Homogeneous complex solution formed through interactions of poly(acrylamide‐co‐acrylic acid)/poly(acrylamide‐co‐dimethyldiallylammonium chloride) complex with M n+ hydration metal ions in aqueous media

A homogeneous complex solution, formed through inter‐polyelectrolyte complexation of poly(acrylamide‐co‐acrylic acid) (P(AM‐AA)) with poly(acrylamide‐co‐dimethyldiallylammonium chloride) (P(AM‐DMDAAC)) and interaction of the P(AM‐AA)/P(AM‐DMDAAC) complex with M ⁿ⁺ hydrated metal ion, was prepared and the structure and properties of the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ homogeneous complex solution were studied by UV spectrometry, dynamic light scattering and viscometry. The experimental results show that the homogeneous complex solution can be obtained by controlling the composition of the P(AM‐AA)/P(AM‐DMDAAC) complex and the M ⁿ⁺ metal ion content. Compared to the constituents, ie the P(AM‐AA) solution, the P(AM‐DMDAAC) solution and the P(AM‐AA)/P(AM‐DMDAAC) complex solution, the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ complex solution has a new peak at 270 nm in its UV spectrum, a larger hydrodynamic radius, and hence a higher solution viscosity, all of which indicate that there exist specific interactions between polymers and M ⁿ⁺ metal ions. These interactions lead to the formation of a network structure and hence an obvious increase not only in solution viscosity but also in resistance of the polymer solution to simple salts, to temperature changes and to shearing. © 2001 Society of Chemical Industry     

Viscosity properties of homogeneous polyelectrolyte complex solutions from sodium carboxymethyl cellulose and poly(acrylamide‐co‐dimethyldiallylammonium chloride)

The viscosity properties of homogeneous polyelectrolyte complex solutions of sodium carboxymethyl cellulose (CMC) and poly(acrylamide‐co‐dimethyldiallylammonium chloride) have been investigated by means of a rotation viscometer at different complexation ratios, shear rates and temperatures. Compared with aqueous solutions of the component polyelectrolytes, such complex solutions can afford substantially increased viscosities at the complexation ratios examined, together with enhanced shear‐thinning rheology and temperature stability. According to this study, it is possible to improve the viscosity properties of water‐soluble polymers by homogeneous interpolyelectrolyte complexation in aqueous solutions. © 2000 Society of Chemical Industry     

Application of FTIR spectroscopy for structural characterization of ternary poly(acrylic acid)–metal–poly(vinyl pyrrolidone) complexes

The FTIR spectroscopic technique was used in the study of ternary polymer–metal complexes containing two polyelectrolytes of opposite charge and metal ions. The structure of the ternary (PAA‐Fe³⁺‐PVP) complexes was examined by following the changes in their infrared spectra. It was found that the shapes of the absorption bands of the resultant compounds are influenced by the presence of Fe³⁺. According to this result it was suggested that two types of structure which differ in the composition are formed, one of which results from the coordination of Fe³⁺ with PAA‐PVP complex and the other is due to the formation of Fe³⁺ polycarboxylate. Comparison between the spectrum of PAA‐PVP complex and those of the compounds resulted from the reaction between the two opposite charged electrolytes, PAA and PVP and each of the divalent metal chlorides NiCl₂, CoCl₂, CuCl₂, and ZnCl₂) led to the conclusion that a reaction took place between the divalent transition metal chlorides and the extent of reaction depends on the nature of metal ions and PAA‐PVP complex. The FTIR spectra of the precipitate resulted from the mixtures of PAA‐PVP and Ni(NO₃)₂ or Sr(NO₃)₂ were investigated. It was noted that the addition of Ni(NO₃)₂ or Sr(NO₃)₂ to the mixture of the electrolytes of PAA and PVP provoked appreciable changes in the characteristic spectral features of the complex resulting from the interaction of the metal ions with the polymer–polymer complex. The FTIR spectra of the precipitate resulted from the reaction between CeCl₃, ErCl₃, and LaCl₃ were also investigated. It was concluded that a reaction took place between the rare earth metals and the PPC. This means that ternary polymer–metal–polymer complexes were formed. The extent of changes in the spectral features differs from metal to metal according to the nature of metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Thermal behavior of poly(acrylic acid)–poly(vinyl pyrrolidone) and poly(acrylic acid)–metal–poly(vinyl pyrrolidone) complexes

