Enhanced electrocatalytic oxidation of methanol on Pd/polypyrrole–graphene in alkaline medium

The new electrocatalyst of Pd nanoparticles supported on polypyrrole-functionalized graphene (Pd/PPy–graphene) was reported. Microstructure, morphology and crystallinity of the synthesized materials were investigated by Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The elements of the composite were characterized using energy dispersive X-ray spectroscopy (EDS). The results showed that the polypyrrole-wrapped graphene support successfully discrete Pd nanoparticles with the crystallite size of about 6 nm. Catalyst activity for methanol electro-oxidation in fuel cells was investigated by cyclic voltammetry (CV) and chronoamperometry. The fundamental electrochemical test results indicated that the electrocatalytic activity of Pd/PPy–graphene is much better than that of commercial catalyst for methanol oxidation.     

The use of nitrogen-doped graphene supporting Pt nanoparticles as a catalyst for methanol electrocatalytic oxidation

Nitrogen-doped graphene (N-G) was prepared by thermal annealing of graphene oxide in ammonia at different temperatures. The resultant N-G was used as a conductive support for Pt nanoparticles (Pt/N-G) and the electrocatalytic activity of the Pt/N-G catalysts towards methanol oxidation was examined. To investigate the microstructure and morphology of the synthesized catalysts, X-ray diffraction, scanning and transmission electron microscopy and X-ray photoelectron spectroscopy were used. The catalytic activity of the catalysts towards the oxidation of methanol was evaluated by cyclic voltammetry. Compared to a control catalyst of Pt loaded on undoped graphene, the Pt/N-G materials show higher electrochemical activity towards methanol oxidation. The excellent electrochemical performance of Pt/N-G is mainly attributed to the nitrogen doping and the uniform distribution of Pt particles on the doped graphene support. These results indicate that N-doped graphene has great potential as a high-performance catalyst support for fuel cell electrocatalysis.     

Microwave-assisted one-pot synthesis of metal/metal oxide nanoparticles on graphene and their electrochemical applications

An effective synthesis strategy of hybrid metal (PtRu)/metal oxide (SnO₂) nanoparticles on graphene nanocomposites is developed using a microwave-assisted one-pot reaction process. The mixture of ethylene glycol (EG) and water is used as both solvent and reactant. In the reaction system for the synthesis of SnO₂/graphene nanocomposite, EG not only reduces graphene oxide (GO) to graphene, but also results in the formation of SnO₂ facilitated by the presence of a small amount of water. On the other hand, in the reaction system for preparation of PtRu/graphene nanocomposites, EG acts as solvent and reducing agent for reduction of PtRu nanoparticles from their precursors and reduction of graphene from graphene oxide. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) characterizations confirm the feasibility of the microwave-assisted reaction system to simultaneously reduce graphene oxide and to form SnO₂ or PtRu nanoparticles. The as-synthesized SnO₂/graphene hybrid composites show a much higher supercapacitance than the pure graphene, and the as-prepared PtRu/graphene show much better electrocatalytic activity for methanol oxidation compared to the commercial E-TEK PtRu/C electrocatalysts.     

Three-dimensional crumpled graphene-based platinum–gold alloy nanoparticle composites as superior electrocatalysts for direct methanol fuel cells

High performance of electrocatalysts for direct methanol fuel cells was demonstrated by three-dimensional (3D) graphene (GR) decorated with platinum (Pt)–gold (Au) alloy nanoparticles (3D-GR/PtAu). The 3D-GR/PtAu composite with a morphology like a crumpled paper ball was synthesized from a colloidal mixture of GR and Pt–Au alloy nanoparticles with aerosol spray drying. The 3D-GR/PtAu had a high specific surface area and electrochemical surface area of up to 238 and 325 m²/g(Pt), respectively, and the electrocatalytic applications of the 3D-GR/PtAu were examined through methanol oxidation reactions. The 3D-GR/PtAu had the highest electrocatalytic activity for methanol oxidation reactions compared with commercial Pt–carbon black and Pt-GR. The 3D-GR/PtAu was also highly sensitive electrocatalytic activity in the methanol oxidation reaction compared with the 2D-GR/Pt–Au. Furthermore, the electrocatalytic activity of the 3D-GR/PtAu had the highest performance among the catalysts containing Pt, Au, and GR for the methanol oxidation reactions. The increased electrocatalytic activity is attributed to the high specific surface area of the 3D formation and the effective surface structure of the Pt–Au alloy nanoparticles.     

