Engineered pH-inducible intein Mtu ΔI-CM variants with markedly reduced premature cleavage activity

Inteins have been widely exploited for the purification of tagless proteins. Among them, pH-inducible C-terminal-cleavage inteins enable the preparation of proteins and peptides with an authentic N-terminus. However, a severe premature cleavage around neutral pH has limited the application of these inteins, especially when used in recombinant hosts such as Escherichia coli. By targeting the microenvironment of the two key histidine residues H429 and H439, we engineered Mtu ΔI-CM intein to markedly reduce its premature cleavage. Kinetic analyses suggested that although the variants retained the pH dependence, they indeed cleaved slower, especially at pH 7.6. These variants resulted in higher yields for two model polypeptides than the original Mtu ΔI-CM intein, when used in conjunction with a cleavable self-assembling tag. This work suggests that more controllable pH-inducible inteins can be obtained by manipulating the residues in the self-cleavage sites and provide better performance for tag-based protein preparation strategies.     

Split Inteins: Nature’s Protein Ligases

Split inteins carry out a naturally occurring process known as protein trans-splicing, where two protein fragments bind to form a catalytically competent enzyme, then catalyze their own excision and the ligation of their flanking sequences. In the past thirteen years since their discovery, chemists and biologists have utilized split inteins in exogenous contexts for a number of biotechnological applications centered around the formation of native peptide bonds. While many protein trans-splicing technologies have emerged and flourished in recent years, several factors still limit their wide-spread practical use. Here, we discuss the development, applications, and limitations of split intein-based technologies and propose that further advancement in this field will require a more fundamental understanding of split intein structure and function.     

Efficient Generation of Hydrazides in Proteins by RadA Split Intein

Protein C-terminal hydrazides are useful for bioconjugation and construction of proteins from multiple fragments through native chemical ligation. To generate C-terminal hydrazides in proteins, an efficient intein-based preparation method has been developed by using thiols and hydrazine to accelerate the formation of the transient thioester intermediate and subsequent hydrazinolysis. This approach not only increases the yield, but also improves biocompatibility. The scope of the method has been expanded by employing Pyrococcus horikoshii RadA split intein, which can accommodate a broad range of extein residues before the site of cleavage. The use of split RadA minimizes premature intein N cleavage in vivo and offers control over the initiation of the intein N cleavage reaction. It is expected that this versatile preparation method will expand the utilization of protein C-terminal hydrazides in protein preparation and modification.     

Site-specific chemical modification of proteins with a prelabelled cysteine tag using the artificially split Mxe GyrA intein

The selective modification of proteins with a synthetic probe is of central interest for many aspects of protein chemistry. We have recently reported a new approach in which a short cysteine-containing tag (CysTag) fused to one part of a split intein is first modified with a sulfhydryl-reactive probe. In a second step, protein trans-splicing is used to link the labelled CysTag to a target protein that has been expressed in fusion with the complementary split intein fragment. Here, we present the generation and biochemical characterisation of the artificially split Mycobacterium xenopi GyrA intein. We show that this split intein is active without a renaturation step and that it provides a significant improvement for the CysTag protein-labelling approach in terms of product yields and target protein tolerance. Two proteins with multiple cysteine residues, human growth hormone and a multidomain nonribosomal peptide synthetase, were site-specifically modified with high yields. Our approach combines the benefits of the plethora of commercially available cysteine-reactive probes with a straightforward route for their site-specific incorporation even into complex and cysteine-rich proteins.     

