Preparation and swelling properties of semi‐IPN hydrogels based on chitosan‐g‐poly(acrylic acid) and phosphorylated polyvinyl alcohol

The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g^?1 in distilled water and 55 g·g^?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g^?1 in distilled water and 47 g·g^?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and swelling behaviors of semi‐IPNs superabsorbent resin based on chicken feather protein

A novel chicken feather protein‐g‐poly (potassium acrylate)/polyvinyl alcohol (CFP‐g‐PKA/PVA) semi‐IPNs superabsorbent resin (SAR) based on feather protein, acrylic acid (AA), and polyvinyl alcohol (PVA) was synthesized by graft copolymerization and semi‐interpenetrating technology. The results from FTIR, SEM, and TGA analysis showed that both CFP and PVA reacted with PKA during the polymerization process. The effects of AA, PVA, initiator and crosslinker content on water absorbency of semi‐IPNs SAR were studied. The swelling behavior in various pHs and saline solutions were also investigated. The water absorbency of SAR reached the maximum at pH = 6. The effect of the five cations on swelling had the following order: Al³⁺ > Ca²⁺ > Mg²⁺ > K⁺ > Na⁺. The highest water absorbency in distilled water and 0.9 wt % NaCl solutions were 714.22 and 70.08 g g^?1, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39748.     

Design and synthesis of superabsorbent polymers

A series of novel copolymer superabsorbents based on the monomers acrylamide (AM), acrylic acid (AA), acrylonitrile, methacrylic acid, sodium acrylate (SA), and 2‐hydroxyethyl methacrylate (HEMA) were prepared by copolymerization using ammonium persulfate as an initiator and N,N‐methylenebisacrylamide as a crosslinking agent. The experimental results of superabsorbent polymers (SAPs) show that the absorbency in water and NaCl solutions is maximum for AM, SA, HEMA and AM, AA, SA combinations. The copolymers were characterized by IR spectroscopy. The water retention of soil was also enhanced using the above superabsorbents. Use of SAPs for the growth of the croton plant was also investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2635–2639, 2001     

Synthesis and properties of carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide) as a novel cellulose‐based superabsorbent

A new cellulose‐based superabsorbent polymer, carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide), was prepared by the free‐radical grafting solution polymerization of acrylic acid (AA) and acrylamide (AM) monomers onto carboxymethyl cellulose (CMC) in the presence of N,N′‐methylenebisacrylamide as a crosslinker with a redox couple of potassium persulfate and sodium metabisulfite as an initiator. The influences of reaction variables such as the initiator content, crosslinker content, bath temperature, molar ratio of AA to AM, and weight ratio of the monomers to CMC on the water absorbency of the carboxymethylcellulose‐graft‐poly(acrylic acid‐co‐acrylamide) copolymer were investigated. The copolymer's structures were characterized with Fourier transform infrared spectroscopy. The optimum reaction conditions were obtained as follows: the bath temperature was 50°C; the molar ratio of AA to AM was 3 : 1; the mass ratio of the monomers to CMC was 4 : 1; and the weight percentages of the crosslinker and initiator with respect to the monomers were 0.75 and 1%, respectively. The maximum water absorbency of the optimized product was 920 g/g for distilled water and 85 g/g for a 0.9 wt % aqueous NaCl solution. In addition, the superabsorbent possessed good water retention and salt resistance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1382–1388, 2007     

Synthesis and Swelling Behavior of Superabsorbents Cross-Linked with N-Maleyl Chitosan

A kind of superabsorbent based on the monomers maleic anhydride (MA) and acrylic acid (AA) was prepared by solution polymerization using ammonium peroxodisulfate (AP) and sodium bisulfite (NaHSO₃) as initiator, and N-maleyl chitosan (N-MACH) as cross-linker. Effects of process parameters such as the amount of cross-linker, mass ratio of MA to AA, and neutralization degree of AA on the water absorbency of superabsorbents are discussed. The results indicated the water absorbency of superabsorbents increased and then decreased with the increase of MA content, the amount of the N-MACH cross-linker, and the neutralization degree of AA. Under the optimal conditions, the water absorbency of superabsorbents could reach l560.42 g/g and 83.7 g/g in distilled water and in 0.9% NaCl solution, respectively. In addition, to enhance the water absorbency of superabsorbents in 0.9% NaCl solution, polyvinyl alcohol (PVA) was introduced as interpenetrating polymer in the network and 2-acrylamido-2-methyl propane sulfonic acid (AMPS) was introduced as comonomer. It was proved that PVA and AMPS could effectively improve the water absorbency of superabsorbents both in distilled water and 0.9% NaCl solution.     

