Novel,low-cost jute-polyester composites. Part 1: Processing,mechanical properties,and SEM analysis

The development of high performance composites from a cheap natural fiber, jute, as reinforcement is particularly significant from an economic point of view. In this work, jute fiber-unsaturated polyester(GP) composites having appreciable mechanical properties were prepared by using solution impregnation and hot curing methods. Both unbleached (control) and bleached jute slivers with various percentages of fiber loadings were used to prepare the composites and were named JPH (C) i.e., Jute Polyester Hot Curing (control), and JPH (B) i.e., Jute Polyester Hot Curing (bleached), respectively. Mechanical properties such as tensile and flexural strain, toughness, and moduli of both the grades have been compared. Composites having 60 wt% of jute fiber yielded the best results. JPH (B) showed much better flexural properties than JPH (C), although the tensile properties of the latter were better. The inter-laminar shear strength (ILSS) of the JPH (B) was found to be higher than JPH (C). The nature of fiber-resin bonding was studied from scanning electron micrographs of the specimens subjected to tensile and flexural fracture. Dynamic mechanical properties were found to be very high, superior even to those of glass fiber reinforced composites. The flexural storage modulus was found to be 12.3 GPa at 30°C and to decrease slowly with temperature. The major finding in this work is the attainment of high mechanical properties of composite specimens with 60 wt %fiber loading. On a weight and cost basis, bleached jute fibres were found to be better reinforcements than other fibers with usual surface modification by coating or grafting processes.     

The Effect of Accelerated Weathering on the Mechanical Properties of Alkali Treated Hemp Fibre/Epoxy Composites

In this study, 65 wt% aligned untreated long hemp fibre/epoxy (AUL) and aligned alkali treated long hemp fibre/epoxy (AAL) composites cured at 70°C using compression moulding were subjected to accelerated weathering using an accelerated weathering chamber with UV-irradiation and water spray at 50°C for four different time periods (250, 500, 750 and 1000 h). After accelerated weathering, tensile strength (TS), flexural strength, Young's modulus (YM), flexural modulus and fracture toughness (K _Ic) were found to decrease and impact energy (IE) was found to increase for both AUL and AAL composites. AUL composite had greater overall reduction in mechanical properties than that for AAL composite upon exposure to accelerated weathering environment. FTIR, TGA and WAXRD analyses of the accelerated weathered composites support the results of the deterioration of mechanical properties upon exposure to accelerated weathering environment.     

Environmental durability of banana‐fiber‐reinforced phenol formaldehyde composites

We explored the environmental aging behavior of banana‐fiber‐reinforced phenol formaldehyde (PF) composites. The composites were subjected to water aging, thermal aging, soil burial, and outdoor weathering. The effects of chemical modification and hybridization with glass fibers on the degradability of the composites in different environments were analyzed. The extent of degradation was measured by changes in the weight and tensile properties after aging. Absorbed water increased the weight of water‐aged composites, and chemical treatments and hybridization decreased water absorption. The tensile strength and modulus of the banana/PF composites were increased by water aging, whereas the strength and modulus of the glass/PF composites were decreased by water aging. As the glass‐fiber loading was increased in the hybrid composites, the increase in strength by water aging was reduced, and at higher glass‐fiber loadings, a decrease in strength was observed. The tensile properties of the composites were increased by oven aging. The percentage weight loss was higher for soil‐aged samples than for samples weathered outdoors. The weight loss and tensile strength of the glass/PF composites and banana/glass/hybrid/PF composites were much lower than those of the banana/PF composites. Silane treatment, NaOH treatment, and acetylation improved the resistance of the banana/PF composites on outdoor exposure and soil burial. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2521–2531, 2006     

Ageing studies of pineapple leaf fiber–reinforced polyester composites

This experimental study evaluated the water absorption characteristics of pineapple leaf fiber (PALF)–polyester composites of different fiber content. The degree of water absorption was found to increase with fiber loading. The mechanism of diffusion was analyzed and the effect of fiber loading on the sorption kinetics was studied. The diffusion coefficient was calculated and found to increase with fiber content. Studies were also made to correlate water absorption with the cross‐sectional areas of the specimens. The effects of ageing on the tensile properties and dimensional stability of PALF polyester composites were studied under two different ageing conditions. Ageing studies showed a decrease in tensile strength of the composites. The composite specimens subjected to thermal ageing showed only a slight deterioration in strength. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 503–510, 2004     