The effect of Sn content on the electrocatalytic properties of Pt–Sn nanoparticles dispersed on graphene nanosheets for the methanol oxidation reaction

Direct methanol fuel cell (DMFC) electrode catalysts with improved electrochemical properties have been prepared by dispersing platinum–tin (Pt–Sn) nanoparticles onto graphene sheets. During the deposition, a majority of the oxygenated functional groups on the graphene oxide nanosheets were removed, resulting in the formation of graphene. Microstructural characterization shows that metallic Pt, Pt–Sn alloy and tin dioxide (SnO₂) nanoparticles were distributed on the graphene sheets, representing different lattice planes during the synthetic process. In terms of the electrocatalytic properties, graphene-supported Pt–Sn and graphene-supported Pt catalysts exhibited much higher current densities compared with that of commercial carbon black-supported Pt catalysts. Graphene-supported Pt–Sn increased the electrocatalytic activity, which is strongly influenced by the addition of Sn in its alloyed and oxidized forms, boosting the reaction more readily because of the lower oxidation potential.     

Graphene-supported platinum and platinum-ruthenium nanoparticles with high electrocatalytic activity for methanol and ethanol oxidation

In this study, Pt and Pt-Ru nanoparticles were synthesized on graphene sheets and their electrocatalytic activity for methanol and ethanol oxidation was investigated. Experimental results demonstrate that, in comparison to the widely-used Vulcan XC-72R carbon black catalyst supports, graphene-supported Pt and Pt-Ru nanoparticles demonstrate enhanced efficiency for both methanol and ethanol electro-oxidations with regard to diffusion efficiency, oxidation potential, forward oxidation peak current density, and the ratio of the forward peak current density to the reverse peak current density. For instance, the forward peak current density of methanol oxidation for graphene- and carbon black-supported Pt nanoparticles is 19.1 and 9.76 mA/cm², respectively; and the ratios are 6.52 and 1.39, respectively; the forward peak current density of ethanol oxidation for graphene- and carbon black-supported Pt nanoparticles is 16.2 and 13.8 mA/cm², respectively; and the ratios are 3.66 and 0.90, respectively. These findings favor the use of graphene sheets as catalyst supports for both direct methanol and ethanol fuel cells.     

Comparison of the electrocatalytic performance of PtRu nanoparticles supported on multi-walled carbon nanotubes with different lengths and diameters

To investigate the electrocatalytic performance of PtRu nanoparticles supported on multi-walled carbon nanotubes (MWCNTs) with different lengths and diameters, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry experiments were conducted. It is demonstrated that the length and diameter of MWCNTs play an important role in the electrocatalytic performance of PtRu catalysts. The co-existence of amorphous carbon impurities on the MWCNT10-2 support lowered the accessible surface area of the PtRu nanoparticles, hampered the dispersion of the PtRu nanoparticles, and induced the formation of a low degree of PtRu alloy, thus lowered the electrocatalytic performance of the PtRu/MWCNT10-2 catalyst for methanol oxidation. The highest mass-specific activity of PtRu/MWCNT3050-2 results from a highly accessible PtRu surface and a good dispersion of PtRu particles. Our experimental results also demonstrate that the tube length of MWCNT samples has little effect of the surface area specific activity of the PtRu/MWCNT catalyst, whereas the PtRu nanoparticles supported on the MWCNT samples with large tube diameter tends to exhibit a higher surface area specific activity for methanol oxidation reaction. This result is suggested to be the combined effects of a high degree of PtRu alloying and the high electronic conductivity of these MWCNT samples.     

Fabrication of Pt–Cu/RGO hybrids and their electrochemical performance for the oxidation of methanol and formic acid in acid media

Pt–Cu/reduced graphene oxide (Pt–Cu/RGO) hybrids with different Pt/Cu ratios were prepared by the reduction of H₂PtCl₆ and CuSO₄ by NaBH₄ in the presence of graphene oxide (GO). The Pt–Cu nanoparticles were characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The reduction of GO was verified by ultraviolet–visible absorption spectroscopy, Raman spectroscopy and X-ray photoelectron spectroscopy. Compared to Pt/RGO, the Pt–Cu/RGO hybrids have superior electrocatalytic activity and stability for the oxidation of methanol and formic acid. Thus they should have potential applications in direct methanol and formic acid fuel cells.     

