共查询到19条相似文献,搜索用时 140 毫秒
1.
2.
3.
4.
考察了催化剂壁载方式、涂层载体和Pd负载量对微通道内的硝基苯气-液-固三相催化加氢反应的影响以及其并行放大效应.结果表明,与溶胶-凝胶法相比,浸渍法制备的催化剂涂层性能较好,其转化率、选择性分别达到89.2%和93.8%;采用强酸性、大比表面积的载体有利于反应性能的提高;活性组分Pd负载量为2.00 mg,催化剂活性较... 相似文献
5.
6.
垂直筛板塔内催化剂筐式装填结构的流体力学研究 总被引:1,自引:0,他引:1
基于垂直筛板帽罩的垂直特性,开发了一类用于催化精馏的新型催化剂筐式装填结构.该结构的主要特点为:均匀装填催化剂的催化剂筐置于帽罩外侧;气相与被提升的液相在帽罩内形成的气液混合物从罩孔喷出后进入筐内的催化剂床层:床层内的气-液-固的有效接触可显著促进非均相催化反应的进行.用空气-水体系在内径ψ48 mm冷模塔上考察了催化剂筐式装填结构的结构参数(帽罩形式、帽罩孔径和开孔率)对装填结构流体力学性能的影响;并根据操作范围和干板、湿板压降等因素对其进行了优化.研究结果表明基于柱形帽罩的催化剂筐式装填结构的气-液-固三相的接触状态优于基于矩形帽罩的:帽罩孔径ψ2 mm和开孔率0.056时的气-液-固接触效果和塔操作状态最佳. 相似文献
7.
8.
9.
气液固三相磁稳定流化床的操作状态对反应结果的影响 总被引:7,自引:0,他引:7
以氮气、水、铁粉为气液固三相研究了三相磁稳定流化床的床层操作状态;以重整生成油的烯烃饱和加氢过程为体系,研究了铁粉与大比表面非晶态合金催化剂混合颗粒为固相的磁稳定流化床中床层操作状态对反应结果的影响。找到了有利于气液固三相反应的磁稳定流化床床层操作状态 相似文献
10.
合成气直接制二甲醚研究进展 总被引:18,自引:1,他引:18
综述了合成气直接制二甲醚的技术进展,介绍了反应体系的热力学,催化剂,反应过程,分离工程,工业装置的最新研究成果,阐述了气固催化法与气液固三相床合成二甲醚的进展,并对合成气直接制二甲醚新工艺进行了技术经济评价。 相似文献
11.
12.
针对气液固三相浆态床催化反应中,传递、反应、催化剂的原位表征均比较复杂的问题,为了有利于气、固相均匀分散于液相和反应温度在反应器中实现等温,通过对气液固三相反应工艺特性和反应器性能要求的分析,对微型气液固三相浆态床反应器进行了优化。根据微型浆态床对气液固三相反应分析的要求,采用图像法研究了分布器为G1、G2、G3,砂板直径为2、2.5、3 cm反应器中的流体力学性能特征,考察了气体流速、温度、反应器直径及气体分布器对气含率、气泡尺寸、气泡上升速率以及气泡分布的影响,并进行流体动力学模拟计算,确定了微型浆态床反应器的直径为2 cm,气体分布器为G3砂板的反应器结构,该反应器可以应用于反应过程中间态及液体产物生成过程的测试。 相似文献
13.
14.
采用脉冲应答技术测定了矩形气液固三相流化床反应器中液相混合时间和下降速度。考察了挡板结构、气液流量、固体浓度对床层液相混合行为的影响。实验结果表明,在床中设置挡板构件,对液体混合时间与液体下降速度的影响不明显。 相似文献
15.
根据搅拌糟中气-液-固三相混合性能的研究,论述了工业三相浆态反应器内对气体、液体和固体的分散(混合)要求,据此对工业三相浆态反应器中叶轮的结构和搅拌浆的启动进行了讨论。 相似文献
16.
从数值模拟和试验研究的角度对新型脱硫除尘装置——伞罩型湿式脱硫除尘器气液固三相的除尘特性进行研究。利用FLUENT软件在Euler坐标系中考察气固二相,采用欧拉模型来表述气固二相的相互关系;同时在Lagrange坐标系中考察液滴的运动,并把液滴对气固二相的影响耦合于欧拉模型中,提出了气液固三相的Euler/Euler/Lagrange模型。分析了气相速度场、气相压力场、固相速度场以及液滴质量浓度等的分布情况,得到了除尘情况下装置内气液固三相的分布规律。数值模拟结果与试验结果吻合良好,对装置运行及其优化设计有一定的理论指导意义。 相似文献
17.
A closed Eulerian/Eulerian/Lagrangian mathematical model (E/E/L model) for simulating the local flow characteristics of gas-liquid-solid three-phase fluidization systems was established by combining the Two Fluid Model (TFM) and the Distinct Element Method (DEM). This model was based on the fundamental equations of fluid mechanics. The motion of particles was described in the Lagrangian coordinates, while the gas phase and the liquid phase were dealt with in the Eulerian coordinates. Based on IPSA and PSIC solution techniques, the program of simulating gas-liquid-solid local flow was achieved. The predicted results of local gas holdup and local solid holdup as well as local axial liquid velocity agree with the corresponding experimental data of a gas-liquid-solid three-phase fluidized bed, and the applicability and reliability of this proposed model were validated. 相似文献
18.
To simulate the bubble, liquid and particle turbulence properties and their interactions in three-phase flows, a second-order moment three-phase turbulence model for gas-liquid-solid flows is proposed. The bubble, liquid and particle Reynolds stress equations, bubble-liquid and liquid-solid two-phase correlation equations are derived using the mass-weighed and time averaging and the closure models of diffusion, dissipation and pressure-strain terms similar to those used in single-phase flows. The two-phase correlation equations are closed with a two-time-scale dissipation term. The proposed model is applied to simulate gas-liquid flows and gas-liquid-solid flows in a channel. The prediction results for two-phase flows are in good agreement with the PIV measurement results. The prediction results for three-phase flows give the gas, liquid and solid velocities, volume fractions and Reynolds stresses, showing that in the case studied the turbulent fluctuation of 5 mm bubbles is stronger than that of liquid, while the turbulent fluctuation of 0.5 mm particles is weaker than that of liquid. Bubbles enhance liquid turbulence, while particles reduce liquid turbulence. 相似文献
19.
采用基于双流体模型与粒子分散模型相结合的方法 ,建立了一个用于描述气液固三相湍流流动的Eulerian/Eulerian/Lagrangian模型 (简称E/E/L模型 ) .在Euler坐标系中考虑了气液两相 ,利用双流体模型来表述气液两相的相互关系 ;同时在Lagrange坐标系中考察了颗粒的运动 ,并把颗粒对气液两相的影响耦合于双流体模型中 .以流化床内气液固三相湍流流动为例进行的数值模拟结果与实验结果吻合良好 .所提出的模型及其模拟具有很好的准确性和可靠性 ,为研究气液固三相湍流流动提供了一种新的途径 相似文献