer (2L) to quadri‐layer (4L) at 330 °C. The as‐prepared 1L MoS₂ nanosheet shows comparable optical and electrical properties with the mechanically exfoliated, pristine one. In addition, for the first time, the MoS₂ mesh with high‐density of triangular pits is also fabricated at 330 °C, which might arise from the anisotropic etching of the active MoS₂ edge sites. As a result of thermal annealing in air, the thinning of MoS₂ nanosheet is possible due to its oxidation to form MoO₃. Importantly, the MoO₃ fragments on the top of thinned MoS₂ layer induces the hole injection, resulting in the p‐type channel in fabricated field‐effect transistors.     

Engineering 2D Metal–Organic Framework/MoS2 Interface for Enhanced Alkaline Hydrogen Evolution

2D metal–organic frameworks (MOFs) have been widely investigated for electrocatalysis because of their unique characteristics such as large specific surface area, tunable structures, and enhanced conductivity. However, most of the works are focused on oxygen evolution reaction. There are very limited numbers of reports on MOFs for hydrogen evolution reaction (HER), and generally these reported MOFs suffer from unsatisfactory HER activities. In this contribution, novel 2D Co‐BDC/MoS₂ (BDC stands for 1,4‐benzenedicarboxylate, C₈H₄O₄) hybrid nanosheets are synthesized via a facile sonication‐assisted solution strategy. The introduction of Co‐BDC induces a partial phase transfer from semiconducting 2H‐MoS₂ to metallic 1T‐MoS₂. Compared with 2H‐MoS₂, 1T‐MoS₂ can activate the inert basal plane to provide more catalytic active sites, which contributes significantly to improving HER activity. The well‐designed Co‐BDC/MoS₂ interface is vital for alkaline HER, as Co‐BDC makes it possible to speed up the sluggish water dissociation (rate‐limiting step for alkaline HER), and modified MoS₂ is favorable for the subsequent hydrogen generation step. As expected, the resultant 2D Co‐BDC/MoS₂ hybrid nanosheets demonstrate remarkable catalytic activity and good stability toward alkaline HER, outperforming those of bare Co‐BDC, MoS₂, and almost all the previously reported MOF‐based electrocatalysts.     

Layered Aggregation with Steric Effect: Morphology‐Homogeneous Semiconductor MoS2 as an Alternative 2D Probe for Visual Immunoassay

Liquid‐phase exfoliation routes unavoidably generate 2D nanostructures with inhomogeneous morphologies. Herein, thickness‐dependent sorting of exfoliated nanostructures is achieved via a treatment of differential‐zone centrifugation in the surfactant aqueous phase. With this approach, homogeneous MoS₂ nanosheets are obtained, and due to the intrinsic semiconducting characteristics, those 2D nanosheets are endowed with desired optical properties, rivaling classic gold nanoparticles in sensing applications. Furthermore, MoS₂ nanosheets with high uniformity and chemical inertness are coupled with proteins, exhibiting high performance in stability and anti‐interferences for bioanalysis. As a consequence of aggregation‐induced steric effect, distinguishing running shifts of antibody‐anchored conjugates in gel electrophoresis are visually responsive to those specific antigens. This assay enables the easy and fast monitoring of tumor biomarkers just according to “naked‐eye” identification of band location in electrophoresis results, which are presented by an alternative visual probe of 2D MoS₂‐protein conjugates. The developed visual immunoassay with the synergistic effect of gel electrophoresis techniques and 2D semiconductors pushes significant progress in “home‐made” tests for disease early diagnosis.     

Sandwich‐like MoS2@SnO2@C with High Capacity and Stability for Sodium/Potassium Ion Batteries

Sandwich‐like MoS₂@SnO₂@C nanosheets are prepared by facile hydrothermal reactions. SnO₂ nanosheets can attach to exfoliated MoS₂ nanosheets to prevent restacking of adjacent MoS₂ nanosheets, and carbon transformed from polyvinylpyrrolidone is coated on MoS₂@SnO₂, forming a sandwich structure to maintain cycling stability. As an anode for sodium‐ion batteries, the electrode greatly deliverers a high initial discharge specific capacity of 530 mA h g^?1 and maintains at 396 mA h g^?1 after 150 cycles at 0.1 A g^?1. Even at a large current density of 1 A g^?1, it can hold 230 mA h g^?1 after 450 cycles. Besides, as an anode for K⁺ storage, the electrode also shows a discharge capacity of 312 mA h g^?1 after 25 cycles at 0.05 A g^?1. This work may provide a new strategy to prepare other composites which can be applied to new kind of rechargeable batteries.     

