La~(3+)掺杂钛酸铋钠基无铅陶瓷的压电性能与介电弛豫行为

采用冷等静压成型和密闭烧结工艺,制备了具有微晶结构的稀土离子La3+掺杂0.9TNa0.5Bi0.5TiO3-0.03K0.5Na0.5NbO3基无铅压电陶瓷体系.研究了该体系陶瓷的相结构,显微结构与介电、压电性能.结果表明:在掺杂范围内(0.015≤x≤0.105),La3+可完全固溶进陶瓷晶格形成单一的钙钛矿相.采用等静压成型工艺可明显改善陶瓷的显微结构,使晶粒细化,进而提高材料的压电性能.该陶瓷具有弥散相变和频率色散特征,为典型的弛豫型铁电体.随着La3+掺杂量的增加,材料的铁电-反铁电相变温度下降,Curie温度提高,相对介电常数、介电损耗和压电常数逐渐减小,弛豫特征愈明显.     

Co2O3掺杂对(Na0.8K0.2)0.5Bi0.5TiO3陶瓷结构与电性能的影响

采用传统固相法制备了(Na0.8K0.2)0.5Bi0.5TiO3+xmol%Co3+(BNKT-xCo,x=0-8)无铅压电陶瓷,研究了Co2O3掺杂对BNKT陶瓷的显微结构与电学性能的影响。研究表明:适量的Co2O3掺杂促进了晶粒生长,纯BNKT陶瓷样品在介电温谱上有2个介电反常峰Td和Tm,Co2O3掺杂后使所有陶瓷样品的第一个介电反常峰Td消失,表明Co3+抑制铁电-反铁电相变。室温下样品的介电、铁电和压电性能表明Co2O3起硬性掺杂效应。当x=7时陶瓷样品电性能最佳,其中机械品质因子Qm=498,介电损耗tanδ=2.3%(1kHz),压电常数d33=103pC/N,平面机电耦合系数kp=27%。     

CeO2、Sb2O3掺杂(Na0.88K0.12)0.5Bi0.5TiO3无铅陶瓷的压电性能研究

采用传统陶瓷的制备方法制备了CeO2(0～1.0wt%)和Sb2O3(0～0.6wt%)掺杂的(Na0.88K0.12)0.5Bi0.5TiO3无铅压电陶瓷。运用XRD技术研究了样品的晶体结构,测试并分析了样品的介电、压电性能以及谐振频率温度系数。结果表明:所有组成均呈三方结构的钙钛矿型固溶体特征。在适当掺杂剂用量范围内,压电陶瓷的压电常数、介电常数和介电损耗升高,而平面机电耦合系数降低。CeO2和Sb2O3掺杂均改善了(Na0.88K0.12)0.5Bi0.5TiO3压电陶瓷频率温度稳定性。     

施主掺杂BT-BNT陶瓷的制备及其PTC性能研究

采用溶胶凝胶法及固相法制备了A位和B位施主掺杂的(1-x)Bj0.5Na0.5TiO3-xBaTiO3(BT-BNT)陶瓷,对其介电和阻温特征进行了研究.结果表明,当BNT含量由5mol%增至40mol%时,陶瓷的居里温度由144℃逐渐增高至185℃.A位施主掺杂陶瓷表现出V型PTC特性.B位施主掺杂样品具有典型的PTC特性.当BNT加入量为5mol%、Nb205的掺入量为0.15mol%时,陶瓷的升阻比达到316.     

