Thermal Decomposition of Molecular Materials {\{{\rm N}(n{-}{\rm C}_{4}{\rm H}_{9})_{4}[{\rm M}^{\rm II} {\rm Fe}^{\rm III}({\rm C}_{2} {\rm O}_{4})_{3}]\}_{\infty},\,{\rm M}^{\rm II} = {\rm Zn},\, {\rm Co},\, {\rm Fe}}

Thermal decomposition of oxalate-based molecular precursors, namely ${\{{\rm N}(n{-} {\rm C}_{4} {\rm H}_{9})_{4}[{\rm Zn}^{\rm II}{\rm Fe}^{\rm III}({\rm C}_{2} {\rm O}_{4})_{3}]\}_{\infty}, \{{\rm N}(n{-}{\rm C}_{4}{\rm H}_{9})_{4}[{\rm Co}^{\rm II}{\rm Fe}^{\rm III}({\rm C}_{2}{\rm O}_{4})_{3}]\}_{\infty}}$ , and ${\{{\rm N}(n{-}{\rm C}_{4} {\rm H}_{9})_{4}[{\rm Fe}^{\rm II}{\rm Fe}^{\rm III}({\rm C}_{2}{\rm O}_{4})_{3}]\}_{\infty}}$ , abbreviated as BuZnFe, BuCoFe, and BuFeFe, respectively, are studied using thermogravimetry (TG) in the temperature range from ~300?K to ~675?K at multiple heating rates. This study also deals with how the thermal decomposition of the complexes proceed stepwise through a series of intermediate reactions. The effect of the divalent metal M^II on the nature of thermal decomposition of the complexes, reflected in their TG profiles in terms of number of steps involved, is reported in this study. The temperature range of thermal decomposition steps for BuZnFe, BuCoFe, and BuFeFe with the same heating rates are studied systematically. Two different isoconversional methods, namely an improved iterative method and a model-free method are employed to calculate the kinetic parameters, and thus the most probable reaction mechanism of thermal decomposition is determined. Based on kinetic parameters, the important thermodynamic parameters such as the changes of entropy, enthalpy, and Gibbs free energy are estimated for the activated complex formation from the precursors. Considering the mass loss during the different thermal decomposition steps of BuZnFe, BuCoFe, and BuFeFe, observed in the thermogravimetry profiles, the overall reactions of the thermal decompositions are demonstrated.     

Electro-optical properties,decomposition pathways and the hydrostatic pressure-dependent behaviours of a double-cation hydrogen storage material of $$\hbox {Al}_{3}\hbox {Li}_{4}(\hbox {BH}_{4})_{13}$$

Electro-optical properties, the decomposition pathways and the pressure-dependent behaviours of \(\hbox {Al}_{3}\hbox {Li}_{4}(\hbox {BH}_{4})_{13}\) have been investigated using a first-principle plane-wave pseudopotential method. \(\hbox {Al}_{3}\hbox {Li}_{4}(\hbox {BH}_{4})_{13}\) is a kind of double-cation borohydride, consisting of distorted tetrahedral anions \([\hbox {Al}(\hbox {BH}_{4})_{4}]^{-}\) and cations \([\hbox {Li}_{4}(\hbox {BH}_{4})]^{3+}\), which obeys the stability criteria of decomposition reactions. Herein, two possible decomposition reactions of the compound are proposed, which release 18 hydrogen molecules (about 12.03 wt%) in the first reaction and 24 hydrogen molecules (about 16.04 wt%) in the second reaction. On increasing the pressure on the structure, the lattice parameter, the volume of unit cell, the quasiparticle band gap and also enthalpy of the system decrease nearly monotonically; therefore, the acceptor levels gradually get filled and the Fermi level shifts upward. Results of computational investigations of the structural, electronic and thermodynamic parameters and their pressure-dependent behaviours indicate that \(\hbox {Al}_{3}\hbox {Li}_{4}(\hbox {BH}_{4})_{13}\) has intriguing properties. Therefore, it would be a very promising material for hydrogen storage technology.     

