Use of amidoximated acrylonitrile/N‐vinyl 2‐pyrrolidone interpenetrating polymer networks for uranyl ion adsorption from aqueous systems

Poly(N‐vinyl 2‐pyrrolidone) (PVP)/acrylonitrile (AN) interpenetrating polymer networks (IPNs) were synthesized and amidoximated for the purpose of uranyl ion adsorption. The adsorption of amidoximated IPNs was studied from different uranyl ion solutions (850, 1000, 1200, 1400, and 1600 ppm). The result of all our adsorption studies showed that the bonding between UO‐amidoxime groups complied with the Langmuir‐type isotherm. The adsorption capacity was found as 0.75 g UO/g dry amidoximated IPN. In order to increase the UO ion adsorption capacity the amidoximated IPN was treated with alkali, but no significant increase could be observed. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2324–2329, 2001     

Electrochemical synthesis and properties of poly(3‐methylthiophene): Novel synthesis of poly(3‐methylthiophene) with pentachlorostannate and hexachloroantimonate

Poly(3‐methylthiophene) (P3‐MeT) doped with different anions were prepared electrochemically in the presence of tetraalkylammonium salts. The new poly(3‐methylthiophene) SnCl and SbCl (P3‐MeT SnCl₅ and P3‐MeT SbCl₆) were prepared electrochemically using tetra‐n‐butylammonium pentachlorostannate and tetra‐n‐butylammonium hexachloroantimonate as the supporting electrolytes. The effect of current density, salt concentration, reaction temperature, and the nature of solvents on the polymer yield and polymer conductivities have been investigated. Cyclic voltammetry of poly(3‐methylthiophene) has been examined at platinum electrode in 1,2‐dichloroethane medium containing n‐Bu₄NSnCl₅, Bu₄NSbCl₆, and Bu₄NClO₄ as the supporting electrolytes in the range of −1.0 to 1.7 V versus SCE in the presence and absence of 3‐methylthiophene. Electrical conductivity, magnetic susceptibility measurements, and structural determination by elemental analysis and infrared studies were also made. Scanning electron microscopy revealed a globular, branched, fibrous and a spongy, fibrous morphology of poly(3‐methylthiophene) SnCl, ClO, and SbCl, respectively. The thermal analysis of the polymers was also investigated. Possible causes for the observed lower conductivity of these polymers have also been discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 91–102, 1999     

Mass transport process for the adsorption of Cr(VI) onto water‐insoluble cationic starch synthetic polymers in aqueous systems

Dynamic adsorption behaviors between Cr(VI) ion and water‐insoluble amphoteric starches was investigated. It was found that the HCrO ion predominates over the initial pH ∼ 2–4, the CrO ion predominates over the initial pH ∼ 10–12, and both ions coexist over the initial pH ∼ 6–8. The sorption process occurs in two stages: the external mass transport process occurs in the early stage and the intraparticle diffusion process occurs in the long‐term stage. The diffusion coefficient of the early stage (D₁) is larger than that of the long‐term stage (D₂) for the initial pH 4 and pH 10. The diffusion rate of HCrO ion is faster than that of CrO ion for both processes. The D₁ and D₂ values are ∼ 1.38 × 10⁻⁷–10.1 × 10⁻⁷ and ∼ 0.41 × 10⁻⁷–1.60 × 10⁻⁷ cm² s⁻¹, respectively. The ion diffusion rate in both processes is concentration dependent and decreases with increasing initial concentration. The diffusion rate of HCrO ion is more concentration dependent than that of CrO ion for the external mass transport process. In the intraparticle diffusion process, the concentration dependence of the diffusion rate of HCrO and CrO ions is about the same. The external mass transport and intraparticle diffusion processes are endothermic and exothermic, respectively, for the initial pH 4 and pH 10. The k_d values of the external mass transport and intraparticle diffusion processes are ∼ 15.20–30.45 and ∼ −3.53 to −12.67 kJ mol⁻¹, respectively. The diffusion rate of HCrO ion is more temperature dependent than that of CrO ion for both processes. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2409–2418, 1999     

Effect of pH,ionic strength,and temperature on uranyl ion adsorption by poly(N‐vinyl 2‐pyrrolidone‐g‐tartaric acid) hydrogels