NOVEL LOW-COST JUTE–POLYESTER COMPOSITE. II. SEM OBSERVATION OF THE FRACTURED SURFACES

The scanning electron micrographs (SEM) were taken at different magnifications with respect of the fractured surfaces of the polymer composites prepared from unsaturated polyester resin and jute sliver with 60% fiber loading by weight. The composite specimens were prepared using both untreated (control) and chemically modified (bleached) jute fibers by solution impregnation and hot curing methods and are designated as JPH-60(C) and JPH-60(B), respectively. The method of preparation of the composite specimens have been discussed. The specimens were subjected to tensile and flexural tests and the fractured surfaces were observed under SEM as stated. The fiber surface morphology was also studied from the SEM photographs in the case of the control and bleached jute filaments. The SEM photographs of the fractured surfaces of the composites showed varied extents of fiber pull-outs under both tensile and flexural failure modes. The nature of interfacial adhesion has been discussed on the basis of the SEM study. A good correlation between the SEM study and the mechanical strength properties of the composites could be established. Exceptionally high flexural strength of the composites JPH-60(B) compared to JPH-60(C) could be explained from the SEM study.     

Effects of fiber extraction,morphology, and surface modification on the mechanical properties and water absorption of bamboo fibers‐unsaturated polyester composites

Bamboo fibers reinforced unsaturated polyester (UPE) composites were prepared by compression molding. Effects of fiber extraction, morphology, and chemical modification on the mechanical properties and water absorption of the bamboo fibers‐UPE composites were investigated. Results showed that the unidirectional original bamboo fibers resulting composites demonstrated the highest tensile strength, flexural strength, and flexural modulus; the 30–40 mesh bamboo particles resulting composites had the lowest tensile strength and flexural strength, but had comparable flexural modulus with that of chemical pulp fibers. The treatment of bamboo fibers with 1,6‐diisocyanatohexane (DIH) and 2‐hydroxyethyl acrylate (HEA) significantly increased the tensile strength, flexural strength and flexural modulus, and water resistance of the resulting composites. Fourier Transform Infrared and X‐ray photoelectron spectroscopy analyses showed that DIH and HEA were covalently bonded onto bamboo fibers. Scanning electron microscopic images of the fractured surfaces of the composites showed that the treatment of bamboo fibers greatly improved the interfacial adhesion between the fibers and UPE resins. The water absorption kinetics of the composites was also investigated; and the results showed that the water absorption of the composites fitted Fickian behavior well. POLYM. COMPOS., 37:1612–1619, 2016. © 2014 Society of Plastics Engineers     

Synthesis and physicochemical study of bisphenol‐C‐formaldehyde‐toluene diisocyanate polyurethane–jute and jute–rice husk/wheat husk composites

Bisphenol‐C‐formaldehyde‐toluene‐2,4‐di isocyanate polyurethane (PU) has been synthesized at room temperature and used for the fabrication of jute and jute–rice husk/wheat husk hybrid composites. PU–jute and PU–jute–RH/WH composites were prepared under pressure of 30.4 MPa at room temperature for 8 h, while PU–jute–RH/WH composites were prepared under same pressure at 110°C for 5 h. PU–jute composite has good tensile strength and flexural strength (50–53 MPa), while PU–jute–RH/WH hybrid composites have moderate tensile strength (9–11 MPa) and a fairly good flexural strength (15–31 MPa). Composites possess 1.1–2.2 kV electric strength and 0.94–1.26 × 10¹² ohm cm volume resistivity. Water absorption in PU–jute composite is different in water (9.75%), 10% HCl (12.14%), and 10% NaCl (6.05%). Equilibrium water uptake time in salt environment is observed 96 h, while in pure water and acidic environments it is 192 h. In boiling water equilibrium water content and equilibrium time are found to be 21.7% and 3 h, respectively. Water absorption increased 2.2 times in boiling water, whereas equilibrium time reduced 64 times. Thus, PU–jute composite has excellent hydrolytic stability against boiling water, 10% HCl, and 10% NaCl solutions. Fairly good mechanical and electrical properties and excellent hydrolytic stability of composites signify their usefulness for low cost housing units and in electrical and marine industries. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2363–2370, 2006     

Bamboo fiber reinforced thermosetting resin composites: Effect of graft copolymerization of fiber with methacrylamide

