Numerical simulation of an explosive plasma generator in the gasdynamic approximation

A two-dimensional gasdynamic model of a plasma generator is proposed. A numerical solution of the problem is obtained, and peculiarities of the gasdynamic flow are considered. Results are compared with experiment.Notation T temperature - p pressure - N number of gas particles per unit volume - w gas mass velocity vector with components w_z=u and w_r=v - z axial coordinate - r radial coordinate - t time - E total specific energy of gas - specific internal energy - density - V plate velocity - E_in initial plate energy - M plate mass - S plate area - p pressure difference between left and right sides of plate - t, z, r time and space steps - k<1 Courant number - c velocity of sound in the gas Indices 0 initial value - * characteristic dimensional quantities - i, j grid cell indices along z and r - n number of time step - () symbol denoting intermediate values of gasdynamic variables in a time layer Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 37, No. 5, pp. 859–867, November, 1979.     

Simulation of the Process of Water Freezing in a Round Pipe

The problem of freezing of pure water in a round pipe is treated with due regard for convection under asymmetric thermal boundary conditions in the absence of motion along the pipe. The problem is solved numerically using the control volume approach, SIMPLER algorithm, and the enthalpy method. Results are obtained for three Grashof (Gr) and six Biot (Bi) numbers: Gr = 1.55 × 10⁶, Bi = 0.305 (0 < ), Bi = 0.044 ( < 2); Gr = 1.24 × 10⁷, Bi = 0.610 (0 < ), Bi = 0.087 ( < 2); Gr = 9.89 × 10⁷, Bi = 1.220 (0 < ), Bi = 0.174 ( < 2). The correctness of calculation of the problem disregarding free-convection flows is analyzed.     

The anomalous thermal boundary resistance in superfluid4He near Tλ

The anomalous thermal boundary resistance R of superfluid⁴He near the lambda point T was studied in a cell with parallel copper faces and with various fluid layer thicknesses. The study was made as a function of the heat current Q and reduced temperature (T — T)/T = . In all cases, R tends to a maximum value R_itmax at T = T. This value is independent of Q, and is reproducible for various experiments. This contrasts with the regular boundary resistance which can vary considerably between successive experiments. Near T, the limiting slope dR/d¦¦ is found to be proportional to Q^–1, and this leads to a scaled representation of the data. This analysis is extended to data of similar experiments with gold plated copper surfaces by Duncan and Ahlers and by Zhong et al. The measurements of R over the whole range of¦¦ where it is observable are discussed and compared with previous experiments.     

The effect of Ag additions on the microstructure of aluminium–lithium alloys

Minor quantities of Ag have been added to Al–Li–Cu–Mg–Zr alloys. Their microstructure has been studied by means of optical metallography, transmission electron microscopy and X-ray diffraction. In the high Li, low Cu : Mg ratio alloys the main phases found were , , S and T₁, while fewer T₂ and Al₇Cu₂Fe precipitates were also observed. The addition of up to 0.5 wt% Ag diminishes the and T₁ precipitates size. This is attributed to a small increase of Li solubility in the matrix. In the low Li, high Cu : Mg ratio alloy the addition of 0.2 wt % Ag resulted in the precipitation of phase simultaneously with , , S and T₁ phases. Due to the low Li concentration an unusual growth of the / precipitates at the expense of the precipitates was also observed.     

Dependence of helium II viscosity properties on oscillation frequency

The causes of a discrepancy in the results of measurements of He II viscosity below T 1.6 k obtained with different measurement methods are investigated. It is shown that to obtain correct results in oscillation experiments, the condition _ph should obtain, where is the depth of viscous wave penetration and _ph is the phonon free path length. Results of viscosity measurements at different ratios /_ph (by a wire viscometer) are presented. It is shown that for the condition _ph, the results obtained are in good agreement with the results of Andronikashvili (in which /_ph > 100). If the mentioned relation is not satisfied, then, as the value of the ratio /_ph is decreased, the value measured for the viscosity is increasingly lower than the results of Andronikashvili.     