Thermal analysis (TGA and DTA) of samples of PAA, PVP, PAA–PVP complexes, containing different weight fractions of PAA and ternary polymer–metal–polymer complexes, were studied. The activation energy parameters for the thermal degradation were also calculated. The study of the effect of FeCl₃, NiCl₂, and Ni(NO₃)₂ on the TGA and DTA curves of the complexes showed that the decompositions are dependent on the concentrations and the nature of the metal ions. The DTA traces of PAA–PVP complex containing FeCl₃, NiCl₂, and Ni(NO₃)₂ showed that the treatment of the complex with these metal ions causes considerable changes in the thermal decomposition of PAA–PVP complex. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4049–4057, 2006     

Effect of acrylic acid on the properties of recycled poly(vinyl chloride)/acrylonitrile–butadiene rubber blends

The effect of acrylic acid (AAc) on the torque, stabilization torque, mechanical energy, swelling behavior, mechanical properties, thermal stability, and morphological characteristics of recycled poly(vinyl chloride)/acrylonitrile–butadiene rubber (PVCr/NBR) blends was studied. The blends were melt mixed at a temperature of 150°C and rotor speed of 50 rpm. AAc was used to improve the compatibility of PVCr/NBR blends. Virgin PVCv/NBR blends were prepared to provide a comparison. It was found that PVCr/NBR + AAc blends exhibit higher stabilization torque, mechanical energy, stress at peak, and stress at 100% elongation, but lower elongation at break and swelling index than those of PVCr/NBR and PVCv/NBR blends. SEM study of the tensile fracture surfaces of the blends indicated that the presence of AAc increased the interfacial interaction between PVCr and NBR phases, thus improving the compatibility between PVCr and NBR phases. However, thermal gravimetry analysis of the blends showed that the presence of AAc decreased the thermal stability of PVCr/NBR blends. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2181–2191, 2005     

Electrical conductivity of poly(acrylic acid)–polyacrylamide complexes

The conduction mechanism in the interpolymer complex resulting from the interaction between poly(acrylic acid) (PAA) and polyacrylamide (PAAm) was investigated. The characteristic features of the relation between the logarithm of conductivity, log σ, and 1/T are different from those corresponding to the individual components of the complex. The value of σ for the complex was found to be less than its corresponding values for PAA or PAAm. The effects of the weight fraction of each polymer and the ionic strength of the solutions on the conductivity of the complex were also studied. The data showed that the σ of the complex depends on the weight fraction of the polymers. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 2049–2055, 1998     

A supramolecular structured complex of poly(acrylic acid) and polystyrene‐block‐poly(vinylbenzyltrimethylammonium chloride)

Complexation of poly(acrylic acid) (PAA) by polystyrene‐block‐poly(vinylbenzyltrimethylammonium chloride) (PS‐b‐VB) results in a mesomorphously ordered material with a glass transition temperature of 71 °C. The complex is assumed to consist of hexagonally‐ordered ion‐rich cylindrical rods containing the PAA embedded in a polystyrene matrix. It has been shown by small‐angle X‐ray scattering (SAXS) analysis that the mesophase is characterized by sharp phase boundaries between ionic and non‐ionic regions. The structure parameters are evaluated by using a two‐dimensional interface distribution function resulting in an average cylinder radius in the range 3.0–3.5 nm and a lattice constant of 14 nm. The radius distribution is calculated to be relatively broad, which is found to be consistant with sharp phase boundaries. PS‐b‐VB‐PAA represents an example of a new type of polymeric hybrid material with a supramolecular ordered ionic–non‐ionic nanostructure. © 2000 Society of Chemical Industry     