二硫化钼纳米片的制备及其光敏和气敏特性研究

利用高温硫化法制备了高纯度MoS_2纳米片。采用X射线衍射仪(XRD)、拉曼光谱仪(Raman spectrometer)、扫描电镜(SEM)和能谱仪(EDS)对MoS_2纳米片的物相、结晶质量以及形貌进行了表征,分析了反应温度对MoS_2纳米片的影响,并对MoS_2纳米片的光敏性和气敏特性进行了研究。结果表明,MoS_2纳米片对绿光响应度更高,红光次之,对甲醇和乙醇两种气体均有较高的灵敏度和响应/恢复速率,并对其气敏机理进行了讨论。     

Structural Phase Transition Effect on Resistive Switching Behavior of MoS2‐Polyvinylpyrrolidone Nanocomposites Films for Flexible Memory Devices

The 2H phase and 1T phase coexisting in the same molybdenum disulfide (MoS₂) nanosheets can influence the electronic properties of the materials. The 1T phase of MoS₂ is introduced into the 2H‐MoS₂ nanosheets by two‐step hydrothermal synthetic methods. Two types of nonvolatile memory effects, namely write‐once read‐many times memory and rewritable memory effect, are observed in the flexible memory devices with the configuration of Al/1T@2H‐MoS₂‐polyvinylpyrrolidone (PVP)/indium tin oxide (ITO)/polyethylene terephthalate (PET) and Al/2H‐MoS₂‐PVP/ITO/PET, respectively. It is observed that structural phase transition in MoS₂ nanosheets plays an important role on the resistive switching behaviors of the MoS₂‐based device. It is hoped that our results can offer a general route for the preparation of various promising nanocomposites based on 2D nanosheets of layered transition metal dichalcogenides for fabricating the high performance and flexible nonvolatile memory devices through regulating the phase structure in the 2D nanosheets.     

Enhanced Photocarrier Generation with Selectable Wavelengths by M‐Decorated‐CuInS2 Nanocrystals (M = Au and Pt) Synthesized in a Single Surfactant Process on MoS2 Bilayers

A facile approach for the synthesis of Au‐ and Pt‐decorated CuInS₂ nanocrystals (CIS NCs) as sensitizer materials on the top of MoS₂ bilayers is demonstrated. A single surfactant (oleylamine) is used to prepare such heterostructured noble metal decorated CIS NCs from the pristine CIS. Such a feasible way to synthesize heterostructured noble metal decorated CIS NCs from the single surfactant can stimulate the development of the functionalized heterostructured NCs in large scale for practical applications such as solar cells and photodetectors. Photodetectors based on MoS₂ bilayers with the synthesized nanocrystals display enhanced photocurrent, almost 20–40 times higher responsivity and the On/Off ratio is enlarged one order of magnitude compared with the pristine MoS₂ bilayers‐based photodetectors. Remarkably, by using Pt‐ or Au‐decorated CIS NCs, the photocurrent enhancement of MoS₂ photodetectors can be tuned between blue (405 nm) to green (532 nm). The strategy described here acts as a perspective to significantly improve the performance of MoS₂‐based photodetectors with the controllable absorption wavelengths in the visible light range, showing the feasibility of the possible color detection.     

Anisotropic MoS2 Nanosheets Grown on Self‐Organized Nanopatterned Substrates

Manipulating the anisotropy in 2D nanosheets is a promising way to tune or trigger functional properties at the nanoscale. Here, a novel approach is presented to introduce a one‐directional anisotropy in MoS₂ nanosheets via chemical vapor deposition (CVD) onto rippled patterns prepared on ion‐sputtered SiO₂/Si substrates. The optoelectronic properties of MoS₂ are dramatically affected by the rippled MoS₂ morphology both at the macro‐ and the nanoscale. In particular, strongly anisotropic phonon modes are observed depending on the polarization orientation with respect to the ripple axis. Moreover, the rippled morphology induces localization of strain and charge doping at the nanoscale, thus causing substantial redshifts of the phonon mode frequencies and a topography‐dependent modulation of the MoS₂ workfunction, respectively. This study paves the way to a controllable tuning of the anisotropy via substrate pattern engineering in CVD‐grown 2D nanosheets.     