Studies on poly(acrylic acid)/attapulgite superabsorbent composite. I. Synthesis and characterization

A novel poly(acrylic acid)/attapulgite superabsorbent composite was synthesized by graft copolymerization reaction of acrylic acid (AA) on attapulgite micropowder using N,N′‐methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate (APS) as an initiator in aqueous solution. The effects on water absorbency of such factors as reaction temperature, initial monomer concentration, degree of neutralization of AA, amount of crosslinker, initiator, and attapulgite were investigated. These crosslinked superabsorbent composites were characterized by thermogravimetetric analysis and scanning electron microscopy. The graft copolymerization reaction of AA on attapulgite micropowder was characterized by FTIR. The water absorbencies for these superabsorbent composites in water and saline solutions were investigated and water‐retention tests were carried out. Results obtained from this study show that the water absorbency of the superabsorbent composite synthesized under optimal synthesis conditions with an attapulgite content of 10% exhibited an absorption of 1017 g H₂O/g sample and 77 g H₂O/g sample in distilled water and in 0.9 wt % NaCl solution, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1596–1603, 2004     

Synthesis,characterization and swelling behaviors of hydroxyethyl cellulose‐g‐poly(acrylic acid)/attapulgite superabsorbent composite

In this work, a series of novel hydroxyethyl cellulose‐ g‐poly(acrylic acid)/attapulgite (HEC‐g‐PAA/APT) superabsorbent composites were prepared through the graft polymerization of hydroxyethyl cellulose (HEC), partially neutralized acrylic acid (AA), and attapulgite (APT) in aqueous solution, and the composites were characterized by means of Fourier‐transform spectroscopy, scanning electron microscopy, and transmission electronmicroscopy. The effects of polymerization variables including concentrations of the initiator and crosslinker and APT content on water absorbency were studied, and the swelling properties in various pH solutions as well as the swelling kinetics in various saline solutions were also systematically evaluated. Results showed that the introduction of 5 wt% APT into HEC‐g‐PAA polymeric network could improve both water absorbency and water absorption rate of the superabsorbent composites. In addition, the superabsorbent composites retained high water absorbency over a wide pH range of 4–10, and the swelling kinetics of the superabsorbent composites in CaCl₂ and FeCl₃ solutions exhibited a remarkable overshooting phenomenon. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

Preparation of acrylic acid and AMPS cointercalated layered double hydroxide and its application for superabsorbent

This article reports the cointercalation of acrylic acid (AA) and 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) in the interlayer region of Mg₂Al layered double hydroxide (LDH) and the application of this inorganic–organic composite material in the field of water superabsorbent. The monomers of AA and AMPS were cointercalated into galleries of Mg₂Al−LDH (denoted as AA−AMPS/LDH) with various molar ratios by ion‐exchange method, which was confirmed by powder X‐ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), and elemental analysis. The polymer‐based superabsorbent was prepared through in situ free‐radical aqueous copolymerization of AA and AMPS, with AA−AMPS/LDH as additive, N,N′‐methylenebisacrylamide (NMBA) as crosslinker and potassium persulfate (KPS) as initiator. The composition of this poly(AA‐co‐AMPS)/LDH was demonstrated as a good water superabsorbent. The LDH content, water absorbency, thermal stability, and swelling rate of this superabsorbent were also investigated in detail. Results showed that the incorporation of a 5 wt % AA−AMPS/LDH into polymer matrix increased its water absorbency significantly by 27.7% (in water) and by 51.5% (in 0.9 wt % NaCl solution). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Superabsorbent polymeric materials VIII: Swelling behavior of crosslinked poly[sodium acrylate‐co‐trimethyl methacryloyloxyethyl ammonium iodide] in aqueous salt solutions

A series of xerogels based on sodium acrylate (SA), cationic comonomer, trimethyl methacryloyloxyethyl ammonium iodide (TMMAI), and N,N‐methylene‐bis‐acrylamide (NMBA) were prepared by inverse suspension polymerization. The water absorbency and the swelling behavior for these high absorbent polymers in deionized water and various saline solutions were investigated. Results indicated that the water absorbency for the present copolymer gel increased when a small amount of TMMAI monomer was introduced into the SA gel, then decreased with increase in TMMAI content. The water absorbency was 583 g H₂O/g for a gel sample in deionized water containing 2.5 × 10⁻³ molar fraction TMMAI. But a contrary result was observed for initial absorption rate, that is, the initial absorption rates increased with an increase of TMMAI in deionized water and 0.9 wt % NaCl solution. The absorbency in the chloride salt solution decreased with an increase in the ionic strength of the salt solution. Finally, the adsorption of copper ion by these gels was also investigated. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1665–1674, 2001     