Poly‐electrolyte N‐vinyl 2‐pyrrolidone‐g‐tartaric acid (PVP‐g‐TA) hydrogels with varying compositions were prepared in the form of rods from ternary mixtures of N‐vinyl 2‐pyrrolidone/tartaric acid/water. The effect of external stimuli, such as the solution pH, ionic strength, and temperature, on uranyl adsorption by these hydrogels was investigated. Uranyl adsorption capacities of the hydrogels were determined to be 53.2–72.2 (mg UO/g dry gel) at pH 1.8, and 35.3–60.7 (mg UO/g dry gel) at pH 3.8, depending on the amount of TA in the hydrogel. The adsorption studies have shown that the temperature and the ionic strength of the swelling solution also influence uranyl ion adsorption by PVP‐g‐TA hydrogels. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2219–2226, 2000     

Synthesis and electrochemistry of grafted copolymers of cellulose with 4-vinylpyridine, 1-vinylimidazole, 1-vinyl-2-pyrrolidinone,and 9-vinylcarbazole

Some new cellulosic materials, suitable for the adsorption of noble metal ions, were syn-thesized by chemical and electrochemical modification of cellulose. The polymerizable groups were introduced in cellulose with ∼ 80% yield of substitution by esterification with acryloyl chloride. The vinyl monomers (4-vinylpyridine, 1-vinylimidazole, 1-vinyl-2-pyrrolidinone, and 9-vinylcarbazole) were readily grafted into cellulose acrylate via radical polymerization in acetonitrile. The grafted copolymers of cellulose with 4-vinylpyridine and 4-vinylimidazole were reacted with methyl iodide and the corresponding 1-methylpyridinium iodide ( 6 ) and 3-methylimidazolium iodide ( 7 ) copolymers of cellulose were obtained. Copolymers 6 and 7 were transformed into new polymeric regents, differing in anions (ClO, CF₃COO⁻, NO, p-TsO⁻, BF, PF) by using a supporting electrolyte carrying the desired anions through the ion-exchange-electrochemical oxidation of the released iodide at a controlled anodic potential. © 1996 John Wiley & Sons, Inc.     

Influence of anionic form on thermal degradation of TMAHP–cellulose

Trimethylammoniumhydroxypropyl (TMAHP)–cellulose in 10 anionic forms (F^?, Cl^?, Br^?, I^?, HSO, NO, OH^?, HCO, H₂PO, CH₃COO^?) was prepared, and the influence of each anion on thermal degradation in inert atmosphere was studied. With the help of dynamic and isothermal thermogravimetry (TG) it was found that H₂PO ions had the greatest retarding effect on TMAHP–cellulose degradation. From the values of rate constants it can be seen that all ionic forms of TMAHP–cellulose have the starting rate of thermal degradation greater than unmodified cellulose. The calculated values of activation energy of thermal degradation for different ionic forms are decreasing in following sequence: H₂PO > F^? > NO > I^? > Br^? > HCO > Cl^? > HSO > OH^? > unmodified cellulose > CH₃COO^?. From the results of pyrolyse measurements in combination with gas chromatography and mass spectrometry (Py–GC–MS) it follows that the products of the elimination of quarternary ammonium salts are trimethylamine, 3-hydroxy-2-propanone, and, in the case of OH^? form, water. In all other ionic forms the third product is the corresponding acid.     

Forced oscillations in continuous flow stirred tank reactors with nonlinear step growth polymerization

The self-step growth polymerization of RA_f monomers in homogeneous, continuous flow stirred tank reactors (HCSTRs) is simulated under conditions of periodic feed concentration (with frequency ω and amplitude α). By having periodic operation, the polydispersity index of the polymer is found to increase by about 35% over the values at steady state. Periodic operation of HCSTRs is found to lead to gelation only for certain values of the frequency and the dimensionless residence time τ^*. Gelling envelopes have been obtained to give conditions under which HCSTRs should be operated. These envelopes can be described in terms of two critical dimensionless residence times, τ and τ such that nongelling operation is always ensured when τ^* < τ. For τ^* > τ, periodic operation always leads to gelation, and HCSTRs cannot be used. For τ < τ^* < τ, the gelling behavior is found to depend on the functionality f, amplitude α, and the dimensionless residence time τ^*.     