Behaviour of the complex dielectric function and energy loss spectrum of copper in the [110] direction in the energy range 2 < ħω ⩽ 4 Rydberg

The complex wave vector- and frequency-dependent dielectric function, (q,) = ₁ (q,) + ₂ (q,), for copper is calculated using realistic band energies and wave functions. The Bloch states _bk (r) are obtained from the modified augmented plane wave method (MAPW) with the Chodorow potential. Results are presented for the principal direction ofq, [110]. About 70 bands and 60 plane waves at 10k-points in the 1/48th of the Brillouin zone are considered. An additional peak was found at the energy loss spectrum of copper whose centre is situated near 2.1 Rydberg, its centre moves gradually to the high energy side with increasing |q|. According to our knowledge, it is the first time this result has been calculated theoretically or even measured experimentally in the [110] direction for copper.     

Nonlinear asymptotic theory of hypersonic flow past a circular cone

Summary The hypersonic small-disturbance theory is reexamined in this study. A systematic and rigorous approach is proposed to obtain the nonlinear asymptotic equation from the Taylor-Maccoll equation for hypersonic flow past a circular cone. Using this approach, consideration is made of a general asymptotic expansion of the unified supersonic-hypersonic similarity parameter together with the stretched coordinate. Moreover, the successive approximate solutions of the nonlinear hypersonic smalldisturbance equation are solved by iteration. Both of these approximations provide a closed-form solution, which is suitable for the analysis of various related flow problems. Besides the velocity components, the shock location and other thermodynamic properties are presented. Comparisons are also made of the zeroth-order with first-order approximations for shock location and pressure coefficient on the cone surface, respectively. The latter (including the nonlinear effects) demonstrates better correlation with exact solution than the zeroth-order approximation. This approach offers further insight into the fundamental features of hypersonic small-disturbance theory.Notation a speed of sound - H unified supersonic-hypersonic similarity parameter, - K hypersonic similarity parameter, M - M freestream Mach number - P pressure - T temperature - S entropy - u, v radial, polar velocities - V freestream velocity - shock angle - cone angle - density - density ratio, /() - ratio of specific heats - polar angle - stretched polar angle, / - (), (), () gage functions     

Bounding-surface plasticity: Stress space versus strain space

Summary A bounding-surface plasticity model is formulated in stress space in a general enough manner to accommodate a considerable range of hardening mechanisms. Conditions are then established under which this formulation can be made equivalent to its strain-space analogue. Special cases of the hardening law are discussed next, followed by a new criterion to ensure nesting. Finally, correlations with experimental data are investigated.Notation (a) centre of the stress-space (strain-space) loading surface; i.e., backstress (backstrain) - ^* (a ^*) centre of the stress-space (strain-space) bounding surface - (a ) target toward which the centre of the stress-space (strain-space) loading surface moves under purely image-point hardening - (b) parameter to describe how close the loading surface is to nesting with the bounding surface in stress (strain) space; see (H10) - (c) elastic compliance (stiffness) tensor - (d) parameter to describe how close the stress (strain) lies to its image point on the bounding surface; see (H10) - (D) generalised plastic modulus (plastic compliance); see (1) - function expressing the dependence of the generalised plastic modulus on (plastic complianceD ond) - ^* (D ^*) analogue to (D) for the bounding surface - function expressing the dependence of ^* on (D ^* ond) - () strain (stress) - ' (') deviatoric strain (stress) - ^P ( ^R ) plastic strain (stress relaxation); see Fig. 1 - () image point on the bounding surface corresponding to the current strain (stress) - _iso (f _iso) at the point of invoking consistency, the fraction of local loading-surface motion arising from a change of radius; i.e., fraction of isotropic hardening in the stress-space theory - _kin (f _kin) at the point of invoking consistency, the fraction of local loading-surface motion arising from a change in the backstress (backstrain); i.e., fraction of kinematic hardening in the stress-space theory - _nor (f _nor) at the point of invoking consistency, the fraction of backstress (backstrain) motion directed toward the image stress (strain); i.e., the image-point fraction of the kinematic hardening in the stress-space theory - _ima (f _ima) at the point of invoking consistency, the fraction of backstress (backstrain) motion directed toward the image stress (strain); i.e., the image-point fraction of the kinematic hardening in the stress-space theory - function relating _iso to , , and (f _iso tob,d, andl) - function relating _kin to , , and (f _kin onb,d, andl) - function relating _nor to , , and (f _nor onb,d, andl) - function relating _ima to , , and (f _ima onb,d, andl) - the fraction of outwardly normal bounding-surface motion at the Mróz image point which arises from a change of radius - the fraction of outwardly normal bounding-surface motion at the Mróz image point which arises from a change in the centre - function relating _iso ^* to (f _iso ^* tod) - function relating _kin ^* to (f _kin ^* tod) - (l) parameter to describe the full extent of plastic loading up to the present, giving the arc length of plastic strain (stress relaxation) trajectory; see (H10) - function relating the direction for image-point translation of the loading surface to various other tensorial directions associated with the current state; see (H5). With 6 Figures     