Superabsorbent polymeric materials VII: Swelling behavior of crosslinked poly[sodium acrylate‐CO‐trimethyl methacrylamido‐propyl ammonium iodide] in aqueous salt solutions

A series of xerogels based on sodium acrylate (SA), cationic comonomer trimethyl methacrylamidopropyl ammonium iodide (TMMAAI), and N,N‐methylene‐bis‐acrylamide (NMBA) were prepared by inverse suspension polymerization. The water absorbency and the swelling behavior for these highly absorbent polymers in deionized water and various saline solutions were investigated. Results indicated that the water absorbency increased when a small amount of TMMAAI monomer was introduced into the SA gel. The water absorbency decreased with increase in TMMAAI content, but the contrary result was observed for initial absorption rate. Moreover, with more crosslinking agent, the water absorbency was lower. Finally, the adsorption of copper ion by these gels was also investigated. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1749–1759, 2000     

Utilization of starch and montmorrilonite for the preparation of superabsorbent nanocomposite

Starch and montmorrilonite (MMT) were used as raw materials for synthesizing starch‐graft‐poly[acrylamide (AM)–acrylic acid (AA)]/MMT superabsorbent nanocomposite by graft and intercalation copolymerization reaction of starch, AM, and AA in the presence of organic MMT micropowder in aqueous solution. Major factors affecting water absorbency such as weight ratio of monomers to starch, weight ratio of AM to AA, neutralization degree of AA, amount of crosslinker, initiator, and MMT were investigated. The superabsorbent nanocomposite synthesized under optimal synthesis conditions exhibits absorption of 1120 g H₂O/g sample and 128 g H₂O/g sample in deionized water and in 0.9 wt % NaCl solution, respectively. IR spectra showed that the graft copolymerization between  OH groups on MMT and monomers took place during the reaction, and that crystal interlayer was pulled open in the superabsorbent nanocomposite. X‐ray diffraction analysis showed that the crystal interlayer of MMT was pulled open to 2.73 nm, and thus formed nanometer exfoliation composite material. Thermogravimetric analysis showed that starch‐graft‐poly (AM–AA) superabsorbent nanocomposite (8 wt % MMT) has good thermal stability. This superabsorbent nanocomposite with excellent water absorbency and water retention, being biodegradable in nature, economical and environment friendly, could be especially useful in industry, agricultural, and horticultural applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

PVA/PAA-AM共混高吸水纤维的微观结构与吸液能力

丙烯酸(AA)、丙烯酰胺(AM)为单体,在聚乙烯醇(PVA)溶液中共聚,由聚合物溶液纺丝制备高吸水纤维。用扫描电子显微镜(SEM)观察了纤维微观结构,结果表明,高吸水纤维具有微相分离结构,纤维表面形貌和横截面形状随纤维组成变化。从吸水溶胀后经液氮冷阱干燥的纤维干凝胶的SEM照片,可以观察到纤维内部存在原纤间交联网络和大量各向异性分布的长形孔洞,证实纤维具有三维网络结构并且吸收过大量的水。随AM加入量的增加,纤维的吸液能力先上升后下降, w〔AM/(AA+AM+PVA)〕=3%时,纤维吸蒸馏水倍率为 243,吸ρ(NaCl) =9g/L的盐水溶液倍率为 58。研究表明,较多的AM会导致共混结构不相容性增加,吸水能力下降。     

Synthesis of poly(sodium acrylate‐co‐sodium 1‐(acryloyloxy) propan‐2‐yl phosphate) and comparative study on its swelling properties with poly(sodium acrylate) and poly(sodium acrylate‐co‐2‐hydroxypropyl acrylate)