Competitive adsorption of uranyl ions in the presence of Pb(II) and Cd(II) ions by poly(glycidyl methacrylate) microbeads carrying amidoxime groups and polarographic determination

The adsorption capacity of UO in the presence of Pb(II) and Cd(II) ions was investigated with amidoximated poly(glycidyl methacrylate) (PGMA) microbeads with an average size of 135 μm packed in a glass column (0.5‐cm i.d. and 20‐cm length, flow rate = 3 mL/min) under competitive conditions. A differential pulse polarography technique was used for the determination of trace quantities of uptaken elements by the measurement of the reduction peak currents at ?200/?950, ?400, and ?600 mV (vs a saturated calomel electrode) for UO, Pb(II), and Cd(II) ions, respectively. When only UO was found in the eluate, its adsorption was 85.3% from a 50 μM initial solution. However, when there was UO with binary systems of Pb(II) or Cd(II), it was 78.2 and 76.3%, respectively. On the other hand, in a ternary mixture of UO with Pb(II) and Cd(II), the adsorption was found to be 75.2% with the same initial concentration. According to the results, the competitive adsorption studies showed that these amidoximated PGMA microbeads had good adsorption selectivity for UO with the coexistence of Pb(II) and Cd(II) ions. The ionic strength of the solution also influenced the UO adsorption capacity of the amidoximated PGMA microbeads. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4168–4172, 2007     

Synthesis,characterization, and thermodynamic properties of poly(3‐mesityl‐2‐hydroxypropyl methacrylate)

Poly(3‐mesityl‐2‐hydroxypropyl methacrylate) (PMHPMA) was synthesized in a 1,4‐dioxane solution with 2,2′‐azobisisobutyronitrile as the initiator at 60°C. The homopolymer and its monomer were characterized with ¹H‐ and ¹³C‐NMR, Fourier transform infrared, differential scanning calorimetry, thermogravimetric analysis, size exclusion chromatography, and elemental analysis techniques. According to size exclusion chromatography analysis, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of PMHPMA were 65,864 g/mol, 215,375 g/mol, and 3.275, respectively. According to thermogravimetric analysis, the carbonaceous residue value of PMHPMA was 14% at 500°C. The values of the specific retention volume, adsorption enthalpy, sorption enthalpy, sorption free energy, sorption entropy, partial molar free energy, partial molar heat of mixing, weight fraction activity coefficient of solute probes at infinite dilution (Ω), and Flory–Huggins interaction parameter (χ) were calculated for the interactions of PMHPMA with selected alcohols and alkanes by the inverse gas chromatography method at various temperatures. According to Ω and χ, selected alcohols and alkanes were nonsolvents for PMHPMA at 423–453 K. Also, the solubility parameter of PMHPMA (δ₂) was found to be 24.24 and 26.33 (J/cm³)^0.5 from the slope and intercept of (δ/RT) ? χ/V₁ = (2δ₂/RT)δ₁ ? δ/RT at 443 K, respectively [where δ₁ is the solubility parameter of the probe, V₁ is the molar volume of the solute, T is the column temperature (K), and R is the universal gas constant]. The glass‐transition temperature of PMHPMA was found to be 386 and 385 K by inverse gas chromatography and differential scanning calorimetry techniques, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 101–109, 2006     

Several features of vinyl chloride–diallyl phthalate suspension copolymerization

Vinyl chloride–diallyl phthalate (VC–DAP) suspension copolymerization was carried out in a 5‐L autoclave and 200‐mL stainless steel vessel at 45°C. The apparent reactivity ratios of VC–DAP suspension copolymerization system were calculated as r_VC = 0.77 and r_DAP = 0.37. It shows that VC–DAP copolymer contains no gel when the feed concentration of DAP (f) is lower than a critical concentration (f_cr, inside the range of 0.466–0.493 mmol/mol VC at 80–85% conversion), the polymerization degree (DP) of copolymer increases with the increase of f and conversion. VC–DAP copolymer is composed of gel and sol fractions when f is larger than f_cr. The DP of sol fraction decreases as f increases, but the gel content and the crosslinking density of gel increase. The gel content also increases as conversion increases. The results also show that the index of polydispersity of molecular weight of sol changes with f, a maximum value appears when f is close to f_cr. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 156–162, 2000     

Intrinsic birefringence of nylon 6

Different values are reported in the literature for the intrinsic birefringence of the crystalline (Δn) and the amorphous (Δn) phases in nylon 6. Mostly, these values have either been determined by extrapolation (and then it is assumed that Δn = Δn) or calculated theoretically. In this study, intrinsic birefringence values Δn and Δn for nylon 6 were determined using the Samuels two-phase model which correlates sonic modulus with structural parameters. Three series of fiber samples were used: (1) isotropic samples of different degrees of crystallinity for estimation of E and E moduli at two temperatures. The following modulus values were obtained: 1.62 × 10⁹ and 6.66 × 10⁹ N/m² for 28.5°C, and 1.81 × 10⁹ and 6.71 × 10⁹ N/m² for ?20°C; (2) anisotropic, amorphous fiber samples for estimation of Δn = 0.076 and E = 1.63 × 10⁹ N/m² at 28.5°C; (3) semicrystalline samples of various draw ratios for estimations of Δn = 0.089 and Δn = 0.078. All measurements were carried out with carefully dried samples to avoid erroneous results caused by moisture.     