Y_2O_3,Fe_2O_3掺杂(Na_(0.5)Bi_(0.5))TiO_3无铅压电陶瓷的研究

采用固相法制备了(Na0.5Bi0.5)TiO3+xmol%Y2O3+xmol%Fe2O3(0≤x≤1.25)(简称NBTYF)无铅压电陶瓷。XRD衍射结果表明,所有陶瓷样品均为单一的钙钛矿结构。SEM表明,掺杂后陶瓷的晶粒尺寸增大。介电温谱表明该体系陶瓷具有弛豫特性,随掺杂量的增加,退极化温度Td向低温方向移动,而居里温度Tc向高温方向移动。陶瓷的密度和压电常数d33和随x的增加先增大后减小,而机械品质因子Qm一直下降。当x=1.00时,该体系陶瓷具有最佳压电性能,d33=106pC/N,Qm=93,kp=16.08%,εr=594,tanδ=5.33%,ρ=5.699g/cm3。     

掺杂三氧化二锑的钛酸铋钠钾陶瓷的显微结构和电学性能

采用固相合成工艺制备了（1–x）[0.82Bi0.5Na0.5TiO3–0.18Bi0.5K0.5TiO3]–xSb2O3（BNKT–xSb）压电陶瓷,研究了Sb2O3掺杂对BNKT陶瓷的显微结构和电学性能的影响规律。研究表明：Sb2O3掺杂量x小于0.020时,不改变基体的钙钛矿结构,且Sb具有可变化合价,能形成＂施主＂和＂受主＂2种掺杂而起到＂软化＂或＂硬化＂的作用。当Sb2O3掺杂量x≤0.005时,其压电系数d33随Sb2O3掺杂量的增加而增大,此时Sb2O3表现出了＂软化＂的特征;当Sb2O3掺杂量x〉0.005时,d33降低,从而又表现出了＂硬化＂的特性;当Sb2O3掺杂≥0.010时,诱使陶瓷室温下反铁电微畴的形成,导致铁电性和压电性的骤减。     

Yb_2O_3和Sm_2O_3复合掺杂对锆钛酸钡陶瓷介电性能的影响

以碳酸钡、二氧化锆、二氧化钛等为原料,以Sm_2O_3为掺杂剂和掺杂量为0.5mol%Y_2O_3的锆钛酸钡陶瓷材料为研究对象,采用传统固相法分别于1250℃、1280℃、1300℃、1330℃下制备了陶瓷样品,研究Sm_2O_3加入物对体系介电性能和微观形貌的影响。结果表明,Sm~(3+)掺杂后的陶瓷样品主晶相不变,均为钙钛矿结构;掺杂能起到改善介电常数与介电损耗的作用,随着Sm_2O_3掺杂量的增加,陶瓷样品的介电常数最高至6623.49,而介电损耗最低至0.0145;掺杂还可以改变BZT陶瓷的介电性能,居里温度向室温方向移动,当Sm_2O_3掺杂量x=0.005 mol时,陶瓷样品的介电性能最好。     

B2O3-Li2O掺杂低温烧结Ba0.6Sr0.4TiO3陶瓷的介电性能

采用传统陶瓷制备工艺,通过B2O3-Li2O的有效掺杂,低温液相烧结制备了Ba0.6Sr0.4TiO3(BST)陶瓷,并对其介电性能进行了研究.X射线衍射分析和介电性能测试结果表明:适量B2O3-Li2O掺杂的BST陶瓷,经97S℃烧结4h,所得样品的主晶相为钙钛矿结构,未出现明显的杂相;随B2O3-Li2O掺杂量的增加,BST陶瓷材料的介电常数减小,Curie峰变得弥散宽化,介电损耗则与未掺杂BST陶瓷的保持一致,即在0.003以下:适量B2O3-Li2O的掺杂对BST陶瓷材料的Curie温度和介电调制性能影响不大.     