Rational Design of Nanoporous MoS2/VS2 Heteroarchitecture for Ultrahigh Performance Ammonia Sensors

2D transition metal dichalcogenides (TMDs) have received widespread interest by virtue of their excellent electrical, optical, and electrochemical characteristics. Recent studies on TMDs have revealed their versatile utilization as electrocatalysts, supercapacitors, battery materials, and sensors, etc. In this study, MoS₂ nanosheets are successfully assembled on the porous VS₂ (P‐VS₂) scaffold to form a MoS₂/VS₂ heterostructure. Their gas‐sensing features, such as sensitivity and selectivity, are investigated by using a quartz crystal microbalance (QCM) technique. The QCM results and density functional theory (DFT) calculations reveal the impressive affinity of the MoS₂/VS₂ heterostructure sensor toward ammonia with a higher adsorption uptake than the pristine MoS₂ or P‐VS₂ sensor. Furthermore, the adsorption kinetics of the MoS₂/VS₂ heterostructure sensor toward ammonia follow the pseudo‐first‐order kinetics model. The excellent sensing features of the MoS₂/VS₂ heterostructure render it attractive for high‐performance ammonia sensors in diverse applications.     

Surface Engineering of MoS2 via Laser‐Induced Exfoliation in Protic Solvents

With excellent performance in the hydrogen evolution reaction (HER), molybdenum disulfide (MoS₂) is considered a promising nonprecious candidate to substitute Pt‐based catalysts. Herein, pulsed laser irradiation in liquid is used to realize one‐step exfoliation of bulk 2H‐MoS₂ to ultrastable few‐layer MoS₂ nanosheets. Such prepared MoS₂ nanosheets are rich in S vacancies and metallic 1T phase, which significantly contribute to the boosted catalytic HER activity. Protic solvents play a pivotal role in the production of S vacancies and 2H‐to‐1T phase transition under laser irradiation. MoS₂ exfoliated in an optimal solvent of formic acid exhibits outstanding HER activity with an overpotential of 180 mV at 10 mA cm^?2 and Tafel slope of 54 mV dec^?1.     

Preparation and Tribological Properties of MoS2 Nanosheets

MoS₂ nanosheets were successfully synthesized by a micro‐domain reaction method, employing a ball‐milled mixture of MoO₃ and S as starting materials. The obtained MoS₂ nanosheets are monodisperse, and the length and width are about 100 and 10 nm, respectively. Furthermore, the tribological performances of the as‐obtained MoS₂ nanosheets were studied and possible optimized mechanisms were also proposed.     

Strong Coupling of MoS2 Nanosheets and Nitrogen‐Doped Graphene for High‐Performance Pseudocapacitance Lithium Storage

Layered material MoS₂ is widely applied as a promising anode for lithium‐ion batteries (LIBs). Herein, a scalable and facile dopamine‐assisted hydrothermal technique for the preparation of strongly coupled MoS₂ nanosheets and nitrogen‐doped graphene (MoS₂/N‐G) composite is developed. In this composite, the interconnected MoS₂ nanosheets are well wrapped onto the surface of graphene, forming a unique veil‐like architecture. Experimental results indicate that dopamine plays multiple roles in the synthesis: a binding agent to anchor and uniformly disperse MoS₂ nanosheets, a morphology promoter, and the precursor for in situ nitrogen doping during the self‐polymerization process. Density functional theory calculations further reveal that a strong interaction exists at the interface of MoS₂ nanosheets and nitrogen‐doped graphene, which facilitates the charge transfer in the hybrid system. When used as the anode for LIBs, the resulting MoS₂/N‐G composite electrode exhibits much higher and more stable Li‐ion storage capacity (e.g., 1102 mAh g^?1 at 100 mA g^?1) than that of MoS₂/G electrode without employing the dopamine linker. Significantly, it is also identified that the thin MoS₂ nanosheets display outstanding high‐rate capability due to surface‐dominated pseudocapacitance contribution.     