γ ? α2 Phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%)

The ₂ phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%) alloy has been studied by analytical electron microscopy. ₂ and phases were found at grain boundaries. ₂ layers that suspended in layers and interfacial ledge higher than 2d ₍₁₁₁₎ at /₂ interfaces were observed in the lamellar grains. These facts indicated that ₂ phase transformation and dynamic recrystallization have occurred during high temperature stress rupture deformation. It can be concluded that deformation induced ₂ phase transformation and dynamic recrystallization resulted in the presence of particles at grain boundaries. A structural and compositional transition area between deformation-induced ₂(or ) and its adjacently original (or ₂) phases was found by HREM and EDS and is suggested as a way to transform between and ₂ phase during high temperature stress rupture deformation. The transition area was formed by slide of partial dislocations on close-packed planes and diffusion of atoms.     

Study of dielectric and electrical properties of mortar in the early hydration period at microwave frequencies

The dielectric constant, , and electrical conductivity, , of mortars with various sand-cement ratios,s/c, were measured for the first 30 h hydration using microwave techniques in the frequency range 8.2–12.4 GHz. The and of the mortars were found to increase linearly with increasing water-solid ratiow/(s + c), but decrease with increasings/c. It was found that as long as thes/c values were the same, the rate of changes in and of the mortars were the same. It appears that thes/c is the key factor controlling the rates of changes in dielectric and electrical parameters of cement hydration in mortar. The relationship between compressive strength and dielectric and electrical properties of mortars was also discussed.     

An effective finite element modeling/analysis approach for dynamic thermoelasticity due to second sound effects

Of interest here are dynamic thermoelastic problems influenced by second sound effects. In this regard, the effect of the so called heat waves on solid continua is investigated employing a unified explicit computational architecture which uses the finite element method. The approach is robust and effective for transient interdisciplinary thermal-structural modeling/analysis. The non-classical relaxation model of Green and Lindsay (1972) involving two relaxation times is employed in the present work. Numerical simulations relevant to thermal shock problems in an elastic half-space are described for stainless steel via two different illustrative test cases.     

The Possibility of Reproducing the Units of Complex Permittivity at High Frequencies

The results of theoretical investigations of the reproduction of the units of the components of complex permittivity and by a method based on the use of the wave properties of a coaxial line are presented. The errors in reproducing and are analyzed.     

An instability mechanism for the sliding motion of finite depth of bulk granular materials