Canadian Field Soils IV: Modeling Thermal Conductivity at Dryness and Saturation

The thermal conductivity data of 40 Canadian soils at dryness \((\lambda _{\mathrm{dry}})\) and at full saturation \((\lambda _{\mathrm{sat}})\) were used to verify 13 predictive models, i.e., four mechanistic, four semi-empirical and five empirical equations. The performance of each model, for \(\lambda _{\mathrm{dry}}\) and \(\lambda _{\mathrm{sat}}\), was evaluated using a standard deviation (SD) formula. Among the mechanistic models applied to dry soils, the closest \(\lambda _{\mathrm{dry}}\) estimates were obtained by MaxRTCM \((\textit{SD} = \pm ~0.018\,\hbox { Wm}^{-1}\cdot \hbox {K}^{-1})\), followed by de Vries and a series-parallel model (\(\hbox {S-}{\vert }{\vert }\)). Among the semi-empirical equations (deVries-ave, Advanced Geometric Mean Model (A-GMM), Chaudhary and Bhandari (C–B) and Chen’s equation), the closest \(\lambda _{\mathrm{dry}}\) estimates were obtained by the C–B model \((\pm ~0.022\,\hbox { Wm}^{-1}\cdot \hbox {K}^{-1})\). Among the empirical equations, the top \(\lambda _{\mathrm{dry}}\) estimates were given by CDry-40 \((\pm ~0.021\,\hbox { Wm}^{-1}\cdot \hbox {K}^{-1}\) and \(\pm ~0.018\,\hbox { Wm}^{-1}\cdot \hbox {K}^{-1}\) for18-coarse and 22-fine soils, respectively). In addition, \(\lambda _{\mathrm{dry}}\) and \(\lambda _{\mathrm{sat}}\) models were applied to the \(\lambda _{\mathrm{sat}}\) database of 21 other soils. From all the models tested, only the maxRTCM and the CDry-40 models provided the closest \(\lambda _{\mathrm{dry}}\) estimates for the 40 Canadian soils as well as the 21 soils. The best \(\lambda _{\mathrm{sat}}\) estimates for the 40-Canadian soils and the 21 soils were given by the A-GMM and the \(\hbox {S-}{\vert }{\vert }\) model.     

Effects of electrolyte concentration and current density on the properties of electro-deposited NiFeW alloy coatings

NiWP alloy coatings were prepared by electrodeposition, and the effects of ferrous chloride (\(\hbox {FeCl}_{2})\), sodium tungstate (\(\hbox {Na}_{2}\hbox {WO}_{4})\) and current density (\(D_{\mathrm{K}}\)) on the properties of the coatings were studied. The results show that upon increasing the concentration of \(\hbox {FeCl}_{2}\), initially the Fe content of the coating increased and then tended to be stable; the deposition rate and microhardness of coating decreased when the cathodic current efficiency (\(\eta \)) initially increased and then decreased; and for a \(\hbox {FeCl}_{2}\) concentration of \(3.6\, \hbox {g\,l}^{-1}\), the cathodic current efficiency reached its maximum of 74.23%. Upon increasing the concentration of \(\hbox {Na}_{2}\hbox {WO}_{4}\), the W content and microhardness of the coatings increased; the deposition rate and the cathode current efficiency initially increased and then decreased. The cathodic current efficiency reached the maximum value of 70.33% with a \(\hbox {Na}_{2}\hbox {WO}_{4}\) concentration of 50 g \(\hbox {l}^{-1}\), whereas the deposition rate is maximum at 8.67 \(\upmu \hbox {m}\,\hbox {h}^{-1}\) with a \(\hbox {Na}_{2}\hbox {WO}_{4}\) concentration of \(40\, \hbox {g\,l}^{-1}\). Upon increasing the \(D_{\mathrm{K}}\), the deposition rate, microhardness, Fe and W content of the coatings increased, the cathodic current efficiency increases first increased and then decreased. When \(D_{\mathrm{K}}\) was 4 A dm\(^{-2}\), the current efficiency reached the maximum of 73.64%.     