复相陶瓷(0.5BaO0.5SrO)[(1-y)TiO2yNb2O5]的介电性能研究

通过对组成进行一定的过量控制，利用传统陶瓷工艺，成功制备了具有钙钛矿相钛酸锶钡固溶体和钨青铜相铌酸锶钡固溶体两相稳定共存的(0.5BaO0.5SrO)[(1-y)TiO2yNb2O5](BSTN)复相陶瓷.用Riguaku D/max-2400型X射线衍射仪和KEITHLEY 3330阻抗分析仪对所得样品的相结构状态及介电性能进行了测试.结果表明：Y值在0.1～0.7之间的BSTN复相陶瓷为钙钛矿相和钨青铜相两相稳定共存的复合相；在该范围以外，则为单一相的钛酸锶钡与Nb或铌酸锶钡与Ti的固溶体.复相陶瓷的介电性能取决于钙钛矿相和钨青铜相的相对含量及其固溶度，当组成y约为0.7时，介电常数达到最大值；随测试频率的提高，介电常数和损耗降低.复相陶瓷中钨青铜相的铁电/顺电相转变温度与钨青铜相中固溶TiO2量相关，随固溶量增加，转变温度降低.同时，受复相陶瓷中钙钛矿相的影响，随钙钛矿相相对含量的增加，转变温度升高；钨青铜相的最低铁电/顺电相转变温度出现在约110℃，比Sr0.5Ba0.5Nb2O6下降约240℃.     

烧结温度对PCrNi-4压电陶瓷性能的影响

采用传统固相烧结法制备Pb0.94Sr0.06（Zr0.53Ti0.47）O3＋（Ni2O3＋Cr2O3）0.1wt%＋x wt%CeO2（简称PCrNi-4）压电陶瓷,其中x取值为0,0.1,0.3和0.5,研究了烧结温度对陶瓷样品的相结构、显微结构、压电及介电性能。结果标明：所有样品相结构均为三方相与四方向共存。当烧结温度为1280℃,CeO2掺杂量为0.3 wt%时,陶瓷的晶粒大小均匀,致密性良好,具有良好的压电及介电性能（d33=375 pC/N,Kp=0.70115,εT33=1400,tgδ=0.00238）。     

Mn和Zr共掺杂钛酸锶钡/氧化镁复合陶瓷材料的微结构和介电性能

通过固相反应法制备Mn、Zr共掺杂钛酸锶钡/氧化镁陶瓷粉体,经干压成型后在空气气氛中于1450℃烧结4h,通过扫描电子显微镜和X射线衍射研究了ZrO2和MnO2共掺杂的Ba0.6Sr0.4TiO3/MgO复合陶瓷材料的微结构和介电性能。结果表明:ZrO2可以显著降低材料的介电常数和介电损耗,有效提高了陶瓷材料的温度稳定性;随ZrO2添加量的增加,体系的晶胞参数略有增加,MgO在钛酸锶钡中以独立相的形式存在;制备出的BST铁电陶瓷材料的25℃相对介电常数较低(εr<110),介质损耗小于1.0×10–3(在频率为10kHz时),温度系数小于6.012×10–3,可调性大于20%(8.0kV/mm),适用于制作移相器。     

Enhanced microstructure and electrical properties of Mn-modified Bi0.5(Na0.65K0.35)0.5TiO3 ferroelectric ceramics

Bi_0.5(Na_0.65K_0.35)_0.5TiO₃ (BNKT) and Mn-modified Bi_0.5(Na_0.65K_0.35)_0.5(Mn_xTi_1−x)O₃ (BNKMT-10³x), (x=0.0–0.5%) ferroelectric ceramics were synthesized by solid-state reaction method. Optimization of calcination temperature in Mn-doped ceramics was carried out for the removal of secondary phases observed in XRD analysis. BNKMT ceramics sintered at 1090 °C showed enhanced dielectric, piezoelectric and ferroelectric properties in comparison to pure BNKT. The average grain size was found to increase from 0.35 μm in BNKT to 0.52 μm in Bi_0.5(Na_0.65K_0.35)_0.5(Mn_0.0025Ti_0.9975)O₃ (BNKMT-2.5) ceramics. The dielectric permittivity maximum temperature (T_m) was increased to a maximum of 345 °C with Mn-modification. AC conductivity analysis was performed as a function of temperature and frequency to investigate the conduction behavior and determine activation energies. Significant high value of piezoelectric charge coefficient (d₃₃=176 pC/N) was achieved in BNKMT 2.5 ceramics. Improved temperature stability of ferroelectric behavior was observed in the temperature dependent P–E hysteresis loops as a result of Mn-incorporation. The fatigue free nature along with enhanced dielectric and ferroelectric properties make BNKMT-2.5 ceramic a promising candidate for replacing lead based ceramics in device applications.     