Preparation and characterization of poly(dimethyldiallylammonium chloride) with high molar mass using high purity industrial monomer

A preparation method for high molar mass poly(dimethyldiallylammonium chloride) (PDMDAAC) is reported in this article. PDMDAAC was prepared by using the high purity industrial grade dimethyldiallylammonium chloride (DMDAAC) monomer from one‐step method and ammonium persulphate (APS) as the initiator. The initiator was added all at once and the reaction temperature was increased stepwise to complete the polymerization gradually. The effects of several polymerization condition variables on the intrinsic viscosity value ([η]) and monomer conversion rate (Conv.) of product PDMDAAC were investigated, respectively. The variables included: T₁ (42.0 to 52.0°C), T₂ (47.5 to 57.5°C), T₃ (55.0 to 75.0°C), m(DMDAAC) (60.0 to 70.0%), m(APS) : m(DMDAAC) (0.25 to 0.45%), m(Na₄EDTA) : m(DMDAAC) (0 to 0.0071%). Under an optimum condition of T₁ = 46.0°C, T₂ = 52.5°C, T₃ = 65.0°C, m(DMDAAC) = 65.0%, m(APS) : m(DMDAAC) = 0.35%, m(Na₄EDTA) : m(DMDAAC) = 0.0035%, the maximum [η] of obtained product PDMDAAC reached 3.43 dL/g, at a Conv. of 100.00%. The M_w of the product measured with GPC‐MALLS was 1.034 × 10⁶, polydespersity M_w/M_n was 2.421, and the R_g was 60.3 nm. The structure and properties of products were characterized by FTIR and NMR. Thermal decomposition was determined by TGA‐DSC. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Swelling–deswelling behavior of poly(acrylamide‐co‐maleic acid) hydrogels

In this study the poly(acrylamide‐co‐maleic acid) hydrogels containing small amounts of maleic acid have been synthesized, and the effect of pH, ionic strength, and nature of counterions on the equilibrium water uptake has been investigated. The incorporation of small amount of maleic acid results in the transition of swelling mechanism from Fickian to non‐Fickian. The equilibrium mass swelling has been found to increase with pH of the swelling medium while increase in ionic strength causes a decrease in the swelling. The amount of maleic acid present in the hydrogel affects the swelling behavior in rather an unusual way. With lower acid contents, the equilibrium mass swelling increases while higher concentrations of maleic acid cause a decrease in the degree of swelling. The hydrogels have been found to undergo a number of swelling–deswelling cycles when pH of the swelling medium changes from 8.0 to 2.0. Hydrogels require more time to deswell compared to the time required for swelling, which has been explained on the basis of the fact that gels follow different mechanisms for the two processes. Various swelling parameters such as equilibrium mass swelling, diffusion coefficient, intrinsic diffusion coefficient, swelling exponent, etc., have been evaluated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2782–2789, 2001     

Preparation of polyelectrolyte complex membranes based on sodium cellulose sulfate and poly(dimethyldiallylammonium chloride) and its permeability properties

In this study, polyelectrolyte complex (PELC) membranes prepared by the simultaneous interfacial reaction between aqueous solutions of sodium cellulose sulfate (NaCS) as polyanion and poly(dimethyldiallylammonium chloride) (PDMDAAC) as polycation were proposed. The preparation conditions were optimized. The influence of two important factors, molecular weight (MW) of PDMDAAC and reaction time on the membrane formation procedure and permeability was investigated. Membranes with the preparation conditions as NaCS 3.5% (w/v), PDMDAAC (MW = 200–350 kDa) 7.0% (w/v), the reaction time 30 min, hold a favorable performance, and steady state in water flux experiment. To testify the feasibility of the membrane used in salt separation, membrane performances and selectivity of the inorganic salts as well as their relations to the preparation conditions, the operation parameters, the species of inorganic salts, etc., were investigated in the pressure‐driven experiments. The results showed that this single‐layer PELC membrane afforded higher rejections of divalent ions (SO) to that of monovalent ions (Cl⁻), which indicated the potential application of this membrane system in the salt rejection process. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A study of blending and complexation of poly(acrylic acid)/poly(vinyl pyrrolidone)

