Defining and characterizing the “nutty” attribute across food categories

The term “nutty” has been used to describe a vast array of foods including many foods outside the realm of nuts. However, it is not clear if “nutty” is a single term or if it takes various forms, depending on the type of product. The objective of this study was to determine whether a single nutty term could be used to describe nuttiness in all food products or if additional terms were needed. More than 200 products with potential nutty flavor, including nuts, nut spreads, grains/cereals, seeds, beans/legumes, oils, cheeses, fish, and beverages, were studied. Five “nutty” concepts were found and described with terms, definitions, and references with intensity ratings: overall nutty, nutty-beany, nutty-buttery, nutty-grain-like, and nutty-woody. Four of those attributes, excluding overall nutty, were single concept attributes that described subgroups of nuttiness. Specific terms, such as peanut or almond, that describe a certain type of nut but are separate from the “nutty” character were excluded intentionally because they do not describe nutty, they describe an overall concept flavor beyond nutty. A second panel of trained assessors was used to review the lexicon. This panel used this lexicon to describe a set of 10 products (nuts, grains, beans, seeds, cheeses) and determine if any additional attributes were needed to describe nuttiness. All of the products displayed varying intensities of the nutty attributes and the panel found no additional terms for the “nutty” component were needed. The development and verification of the lexicon has real-world application because it can assist in product development and quality assurance when describing foods with a “nutty” attribute. These terms can be applied across all food categories and is not exclusive to characterizing nuts.     

Consumer preferences and willingness to pay for value-added chicken product attributes

A growing demand for convenient and ready-to-eat products has increased poultry processors' interest in developing consumer-oriented value-added chicken products. In this study, a conjoint analysis survey of 276 chicken consumers in Edmonton was conducted during the summer of 2009 to assess the importance of the chicken part, production method, processing method, storage method, the presence of added flavor, and cooking method on consumer preferences for different value-added chicken product attributes. Estimates of consumer willingness to pay (WTP) premium prices for different combinations of value-added chicken attributes were also determined. Participants'"ideal" chicken product was a refrigerated product made with free-range chicken breast, produced with no additives or preservatives and no added flavor, which could be oven heated or pan heated. Half of all participants on average were willing to pay 30% more for a value-added chicken product over the price of a conventional product. Overall, young consumers, individuals who shop at Farmers' Markets and those who prefer free-range or organic products were more likely to pay a premium for value-added chicken products. As expected, consumers' WTP was affected negatively by product price. Combined knowledge of consumer product attribute preferences and consumer WTP for value-added chicken products can help the poultry industry design innovative value-added chicken products. Practical Application: An optimum combination of product attributes desired by consumers for the development of a new value-added chicken product, as well as the WTP for this product, have been identified in this study. This information is relevant to the poultry industry to enhance consumer satisfaction of future value-added chicken products and provide the tools for future profit growth.     

Consumer segmentation based on food neophobia and its application to product development

When evaluating the acceptability of food products, companies often focus on specific demographics for recruiting and screening consumers. However, this information may not necessarily explain the variability in the test results. Other elements, such as consumer psychographic profiles, may help better understand test participants’ responses. The objective of this study was to investigate the effect of food neophobia (reluctance to/avoidance of novel foods) on acceptability of novel food items. Six salad dressings with novel flavor combinations were chosen for evaluation in a central location test. Consumers were screened using the food neophobia scale (Pliner & Hobden, 1992) as well as liking of salad dressings. Each subject evaluated three of six dressings for hedonic and diagnostic attributes. Neophobic subjects rated the salad dressings significantly lower (p < 0.05) than neophilics for all hedonic attributes with the exception of appearance. These results were consistent for all dressings. However, when looking at the hedonic mean scores from both groups, the products were ranked in similar order in that the best liked and least liked dressing for the neophilic group was the same as those for the neophobic group. For diagnostic attributes, while the mean scores were significantly different for neophobics and neophilics, the percentage of “just-about-right” scores did not differ. These results suggest that food neophobia may impact the degree with which a product is liked or disliked by consumers, but it may not affect how products are ranked based on hedonic mean scores. Therefore, while understanding the psychographic composition of a consumer test respondent base may help explain why some products score higher or lower in acceptability, it may not alter the sensory guidance provided to product development regarding the specific flavor and texture attributes that were tested.     