Epoxy and polyester resins have been reinforced with methacrylamide (MAA) treated bamboo strip matting to develop bamboo fiber reinforced plastic composites. Bamboo mats were graft copolymerized with 1, 3, and 5% solution of MAA. The mechanical (tensile strength, elastic modulus, flexural strength, and flexural modulus), thermal, and water absorption properties of the composites were determined. One percent treatment of bamboo with MAA gave optimum results with epoxy resin. The mechanical properties were improved. TGA results reveal that the degradation temperature of the composite has improved after grafting. The weight loss of 1% MAA treated bamboo–epoxy composite reached a value of 95.132% at 795°C compared to 97.655% at 685°C of untreated bamboo–epoxy composite. Water absorption in the composites was studied by long term immersion and 2 h boiling in distilled water. The process of water absorption indicates Fickian mode of diffusion. MAA treatment results in reduced water uptake. There was improvement in the properties of pretreated bamboo‐polyester matrix composite as well. Three percent treatment of bamboo with MAA gave optimum results with polyester resin. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Mechanical properties and water absorption of fiber‐reinforced polypropylene composites prepared by bagasse and beech fiber

The present study investigates the tensile, flexural, notched Izod impact, and water absorption properties of bagasse and beech reinforced polypropylene (PP) composites as a function of fiber content. The surface of fibers was modified through the use of maleated polypropylene (MAPP) coupling agent. From this study, it was found that mechanical properties increase with an increase in fiber loading in both cases. However, the addition of wood fibers resulted in a decrease in impact strength of the composites. The water absorption property at varying fiber loading was evaluated and found maximum for the BA/PP composites. The weight gains for all specimens were less than 7%. In general, the results showed the usefulness of bagasse fiber as a good alternative and reinforcing agent for composite. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of processing method on surface and weathering characteristics of wood–flour/HDPE composites

Wood–plastic lumber is promoted as a low‐maintenance high‐durability product. When exposed to accelerated weathering, however, wood–plastic composites may experience a color change and/or loss in mechanical properties. Different methods of manufacturing wood–plastic composites lead to different surface characteristics, which can influence weathering. In this study, 50% wood–flour‐filled high‐density polyethylene (HDPE) composite samples were injection molded, extruded, or extruded and then planed, to remove the manufacturing surface characteristics. Fourier transform infrared spectroscopy was used to chemically show the difference in surface components. The samples were weathered in a xenon‐arc weathering apparatus for 1000, 2000, and 3000 h and analyzed for color fade and loss of flexural modulus of elasticity and strength. Final color (lightness) after weathering was not dependent on the manufacturing method. However, the manufacturing method was related to mechanical property loss caused by weathering. Composites with more wood component at the surface (i.e., planed samples) experienced a larger percentage of total loss in flexural modulus of elasticity and strength after weathering. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1021–1030, 2004     

Development of Silicon Carbide Reinforced Jute Epoxy Composites: Physical,Mechanical and Thermo-mechanical Characterizations

The aim of the present study was to investigate the physical and thermo-mechanical characterization of silicon carbide filled needle punch nonwoven jute fiber reinforced epoxy composites. The composite materials were prepared by mixing different weight percentages (0–15 wt.%) of silicon carbide in needle punch nonwoven jute fiber reinforced epoxy composites by hand-lay-up techniques. The physical and mechanical tests have been performed to find the void content, water absorption, hardness, tensile strength, impact strength, fracture toughness and thermo-mechanical properties of the silicon carbide filled jute epoxy composites. The results indicated that increase in silicon carbide filler from 0 to 15 wt.% in the jute epoxy composites increased the void content by 1.49 %, water absorption by 1.83 %, hardness by 39.47 %, tensile strength by 52.5 %, flexural strength by 48.5 %, and impact strength by 14.5 % but on the other hand, decreased the thermal conductivity by 11.62 %. The result also indicated that jute epoxy composites reinforced with 15 wt.% silicon carbide particulate filler presented the highest storage modulus and loss modulus as compared with the unfilled jute epoxy composite.     

Acrylic terpolymer–PVC blends with improved properties

Adhesive sealant compositions with improved properties and enhanced outdoor resistance were prepared by blending acrylic terpolymer (AT) with PVC. The morphology of these blends was studied by SEM, energy-dispersive X-ray analysis (EDXA), and DSC. The blends are heterogeneous. They consist of a continuous phase, which is either pure or mixed. AT, and a particulate phase having the morphology of the added component. The particulate phase of AT–PVC contains mixed AT. The AT–PVC blends have improved mechanical properties (e.g., ultimate tensile strength, adhesive strength, etc.). The improvement in mechanical properties is strong, probably because the added PVC has strong specific interaction capabilities with AT. Whereas the unblended AT has very low outdoor durability, the AT–PVC blends display enhanced resistance to weathering, as evidenced by substantially higher ultimate tensile strength of weathered specimens than those of the controls (unweathered).     