Preparation of Pt Ag alloy nanoisland/graphene hybrid composites and its high stability and catalytic activity in methanol electro-oxidation

In this article, PtAg alloy nanoislands/graphene hybrid composites were prepared based on the self-organization of Au@PtAg nanorods on graphene sheets. Graphite oxides (GO) were prepared and separated to individual sheets using Hummer's method. Graphene nano-sheets were prepared by chemical reduction with hydrazine. The prepared PtAg alloy nanomaterial and the hybrid composites with graphene were characterized by SEM, TEM, and zeta potential measurements. It is confirmed that the prepared Au@PtAg alloy nanorods/graphene hybrid composites own good catalytic function for methanol electro-oxidation by cyclic voltammograms measurements, and exhibited higher catalytic activity and more stability than pure Au@Pt nanorods and Au@AgPt alloy nanorods. In conclusion, the prepared PtAg alloy nanoislands/graphene hybrid composites own high stability and catalytic activity in methanol electro-oxidation, so that it is one kind of high-performance catalyst, and has great potential in applications such as methanol fuel cells in near future.     

One-pot fabrication of FePt/reduced graphene oxide composites as highly active and stable electrocatalysts for the oxygen reduction reaction

FePt nanoparticles (NPs)/reduced graphene oxide (rG-O) composites have been synthesized using a one-pot strategy without surfactants. Monodisperse FePt NPs were homogenously loaded onto rG-O sheets. By controlling the concentration of dispersed graphene oxide (GO), uniform FePt flower-like nanoclusters can be obtained. FePt/rG-O composites exhibited exceptionally high electrocatalytic performance in the activity and durability for the oxygen reduction reaction (ORR), much superior to that of the commercial Pt/C (60%). The straightforward synthesis of FePt/rG-O composites provides a low-cost and high performance catalyst for the ORR, which is also a promising strategy for the synthesis of various Pt-based bimetallic alloy/rG-O composites for potential uses in catalysis and energy fields.     

Electro-oxidation of ethylene glycol on nanoporous Ti–Cu amorphous alloy

This work describes ethylene glycol (EG) electro-oxidation over nanoporous structure catalyst prepared by dealloying Ti–Cu amorphous alloy. Scanning electron microscopy (SEM) was used to characterize nanoporous catalysts. Electrocatalytic performances in acid and alkaline mediums were measured by cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). The results showed that nanoporous Ti–Cu amorphous alloy exhibited apparent electrocatalytic ability in terms of higher oxidation current in CV and CA curves comparing to raw Ti–Cu amorphous alloy. Electro-oxidation of EG took place more easily in alkaline medium than that in acid medium. In acid medium, heat treatment improved the electrocatalytic activity of nanoporous catalyst. In alkaline medium, heat treatment played an enhancing role below 0.1 V and a depressing role above 0.1 V. Possible electro-oxidation mechanism of EG was also discussed.     

镍负载二氧化钛/PEI/石墨烯纳米复合催化剂的制备与研究

首先采用改进的Hummers法制备了氧化石墨烯(GO),再以聚乙烯亚胺(PEI)修饰的氧化石墨烯为载体,并以硫酸钛和氯化镍为前驱体,利用水热法在180 ℃下以PEI为交联剂制得镍负载的TiO2/PEI/石墨烯纳米复合催化剂。通过紫外可见分光光度计(UV-vis)、傅里叶变换红外光谱(FTIR)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射仪(XRD)等测试手段对催化剂进行了表征。结果表明,Ni-TiO2/PEI/RGO纳米复合催化剂中镍负载TiO2纳米粒子与石墨烯能够均匀复合,并具有较小的晶粒尺寸。以对硝基苯酚(4-NP)为降解目标物,考察了该催化剂在NaBH4存在下还原4-NP的催化活性。结果表明,镍负载的TiO2/PEI/石墨烯纳米复合催化剂具有良好的重复催化活性,其降解率为98%,催化剂重复使用10次后,降解率仍能保持90%以上。     