Dielectric,ferroelectric and field-induced strain behavior of K0.5Na0.5NbO3-modified Bi0.5(Na0.78K0.22)0.5TiO3 lead-free ceramics

Lead-free piezoelectric (1 ? x)Bi_0.5(Na_0.78K_0.22)_0.5TiO₃–xK_0.5Na_0.5NbO₃ (BNKT–xKNN, x = 0–0.10) ceramics were synthesized using a conventional, solid-state reaction method. The effect of KNN addition on BNKT ceramics was investigated through X-ray diffraction (XRD), dielectric, ferroelectric and electric field-induced strain characterizations. XRD revealed a pure perovskite phase with tetragonal symmetry in the studied composition range. As the KNN content increased, the depolarization temperature (T_d) as well as maximum dielectric constant (?_m) decreased. The addition of KNN destabilized the ferroelectric order of BNKT ceramics exhibiting a pinched-type hysteresis loop with low remnant polarization (11 μC/cm²) and small piezoelectric constant (27 pC/N) at 3 mol% KNN. As a result, at x = 0.03 a significant enhancement of 0.22% was observed in the electric field-induced strain, which corresponds to a normalized strain (S_max/E_max) of ～434 pm/V. This enhancement is attributed to the coexistence of ferroelectric and non-polar phases at room temperature.     

Microstructure,dielectric, piezoelectric,and ferroelectric properties of fine-grained 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics

For preparing fine-grained 0.94Na_0.5Bi_0.5TiO₃-0.06BaTiO₃ lead-free ferroelectric ceramics, the precursor powders were synthesized via sol-gel method and calcined at various temperatures. The precursor powders calcined at 520 °C, 550 °C, and 600 °C exhibit mean grain sizes of 30 ± 4 nm, 54 ± 3 nm, and 78 ± 5 nm, respectively. By optimizing the synthesis parameters, the fine-grained ceramics with high relative densities (>97%) and mean grain size around 100 nm were prepared. The ferroelectric, dielectric, and piezoelectric behavior were investigated. The ceramics prepared using the different precursor powders show different piezoelectric, ferroelectric, and dielectric behavior. The ceramic calcined at 550 °C and sintered at 900 °C exhibits the breakdown strength higher than 85 kV/cm, which exhibits the maximum polarization of 38.4 ± 0.3 μC/cm², remanent polarization of 20.6 ± 0.4 μC/cm².     

Composition‐ and Temperature‐Dependent Large Strain in (1−x)(0.8Bi0.5Na0.5TiO3–0.2Bi0.5K0.5TiO3)– xNaNbO3 Ceramics

Ternary solid solutions of (1 ? x)(0.8Bi_0.5Na_0.5TiO₃–0.2Bi_0.5K_0.5TiO₃)– xNaNbO₃ (BNKT–xNN) lead‐free piezoceramics were fabricated using a conventional solid‐state reaction method. Pure BNKT composition exhibited an electric‐field‐induced irreversible structural transition from pseudocubic to ferroelectric rhombohedral phase at room temperature. Accompanied with the ferroelectric‐to‐relaxor temperature T_F‐R shifted down below room temperature as the substitution of NN, a compositionally induced nonergodic‐to‐ergodic relaxor transition was presented, which featured the pinched‐shape polarization and sprout‐shape strain hysteresis loops. A strain value of ~0.445% (under a driving field of 55 kV/cm) with large normalized strain of ~810 pm/V was obtained for the composition of BNKT–0.04NN, and the large strain was attributed to the reversible electric‐field‐induced transition between ergodic relaxor and ferroelectric phase.     