Semisynthesis and characterization of the first analogues of pro-neuropeptide y

Enzymatic cleavage of prohormone neuropeptide Y (proNPY) leads to mature neuropeptide Y (NPY), a widely distributed neuropeptide with multiple functions both peripherally and centrally. A single dibasic pair of amino acids, Lys38-Arg39, represents the recognition motif for a class of hormone-processing enzymes known as prohormone convertases (PCs). Two members of this PC family, PC1/3 and PC2, are involved in proNPY cleavage. The aim of this work was to establish an effective method for the generation of full-length 69-amino acid proNPY analogues for further studies of prohormone convertase interaction. We have chosen two ligation sites in order to perform the semisynthesis of proNPY analogues by expressed protein ligation (EPL). By using the intein-mediated purification system (IMPACT) with improved conditions for intein splicing, we were able to isolate proNPY 1-40 and proNPY 1-54 fragments as Cterminal thioesters. Peptides bearing Nterminal cysteine instead of the naturally occurring Ser41 and Thr55 residues, respectively, were generated by solid-phase peptide synthesis. Moreover, labels (carboxyfluorescein and biotin) were inserted into the peptide sequences. The synthesis of the [C41]proNPY 41-69 fragment, which proved to be a difficult peptide sequence, could be achieved by the incorporation of two pseudo-proline derivatives. Western blot analysis revealed that all five proNPY analogues are recognized by monoclonal antibodies directed against NPY as well as against the Cflanking peptide of NPY (CPON).     

Off-Pathway-Sensitive Protein-Splicing Screening Based on a Toxin/Antitoxin System

Protein-splicing domains are frequently used engineering tools that find application in the in vivo and in vitro ligation of protein domains. Directed evolution is among the most promising technologies used to advance this technology. However, the available screening systems for protein-splicing activity are associated with bottlenecks such as the selection of pseudo-positive clones arising from off-pathway reaction products or fragment complementation. Herein, we report a stringent screening method for protein-splicing activity in cis and trans, that exclusively selects productively splicing domains. By fusing splicing domains to an intrinsically disordered region of the antidote from the Escherichia coli CcdA/CcdB type II toxin/antitoxin system, we linked protein splicing to cell survival. The screen allows selecting novel cis- and trans-splicing inteins catalyzing productive highly efficient protein splicing, for example, from directed-evolution approaches or the natural intein sequence space.     

Expanding the Scope of Protein Trans‐Splicing to Fragment Ligation of an Integral Membrane Protein: Towards Modulation of Porin‐Based Ion Channels by Chemical Modification

It's raining, it's porin : Fragment ligation of OmpF ion channels was achieved by using the split Psp‐GBD Pol intein; this allowed reconstitution of active trimeric porin. In combination with cysteine modification at an internal position, the porin's conductance properties were altered.

     

Native Chemical Ligation Combined with Desulfurization and Deselenization: A General Strategy for Chemical Protein Synthesis

Of the many approaches proposed to generalize the native chemical ligation approach for protein synthesis, the simple procedure of global desulfurization of peptide thiols has become the most widely adopted. In this review, the development of the native ligation–desulfurization strategy is described, focusing on the conversion of Cys to Ala following ligation at N-terminal Cys residues. Subsequent variations on this theme have broadened the scope to other natural amino acids including Phe, Leu, Val, and Lys, and even non-native peptide linkages such as isopeptide bonds on lysine side chains. Using insights from both selenocysteine–peptide side reactions and radical initiated desulfurization procedures, a new method for the selective deselenization of peptides containing both selenocysteine and cysteine residues has been developed. Together, these approaches represent a robust and flexible methodology for the synthesis of complex polypeptides without the use of protecting groups.     

Bacterial Cell-Surface Display of Semisynthetic Cyclic Peptides

Semisynthetic cyclic peptides containing both non-proteinogenic building blocks, as the synthetic part, and a genetically encoded sequence amenable to DNA-based randomization hold great potential to expand the chemical space in the quest for novel bioactive peptides. Key to an efficient selection of novel binders to biomacromolecules is a robust method to link their genotype and phenotype. A novel bacterial cell surface display technology has been developed to present cyclic peptides composed of synthetic and genetically encoded fragments in their backbones. The fragments were combined by protein trans-splicing and intramolecular oxime ligation. To this end, a split intein half and an unnatural amino acid were displayed with the genetically encoded part on the surface of Escherichia coli. Addition of the synthetic fragment equipped with the split intein partner and an aminooxy moiety, as well as the application of a pH-shift protocol, resulted in the onsurface formation of the semisynthetic cyclic peptide. This approach will serve for the generation of cyclic peptide libraries suitable for selection by fluorescence-activated cell sorting, and more generally enables chemical modification of proteins on the bacterial surface.     