Effect of CTAB coating on structural,magnetic and peroxidase mimic activity of ferric oxide nanoparticles

In the present work, pristine and cetyl trimethyl ammonium bromide (CTAB)-coated ferric oxide nanoparticles \((\hbox {CTAB@Fe}_{2}\hbox {O}_{3} \hbox { NPs})\) were synthesized and studied as enzyme mimics. The w/w ratio of \(\hbox {Fe}_{2}\hbox {O}_{3}\) to CTAB was varied as 1:1 and 1:2. Transmission electron microscopic analysis revealed that pristine NPs had an average size of 50 nm, whereas the presence of CTAB resulted in the formation of nanorods with length of 130 nm. BET studies confirmed enhancement of surface area on CTAB coating, which was maximum for w/w ratio 1:1. The synthesized pristine NPs and CTAB-coated NPs were evaluated for their peroxidase mimic activity using o-dianisidine dihydrochloride as substrate. Optimum pH, temperature, substrate and NPs concentration for the reaction were 1, \(25^{\circ }{\mathrm{C}}\), \(0.16~\hbox {mg}~\hbox {ml}^{-1}\) and \(1~\hbox {mg}~\hbox {ml}^{-1}\), respectively. Peroxidase mimic activity of \(\hbox {CTAB@Fe}_{2}\hbox {O}_{3}\hbox { NPs}\) (w/w 1:1) was higher than that of pristine NPs. However, further increase in CTAB coating (w/w 1:2) resulted in lowering of peroxidase mimic activity. Kinetic analysis was carried out at optimized conditions; maximum velocity (\(V_{\mathrm{max}})\) and Michaelis constant (\(K_{\mathrm{m}})\) value of \(\hbox {CTAB@Fe}_{2}\hbox {O}_{3}\hbox { NPs}\) at 1:1 w/w ratio were 7.69 mM and \(1.12~\upmu \hbox {mol}~\hbox {s}^{-1}\), respectively.     

Electrical and Thermal Characteristics of the Insulator–Metal Transition in Crystalline $$\hbox {V}_{2}\hbox {O}_{5}$$ Films

The electrical and thermal properties with respect to the crystallization in \(\hbox {V}_{2}\hbox {O}_{5}\) thin films were investigated by measuring the resistance at different temperatures and applied voltages. The changes in the crystal structure of the films at different temperatures were also explored using Raman measurements. The thermal diffusivity of the crystalline \(\hbox {V}_{2}\hbox {O}_{5}\) film was measured by the nanosecond thermoreflectance method. The microstructures of amorphous and crystalline \(\hbox {V}_{2}\hbox {O}_{5}\) were observed by SEM and XRD measurements. The temperature-dependent Raman spectra revealed that a structural phase transition does not occur in the crystalline film. The resistance measurements of an amorphous film indicated semiconducting behavior, whereas the resistance of the crystalline film revealed a substantial change near \(250\,{^{\circ }}\hbox {C}\), and Ohmic behavior was observed above \(380\,{^{\circ }}\hbox {C}\). This result was due to the metal–insulator transition induced by lattice distortion in the crystalline film, for which \(T_{\mathrm{c}}\) was \(260\,{^{\circ }}\hbox {C}\). \(T_{\mathrm{c}}\) of the film decreased from 260 \({^{\circ }}\hbox {C}\) to \(230\,{^{\circ }}\hbox {C}\) with increasing applied voltage from 0 V to 10 V. Furthermore, the thermal diffusivity of the crystalline film was \(1.67\times 10^{-7}\,\hbox {m}^{2}\cdot \hbox {s}^{-1}\) according to the nanosecond thermoreflectance measurements.     