Linking intrinsic quality attributes of agricultural produce to revealed consumer preferences

The quality of agricultural produce, such as fruit and vegetables, is defined by grading criteria based on the assessment of primary product attributes determined at harvest. These quality measures, which characterize important end-product intrinsic attributes such as flavor and texture, are used by processors and retailers to differentiate retail products; hence they determine farm-gate and retail prices for each crop variety. Despite their importance, limited published research has systematically linked these attributes at harvest to consumer preference at retail level.In this article, we adopt a demand system, the Almost Ideal Demand Systems, to assess the effects of the intrinsic quality attributes on consumers’ purchase choices across six different quality grades that relate to 41 vegetable products sold by a leading United Kingdom (UK) retailer over a two year period. Findings suggest that consumers are both able to differentiate products based on the attributes determined at harvest and willing to pay a premium for these attributes. These findings are relevant to both industry and public health practitioners intending to maintain or expand demand for vegetables in the UK.     

Alternative protein sources in Western diets: Food product development and consumer acceptance of spirulina-filled pasta

Spirulina (Arthrospira platensis) is currently being increasingly researched for its usability and suitability in human nutrition. The inclusion of alternative protein sources, such as spirulina, in familiar products is a possible strategy to nudge consumers towards dietary change in Western societies. Filled pasta variants with three levels of spirulina-soy-extrudate in the filling (10%, 30% or 50%) were developed and investigated for their sensory characteristics and consumer liking. Recipe development was based on the concepts of flavor-flavor learning (beet-ginger or tomato) and masking (lemon-basil) to account for the musty and earthy notes of the alga. Consumer tests were conducted in Germany (n = 139), the Netherlands (n = 137) and France (n = 144), and conventional sensory profiling was accomplished with trained panelists (n = 12). Consumers preferred the lemon-basil flavor over tomato and beet-ginger flavored fillings. As expected, liking decreased with increased extrudate content, regardless of the flavor. For all flavors expected liking was higher than liking after product exposure; for the lemon-basil flavor the gap was the smallest. It was shown that low general food neophobia and familiarity with spirulina promoted consumer liking. The sensory profiling revealed that the spirulina-soy-extrudate content affected all sensory attributes identified across all flavors, but for the tomato flavor the most. Overall, this study confirms that it is important to consider differences in consumer motivation as well as the product’s conceptual and intrinsic sensory characteristics in new product development.     

感官分析在番鸭产品研发中的应用

为了解消费者对鸭加工食品风味的偏好,指导番鸭产品加工工艺的改进,采用感官属性强度分析的方法对市售鸭肉制品的感官特性进行定性和定量评定,剖析测定该类产品的主要风味特征及其强度;采用感官嗜好性评价方法,对市售产品和自制样品进行分析对比。结果表明:色泽明亮红润,咸味酱香适中,鲜味明显且滞留感弱,油腻感少的产品更受欢迎。     

Visualization of temporal differences between dominant perceptions in temporal dominance of sensations (TDS) and temporal check-all-that-apply (TCATA) perceptions using dominance-highlighted TCATA (dTCATA) curves