Effect of different surface treatments on polypropylene composites reinforced with yerba mate fibers: Physical,mechanical, chemical,and morphological properties

This study presents the preparation of post-consumer polypropylene (r-PP) composites filled with 30 wt% yerba mate (YM) stick particles. To improve the fiber–matrix adhesion, three surface treatments were performed: alkaline treatment with sodium hydroxide (NaOH) and use of 3-aminopropyltriethoxysilane (APTS) and maleic anhydride graft polypropylene copolymer (PP-g-MA) as coupling agents. Mechanical properties including tensile, flexural, and impact resistance were determined, and chemical (Fourier transform infrared spectroscopy [FTIR]), physical (water absorption), and morphological analyses were performed. The main findings show that the treatments were efficient in improving the mechanical properties of the composites, with emphasis on the r-PP/YM30/APTS and r-PP/YM30/PP-g-MA composites, which proved to be superior in tensile, flexion and impact strength and absorption of water compared to the untreated composite. The morphological analysis showed a better interaction between the fiber and the polymeric matrix for the composites with YM/APTS and YM/PP-g-MA, which corroborates the results of tensile and flexural strength, as well as with the spectra of FTIR in which the chemical modification of the fibers is observed. However, the results show that these treatments are promising in obtaining composites with recycled matrix with better properties.     

Mechanical and thermal properties of ABS and leather waste composites

To determine the possibility of using leather waste as reinforcing filler in the thermoplastic polymer composite, acrylonitrile–butadiene–styrene (ABS) as the matrix and leather buffing powder as reinforcing filler were used to prepare a particulate reinforced composite to determine testing data for the physical, mechanical, and thermal properties of the composites, according to the filler loading in respect to thermoplastic polymer. The ABS and leather powder composites were prepared by the extrusion of ABS with 2.5, 5, 7.5, 10, 12.5, and 15 wt % of leather powder in corotating twin screw extruder. The extruded strands were cut into pellets and injection molded to make specimens. These specimens were tested for physicomechanical properties like tensile and flexural strengths, tensile and flexural modulus, Izod and charpy impact strength, abrasion resistance, Rockwell hardness, density, Heat deflection temperature (HDT) and Vicat softening point (VSP), water absorption, and thermal degradation analysis. The incorporation of leather waste powder does not affect the tensile, flexural strengths, Izod impact strength, abrasion resistance, Rockwell hardness, density, HDT and VSP values drastically. However, the tensile modulus, tensile elongation, and charpy impact strength values are reduced significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3062–3066, 2006     

Effect of the delignification of wood fibers on the mechanical properties of wood fiber–polypropylene composites

The effect of the delignification of hornbeam fibers on the mechanical properties of wood fiber–polypropylene (PP) composites was studied. Original fibers and delignified fibers at three levels of delignification were mixed with PP at a weight ratio of 40:60 in an internal mixer. Maleic anhydride (0.5 wt %) as the coupling agent and dicumyl peroxide (0.1 wt %) as the initiator were applied. The produced composites were then hot‐pressed, and specimens for physical and mechanical testing were prepared. The results of the properties of the composite materials indicate that delignified fibers showed better performance in the enhancement of tensile strength and tensile modulus, whereas the hardness of the composites was unaffected by delignification. Delignified fibers also exhibited better water absorption resistance. Notched impact strength was higher for delignified fiber composites, but it was reduced at higher delignification levels. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4759–4763, 2006     

Newspaper-reinforced plastic composite laminates: Mechanical and water uptake characteristics

Several useful composite materials have been developed with natural fiber and plastic matrices, and their commercial viability has been established in terms of adding value to abundant and cheap natural resources. The Macromolecular Research Centre, Jabalpur, India, has recently developed composite from waste newspaper reinforced with plastic material using a prepreg technique wherein the matrix resin consists of resol type phenolic resin (PR) and bifunctional epoxy resin (EP) condensate. Laminates of newspaper and PR-EP condensate were prepared by hot press molding, and the newspaper weight fraction in these composites was varied from 0.30 to 0.65. The mechanical properties of five selected newspaper (PR-EP) condensate composites are reported for parameters such as ultimate tensile strength, elongation, tensile modulus, flexural strength and modulus, and heat deflection temperature (HDT). The water uptake behavior of these composites was examined by constructing water absorption isotherms, and the water diffusion coefficient and water absorption (24 h soak test) were determined. The specific tensile and flexural strengths and modulus properties of newspaper-(PR-EP) condensate composites are found comparable with one prepared elsewhere from recyclable newspaper-reinforced polypropylene thermoplastics.     