Microwave dielectrics: solid solution,ordering and microwave dielectric properties of $$(1{-}x)\hbox {Ba}(\hbox {Mg}_{1/3}\hbox {Nb}_{2/3})\hbox {O}_{3}{-}x\hbox {Ba(Mg}_{1/8}\hbox {Nb}_{3/4})\hbox {O}_{3}$$ ceramics

The effect of Ba(\(\hbox {Mg}_{1/8}\hbox {Nb}_{3/4})\hbox {O}_{3}\) phase on structure and dielectric properties of \(\hbox {Ba(Mg}_{1/3}\hbox {Nb}_{2/3})\hbox {O}_{3}\) was studied by synthesizing \((1{-}x)\hbox {Ba(Mg}_{1/3}\hbox {Nb}_{2/3})\hbox {O}_{3}{-}x\hbox {Ba}(\hbox {Mg}_{1/8}\hbox {Nb}_{3/4})\hbox {O}_{3}\) (\(x = 0\), 0.005, 0.01 and 0.02) ceramics. Superlattice reflections due to 1:2 ordering appear as low as \(1000^{\circ }\hbox {C}\). \(\hbox {Ba}(\hbox {Mg}_{1/3}\hbox {Nb}_{2/3})\hbox {O}_{3}\) forms solid solution with \(\hbox {Ba}(\hbox {Mg}_{1/8}\hbox {Nb}_{3/4})\hbox {O}_{3}\) for all ‘x’ values studied until \(1350^{\circ }\hbox {C}\). Ordering was confirmed by powder X-ray diffraction pattern, Raman study and HRTEM. Ceramic pucks can be sintered to density \({>}92\%\) of theoretical density. Temperature and frequency-stable dielectric constant and nearly zero dielectric loss (tan \(\delta \)) were observed at low frequencies (20 MHz). The sintered samples exhibit dielectric constant (\(\varepsilon _{\mathrm{r}})\) between 30 and 32, high quality factor between 37000 and 74000 GHz and temperature coefficient of resonant frequency (\(\tau _{\mathrm{f}})\) between 21 and \(24\hbox { ppm }^{\circ }\hbox {C}^{-1}\).     

Synthesis of Chevrel phase $$(\hbox {Cu}_{1.8}\hbox {Mo}_{6}\hbox {S}_{8})$$ in composite with molybdenum carbide for hydrogen evolution reactions

Sustainable hydrogen generation from water electrolysis using renewable energy sources is the most promising pathway for future energy and hydrogen economy. Here, the Chevrel phase \((\hbox {Cu}_{1.8}\hbox {Mo}_{6}\hbox {S}_{8})\) was synthesized in composite with \(\hbox {Mo}_{2}\hbox {C}\) and good hydrogen evolution activity in acidic media has been demonstrated. Bundles of nanowires were formed in the templated synthesis route. The composites were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy and elemental analysis. Detailed electrochemical analysis reveals that MCS-Cu50 composite exhibits higher hydrogen evolution reaction (HER) activity with \(71.4\,\hbox {mA}\,\mathrm{cm}^{-2}\) current density at an overpotential of 400 mV. It requires 250 mV overpotential to produce \(10\,\hbox {mA}\,\mathrm{cm}^{-2}\) current density for HER.     

Resistance-switching properties of Bi-doped $$\hbox {SrTiO}_{3}$$ films for non-volatile memory applications with different device structures

\(\hbox {SrTiO}_{3}\) and Bi-doped \(\hbox {SrTiO}_{3}\) films were fabricated with different device structures using the sol–gel method for non-volatile memory applications, and their resistance-switching behaviour, endurance and retention characteristics were investigated. \(\hbox {SrTiO}_{3}\) and \(\hbox {Sr}_{0.92}\hbox {Bi}_{0.08}\hbox {TiO}_{3}\) films grown on Si or Pt have the same phase structure, morphologies and grain size; however, the grain size of the \(\hbox {Sr}_{0.92}\hbox {Bi}_{0.08}\hbox {TiO}_{3}\) films grown on Si is slightly larger than those of the \(\hbox {SrTiO}_{3}\) films grown on Si and the \(\hbox {Sr}_{0.92}\hbox {Bi}_{0.08}\hbox {TiO}_{3}\) films grown on Pt. The \(\hbox {SrTiO}_{3}\) or \(\hbox {Sr}_{0.92}\hbox {Bi}_{0.08}\hbox {TiO}_{3}\) films grown on Si or Pt all exhibit bipolar resistive-switching behaviour and follow the same conductive mechanism; however, the \(\hbox {Ag}/\hbox {Sr}_{0.92}\hbox {Bi}_{0.08}\hbox {TiO}_{3}/\hbox {Si}\) device possesses the highest \(R_{\mathrm{HRS}}{/}R_{\mathrm{LRS}}\) of \(10^{5}\) and the best endurance and retention characteristics. The doping of Bi is conducive to enhance the \(R_{\mathrm{HRS}}{/}R_{\mathrm{LRS}}\) of the \(\hbox {SrTiO}_{3}\) films; meanwhile, the Si substrates help improve the endurance and retention characteristics of the \(\hbox {Sr}_{0.92}\hbox {Bi}_{0.08}\hbox {TiO}_{3}\) films.     