Multiple Site‐Selective Insertions of Noncanonical Amino Acids into Sequence‐Repetitive Polypeptides

A simple and efficient method is described for the introduction of noncanonical amino acids at multiple, defined sites within recombinant polypeptide sequences. Escherichia coli MRA30, a bacterial host strain with attenuated activity of release factor 1 (RF1), was assessed for its ability to support incorporation of a diverse range of noncanonical amino acids in response to multiple encoded amber (TAG) codons within genes derived from superfolder GFP and an elastin‐mimetic protein polymer. Suppression efficiency and protein yield depended on the identity of the orthogonal aminoacyl‐tRNA synthetase/tRNA^CUA pair and the noncanonical amino acid. Elastin‐mimetic protein polymers were prepared in which noncanonical amino acid derivatives were incorporated at up to 22 specific sites within the polypeptide sequence with high substitution efficiency. The identities and positions of the variant residues were confirmed by mass spectrometric analysis of the full‐length polypeptides and proteolytic cleavage fragments from thermolysin digestion. The data suggest that this multisite suppression approach permits the preparation of protein‐based materials in which novel chemical functionalities can be introduced at precisely defined positions within the polypeptide sequence.     

Macrocyclization of Organo‐Peptide Hybrids through a Dual Bio‐orthogonal Ligation: Insights from Structure–Reactivity Studies

Macrocycles constitute an attractive structural class of molecules for targeting biomolecular interfaces with high affinity and specificity. Here, we report systematic studies aimed at exploring the scope and mechanism of a novel chemo‐biosynthetic strategy for generating macrocyclic organo‐peptide hybrids (MOrPHs) through a dual oxime‐/intein‐mediated ligation reaction between a recombinant precursor protein and bifunctional, oxyamino/1,3‐amino‐thiol compounds. An efficient synthetic route was developed to access structurally different synthetic precursors incorporating a 2‐amino‐ mercaptomethyl‐aryl (AMA) moiety previously found to be important for macrocyclization. With these compounds, the impact of the synthetic precursor scaffold and of designed mutations within the genetically encoded precursor peptide sequence on macrocyclization efficiency was investigated. Importantly, the desired MOrPHs were obtained as the only product from all the different synthetic precursors probed in this study and across peptide sequences comprising four to 15 amino acids. Systematic mutagenesis of the “i?1” site at the junction between the target peptide sequence and the intein moiety revealed that the majority of the 20 amino acids are compatible with MOrPH formation; this enables the identification of the most and the least favorable residues for this critical position. Furthermore, interesting trends with respect to the positional effect of conformationally constrained (Pro) and flexible (Gly) residues on the reactivity of randomized hexamer peptide sequences were observed. Finally, mechanistic investigations enabled the relative contributions of the two distinct pathways (side‐chain→C‐end ligation versus C‐end→side‐chain ligation) to the macrocyclization process to be dissected. Altogether, these studies demonstrate the versatility and robustness of the methodology to enable the synthesis and diversification of a new class of organo‐peptide macrocycles and provide valuable structure–reactivity insights to inform the construction of macrocycle libraries through this chemo‐biosynthetic strategy.     