A new superabsorbent copolymer, poly(sodium acrylate‐co‐sodium 1‐(acryloyloxy) propan‐2‐yl phosphate) [P(SA‐co‐SAPP)], was synthesized by a novel prepared monomer, 1‐(acryloyloxy) propan‐2‐yl phosphoryl dichloride. The swelling properties of the superabsorbent were investigated by comparison with poly(sodium acrylate) (PSA) and the copolymer of poly(sodium acrylate‐co‐2‐hydroxypropyl acrylate) [P(SA‐co‐HPA)]. The results showed that (1) the superabsorbent containing sodium 1‐(acryloyloxy) propan‐2‐yl phosphate had higher water absorbency at general testing conditions; (2) the swelling properties of P(SA‐co‐SAPP) and PSA were obviously influenced by pH of solutions, which were different from that of P(SA‐co‐HPA); (3) the swelling process and the saturated water absorbency of all superabsorbents were remarkably affected by cations, especially multivalent ones, while barely affected by anions. POLYM. ENG. SCI., 47:728–737, 2007. © 2007 Society of Plastics Engineers.     

静态溶液聚合法合成SA-IP-SPS型高吸水性树脂

采用氯磺酸磺化法制备了聚乙烯醇硫酸钠（SPS）,以工业级丙烯酸和SPS为原料采用静态溶液聚合法合成了具有良好吸水、吸盐水性能及较高热稳定性的聚丙烯酸（盐）-聚乙烯醇硫酸钠互穿网络型高吸水性树脂（SA-IP-SPS）,红外光谱、热重分析、硫含量分析结果表明了SA-IP-SPS互穿网络结构的形成.对SPS含量、PVA分子量的考察结果表明：PVA相对分子质量在90000～124000,SPS含量在3%左右时得到的SA-IP-SPS高吸水性树脂吸附性能最高（吸水900g·g^-1,吸0.9%食盐水97 g·g^-1）.     

Waste polystyrene foam‐graft‐acrylic acid/montmorillonite superabsorbent nanocomposite

A novel superabsorbent nanocomposite based on partially neutralized acrylic acid, waste polystyrene foam, and sodium type montmorillonite (Na‐MMT) powder was synthesized through emulsion polymerization using N, N′‐methylenebisacrylamide as a crosslinker, 2,2′‐azo‐bisiso‐butyronitrile, ammonium persulfate, and sodium sulfite as mixed redox initiators. The effects of such factors as amount of Na‐MMT, crosslinker, initiator, and neutralization degree on water absorbency of the superabsorbent were investigated. The composites were characterized by Fourier transform infrared spectroscope, X‐ray diffraction, thermo gravimetric analysis, and scanning electron microscope. The results show that acrylic acid monomer successfully grafted onto the polystyrene chain, the layers of Na‐MMT were exfoliated and dispersed in the composite at nano size after copolymerization. The introduction of waste polystyrene foam in the composite increased the water absorbency rate. The addition of Na‐MMT not only enhanced the thermal stability of the composites but also increased its water absorbency, and the optimal water absorbencies of distilled water and saline water (w_NaCl = 0.9%) of the nanocomposites were more than 1180 g H₂O/g and 72.6 g H₂O/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2341–2349, 2007     

Improving properties of superabsorbent composite induced by using alkaline protease hydrolyzed‐sericin (APh‐sericin)

A series of superabsorbent polymer composites based on sericin hydrolyzed with alkaline protease (AP) were prepared by grafting with acrylic acid (AA) and acrylamide (AM). The properties of the superabsorbent polymers (SAP) by using hydrolyzed sericin with different amount of alkaline protease (nAPh‐sericin) were compared. It was found that the polymer prepared from 5APh‐sericin (the mass ratio of AP to sericin was 5.0 mg g⁻¹) showed the highest graft percentage and water absorbency, this phenomenon may be attributed to the change of molecular weight of resulting sericin molecules. The molecular structure of the grafted polymers was proved by thermal gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) measurements. Comparing with PAA‐AM (poly AA‐co‐AM) and 0APh‐sericin/PAA‐AM polymer, 5APh‐sericin/PAA‐AM polymer had the most excellent water retention capacity and enzyme degradability. The morphological features of the polymers with different drying methods were evidenced by SEM images. The water absorbencies of 5APh‐sericin/PAA‐AM polymer prepared with freeze‐drying were 896 g g⁻¹ in deionized water, 424 g g⁻¹ in tap water, and 83 g g⁻¹ in 0.9 wt% aqueous NaCl solution. POLYM. COMPOS., 35:509–515, 2014. © 2013 Society of Plastics Engineers     

Superabsorbent polymer prepared using carboxymethyl cellulose derived from Ceiba pentandra (L.) Gaertn. (kapok) cotton