High-field ESR on Light-Induced Transition of Spin Multiplicity in FeCo Complex

Cyanide-bridged Fe-Co complex [Fe(Tp)(CN)₃]₂Co(bpe)?5H₂O (1?5H₂O; Tp = hydro-tris(pyrazolyl)borate; bpe = 1,2-bis(4-pyridyl)ethane) shows temperature- and light- induced metal-to-metal charge transfer (MMCT) involving spin state changes between magnetic $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ (HS = high spin, LS = low spin) state and nonmagnetic $\mathrm{Fe}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}$ state, while the dehydrated material 1 does not show any MMCT and holds $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ state. We have investigated the magnetic properties of each spin state in 1 and 1?5H₂O by means of magnetization and ESR measurement under pulsed high magnetic field. At low temperature below T _N, in both 1 and 1?5H₂O, the saturation magnetization in the induced ferromagnetic phase is well explained by S and g values derived from the magnetic susceptibility study. In the ESR of 1, we observed characteristic modes corresponding to a spin excitation in the induced ferromagnetic phase where its temperature dependence shows an evolution of spin correlation in the $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{HS}}$ state at low temperature. We further found that the similar ESR modes grow in the light-induced state of 1?5H₂O. The results strongly suggest that the light-induced magnetization in 1?5H₂O is driven by a light-induced MMCT, which involves transition of spin multiplicity from the nonmagnetic $\mathrm{Fe}^{\mathrm{II}}_{\phantom{\mathrm{II}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}$ to the magnetic $\mathrm{Fe}^{\mathrm{III}}_{\phantom{\mathrm{III}}\mathrm{LS}}\mbox{--}\mathrm{Co}^{\mathrm{II}}_{\phantom{\mathrm{\mathrm{II}}}\mathrm{HS}}$ pair.     

Rectifying resistance-switching behaviour of Ag/SBTO/STMO/$$\hbox {p}^{+}$$-Si heterostructure films

The \(\hbox {Sr}_{0.88}\hbox {Bi}_{0.12}\hbox {TiO}_{3}/\hbox {SrTi}_{0.92}\hbox {Mg}_{0.08}\hbox {O}_{3}\) (SBTO/STMO) heterostructure films were prepared on \(\hbox {p}^{+}\hbox {-Si}\) substrates by sol–gel spin-coating technique, and the films had good crystallinity and uniform grain distribution. The heterostructure films with a structure of Ag/SBTO/STMO/\(\hbox {p}^{+}\hbox {-Si}\) exhibited a bipolar, remarkable resistance-switching characteristic, and \(R_{\mathrm{HRS}}/R_{\mathrm{LRS}}\,\,{\sim }10^{4}\). More importantly, the heterostructure films showed rectifying characteristic in the low resistance state (LRS), and the rectification ratio can reach \(10^{2 }\) at \(\pm 1\hbox { V}\). The dominant resistive-switching conduction mechanism of high resistance state (HRS) was Ohmic behaviour, and the LRS changed to space charge-limited current (SCLC).     