The viscoelastic properties of rubber–resin blends. III. The effect of resin concentration

The viscoelastic properties of a rubber–resin blend, which influences performance of the blend as a pressure-sensitive adhesive, depend upon the structure of the resin as well as its molecular weight. The effect of the concentration of a compatible resin in the blend was examined using a mechanical spectrometer. Four types of resins were used. These are the rosin esters, polyterpenes, pure monomer resins such as polystyrene and poly(vinyl cyclohexane), and petroleum stream resins. Each was examined in blends with both natural rubber and styrene–butadiene rubber over a range of concentrations. It is shown that the temperature of the tan δ peak for compatible systems can be predicted by the Fox equation, T = W₁T + W₂T, where W₁ and W₂ are the weight fractions of the resin and rubber, respectively, and the T_g's are the tan δ peak temperatures in K. The plateau modulus G for a blend can be identified as the G′ value in the rubbery plateau at the point where tan δ is at a minimum. The relationship between G and G, the plateau modulus for the undiluted elastomer, is shown to be proportional to the volume fraction of the elastomer raised to the 2.3–2.4 power for natural rubber with six different compatible resins. The exponent for styrene–butadiene rubber is 2.5–2.6 with four different resins. Using these relationships, both the tan δ peak temperature and plateau modulus can be predicted for a rubber–resin system from data on the unmodified elastomer and on one typical rubber–resin blend.     

Elastic characteristics of branched-network polymers

The computed dependencies of elastic characteristics of branched-network polymers were obtained on the basis of the Takayanagi series model. The moduli ratio (λ) for branched-network and branched polymers increases as a result of an increase of the moduli ratio of network and branched phases (E/E) and the network phase fraction (V_net). The λ-increase as a function of V_net is larger than in the case of the E/E dependence. On the basis of computed dependencies, the experimental results for the radiation crosslinked SBS block copolymer were considered. The experimental results agree with the computed de-pendencies for the hetergeneous branched-network polymers with E/E ≈︁ 20. The influence of entanglements on the elastic characteristics of branched-network polymers is discussed. © 1996 John Wiley & Sons, Inc.     

Atom‐transfer radical polymerization of methyl methacrylate with α,α′‐dichloroxylene/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system under microwave irradiation

The atom‐transfer radical polymerization (ATRP) of methyl methacrylate (MMA), using α,α′‐dichloroxylene as initiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst was successfully carried out under microwave irradiation (MI). The polymerization of MMA under MI showed linear first‐order rate plots, a linear increase of the number‐average molecular weight with conversion, and low polydispersities, which indicated that the ATRP of MMA was controlled. Using the same experimental conditions, the apparent rate constant (k) under MI (k = 7.6 × 10^?4 s^?1) was higher than that under conventional heating (k = 5.3 × 10^?5 s^?1). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2189–2195, 2004     

The effect of gel composition on the uranyl ions adsorption capacity of poly(N‐vinyl 2‐pyrrolidone‐g‐citric acid) hydrogels prepared by gamma rays

Poly(N‐vinyl 2‐pyrrolidone‐g‐citric acid) (PVP‐g‐CA) hydrogels with varying compositions were prepared from ternary mixtures of N‐vinyl 2‐pyrrolidone–citric acid–water by using ⁶⁰Co γ‐rays. The effect of gel composition on the uranyl ions adsorption capacity of PVP‐g‐CA hydrogels was investigated. Uranyl adsorption capacity of these hydrogels were found to be in the range of 18–144 mg [UO]/g dry gel from the aqueous solution of uranyl nitrate and 22–156 mg [UO]/g dry gel from the aqueous solution of uranyl acetate, depending on the content of citric acid in the hydrogel, while poly(N‐vinyl 2‐pyrrolidone) hydrogel did not sorb any uranyl ion. The swelling of PVP‐g‐CA hydrogel containing 2.7 mol % CA was observed in water (1620%), in uranyl acetate solution (1450%) and in uranyl nitrate solution (1360%), as compared to 700% swelling of pure PVP hydrogels. The diffusion coefficients were varied from 12.57 up to 4.04 • 10⁻⁸ m² s⁻¹. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1037–1043, 2000     