Summary Field observations and experimental records indicate that the primary mode of motion of many large landslides is that ofsliding rather thanflowing. Most of shear during sliding is concentrated at the base of slides, with little or no mixing taking place away from the base. This sliding motion may generate strong pressure waves at the interface between the quasi-static deforming granular mass and the grain-inertia dominated rapid granular flow, thus inducing a Kelvin-Helmholtz type instability mechanism for large landslides. The existence of a transitional zone in granular flow is essential for the generation of this type of instability waves. A model using a finite depth of elastic sliding bulk granular materials riding on a basal granular shear flow layer is estabilished to represent the sliding motion of these large volume of bulk granular materials. The balance and the stability of this sliding system are investigated under the perturbation of internal pressure waves. The generated instability waves will force favorable phase shifts between the overburden pressure and the sliding velocity, leading to a net reduction in the total power loss due to friction. The depth of sliding mass will affect the generation of this type of instability waves. Both analytical and numerical results show that smaller depth slides can induce stronger instability waves than larger depth slides do.Notation a perturbation wave amplitude - C nondimensional instability wave speed - C _i growth rate, the imaginary part ofC - C _r wave phase speed, the real part ofC - c _p compressional wave speed in elastic medium - c _s shear wave speed in elastic medium - D nondimensional depth of sliding mass - d depth of sliding mass - G shear modulus of elastic medium - H nondimensional basal depth - h depth of basal shear zone - i - K Coulomb friction coefficient - P _xx, P_yy lateral and normal pressures in granular material, respectively - P _xy shear stress in granular material - p ₀ amplitude of perturbation pressure - p _yy perturbation pressure - r nondimensional complex wave number of instability wave - S nondimensional wave number of shear wave - t time scale - U uniform sliding velocity of a landslide inx direction - u, v velocities inx direction andy direction, respectively - u ₀ granular flow velocity in the basal shear zone - V, V _c nondimensional sliding velocity and its critical velocity, respectively - W power loss to friction - internal friction angle - , Lame's potentials, and are time-independent amplitudes of and , respectively - perturbation wave surface profile - wave number of perturbation wave, _r and _i are the real and imaginary parts of - Poisson's ratio of elastic medium - wave frequency of perturbation wave - , _g density of granular material - stress component in elastic medium - Rankine's earth pressure coefficient - -K ² - Re{}, Im{} the real and imaginary parts of complex quantity inside {}, respectively - , the divergence and the curl of perturbation wave velocities, respectively - Laplacian operator - _ij Kronecker delta; _ij =1 fori=j, _ij =0 forij - ()i, ()j, ()ij tensor - ()1, ()e in sliding mass - ()2, ()b in ground     

Rapidly solidified nickel-base superalloys

The structures of rapidly solidified APK1, In 100 and low-carbon In 792 are described and compared with that of Nimonic 80A. Under identical processing conditions, cellular, dendritic and homogeneous equiaxed structures can be obtained. This is not due to either the influence of cooling conditions or to any single alloying addition, but depends on the combined effects of the Ti, Cr and C contents. The spinodal-type formation of , proposed for Nimonic 80A, cannot be suppressed in these alloys by pendant drop melt extraction or melt spinning techniques. However, detailed atom-probe field-ion microscopy suggests that the formation in APK1 does develop by a similar mechanism. Although not directly attributable to a modulated microstructure or to the presence of disordered particles, the extremely high strength levels observed in this alloy after heat treatment are due to the subsequent development of small, ordered, precipitates in a fine-grained matrix, together with the absence of deleterious grain boundary carbide precipitation.     

Mathematical modelling of long ocean waves with a discontinuous density gradient

A mathematical model for studying the propagation of long internal ocean waves of finite amplitude is proposed. The vertical structure of the pressure perturbation is investigated and reduced to a Sturm–Liouville eigenvalue problem. In the continuous stratification case, the pattern of this vertical structure depends on the choice of the characteristic scale of a varying stratification parameter, denoted by . As this parameter asymptotically approaches a critical value (i.e. _cri), the amplitudes of the solution's normal modes increase considerably. The internal waves break and produce an unstable interface, which degenerates into a turbulent mixed layer. These conditions correspond to the critical state of wave existence. When < _cri a three-layer discontinuous gradient model is proposed to resolve the problem. It consists in specifying one solution within a thin intermediary layer and two solutions on either side of this layer. The results show that the use of appropriately matching interfacial conditions allows to obtain generally matching solutions, even for small values of the nonconstant stratification parameter .     

Surface waves in a rotating fluid due to sources and internal boundaries

Summary The problem of surface waves generated by an oscillatory point source oscillating with frequency in a fluid rotating with constant angular velocity has been investigated. The Green's function solution is obtained for an unbounded region and a region bounded internally by a circular cylinder using an appropiate Fourier transform. It is seen that in the case when >2, the surface waves are similar to the ones existing in a potential flow but when <2, the surface waves correspond to the inertial waves which are generated entirely due to rotation and have no counterpart in a non-rotating fluid motion.