High-pressure studies of superconductivity in $$\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}$$

\(\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}\) crystallizes in tetragonal CeOBiS\(_{2}\) structure (S. G. P4/nmm). We have investigated the effect of pressure on magnetization measurements. Our studies suggest improved superconducting properties in polycrystalline samples of \(\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}\). The \(T_{\mathrm{c}}\) in our sample is 5.3 K, at ambient pressure, which is marginal but definite enhancement over \(T_{\mathrm{c}}\) reported earlier (= 5.1 K). The upper critical field \(H_{\mathrm{c}2}\)(0) is greater than 3 T, which is higher than earlier report on this material. As determined from the M–H curve, both \(H_{\mathrm{c}2}\) and \(H_{\mathrm{c}1}\) decrease under external pressure P (0 \(\le P \le \) 1 GPa). We observe a decrease in critical current density and transition temperature on applying pressure in \(\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}\).     

Electrochemical impedance studies of capacity fading of electrodeposited ZnO conversion anodes in Li-ion battery

Electrodeposited ZnO coatings suffer severe capacity fading when used as conversion anodes in sealed Li cells. Capacity fading is attributed to (i) the large charge transfer resistance, \(R_{\mathrm{ct}}\) (300–700 \(\Omega \)) and (ii) the low \(\hbox {Li}^{+}\) ion diffusion coefficient, \(D_{\mathrm{Li}}^{+}\ (10^{-15}\) to \(10^{-13}\hbox { cm}^{2}\hbox { s}^{-1})\). The measured value of \(R_{\mathrm{ct}}\) is nearly 10 times higher and \(D_{\mathrm{Li}}^{+}\) 10–100 times lower than the corresponding values for \(\hbox {Cu}_{2}\hbox {O}\), which delivers a stable reversible capacity.     

Fabrication and enhanced photoluminescence properties of $$\hbox {NaLa}(\hbox {MoO}_{4})_{2}$$: $$\hbox {Sm}^{3+}$$Sm3+, $$\hbox {Bi}^{3+}$$Bi3+ phosphors with high efficiency white-light-emitting

The tetragonal scheelite-type \(\hbox {Sm}^{3+}\hbox {/Bi}^{3+}\) ions co-doped with \(\hbox {NaLa}(\hbox {MoO}_{4})_{2}\) phosphors were synthesized by a facile sol–gel and combustion process using citric acid as complexing agent. The crystal structure and morphology of these as-prepared samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Furthermore, UV-absorption and the photoluminescence (PL) properties of these phosphors were systematically investigated and the PL of the phosphors shows strong white light emissions. Efficient energy transfer from the \(\hbox {MoO}_{4}^{2-}\) group or \(\hbox {Bi}^{3+}\) ions to \(\hbox {Sm}^{3+}\) ions was established by PL investigation excited at 405 nm. The PL intensity of the studied materials was investigated as a function of different \(\hbox {Sm}^{3+}\) and \(\hbox {Bi}^{3+}\) concentrations. The PL investigations revealed that the phosphors exhibit apparent characteristic emissions, which is ascribed to the transition from the ground state energy level \(^{4}\hbox {G}_{5/2}\) to excited state energy levels \(^{6}\hbox {H}_{\mathrm{J}}\) (\(J= 5/2, 7/2, 9/2\)) and the \(\hbox {NaLa}(\hbox {MoO}_{4})_{2}\): 4 mol% \(\hbox {Sm}^{3+}\) and \(\hbox {NaLa}(\hbox {MoO}_{4})_{2}\): 4 mol% \(\hbox {Sm}^{3+}\), 8 mol% \(\hbox {Bi}^{3+}\) present white emissions with the CIE coordinates of (0.350, 0.285) and (0.285, 0.229), respectively. The absolute quantum efficiencies of the phosphors are 40% (\(\hbox {NaLa}(\hbox {MoO}_{4})_{2}\): 4 mol% \(\hbox {Sm}^{3+}\)) and 52% (\(\hbox {NaLa}(\hbox {MoO}_{4})_{2}\): 4 mol% \(\hbox {Sm}^{3+}\), 8 mol% \(\hbox {Bi}^{3+}\)), respectively.     