Morphological studies of the modified materials: Low-density polyethylene/poly(acrylic acid)/europium(III) and low-density polyethylene/poly(acrylic acid)/uranyl ion

The morphology of low-density polyethylene (LDPE) modified by in situ sorption and thermal polymerization of acrylic acid (AA) in the matrix was examined. The microstructure of the LDPE/poly(acrylic acid) (PAA) materials after Eu³⁺ and UO ion exchange was investigated. The phase behavior of these materials was analyzed using X-ray diffraction, scanning electron microscopy (SEM), and thermal measurements (DSC). The X-ray dif-fraction studies showed that PAA is located at amorphous region of the matrix. The LDPE/PAA surface, as investigate by SEM, was apparently homogeneous before and after Eu³⁺ and UO ion exchange, respectively. Two T_g values were found for the LDPE/PAA material before and after Eu³⁺ ion exchange. Also, three and four T_g values were found for LDPE/PAA after UO ion exchange depending on the amount of UO in the modified matrix. This indicates microphase domains in the LPDE/PAA-, LPDE/PAA/Eu³⁺-, and LPDE/PAA/UO -modified materials, although a lack of visible phase separation in the micrographs was observed. © 1996 John Wiley & Sons, Inc.     

Structure and properties of poly(vinyl alcohol)–iodine complex formed in the crystal phase of poly(vinyl alcohol) films

The structure and optical properties of the complex formed in the crystal phase of PVA that is caused by soaking at very high iodine concentration are investigated. In the resonance Raman spectra of lightly and heavily iodinated specimens, two Raman shifts appeared at 109 and 161 cm^?1. The 109 cm^?1 peak due to the I mode was much stronger than the 161 cm^?1 peak in a heavily iodinated specimen, whereas the peak was comparable with the 161 cm^?1 peak in a lightly iodinated specimen. The complex formed in the crystal phase is identified as the I mode complex. It has an averaged iodine–iodine distance of 3.2 Å, which is different from the 3.08 Å of the I mode complex formed in the amorphous phase. The effect of KI concentration in the soaking solution on the formation of the complex is also examined. The increased KI concentration in the soaking solutions at a fixed iodine concentration increases the amount of the complex formed in the crystal phase. The change in the hydrogen-bonding state in the crystal phase with the complex formation can be evidenced by IR and NMR. © 1994 John Wiley & Sons, Inc.     

Influence of anionic form on thermooxidation of TMAHP–cellulose

With the help of DTA, DTG elementary analysis of carbonized residues and ESR spectroscopy the influence of anionic form on thermooxidation of trimethylammoniumhydroxyprophyl (TMAHP)–cellulose was studied. At 300°C the percentage of carbon in carbonized residue thermolyzed in oxidative atmosphere is higher than for the sample degraded in inert atmosphere. The percentage of hydrogen decreases simultaneously. The concentration of free radicals in thermolyzed residue also increases due to the presence of oxygen. We propose that oxygen is abstracting the hydrogen atoms from polysaccharide and unpaired electrons on carbon atoms are produced. At 400°C the percentage of carbon in residues prepared at inert atmosphere is higher than for residue formed at oxidative atmosphere. Also the concentration of free radicals in thermolyzed residues obtained in inert atmosphere is greater than for those from oxidative ones. That is why suppose that at this temperature oxygen is bonded to polysaccharide residue and free radicals are terminated. From the semiquantitative DTA we can make the following sequence of samples according to their increasing thermooxidative effect: unmodified cellulose < A–HSO < A–Br^? < A–I^? < A–NO < A–H₂PO < A–CH₃COO^? < A–HCO < A–F^? < A–Cl^?1 < A–OH^p?.     

Graft copolymer–metal complexes obtained by radiation grafting on polyethylene film

Radiation induced grafting of acrylic acid onto polyethylene film was investigated. The grafted films rapidly adsorbed Cu²⁺, Cd²⁺, Th⁴⁺, and UO ions in high efficiency. The carboxylic acid groups on AAc‐grafted PE film acted as a chelating site for the selected metal ions. Complex formation of metal ions and carboxylic acid group on PE film were investigated by IR, UV/VIS and x‐ray photoelectrons spectroscopy (XPS). Electrical conductivity and thermal properties of the graft copolymer‐metal complexes onto PE film were also investigated. The application of such prepared graft copolymer‐metal complexes in the field of semiconductor may be interest. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 500–508, 2000