The temporal dominance of sensations (TDS) method measures dynamic changes of panelists’ attention to the sensory attributes of products. The temporal check-all-that-apply (TCATA) method measures all sensory attributes perceived at each moment of an evaluation. However, unlike in TDS, significant levels cannot be calculated in TCATA. This study proposes the use of dominance-highlighted TCATA (dTCATA) curves, which are highlighted TCATA curves that show significant time periods for the TDS data of different panels. Twelve R&D panelists evaluated five commercial corn soups using the TCATA method. Then, 125 consumer panelists evaluated the same products using the TDS method. The dTCATA curves showed TCATA curves for all attributes for each product evaluated by the R&D panel highlighted with the dominance rates identified by the consumer panel in the TDS evaluation. For example, for product 1, some attributes (sweet, viscosity) showed relatively high citation proportions in the TCATA evaluations of the R&D panel and significant dominance rates in the TDS evaluations of the consumer panel. In contrast, consommé flavor showed relatively low citation proportions in TCATA but significant dominance rates in TDS. By merging TDS and TCATA data, we could compare consumers’ dominant sensations with the evaluations of R&D panelists. This comparison could provide useful insights to product developers. In some cases, we observed attributes with significant dominance rates that were under-identified by the R&D panel in TCATA. This could suggest that most of the R&D panel may not have perceived these attributes; therefore, during product development, these attributes should be carefully considered.     

Investigating quality attributes and consumer acceptance of uncured, no-nitrate/nitrite-added commercial hams, bacons, and frankfurters

ABSTRACT:  Increasing demands for natural, organic, and/or preservative-free foods have resulted in the consumer availability of uncured, no-nitrate/nitrite-added processed meat and poultry products. A comprehensive understanding about the quality and sensory attributes of commercially available uncured products is unclear. The objective of this study was to determine if quality and sensory differences exist between uncured and cured meat products. Five different commercial brands (Brands A to E; 4 uncured, no-nitrate/nitrite-added, and 1 nitrite-added) of 3 product types (hams, frankfurters, and bacons) were obtained from retail supermarkets. The samples were evaluated for color, pigment content, pH, lipid oxidation, residual nitrate and nitrite content, and consumer acceptance. All brands from all product types evaluated, except for 1 bacon (Brand B), had cured color, aroma, and flavor attributes similar to the nitrite-added control (Brand E). All product types and brands contained residual nitrate and residual nitrite except for Brands B and D bacons (< 1 ppm nitrite). Lipid oxidation as measured by 2-thiobarbituric acid reactive substances revealed a large variation in the occurrence of lipid oxidation both between and within product types, with frankfurters reporting the highest levels. Color measurements indicated the majority of the brands within each product type were similar to the control. Consumer sensory ratings for surface/lean color, aroma, flavor, texture, and overall acceptance determined that variation existed. Brand E (nitrite-added control) and 1 uncured, no-nitrate/nitrite-added brand for each product type were not different ( P > 0.05) for overall acceptance and received higher scores ( P < 0.05) than all other brands within each product type.     

Contribution of temporal dominance of sensations performed by modality (M-TDS) to the sensory perception of texture and flavor in semi-solid products: A case study on fat-free strawberry yogurts

This study aimed to perform Temporal Dominance of Sensations by modality (M-TDS) combined with a multi-intake approach to investigate texture and flavor perception in semi-solid products. Trained panelists (n = 15) evaluated fat-free strawberry yogurts enriched with functional proteins involving texture modifications. As yogurt is a semi-solid product, its in-mouth residence time is short. A multi-intake approach was therefore expected to give more reliable information about the sensory properties perceived by panelists. The two modalities of texture and flavor were analyzed separately to characterize the effect of added proteins. Trials were made according to an experimental design with two factors (protein type and concentration) and three levels each. Different statistical treatments, taking or not the temporality of attributes into account, were performed on standardized and non-standardized data. The implementation of M-TDS was essential to highlight differences of flavor perception in addition to the more evident texture modifications. The study of sensory trajectories evidenced that texture modifications, induced by the use of different whey proteins, slightly modified the perception of flavor and sweetness. The global flavor perception of the samples varied with the number of spoons, which particularly impacted the taste attributes. This study highlighted the importance of using M-TDS when studying texture and flavor in semi-solid products, and the relevance of the multi-intake approach to characterize flavor perception. This methodology enabled panelists to evidence both marked texture differences and subtler flavor modifications, and these useful data were emphasized by combining different statistical treatments.