Thermal Diffusivity,Effusivity, and Conductivity of CdMnTe Mixed Crystals

\(\hbox {Cd}_\mathrm{1-x}\hbox {Mn}_\mathrm{x}\hbox {Te}\) mixed crystals belong to a class of materials called “semimagnetic semiconductor” or diluted magnetic semiconductor with the addition of magnetic ions such as \(\hbox {Mn}^{2+}\) implemented into the crystal structure. The crystals under investigation were grown from the melt by the high-pressure high-temperature modified Bridgman method in the range of composition \(0<\mathrm{x}<0.7\) . Thermal properties of these compounds have been investigated by means of photopyroelectric calorimetry in both back and front detection configurations. The values of the thermal diffusivity and thermal effusivity were derived from experimental data. The thermal conductivity of the specimens was calculated from the simple theoretical dependencies between thermal parameters. The influence of the Mn concentration on the thermal properties of \(\hbox {Cd}_\mathrm{1-x}\hbox {Mn}_\mathrm{x}\hbox {Te}\) crystals has been presented and discussed.     

Synthesis and Characterization of Nb Substitution on (Bi-Pb)-2223 Superconductors

In this study, samples of \(\hbox {Bi}_{1.65}\hbox {Pb}_{{ 0.35-x}}\hbox {Nb}_{{ x}}\hbox {Sr}_{2}\hbox {Ca}_{2}\hbox {Cu}_{3}\hbox {O}_{10+\delta }\) were prepared by solid-state reaction method and the effect of Nb substitution for Pb on the structural and superconducting properties of this material was investigated. The room-temperature X-ray diffraction patterns indicated that all the samples have the dominant phase of high-\({T}_{\mathrm{c}}\) (Bi-2223). However, other phases such as Bi-2212 and some impurity phases like \(\hbox {SrCu}_{2}\hbox {O}_{2}\), \(\hbox {CuNb}_{2}\hbox {O}_{6}\), \(\hbox {CaCuO}_{3}\) and CuO were also obtained from XRD patterns. An increasing amount of \(\hbox {Nb}^{+5}\) substitutions for \(\hbox {Pb}^{+2}\) led to a phase transition from Bi-2223 to Bi-2212. Electrical resistivity and magnetic measurements revealed that the critical temperature and the critical current density decreases with increasing Nb content due to the enhancement of Bi-2212 phase and appearance of impurities. SEM images indicated that samples porosity changes due to the disrupted grain growth with the substitution of Pb ions with Nb ions.     

Magnetic Properties of Nanocrystalline Nickel–Cobalt Ferrites (\mathrm{Ni}_{1/2}{\mathrm{{Co}}}_{1/2}{\mathrm{{Fe}}}_{2}{\mathrm{O}}_{4})

In this study, the nanocrystalline nickel–cobalt ferrites $(\mathrm{Ni}_{1/2}\mathrm{Co}_{1/2}\mathrm{Fe}_{2}\mathrm{O}_{4})$ were prepared via the citrate route method at $27\,^{\circ }\mathrm{C}$ . The samples were calcined at $300\,^{\circ }\mathrm{C}$ for 3 h. The crystalline structure and the single-phase formations were confirmed by X-ray diffraction (XRD) measurements. Prepared materials showed the cubic spinel structure with m3m symmetry and Fd3m space group. The analyses of XRD patterns were carried out using POWD software. It gave an estimation of lattice constant “ $a$ ” of 8.3584 Å, which was in good agreement with the results reported in JCPDS file no. 742081. The crystal size of the prepared materials calculated by Scherer’s formula was 27.6 nm and the electrical conductivity was around $10^{-5}~\mathrm{S}\,\cdot \, \mathrm{m}^{-1}$ . The permeability component variations with frequency were realized. The magnetic properties of the prepared materials were analyzed by a vibrating sample magnetometer (VSM). It showed a saturation magnetization of $27.26\,\mathrm{emu} \cdot \mathrm{m}^{-1}$ and the behavior of a hard magnet.     