One-pot synthesis of PdBi/reduced graphene oxide catalyst under microwave irradiation used for formic acid electrooxidation

The Pd and PdBi nanoparticles dispersed on the reduced graphene oxide (Pd/rGO and PdBi/rGO) have been synthesized through one-pot reaction under the irradiation of microwave and the obtained composites have been characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy, and their electrocatalytic activities have also been evaluated. It is found that the PdBi_0.05/rGO catalyst exhibits higher activity and better stability toward formic acid electrooxidation compared with Pd/C and Pd/rGO. The excellent electrocatalytic performance indicates that the addition of appropriate amount of Bi can greatly enhance the activity and stability of Pd catalysts for the formic acid oxidation.     

Electrocatalytic oxidation of methanol at 2-aminophenoxazin-3-one-functionalized multiwalled carbon nanotubes supported PtRu nanoparticles

A new process to prepare well-dispersed PtRu nanoparticles on 2-aminophenoxazin-3-one (APZ)-functionalized multiwalled carbon nanotubes (PtRu/APZ-MWCNTs) was reported. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectrometry (FT-IR), UV-vis absorption spectra as well as Raman spectra were used for the catalyst characterization. The Raman spectroscopic results reveal that APZ-functionalized MWCNTs has good integrity and electronic structure than MWCNTs treated with chemical acid. The composite catalyst shows excellent electrocatalytic activity toward methanol oxidation and appears as a promising candidate for use in direct methanol fuel cells. Cyclic voltammetry and chronoamperometry studies indicate that the PtRu/APZ-MWCNTs catalysts exhibited higher electrochemical active surface area, electrocatalytic activity and stability for the electro-oxidation of methanol as compared to that of PtRu electrocatalysts supported on conventional acid-treated MWCNTs and carbon black.     

Hydrothermal synthesis of size-dependent Pt in Pt/MWCNTs nanocomposites for methanol electro-oxidation

A hydrothermal method has been developed to prepare size-controlled Pt nanoparticles dispersed highly on multiwalled carbon nanotubes (Pt/MWCNTs). It was found that the size of Pt nanoparticles was strongly dependent on the solution pH in synthesis. The Pt nanoparticles with mean size of 3.0, 4.2 and 9.1 nm were obtained at pHs 13, 12 and 10 separately. After Pt/MWCNTs composites were fabricated, the different properties of cyclic voltammetry and chronoamperometry in electro-oxidation of methanol were found. The results showed that the smaller diameter Pt deposited Pt/MWCNTs nanocomposites exhibited higher electrocatalytic activity for methanol oxidation. By characterization of X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS), size-dependent activities were identified.     

Carbon nano-tube supported Pt–Pd as methanol-resistant oxygen reduction electrocatalyts for enhancing catalytic activity in DMFCs

This work tries to study the problem of methanol crossover through the polymer electrolyte in direct methanol fuel cells (DMFCs) by developing new cathode electrocatalysts. For this purpose, a series of gas diffusion electrodes (GDEs) were prepared by using single-walled carbon nanotubes (SWCNTs) supported Pt–Pd (Pt–Pd/SWCNT) with different Pd contents at the fixed metal loading of 50 wt%, as bimetallic electrocatalysts, in the catalyst layer. Pt–Pd/SWCNT was prepared by depositing the Pt and Pd nanoparticles on a SWCNTs support. The elemental compositions of bimetallic catalysts were characterized by inductively coupled plasma atomic emission spectroscopy (ICP-AES) system. The performances of the GDEs in the methanol oxidation reaction (MOR) and in the oxygen reduction reaction with/without the effect of methanol oxidation reaction were investigated by means of electrochemical techniques: cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). The results indicated that GDEs with Pt–Pd/SWCNT possess excellent electrocatalytic properties for oxygen reduction reaction in the presence of methanol, which can originate from the presence of Pd atoms and from the composition effect.     

