共查询到20条相似文献,搜索用时 46 毫秒
1.
针对传统的交流调压方案通过改变晶闸管的导通角大小来直接调节交流输出电压而存在的输出电压谐波大、难以获得高电压输出等问题,设计了一种高压直流电源,其主电路采用星点控制方式调压、升压变压器隔离及高压二极管阀整流的方案。采用该设计生产的2台55kV/150A规格高压电源组成16.5MW、输出电压可在0-110kV之间调节、最大输出电流300A的高压直流电源用于中国环流二号(HL-2A)核聚变装置的二级加热系统。工程实际运行结果表明,该电源性能稳定,完全满足聚变科学研究中的实验使用需要。 相似文献
2.
目前,电力拖动系统实验高压直流大功率电源是一个不可缺小的设备之一,所以直流电源的输出质量及可靠性直接关系到实验室的安全运行。给出了利用自制高压隔离电压电流传感器监测直流电压电流的设计方法,以单片机为核心采用单相交流220V可控整流模块,通过参数调节实现了可控制输出高压直流可调带保护的直流电源。 相似文献
3.
杨胜仪 《国内外机电一体化技术》2008,(3)
文章介绍了一种基于西门子S7-200PLC和人机电子MT510T触摸屏的高频直流电源监控器的设计。在充分发挥S7200PLC性能前提下,监控器采用12位A/D模拟量采样模块对电力直流系统的电流、电压等模拟量进行采集处理,利用PID调节算法产生调节量,由模拟量输出通道产生0~10V的直流电压量控制高频整流模块的输出电压、电流,实现闭环控制,从而完成对高频直流电源的实时监控。 相似文献
4.
5.
X射线高压发生器控制电路采用电压和电流两路负反馈回路对高压发生器进行控制,同时通过两个可调电阻实现精确微调。在X射线高压发生器控制电路内部,采用ADUC842单片机对X射线高压电源智能控制系统运行状态进行实时监控,同时通过对反馈值直接系数校准的方式,忽略内部元件的偏差,实现精确设置。内部采用的ADUC842为用户提供一个便捷的软件接口,方便用户二次开发。 相似文献
6.
针对光电倍增管工作时需要稳定性高、电压可调的高压直流电源,设计了一款以DSP为控制芯片,+12V直流电压经移相全桥逆变、高频变压器升压以及倍压整流、滤波后得到所需的高压直流电,通过对输出电压检测并调整PWM的占空比,实现输出电压的稳定。实验结果表明,该电源稳定性和可调范围完全满足光电倍增管工作的要求。 相似文献
7.
分析了环境湿度大小对高压电使用的影响,设计了一种基于湿度控制的静电式空气净化器高压电源,采用微功率非隔离方式实现AC-DC转换,经过自激推挽式DC-AC升压电路和倍压整流电路获得两路高压输出,通过PIC单片机控制数字电位器X9241控制电压输出。实现了220 V交流电输入,两路电压为5 kV和10 kV的高压输出,并依据采集到的环境湿度信息,自动调节输出电压大小。经试验测试表明,该电源输出电压可控性好、体积小、成本低、功耗低,有效保证了电源在不同湿度环境中的使用安全。 相似文献
8.
9.
10.
直流高压电源在离子束流传输中,对离子束进行加速、偏转和引出。本文介绍了基于研华ADAM-4000系列分布式模块实现了10KV高压直流电源的远程控制,其控制功能包括远程开关量操作、实时获取电源运行状态和输出高压调节等。 相似文献
11.
针对工程中对高压高阻检定精度不断提高的问题,设计了一套基于高压电桥法和ARM的数字式高压高阻鉴定系统。该系统硬件部分主要包括高压电源模块、高压电桥模块、信号采集模块、ARM cortex M4嵌入式控制模块。在控制模块设置测量电压,将高压电源模块输出电压加载到被测电阻两端,根据量程选择恒流恒压方式进行测量,经过A/D采集计算出所测量的电阻,同时可以通过LCD多级菜单设置测量系数并显示鉴定结果。本系统将电桥测量原理、数字处理技术结合在一起,实现了对目前国内市场上各种电压、电阻范围高阻箱的检定。经过试验表明鉴定结果符合JJG 166-93、DL/T 979-2005,可替代传统的高压高阻电桥。 相似文献
12.
13.
14.
15.
高速高精度ADC系统研究 总被引:2,自引:0,他引:2
由于单个ADC模拟输入带宽的限制,混合滤波器组ADC系统不能够直接对高达数GHz的模拟信号进行采样.本文提出了基于混频器和低通滤波器的抽取器数学模型,并且从时域和频域进行详细的分析和证明.最后在混合滤波器组ADC系统的基础上,提出了基于混频器和低通滤波器的高速高精度混合滤波器组ADC系统,它完全满足软件无线电和雷达等多个领城的高速高精度要求. 相似文献
16.
17.
Abdlmonem H. Beitelmal Chandrakant D. Patel 《Distributed and Parallel Databases》2007,21(2-3):227-238
Consolidation and dense aggregation of slim compute, storage and networking hardware has resulted in high power density data
centers. The high power density resulting from current and future generations of servers necessitates detailed thermo-fluids
analysis to provision the cooling resources in a given data center for reliable operation. The analysis must also predict
the impact on the thermo-fluid distribution due to changes in hardware configuration and building infrastructure such as a
sudden failure in data center cooling resources. The objective of the analysis is to assure availability of adequate cooling
resources to match the heat load, which is typically non-uniformly distributed and characterized by high-localized power density.
This study presents an analysis of an example modern data center with a view of the magnitude of temperature variation and
impact of a failure. Initially, static provisioning for a given distribution of heat loads and cooling resources is achieved
to produce a reference state. A perturbation in reference state is introduced to simulate a very plausible scenario—failure
of a computer room air conditioning (CRAC) unit. The transient model shows the “redlining” of inlet temperature of systems
in the area that is most influenced by the failed CRAC. In this example high-density data center, the time to reach unacceptable
inlet temperature is less than 80 seconds based on an example temperature set point limit of 40°C (most of today's servers
would require an inlet temperature below 35°C to operate). An effective approach to resolve this issue, if there is adequate
capacity, is to migrate the compute workload to other available systems within the data center to reduce the inlet temperature
to the servers to an acceptable level.
Recommended by: Ahmed Elmagarmid 相似文献
18.
19.
20.