Hybrid composites from coir fibers reinforced with woven glass fabrics: Physical and mechanical evaluation

Sandwich composites based on coir fiber nonwoven mats as core material were manufactured by Vacuum Assisted Resin Transfer Molding technique. Mechanical and physical properties of produced coir/polyester and coir‐glass/polyester composites were assessed. Samples were evaluated according to their reinforcement contents, resin contents, areal density, and thickness. Tests on physical properties revealed that coir‐glass/polyester sandwich structure has the lowest values of thickness swelling, water absorption and moisture contents compared with coir/polyester composite. Mechanical tests such as tensile strength, open‐hole tensile strength, and flexural strength were also performed on all samples. Coir‐glass/polyester sandwich structure showed significant increase in tensile strength of 70 MPa compared with 8 MPa of coir/polyester composite. Introducing two skins of fiber glass woven roving to coir/polyester increased its flexural strength from 31.8 to 131.8 MPa for coir‐glass/polyester. POLYM. COMPOS., 38:2212–2220, 2017. © 2015 Society of Plastics Engineers     

Banana fiber reinforced low-density polyethylene composites: effect of chemical treatment and compatibilizer addition

In this study, an attempt has been made to utilize banana fiber (a natural fiber from agricultural waste) as reinforcement for low-density polyethylene (LDPE) to develop environmental friendly composite materials. LDPE/banana fiber composites were fabricated at different fiber loadings (10, 15, 20, 25, and 30 wt %) using compression molding technique. The composite with the composition of 25 wt % banana fiber was observed to be optimum on the basis of biodegradability and mechanical properties. Further, the effect of banana fiber surface treatment (alkali and acrylic acid) on the mechanical properties, morphology and water absorption behavior of the LDPE/banana fiber composites in the absence and presence of compatibilizer (maleic anhydride grafted LDPE, MA-g-LDPE) was comparatively studied. The alkali and acrylic acid treatment of the banana fibers led to enhanced mechanical properties and water resistance property of the composites, and these properties got further improved by the addition of the compatibilizer. The addition of compatibilizer to the acrylic acid treated banana fiber composites showed the most effective improvement in the flexural and impact strength and also, exhibited a reduction in the water absorption capacity. However, the tensile strength of the compatibilized composites with treated fibers resulted in slightly lower values than those with untreated fibers, because of the degradation of fibers by chemical attack as was evidenced by scanning electron microscopy (SEM) micrographs. SEM studies carried out on the tensile fractured surface of the specimens showed improved fiber-matrix interaction on the addition of compatibilizer.     

Polypropylene and potato starch biocomposites: Physicomechanical and thermal properties

To determine the possibility of using starch as biodegradable filler in the thermoplastic polymer matrix, starch‐filled polypropylene (PP) composites were prepared by extrusion of PP resin with 5, 10, 15, and 20 wt % of potato starch in corotating twin‐screw extruder. The extruded strands were cut into pellets and injection molded to make test specimens. These specimens were tested for physicomechanical properties such as tensile and flexural properties, Izod impact strength, density, and water absorption. These PP composites were further characterized by melt flow index (MFI), vicat softening point (VSP), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) techniques. It was found that, with increase in starch content, tensile modulus, flexural strength, and flexural modulus of the PP composites increased along with the increase in moisture, water absorption, and density, while retaining the VSP; but, tensile strength and elongation, impact strength, hardness, and MFI of the PP composites also decreased. DSC analysis of the PP composite revealed the reduction in melting temperature, heat of fusion, and percentage of crystallization of PP with increase in starch content. Similarly, TGA traces display enhanced thermal degradability for PP as starch content increases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The comparison of properties of (rubber tree seed shell flour)‐filled polypropylene and high‐density polyethylene composites

The effect of varied rubber tree seed shell flour (RSSF) filler loadings on processing torque, mechanical, thermal, water absorption, and morphological properties of polypropylene (PP) and high‐density polyethylene (HDPE) composites has been studied. The addition of RSSF in the composites increased the stabilization torque in both PP‐ and HDPE‐based composites. Tensile strength, elongation at break, flexural strength, and impact strength show significant reduction when higher loading of RSSF was incorporated, while tensile modulus and flexural modulus were improved. The phenomenon was noted for both matrices, PP and HDPE, but HDPE‐based composites showed clear effects on the reduction of the mechanical properties compared with RSSF‐filled PP. Scanning electron microscopy of tensile fracture specimens revealed the degree of dispersion of RSSF filler in the matrices. At higher filler loadings, agglomerations and poor dispersion of RSSF particles were spotted, which induce the debonding mechanism of the system. Thermogravimetric analysis thermograms showed that both PP‐ and HDPE‐based composite systems with higher RSSF content have higher thermal stability, initial degradation temperature, degradation temperature, and total weight loss. Water absorption ability of the composites increases as the filler loading increases for both matrices. J. VINYL ADDIT. TECHNOL., 22:91–99, 2016. © 2014 Society of Plastics Engineers