Role of MnO in manganese–borate binary glass systems: a study on structure and thermal properties

Structural and thermal properties of \(x\hbox {MnO}-(100-x)\hbox {B}_{2}\hbox {O}_{3}\) (where \(x=40\), 50 and 60 mol%) glass samples have been investigated with the employment of various techniques. Fourier transform infrared spectroscopy results revealed the influence of MnO on glass matrix. Decrease of B–O bond-related band intensities has been observed. MnO addition was found to introduce broken [\(\hbox {BO}_{2}\hbox {O}^{-}\)]\(_{{n}}\) chains. Differential scanning calorimetry (DSC) measurements presented decreasing \(T_{\mathrm{g}}\) that indicates depolymerization of glass matrix in the considered compositional range. Moreover, thermal stability (TS) parameter has been evaluated using the DSC technique. It slightly decreased with MnO content. X-ray photoelectron spectroscopy results provided the evidence for \(\hbox {Mn}^{2+}\) and \(\hbox {Mn}^{3+}\) presence. Multiplet splitting, close to that of MnO, has been observed. It has been concluded that most of the manganese ions existed in the divalent state. Photoluminescence study revealed that manganese ions are tetragonally co-ordinated in a glassy matrix.     

Characterization and optical properties of $$\hbox {Pr}_{2}\hbox {O}_{3}$$-doped molybdenum lead-borate glasses

\(\hbox {Pr}^{3+}\) doped molybdenum lead-borate glasses with the chemical composition 75PbO?[25–(x \(+\) y)\(\hbox {B}_{2}\hbox {O}_{3}]\)–\(y\hbox {MoO}_{3}\)–\(x\hbox {Pr}_{2}\hbox {O}_{3}\) (where \(x = 0.5\) and 1.0 mol% and \(y = 0\) and 5 mol%) were prepared by conventional melt-quenching technique. Thermal, optical and structural analyses are carried out using DSC, UV and FTIR spectra. The physical parameters, like glass transition \((T_{\mathrm{g}})\), stability factor \((\Delta T)\), optical energy band gap \((E_{\mathrm{gopt}})\), of these glasses have been determined as a function of dopant concentration. The \({T}_{\mathrm{g}}\) and optical energy gaps of these glasses were found to be in the range of 290–350\({^{\circ }}\hbox {C}\) and 2.45–2.7 eV, respectively. Stability of the glass doped with \(\hbox {Pr}^{3+}\) is found to be moderate (\(\sim \)40). The results are discussed using the structural model of Mo–lead-borate glass.     

Preparation,characterization of chitosan/bamboo charcoal/poly(methacrylate) composite beads

Preparation and characterization of a low-cost, novel steam-activated bamboo charcoal (BC) and poly(methacrylate) (PMAA) bound with chitosan (CTS) to form chitosan/bamboo charcoal/poly(methacrylate) (CTS/BC/PMAA) composite beads is reported for the first time in this paper. The characteristics are revealed by techniques such as X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC), scanning electron microscopy (SEM), Brunauer Emmett Teller (BET), solution pH and pH at point of zero charge \((\hbox {pH}_{\mathrm {pzc}})\). The composite beads possessed a dominant acidic surface group of 0.663 mmol \(\hbox {g}^{\mathrm {-1}}\), as revealed by Boehm titration method. This acidity was confirmed by its solution pH of 6.46; \(\hbox {pH}_{\mathrm {pzc}}\) of 6.70 and increase in oxygen surface via XPS analysis. \(\hbox {N}_{\mathrm {2}}\) adsorption–desorption isotherms at 77 K of the beads revealed high BET surface area (SA) of 681.15 \(\hbox {m}^{\mathrm {2}}\hbox {g}^{\mathrm {-1}}\). Langmuir model affords a SA of 773.34 \(\hbox {m}^{\mathrm {2}}\hbox {g}^{\mathrm {-1}}\). SEM showed the microporous nature of the composite beads. The properties of CTS/BC/PMAA composite beads were compared to CTS/BC and neat BC. Thermal stability and successful coating of 5.1 wt% of PMAA and 6.8 wt% of CTS to CTS/BC/PMAA beads were shown by DSC and TGA analyses. The composite beads showed low carbon particle released at pH 7.4 and 6.8. Furthermore, dynamic adsorption revealed that CTS/BC/PMAA composite beads can be used to capture a polar substance, such as creatinine.