Preparation and ethanol sensing properties of the superstructure SnO2/ZnO composite via alcohol-assisted hydrothermal route

Self-assembled superstructure of SnO₂/ZnO composite was synthesized by using alcohol-assisted hydrothermal method gas sensing properties of the material were investigated by using a static test system. The structure and morphology of the products were characterized by X-ray diffraction (XRD) and field-emission scanning electron microscope (FE-SEM). The diameter of the SnO₂ nanorods was about 40 nm with a length of about 300 nm, SnO₂ nanorods and ZnO nanosheets interconnect each other to form a superstructure. The gas sensing properties of superstructure SnO₂/ZnO composite with different content of ZnO were investigated. Furthermore, the superstructure SnO₂/ZnO composite sensor is characterized at different operating temperatures and its long-term stability in response to ethanol vapor is tested over a period of 3 months.     

Structure Engineering of MoS2 via Simultaneous Oxygen and Phosphorus Incorporation for Improved Hydrogen Evolution

Oxygen and phosphorus dual‐doped MoS₂ nanosheets (O,P‐MoS₂) with porous structure and continuous conductive network are fabricated using a one‐pot NaH₂PO₂‐assisted hydrothermal approach. By simply changing the precursor solution, the chemical composition and resulting structure can be effectively controlled to obtain desired properties toward the hydrogen evolution reaction (HER). Thanks to the beneficial structure and strong synergistic effects between the incorporated oxygen and phosphorus, the optimal O,P‐MoS₂ exhibit superior electrocatalytic performances compared with those of oxygen single‐doped MoS₂ nanosheets (O‐MoS₂). Specifically, a low HER onset overpotential of 150 mV with a small Tafel slope of 53 mV dec^?1, excellent conductivity, and long‐term durability are achieved by the structural engineering of MoS₂ via O and P co‐doping, making it an efficient HER electrocatalyst for water electrocatalysis. This work provides an alternative strategy to manipulate transition metal dichalcogenides as advanced materials for electrocatalytic and related energy applications.     

Polarized Light‐Emitting Diodes Based on Patterned MoS2 Nanosheet Hole Transport Layer

Here, this study successfully fabricates few‐layer MoS₂ nanosheets from (NH₄)₂MoS₄ and applies them as the hole transport layer as well as the template for highly polarized organic light‐emitting diodes (OLEDs). The obtained material consists of polycrystalline MoS₂ nanosheets with thicknesses of 2 nm. The MoS₂ nanosheets are patterned by rubbing/ion‐beam treatment. The Raman spectra shows that {poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole), poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐(benzo[2,1,3]thiadiazol‐4,8‐diyl)]} (F8BT) on patterned MoS₂ exhibits distinctive polarization behavior. It is discovered that patterned MoS₂ not only improves the device efficiency but also changes the polarization behavior of the devices owing to the alignment of F8BT. This work demonstrates a highly efficient polarized OLED with a polarization ratio of 62.5:1 in the emission spectrum (166.7:1 at the peak intensity of 540 nm), which meets the manufacturing requirement. In addition, the use of patterned MoS₂ nanosheets not only tunes the polarization of the OLEDs but also dramatically improves the device performance as compared with that of devices using untreated MoS₂.     

Ionic‐Activated Chemiresistive Gas Sensors for Room‐Temperature Operation

The development of high performance gas sensors that operate at room temperature has attracted considerable attention. Unfortunately, the conventional mechanism of chemiresistive sensors is restricted at room temperature by insufficient reaction energy with target molecules. Herein, novel strategy for room temperature gas sensors is reported using an ionic‐activated sensing mechanism. The investigation reveals that a hydroxide layer is developed by the applied voltages on the SnO₂ surface in the presence of humidity, leading to increased electrical conductivity. Surprisingly, the experimental results indicate ideal sensing behavior at room temperature for NO₂ detection with sub‐parts‐per‐trillion (132.3 ppt) detection and fast recovery (25.7 s) to 5 ppm NO₂ under humid conditions. The ionic‐activated sensing mechanism is proposed as a cascade process involving the formation of ionic conduction, reaction with a target gas, and demonstrates the novelty of the approach. It is believed that the results presented will open new pathways as a promising method for room temperature gas sensors.