Poly(acrylic acid) (PAA) and poly(vinyl pyrrolidone) (PVP) were chosen to prepare polymer complex and blends. The complex was prepared from ethanol solution and the blends were prepared from 1-methyl-2-pyrrolidone solution. DSC results show that the T_gs of the PAA/PVP blends lie between those of the two constituent polymers, whereas T_g of the PAA/PVP complex is higher than both blends and the two constituent polymers. TGA results show that degradation temperature, T_d, of PAA increases upon adding PVP in the blend, but thermal stability of the complex is higher than that of the blends as reflected by the higher T_d. Both FTIR and high-resolution solid state NMR show strong hydrogen bonding between PAA and PVP by showing significant chemical shift. The T_1ρ(H) measurement shows that the homogeneity scale for the blend is at ∼20 Å and that for the complex is ∼15 Å.     

A study on solution properties of poly(N,N‐diethylacrylamide‐co‐acrylic acid)

Poly(N,N‐diethylacrylamide) (PDEA), poly(acrylic acid) (PAA), and a series of (N,N‐diethylacrylamide‐co‐acrylic acid) (DEA‐AA) random copolymers were synthesized by the method of radical polymerization. The measurement of turbidity showed that the phase behaviors of the brine solutions of the copolymers changed dramatically with the mole fraction of DEA (x) in these copolymers. Copolymers cop6 (x = 0.06) and cop11 (x = 0.11) in which acrylic acid content was higher presented the upper critical solution temperature (UCST) phase behaviors similar to PAA. Copolymer cop27 (x = 0.27) presented the lower critical solution temperature (LCST) behavior similar to PDEA. While copolymer cop18 (x = 0.18) in which acrylic acid content was moderate presented both UCST and LCST behaviors. The solution properties of the polymers were investigated by measurements of viscosity, fluorescence, and pH. It is reasonable to suggest that the sharp change of the phase behavior may be attributed to the interaction between acrylamide group and carboxylic group in the (DEA‐AA) copolymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(acrylic acid)–poly(vinyl alcohol) copolymers with superabsorbent properties

Biodegradable polyacrylates were produced by a series of novel copolymerization and/or crosslinking techniques using poly(vinyl alcohol) (PVA) moieties modified by the incorporation of olefinic structures. PVA was modified by a tosylation and/or detosylation reaction. The functionalized PVA was copolymerized and/or crosslinked with acrylic acid or its partially neutralized form to give crosslinked polyacrylates that could swell in water. Their swelling behavior was determined under load. Degradation studies were performed in α-chymotrypsin, trypsin, and papain solutions. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 817–829, 1998     

Calcium ion‐induced self‐healing pattern of chemically crosslinked poly(acrylic acid) hydrogels

Poly(acrylic acid) hydrogels crosslinked with N,N′‐methylenebisacrylamide were synthesized by free radical polymerization. Polymerization conditions had a significant influence over the gel content and swelling behaviour of the hydrogels. The incorporation of calcium ions led to the origin of a self‐healing feature. The self‐healing behaviour and mechanical performance of the hydrogels were systematically investigated. The hydrogels showed good tensile strength of 1 MPa and excellent stretchable behaviour where hydrogels regained instantaneously. Hydrogel pieces joined together to become an integrated matrix as soon as two cut pieces were brought in contact. The hydrogels possessed a marked healing efficiency of 97% within 6 h at room temperature without any external intervention. The results are explained in terms of the dynamic mobility of calcium ions within the dual‐crosslinked networks of the poly(acrylic acid) hydrogels. © 2017 Society of Chemical Industry     

Intermolecular crosslinking of poly(acrylic acid) in aqueous solution by electron beam irradiation