---

Oberflächenwellen in einer rotierenden Flüssigkeit als Folge von Quellen und Randbedingungen

Zusammenfassung Es wird das Problem der Erzeugung von Oberflächenwellen durch eine oszillierende Punktquelle (Frequenz ) in einer rotierenden Strömung (Winkelgeschwindigkeit ) untersucht. Die Greensche Funktion wird für einen unbegrenzten Bereich sowie für das Äußere eines Kreiszylinders durch eine geeignete Fouriertransformation hergeleitet. Für >2 sind die Oberflächenwellen ähnlich denen einer Potentialströmung, für <2 ergeben sich Wellen, die vollständig durch die Drehbewegung bedingt sind und die kein Gegenstück im nichtrotierenden Fall besitzen.

     

Radiation of internal waves during vertical motion of a body through a nonuniform liquid

Energy losses to radiation of internal waves during the vertical motion of a point dipole in two-dimensional and three-dimensional cases are computed.Notation _o(z), p_o(z) density and pressure of the ground state - z vertical coordinate - v, p, perturbed velocity, pressure, and density - H(d 1n _o/dz)^–1 characteristic length scale for stratification - N=(gH^–1–g²c _o ^–2 )^1/2 Weisel-Brent frequency - g acceleration of gravity - c_o speed of sound - vertical component of the perturbed velocity - V vector operator - k wave vector - frequency - d vector surface element - W magnitude of the energy losses - (t), (r) (x)(y)(z) Dirac functions - v_o velocity of motion of the source of perturbations - d dipole moment of the doublet - _o,l length dimension parameters - _o intensity of the source Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 4, pp. 619–623, October, 1980.     

Stagnation flow and heat transfer in a zonal magnetic field

Summary The problem stated in the title is studied for small values of the diffusivity ratio and the magnetic force coefficient , the magnetic field being of internal origin. Uniformly valid expansions are derived for the velocity and magnetic fields in the fluid. It is found that as 1, the viscous layer is brought to rest and the current in the layer is uniform and normal to the wall.The heat transfer is next calculated at a uniformly heated wall on the assumption of small temperature variations. It is deduced that when log(^–1) approaches a certain value depending on the wall temperature etc., the thermal boundary layer separates at the stagnation point and, if dissipation is neglected, along the whole wall.     

Effect of annealing on the structural and electrical properties of In2Te3

Amorphous In2Te3 was prepared in both bulk form, by quenching the molten material, and thin-film form, by the thermal evaporation technique. X-ray diffraction analysis showed that the prepared samples in bulk and as-deposited thin-film forms were in the amorphous state. - and -phases of In2Te3 were prepared by annealing bulk samples at 615 and 813 K, respectively. Films annealed at 573 K give -phase polycrystalline structure. The electrical conductivity for the as-deposited In2Te3 films increases with increasing film thickness. The conduction activation energy, E, of the as-prepared bulk and thin film samples were found to be 0.516 and 0.521 eV. The corresponding values of room-temperature electrical conductivity, RT, for these samples are 1.1×10-6 and 7.15×10-7-1m-1, respectively. The observed change in the value of RT may be due to the difference in the structure of bulk and thin-film samples. The increase of E with annealing temperature for both bulk and thin-film samples is interpreted in terms of the density of states model proposed by Mott and Davis. © 1998 Chapman & Hall     

Evaluation of the true activation enthalpy of superplastic flow including a threshold stress

A new method is suggested for the evaluation of the true activation enthalpy for alloys where the strain rate of the superplastic flow varies with a power of an effective stress _e = -_o, where and _o are the applied stress and a threshold stress, respectively. Some earlier results concerning superplastic AlMgZnCu alloys containing chromium and in which a strongly temperature-dependent threshold stress can be revealed, are reanalysed. The results are in good agreement with the previous ones. It has been shown further that for the alloys investigated the true activation energy increases with increasing chromium content.