Activation of Protease and Luciferase Using Engineered Nostoc punctiforme PCC73102 DnaE Intein with Altered Split Position

Inteins, self-catalytic enzymes, have been widely used in the field of protein engineering and chemical biology. Here, Nostoc punctiforme PCC73102 (Npu) DnaE intein was engineered to have an altered split position. An 11-residue N-intein of DnaE in which Gly and Asp were substituted for Tyr4 and Glu5, respectively, was designed, and the active C-intein variants were acquired by a GFP fluorescence-based screening. The designed N-intein and the obtained active C-intein variants were used to construct a turn-on system for enzyme activities such as human immunodeficiency 1 protease and NanoLuc luciferase. Based on the NanoLuc-intein fusion, we developed two intein pairs, each of which is capable of reacting preferentially, by interchanging the charged amino acids on N- and C-inteins. The specific splicing reactions were easily monitored and discriminated by bioluminescence resonance energy transfer (BRET).     

Effects of FlAsH/Tetracysteine (TC) Tag on PrP Proteolysis and PrPres Formation by TC‐Scanning

Protein–protein interactions associated with proteolytic processing and aggregation are integral to normal and pathological aspects of prion protein (PrP) biology. Characterization of these interactions requires the identification of amino acid residues involved. The FlAsH/tetracysteine (FlAsH/TC) tag is a small fluorescent tag amenable to insertion at internal sites in proteins. In this study, we used serial FlAsH/TC insertions (TC‐scanning) as a probe to characterize sites of protein–protein interaction between PrP and other molecules. To explore this application in the context of substrate–protease interactions, we analyzed the effect of FlAsH/TC insertions on proteolysis of cellular prion protein (PrPsen) in in vitro reactions and generation of the C1 metabolic fragment of PrPsen in live neuroblastoma cells. The influence of FlAsH/TC insertion was evaluated by TC‐scanning across the cleavage sites of each protease. The results showed that FlAsH/TC inhibited protease cleavage only within limited ranges of the cleavage sites, which varied from about one to six residues in width, depending on the protease, providing an estimate of the PrP residues interacting with each protease. TC‐scanning was also used to probe a different type of protein–protein interaction: the conformational conversion of FlAsH‐PrPsen to the prion disease‐associated isoform, PrPres. PrP constructs with FlAsH/TC insertions at residues 90–96 but not 97–101 were converted to FlAsH‐PrPres, identifying a boundary separating loosely versus compactly folded regions of PrPres. Our observations demonstrate that TC‐scanning with the FlAsH/TC tag can be a versatile method for probing protein–protein interactions and folding processes.     

Recognition of ASF1 by Using Hydrocarbon-Constrained Peptides

Inhibiting the histone H3–ASF1 (anti-silencing function 1) protein–protein interaction (PPI) represents a potential approach for treating numerous cancers. As an α-helix-mediated PPI, constraining the key histone H3 helix (residues 118–135) is a strategy through which chemical probes might be elaborated to test this hypothesis. In this work, variant H3_118–135 peptides bearing pentenylglycine residues at the i and i+4 positions were constrained by olefin metathesis. Biophysical analyses revealed that promotion of a bioactive helical conformation depends on the position at which the constraint is introduced, but that the potency of binding towards ASF1 is unaffected by the constraint and instead that enthalpy–entropy compensation occurs.     

Expression of intein‐tagged fusion protein and its applications in downstream processing

The conventional methods of downstream purification of a recombinant protein are not only complicated and delicate but time consuming, and need to be improved. Since the intein, the protein splicing element, was discovered, this self‐cleaving element has been exploited and applied to the purification of recombinant proteins which could significantly simplify the purification procedure. Intein has the unique property that when it is combined with an affinity tag, it enables a target protein to be purified in a single chromatographic step. This review elucidates the properties of intein (the mechanism that unravels the intein‐based protein splicing), the advantages of an intein affinity expression system, the progress of intein‐based protein purification procedures, and recent advances in the applications of intein. Further development of the intein‐based purification system may lead to the applications of this system to industrial‐scale production of recombinant proteins. Copyright © 2009 Society of Chemical Industry     

Unambiguous Assignment of Short‐ and Long‐Range Structural Restraints by Solid‐State NMR Spectroscopy with Segmental Isotope Labeling

We present an efficient method for the reduction of spectral complexity in the solid‐state NMR spectra of insoluble protein assemblies, without loss of signal intensity. The approach is based on segmental isotope labeling by using the split intein DnaE from Nostoc punctiforme. We show that the segmentally ¹³C,¹⁵N‐labeled prion domain of HET‐s exhibits significantly reduced spectral overlap while retaining the wild‐type structure and spectral quality. A large number of unambiguous distance restraints were thus collected from a single two‐dimensional ¹³C,¹³C cross‐correlation spectrum. The observed resonances could be unambiguously identified as intramolecular without the need for preparing a dilute, less sensitive sample.     