Superabsorbent polymers (SAPs) were synthesized by grafting acrylic acid and butyl acrylate onto carboxymethyl cellulose (CMC) modified from Ceiba pentandra (L.) Gaertn. (kapok) cotton, with N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulphate as initiator. The effect of distilled water, saline solution, and applied pressure on superabsorbent was investigated. The product exhibited the maximum water absorbency of 554 g/g in distilled water and 96 g/g in saline solution. The SAP achieved the highest water absorbency under load of 83 g/g under applied pressure of 7.6 g/cm². The kapok cotton modified cellulose‐based SAP exhibited stronger gel strength than the SAP based on commercial CMC. This is probably due to the higher grafting efficiency (78.3%) of the former. The SAP was characterized by FTIR analysis, thermogravimetric analysis, and scanning electron microscopy. Thermogravimetric analysis results showed that the SAP, with AA and BA grafted onto CMC, had better thermal stability than CMC alone. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40808.     

Synthesis of poly(acrylic acid)/sodium humate superabsorbent composite for agricultural use

A novel poly (acrylic acid)/sodium humate superabsorbent composite was synthesized by graft copolymerization reaction of acrylic acid (AA) on sodium humate micropowder using N,N′‐methylenebisacrylamide (MBA) as a crosslinker and potassium peroxydisulfate (KPS) as an initiator in aqueous solution. The effects on water absorbency of factors such as reaction temperature, initial monomer concentration, and degree of neutralization of AA, amount of crosslinker, initiator, and sodium humate were investigated. The superabsorbent composite was characterized by scanning electron microscopy, and the graft copolymerization reaction of AA on sodium humate micropowder was characterized by IR spectroscopy. Results obtained from this study show that the water absorbency of the superabsorbent composite synthesized under optimal conditions for synthesis with a sodium humate content of 5.3% exhibited absorption of 684 g H₂O/g sample in distilled water. Water‐retention in soil is enhanced by the use of the superabsorbent composite. The effect of superabsorbent composite on the growth of corn is reported. The superabsorbent composite may be of use as water management materials for agriculture purposes in desert and drought‐prone areas. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5137–5143, 2006     

瓜尔胶基高吸水性树脂的制备、溶胀行为与保水性能

以天然瓜尔胶（GG）和丙烯酸（AA）为原料,过硫酸铵（APS）为引发剂,N,N′-亚甲基双丙烯酰胺（MBA）为交联剂,采用水溶液聚合法制备了瓜尔胶接枝聚丙烯酸（GG-g-PAA）高吸水性树脂。考察了MBA浓度对树脂溶胀动力学和溶胀能力的影响,研究了树脂在不同亲水有机溶剂/水混合溶液、不同阳离子盐（NaCl、CaCl₂和FeCl₃）和阴离子盐（KNO₃、K₂SO₄和K₃PO₄）溶液中在各浓度和离子强度下的溶胀行为,测定了高吸水性树脂在室温和高温下的保水性能。结果表明,该树脂对亲水有机溶剂较为敏感,吸水倍率随着亲水有机溶剂浓度的增加迅速减小;在各种盐溶液中的吸水倍率随着离子强度的增加而下降。     

Study on superabsorbent composite. VIII. Effects of acid‐ and heat‐activated attapulgite on water absorbency of polyacrylamide/attapulgite

A novel superabsorbent composite, polyacrylamide/attapulgite, from acrylamide (AM) and attapulgite (APT), was prepared by free‐radical polymerization, using N,N′‐methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate (APS) as an initiator. The effects of hydrochloric acid (HCl) concentration, acidification time, and acidification temperature while acidifying APT and temperature and APT heat‐activation on water absorbency of the superabsorbent composite in distilled water and in 0.9 wt % NaCl solution were studied. The water absorbency first decreases with increasing the HCl concentration while acidifying APT, and then increases with further increasing the HCl concentration. Prolongation of acidification time is of benefit to the increase of water absorbency. At a given HCl concentration, water absorbency for the composite increases with increasing acidification temperature. An important increase in water absorbency was observed after incorporating heat‐activated APT into the polymeric network, reaching a maximum of 1964 g g^?1 with the APT heat‐activated at 400°C. Acid‐ and heat‐activation can influence chemical composition, crystalline structure, cation exchange capacity (CEC), and specific surface area of APT according XRF, XRD, FTIR analysis, and physicochemical properties test, and then on water absorbency of corresponding PAM/APT superabsorbent composite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2419–2424, 2007