铁掺杂钛酸铋钠钾陶瓷的制备及表征

采用传统固相法制备了无铅压电陶瓷Bi0.5(Na0.825K0.175)0.5TiO3+xFe2O3(x为质量分数,0、0.1%、0.3%、0.5%、0.7%、1.0%、1.5%)(简写BNKTF-x),利用X射线衍射(XRD),和扫描电子显微镜(SEM)等分析表征了该体系陶瓷的结构、介电与压电性能。XRD测试表明,在1 180℃、2 h的烧结条件下,当铁的质量分数小于1.0%时,陶瓷呈现单一相的钙钛矿结构。所有陶瓷晶粒大多呈四方晶形,晶界明显。增加铁的含量有利于晶粒生长。此外,铁的加入也使陶瓷样品气孔率降低,当铁的质量分数在0.3%左右时陶瓷的致密性最好。BNKTF-0.1%体系陶瓷具有较好的电学性能:d33=145 pC/N,kp=0.28,εr=869,tanδ=0.032,Qm=106。     

Structure and ferroelectric behaviour of Na0.5Bi0.5TiO3-KNbO3 ceramics

Lead-free piezoelectric ceramics, (1?x)Na_0.5Bi_0.5TiO₃-xKNbO₃ (NBT-xKN), with x?=?0.02–0.08 were fabricated by solid-state reaction and sintering. The crystal structures and dielectric properties were measured for different KN contents. All compositions in the unpoled, as-sintered state were found to be single-phase pseudo-cubic. However, typical ferroelectric behaviour, with well-saturated polarisation-electric field hysteresis loops, was observed for certain compositions at high electric field levels. It is shown using high-energy synchrotron X-ray diffraction that the application of the electric field induced an irreversible structural transformation from the nano-polar pseudo-cubic phase to a ferroelectric rhombohedral phase. The changes in lattice elastic strain and crystallographic texture of a poled NBT-0.02KN specimen as a function of the grain orientation, ψ, conform well to those expected for a conventional rhombohedrally distorted perovskite ferroelectric ceramic. The dielectric permittivity-temperature relationships for all compositions exhibit two transition temperatures and a frequency-dependent behaviour that is typical of a relaxor ferroelectric. The transition temperatures and grain size decrease with the increasing KN content.     

Ca掺杂对Ba0.8Sr0．2TiO3本征热释电性能的影响

以尿素（Urea）为添加剂,用溶胶一凝胶工艺在较低温（550℃）合成了钛酸锶钡粉末,在1300℃烧结成陶瓷。研究了Ca掺杂量对陶瓷结构、介电、铁电以及本征热释电性能的影响。研究显示：陶瓷样品均形成了单一的钙钛矿结构固溶体。陶瓷的本征热释电性能受Ca掺杂量影响显著。当Ca掺杂量为2at％时,陶瓷在居里点附近的本征热释电系数达670nC·cm^-1·k^-1。     

Co取代对Nd(Zn0.5Ti0.5)O3微波介质陶瓷结构与性能的影响

采用传统固相法制备Nd[(Zn1?xCox)0.5Ti0.5]O3 (0≤x≤0.9)微波介质陶瓷,研究Co2+在B位取代Zn2+对Nd(Zn0.5Ti0.5)O3微波介质陶瓷的结构和微波介电性能的影响. 结果表明,在研究的组分范围内,Nd[(Zn1?xCox)0.5Ti0.5]O3陶瓷均能形成单斜钙钛矿型固溶体,随Co取代量增加,陶瓷的相对介电常数?r逐渐减小,谐振频率温度系数?f逐渐向负值移动,品质因数Q×f先增大后下降,在x=0.3 mol时达到最大值215130 GHz, Q×f大幅增加是有序度作用所致. 在1410℃下烧结4 h, Nd[(Zn0.7Co0.3)0.5Ti0.5]O3陶瓷具有优异的微波介电性能,?r=31.2, Q×f=215130 GHz, ?f=?35.7×10?6℃?1.