Rapid Screening of Glucocorticoid Receptor (GR) Effectors Using Cortisol-Detecting Sensor Cells

Cortisol, a stress hormone, plays key roles in mediating stress and anti-inflammatory responses. As abnormal cortisol levels can induce various adverse effects, screening cortisol and cortisol analogues is important for monitoring stress levels and for identifying drug candidates. A novel cell-based sensing system was adopted for rapid screening of cortisol and its functional analogues under complex cellular regulation. We used glucocorticoid receptor (GR) fused to a split intein which reconstituted with the counterpart to trigger conditional protein splicing (CPS) in the presence of targets. CPS generates functional signal peptides which promptly translocate the fluorescent cargo. The sensor cells exhibited exceptional performance in discriminating between the functional and structural analogues of cortisol with improved sensitivity. Essential oil extracts with stress relief activity were screened using the sensor cells to identify GR effectors. The sensor cells responded to peppermint oil, and L-limonene and L-menthol were identified as potential GR effectors from the major components of peppermint oil. Further analysis indicated L-limonene as a selective GR agonist (SEGRA) which is a potential anti-inflammatory agent as it attenuates proinflammatory responses without causing notable adverse effects of GR agonists.     

Cyclic Peptides Made by Linking Synthetic and Genetically Encoded Fragments

Cyclic peptides can be highly valuable as bioactive molecules, both for biomedical applications and in basic research. We introduce a new fragment‐based approach to access cyclic peptide structures in which one fragment is of synthetic origin and the other is genetically encoded. The synthetic peptide, which can contain one or more non‐proteinogenic building blocks, is coupled to the recombinantly expressed peptide through two bonds, one formed by protein trans‐splicing with a split intein and the other by oxime ligation. Semisynthetic macrocycles were obtained with high efficiency for various sequences and ring sizes; they can be prepared in quantities sufficient for initial bioactivity tests. We also prepared lipidated and d ‐amino‐acid‐containing peptides that were inspired by the peptide antibiotic daptomycin. Such structures are not accessible by other methods that harness the power of simple genetic diversification in the DNA‐encoded part of the peptide.     

Rational Design of Resveratrol O-methyltransferase for the Production of Pinostilbene

Pinostilbene is a monomethyl ether analog of the well-known nutraceutical resveratrol. Both compounds have health-promoting properties, but the latter undergoes rapid metabolization and has low bioavailability. O-methylation improves the stability and bioavailability of resveratrol. In plants, these reactions are performed by O-methyltransferases (OMTs). Few efficient OMTs that monomethylate resveratrol to yield pinostilbene have been described so far. Here, we report the engineering of a resveratrol OMT from Vitis vinifera (VvROMT), which has the highest catalytic efficiency in di-methylating resveratrol to yield pterostilbene. In the absence of a crystal structure, we constructed a three-dimensional protein model of VvROMT and identified four critical binding site residues by applying different in silico approaches. We performed point mutations in these positions generating W20A, F24A, F311A, and F318A variants, which greatly reduced resveratrol’s enzymatic conversion. Then, we rationally designed eight variants through comparison of the binding site residues with other stilbene OMTs. We successfully modified the native substrate selectivity of VvROMT. Variant L117F/F311W showed the highest conversion to pinostilbene, and variant L117F presented an overall increase in enzymatic activity. Our results suggest that VvROMT has potential for the tailor-made production of stilbenes.