Poly(acrylic acid) (PAA) was dissolved in water, and the solution was irradiated with high‐energy electrons. The formation of macroscopic gel was studied as a function of the radiation dose, the pH of the aqueous solution, and the concentration of added salt. Gelation by intermolecular crosslinking was found at low pH values of 2–4, whereas at pH greater or equal to 5, no gel was formed by electron beam irradiation. Nevertheless, by adding monovalent salt the gel formation was enhanced at intermediate pH values. The intermolecular crosslinking was assumed to be inhibited by electrostatic repulsive forces when the macromolecules of PAA are negatively charged and the ionic strength of the solution is low. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Enhanced oxygen‐barrier and water‐resistance properties of poly(vinyl alcohol) blended with poly(acrylic acid) for packaging applications

To enhance the oxygen‐barrier and water‐resistance properties of poly(vinyl alcohol) (PVA) and expand its food packaging applicability, five crosslinked poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) blend films were prepared via esterification reactions between hydroxyl groups in PVA and carboxylic acid groups in PAA. The physical characteristics of the blends, including the thermal, barrier, mechanical and optical properties, were investigated as a function of PAA ratio. With increasing PAA content, the crosslinking density was significantly increased, resulting in changes in the chemical structure, morphology and crystallinity of the films. The oxygen transmission rate of pure PVA decreased from 5.91 to 1.59 cc m^?1 day^?1 with increasing PAA ratio. The water resistance, too, increased remarkably. All the blend films showed good optical transparency. The physical properties of the blend films were strongly correlated with the chemical structure and morphology changes, which varied with the PAA content. © 2016 Society of Chemical Industry     

Interpolymer associations between poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) in aqueous dilute solution

This article studied the compatibility of poly(vinyl alcohol) (PVA) with poly(diallyldimethylammonium chloride) (PDADMACl) in a dilute aqueous solution. At a total mixture concentration and a constant molecular weight of PDADMACl, it was found that interpolymer associations increase with the molecular weight and decrease with the degree of hydrolysis of the PVA sample (87–89 and 98–99%). From these results, it can be deduced that the compatibility of PVA and PDADMACl is due to specific intermolecular interactions that could be assigned mainly to electrostatic interactions between hydroxyl groups within PVA chains and ion atoms within PDADMACl. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 433–435, 2002     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006     

Synthesis and characterization of chitosan/poly(acrylic acid) polyelectrolyte complex

Polyelectrolyte complex based on chitosan and acrylic acid monomer by photoinitiated free‐radical polymerization in the absence of crosslinker showed a large transition in swelling in response to changes in pH of surrounding medium. Their ability to swell arises from polyelectrolyte interactions and molecular structure of the complex. The main properties of interest that related to the molecular structure, swelling volumes, glass transition temperature, and elastic modulus of the complex were investigated. The effect of water content, the only variable in the sample component, played an important role in molecular structure of the complex and as a consequence, the extent of intermolecular linkage, especially amide bonds which in turn governed the degree of swelling of the polyelectrolyte complex in this study. The decreased degree of swelling and higher temperature shift of glass transition temperature was found with increased water content, whereas increased modulus of elasticity of dry complex was found in lower water content of synthesis component. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1025–1035, 2002     

Interpolyelectrolyte complex of poly(2‐vinylpyridinium chloride) and poly(sodium phosphate)

A polyelectrolyte complex (PEC) was formed by mixing aqueous solutions of the polyanion poly(sodium phosphate) with the polycation poly(2‐vinylpyridinium chloride). Conductometric and potentiometric titrations indicated the electrochemical end point of each titration. In all cases the end point occurred at a unit molar ratio of polyanionic to polycationic groups that was approximately one. The stoichiometry was also confirmed by analysis of the supernatant liquid in conjunction with the weights of the initial components and complex. An analysis showed that the starting materials were regenerated after dissolution of the complex with a 2M HCl solution. The interaction of the bivalent cupric ions with PEC were also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3022–3028, 2002; DOI 10.1002/app.2332