Graphene-gold nanostructure composites fabricated by electrodeposition and their electrocatalytic activity toward the oxygen reduction and glucose oxidation

A gold nanoparticles (Au NPs)-graphene nanocomposite (Au-graphene nanocomposite) was prepared by electrochemically depositing Au NPs on the surface of graphene sheets, and characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray powder diffraction (XRD), and electrochemical methods. The morphology and size of the Au NPs could be easily controlled by adjusting the electrodeposition time and the concentration of precursor (AuCl₄⁻). The electrocatalytic activities of the nanocomposites toward oxygen reduction and glucose oxidation were investigated by cyclic voltammetry. The results indicated that the nanocomposites had a higher catalytic activity than the Au NPs or graphene alone, indicating the synergistic effect of graphene and Au NPs. Therefore, this study has provided a general route for fabrication of graphene-based noble metal nanomaterials composite, which could be potential utility to fuel cells and bioelectroanalytical chemistry.     

An efficient reduction route for the production of Pd–Pt nanoparticles anchored on graphene nanosheets for use as durable oxygen reduction electrocatalysts

Pt and Pd–Pt nanoparticles were anchored on reduced graphene oxide (RGO) with the aid of poly(diallyldimethylammonium chloride) (PDDA), where Pt and Pd ions were first attached to PDDA-functionalized graphene oxide sheets and the encased metal ions and graphene oxide were then reduced simultaneously by ethylene glycol. As supported by transmission electron microscopy, metal nanoparticles, of small particle size even at a high metal loading, were chemically attached to PDDA–RGO. X-ray diffraction indicates that the as-prepared Pd–Pt nanoparticles have a single-phase fcc structure and are principally alloys of Pd and Pt. Among the RGO-supported Pt and Pd–Pt catalysts, Pt nanoparticles anchored on PDDA–RGO exhibit the highest activity for the oxygen reduction reaction (ORR), and the ORR activity of the Pd–Pt alloy electrocatalysts increases with Pt content. All the catalysts demonstrate an enhanced ORR durability when PDDA is present; strongly suggesting that PDDA plays a crucial role in the dispersion and stabilization of the metal nanoparticles on RGO. The ORR activities of the Pd–Pt catalysts remain enhanced even after accelerated durability testing. The formation of a Pt-rich shell, as confirmed by X-ray photoelectron spectroscopy and CO stripping voltammetry, may account for the increased activity.     

Porous Co/Co–Ni–Pt nanostructures prepared by galvanic replacement towards methanol electro-oxidation

The nanostructured Co/Co–Ni–Pt catalyst were synthesized by electrodeposition process and galvanic replacement reaction. The alloy prepared on a copper electrode (Cu/Co/Co–Ni–Zn) was dipped in platinum containing alkaline solution to produce a porous Cu/Co/Co–Ni–Pt catalyst. The catalyst was characterized by energy dispersive X-ray and scanning electron microscopy techniques and its electrocatalytic properties were evaluated using cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry techniques. The results showed that the Co/Co–Ni–Pt coatings are porous, and composed of discrete Pt nanoparticles with the crystallite size of about 66 nm. It was shown from cyclic voltammograms in alkaline solutions that the oxidation current of methanol on the nanostructured Cu/Co/Co–Ni–Pt electrode was much higher than that on flat platinum. Electrochemical impedance spectra on the Co/Co–Ni–Pt electrode reveal that the charge transfer resistance decreases with the increase of anodic potentials. All results show that the Co/Co–Ni–Pt catalysts can be potential anode catalysts for the direct methanol fuel cell.     

Novel conjugated polymer/graphene/platinum composite for enhancing electrocatalytic oxidation of methanol

A novel conjugated polymer containing electron transport groups with high electron affinity, denoted POXD was synthesized upon polycondensation. The polymer was characterized by Fourier transform infrared (FTIR) spectra and ¹H nuclear magnetic resonance (¹H NMR) spectroscopy. Furthermore, the conjugated polymer/graphene (POXD/RGO) composite film was prepared, which was subsequently used as the support for the electrodeposition of platinum. The microstructure and morphology of the prepared samples were characterized by X‐ray photoelectron spectroscopy (XPS) and field emission scanning electron microscopy (FE‐SEM). The electrocatalytic activity for the oxidation of methanol was investigated through cyclic voltammogram method. The POXD/RGO composite film can facilitate the electrodeposition of Pt nanoparticles compared with graphene (RGO) support. The POXD/RGO/Pt composite exhibits more excellent electrocatalytic property for the oxidation of methanol, such as lower oxidation potential and higher current intensity, which might be attributed to the high electron affinity of the polymer and the interaction of the Pt nanoparticles with polymer. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers