SBR/P(St-MMA-AN)互穿网络聚合物的加工和力学性能

以丁苯胶乳为种子乳液，苯乙烯、甲基丙烯酸甲酯、丙烯腈的混合物为硬单体，二乙烯基苯为交联剂，在氧化还原引发体系下，以种子乳液聚合法得复合乳液，絮凝干燥后得到共聚物。研究了硬单体用量、硬单体配比、加工次数对聚合物力学性能的影响规律。结果表明，聚合物可反复进行热塑性加工，聚合物微观相畴随加工次数增多而变小。     

Novel materials based on silicone–acrylate copolymer networks

This article presents a broad class of materials made by copolymerization of a family of telechelic free radically polymerizable siloxanes with various acrylate monomers that polymerize to form high T_g polymers. Films with properties ranging from strong elastomers to plastics have been obtained by UV‐initiated bulk copolymerization of functional siloxanes dissolved in acrylate monomers (in the presence of a photoinitiator). The molecular weight of the functional siloxanes, the nature of functional endgroups, the choice of (meth)acrylate comonomer, and the siloxane/acrylate ratio all have a rather dramatic effect on the morphology, and thus, on the properties of the copolymeric networks. Physical properties of the materials, such as optical appearance and mechanical and transport properties are correlated with the unique morphologies observed by TEM studies. Unusual properties such as reversible whitening of some of the materials and low Poisson ratios have been attributed to the microcavitation observed when high T_g acrylate domains interfere with the network deformation. Networks composed of high T_g acrylates (major fraction) coreacted with elastomeric siloxanes can provide heat‐shrinkable materials when they are elongated at temperatures higher than the T_g of the corresponding polyacrylates and quenched. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 159–180, 2001     

Synthesis and swelling behavior of thermosensitive IPN hydrogels based on sodium acrylate and N‐isopropyl acrylamide by a two‐step method

A series of interpenetrating polymer network (IPN) hydrogels having higher swelling ratio (SR) and thermosensitivity were synthesized from sodium acrylate (SA) and N‐isopropyl acrylamide (NIPAAm) by a two‐step method. A series of the porous poly(sodium acrylate ‐co‐1‐vinyl–2‐pyrrolidone) [poly(SA‐co‐VP)], (SV), hydrogels were prepared from acrylic acid having 90% degree of neutralization and VP monomer in the first step. The second step is to immerse the SV dried gels into the NIPAAm solution containing initiator, accelerator, and crosslinker to absorb NIPAAm solution and then polymerized to form the poly(SA‐co‐VP)/poly(NIPAAm) IPN hydrogels (SVN). The effect of the different molar ratios of SA/VP and the content of NIPAAm on the swelling behavior and physical properties of the SVN hydrogels was investigated. Results showed that the SVN hydrogels displayed an obviously thermoreversible behavior when the temperature turns across the critical gel transition temperature (CGTT) of poly(NIPAAm) hydrogel. The pore diameter distributions inside the hydrogel also indicated that the pore sizes inside the SVN hydrogels were smaller than those inside the SV hydrogels. At the same time, the more proportion of SA was added into the hydrogel, the larger pore diameter of the SV hydrogel was formed. The results also showed that the SR decreased with an increase of the VP content in the SV hydrogel and more obviously decreased in the SVN hydrogels. The SVN networks also showed stronger shear moduli than SV hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Silicone‐based hydrogels prepared by interpenetrating polymer network synthesis: Swelling properties and confinements effects on the formation kinetics

In this work, interpenetrating polymer networks (IPNs) of polydimethylsiloxane (PDMS) and poly(acrylic acid) or poly(2‐hydroxyethyl methacrylate) (PHEMA) have been synthesized employing a sequential method. Monomeric AAc or HEMA was introduced into the PDMS network by swelling the polymer in solutions of monomer. The polymerization of monomers was then conducted in the swollen network. The swelling properties of the IPNs were investigated by varying the monomer concentrations in the polymerization and more swelling was observed with low monomer concentrations due to the prevalence of cyclization reactions. Multi‐step polymerization used to achieve IPNs with high hydrogel contents, did not improve their water uptake. The kinetics of acrylic acid polymerization was studied under various conditions. Specifically, in the presence of confinement effects imposed by the PDMS network a considerable drop in the rate of reaction was observed. The cross‐linking density of the PDMS network was also studied how to affect the reaction rate. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of melt‐blended graphene nanosheets–poly(vinylidene fluoride) nanocomposites with enhanced properties

Nanocomposites of poly(vinylidene fluoride) (PVDF) with chemically reduced graphene nanosheets (GNs) were prepared by melt mixing method and their structure and morphology characterized by SEM analysis. The addition of GNs in the PVDF matrix resulted in changes of the crystallization and melting behaviors. Furthermore, increasing GNs content led to improved thermal stability of the PVDF nanocomposites in air and nitrogen, as well as significant increase in tensile and flexural properties. The nanocomposites' rheological behavior is also affected by the GNs' content. Using oscillatory rheology to monitor the GNs' dispersion, it was found that as the GNs loading increase, the Newtonian behavior disappears at low frequency. This suggests a viscoelastic behavior transition from liquid‐like to solid‐like, with greater GNs content and more homogeneous dispersion resulting in a stronger solid‐like and nonterminal behavior. By using the melt mixing method to disperse GNs, the properties of PVDF are enhanced due to the better dispersion and distribution of GNs throughout the matrix. This improvement could broaden the applications for PVDF nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and antidehydration of interpenetrating polymer network hydrogels based on 2‐hydroxyethyl methacrylate and N‐vinyl‐2‐pyrrolidone

This work reports the preparation of 2‐hydroxyethyl methacrylate (HEMA)/N‐vinyl‐2‐pyrrolidone (NVP) interpenetrating polymer network (IPN) hydrogels by UV‐initiated polymerization in the presence of free radical photoinitiator Darocur 1173 and cationic photoinitiator 4,4′‐dimethyl diphenyl iodonium hexafluorophosphate. The polymerization mechanism was investigated by the formation of gel network. The structure and morphology of the HEMA/NVP IPN hydrogels were characterized by fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). The results showed that the IPN gels exhibited homogeneous morphology. The dehydration rates of HEMA/NVP IPN hydrogels were examined by the gravimetric method. The results revealed that the hydrogels had a significant improvement of antidehydration ability in comparison with poly(2‐hydroxyethyl methacrylate)(PHEMA) hydrogel embedded physically with poly(N‐vinyl‐2‐pyrrolidone)(PVP). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal and dielectric properties of bismaleimide‐triazine resins containing octa(maleimidophenyl)silsesquioxane

Octa(maleimidophenyl)silsesquioxane (OMPS) was synthesized, characterized, and employed to modify the BT resin which composed of 4,4′‐bismaleimidodiphenylmethane (BMI) and 2,2′‐bis(4‐cyanatophenyl)propane (BCE). The curing reaction between OMPS and BT resin was first investigated. It was found that OMPS accelerate the curing reaction of BCE, and the onset temperature of the cyclotrimerization was reduced up to 95.5°C (by DSC). As demonstrated by DSC and FTIR, there was no evidence that indicated the coreaction between maleimide and cyanate ester. 2,2′‐diallyl bisphenol A (DBA) and diglycidyl ether of bisphenol A (E‐51) (Wuxi Resin Factory, Jiangsu Province, China) were also used to enhance the toughness of BT resin, and the formulated BTA (containing DBA) and BTE (containing E‐51) resins were obtained. The thermal properties of BT, BTA, and BTE resins incorporated with OMPS were then investigated. The results of DMA and TG showed that the BT, BTA, and BTE resins containing 1 wt % of OMPS exhibit enhanced thermal properties in comparison with their pristine resins respectively, while more contents of OMPS may impair the thermal properties of the polymer matrix, though the effect of OMPS was slight. Finally, the dielectric constant of these hybrid materials were detected, and their dielectric constant were distinctly reduced by the incorporation of OMPS, while overmuch contents of OMPS were disadvantageous for dielectric constant because of the aggregation of OMPS. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Mechanical properties and ionic conductivity of gel polymer electrolyte based on poly(vinylidene‐fluoride‐co‐hexafluoropropylene)

The main thermodynamic parameters were evaluated for the dextran/methoxy ethylene glycol (MEG) system by viscosity measurements at 25, 30, 35, 40, and 45°C. The long-range and short-range interaction parameters were determined by extrapolation methods, i.e, Kurata-Stockmayer-Fixman, Berry, and Inagaki-Suzuki-Kurata equations. Calculated values, as well as the unperturbed root-mean-square end-to-end distance and hydrodynamic expansion factor, were interpreted mainly on the basis of hydrogen-bond formation between polymer segments and dextran/MEG molecules in solution. The thermodynamic interaction parameter was also evaluated for the same system. The theta temperatures were obtained from the temperature dependence of the interaction parameter, dependence of (1/2-χ) and the second virial coefficient in the temperature interval of 25 and 45°C for the system and quite a good accordance was indicated with the calculated values evaluated via extrapolation and interpolation methods. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 948–953, 2001     

Interpenetrating polymer networks composed of castor oil‐based polyurethane and 2‐hydroxy‐4‐methacryloyloxy acetophenone

2‐Hydroxy‐4‐methacryloyloxy acetophenone, a vinyl monomer, was prepared by reacting 2,4‐dihydroxy acetophenone with methacryloyl chloride in presence of triethylamine in methyl ethyl ketone. The vinyl monomer was characterized by Fourier transform infrared spectra and Proton magnetic resonance spectra to confirm the various functional groups in the monomer. The liquid prepolyurethanes obtained from castor oil, toluene‐2,4‐diisocyanate, and hexamethylene diisocyanate, varying the NCO/OH ratio, were interpenetrated with the above vinyl monomer containing ethylene glycol dimethacrylate, using radical polymerization initiated by benzoyl peroxide. The interpenetrating polymer networks were obtained as transparent tough films by transfer moulding. They were characterized for thermal behavior with evaluation of kinetic parameters. From the kinetic data, it is clear that the degradation process of the interpenetrating networks is slower in the temperature range of 270–390°C and faster in the range of 390–510°C. Thermal stability also varies with the change in diisocyanates. The morphology was examined by scanning electron microscopy (SEM). The resulting two‐phase morphology was found to be sensitive to change in monomer concentration. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1487–1492, 2000     

Thermo‐ and pH‐responsive behaviors of graft copolymer and blend based on chitosan and N‐isopropylacrylamide

Thermo‐ and pH‐sensitive polymers were prepared by graft polymerization or blending of chitosan and poly(N‐isopropylacrylamide) (PNIPAAm). The graft copolymer and blend were characterized by Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction measurements, and solubility test. The maximum grafting (%) of chitosan‐g‐(N‐isopropylacrylamide) (NIPAAm) was obtained at the 0.5 M NIPAAm monomer concentration, 2 × 10⁻³ M of ceric ammonium nitrate initiator and 2 h of reaction time at 25°C. The percentage of grafting (%) and the efficiency of grafting (%) gradually increased with the concentration of NIPAAm up to 0.5 M, and then decreased at above 0.5 M NIPAAm concentration due to the increase in the homopolymerization of NIPAAm. Both crosslinked chitosan‐g‐NIPAAm and chitosan/PNIPAAm blend reached an equilibrium state within 30 min. The equilibrium water content of all IPN samples dropped sharply at pH > 6 and temperature > 30°C. In the buffer solutions of various pH and temperature, the chitosan/PNIPAAm blend IPN has a somewhat higher swelling than that of the chitosan‐g‐NIPAAm IPN. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1381–1391, 2000     

Tensile properties,barrier properties,and biodegradation in soil of compression—Molded gelatin‐dialdehyde starch films

Glycerol (Gly)‐plasticized gelatin (Ge) films crosslinked with dialdehyde starch (DAS) as environmentally friendly crosslinking agent were successfully produced by compression molding, demonstrating the capacity of gelatin of being transformed into films by using thermoplastic processes. The effect of DAS content on the color, light transmission, total soluble matter (TSM), water uptake (WU), water vapor permeability (WVP), oxygen permeability (OP) as well as biodegradability during soil burial was investigated. The addition of up to 10 wt % DAS (Ge‐10DAS) generated transparent films, with reduced TMS, WU, WVP, and OP values but higher extensivity than the uncrosslinked counterpart. Further incorporating DAS into plasticized‐gelatin matrix conducted to phase separation with detrimental effect of transparency and tensile properties. DAS‐containing films degraded at slow rate than the uncrosslinked counterpart, suggesting that biotic attack during soil burial is restricted by covalent crosslinking points induced by DAS. Ge‐10DAS films lost about 28% of their initial mass within the first 8 days of exposure to degrading medium; therefore, the material can be classified as rapidly degradable. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks based on polyurethane and poly(hydroxyethyl methacrylate)

The thermodynamic miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks (semi‐IPNs) of crosslinked polyurethane (PU) and linear poly(hydroxyethyl methacrylate) (PHEMA) have been investigated. The free energies of mixing of the semi‐IPN components have been determined by the vapour sorption method and it was established that the parameters are positive and depend on the amount of PHEMA in the semi‐IPN samples. Thermal analyses glass transition temperatures evidenced two in the semi‐IPNs in accordance with the investigation of the thermodynamic miscibility of these systems. Dynamic mechanical analysis revealed a pronounced change in the viscoelastic properties of the PU‐based semi‐IPNs with different amounts of PHEMA in the samples. The semi‐IPNs have two distinct tan δ maxima related to the relaxations of the two polymers in their glass temperature domains. The temperature position of PU relaxation maximum tan δ is invariable but its amplitude decreases in the semi‐IPNs with increasing amount of PHEMA in the systems. The tan δ maximum of PHEMA is shifted to a lower temperature and its amplitude decreases with increasing amount of PU in the semi‐IPNs. The segregation degree of components α was calculated using the viscoelastic properties of semi‐IPNs. It was concluded that the studied semi‐IPNs are two‐phase systems with incomplete phase separation. The different levels of immiscibility lead to the different degree of phase separation in the semi‐IPNs with compositions. Copyright © 2004 Society of Chemical Industry     

The relationship between mechanical properties and morphology of vibration‐injection‐molded polyethylene

This paper introduces a novel melt vibration‐injection molding. The effect of mid‐frequency melt vibration on mechanical properties was introduced, and SEM, WAXD and DSC investigations had been employed to provide evidence for explaining the relationship between mechanical properties and morphology of vibration‐injection‐molded specimens. The results show that the effect of vibration frequency is very different from that of vibration pressure amplitude. At a given vibration pressure amplitude, the increase of vibration frequency is beneficial for obtaining preferential orientation, more perfect lamellae and enhanced mechanical properties. For a given vibration frequency, increase of vibration pressure amplitude is a pre‐requisite for the achievement of a large‐scale lamella, more pronounced orientation, increase of cyrstallinity and high strength of high‐density polyethylene, but part of the toughness is lost. Copyright © 2004 Society of Chemical Industry     

Physicomechanical and thermal properties of moldings made from liquefied wood‐based novolak PF resins under various hot‐pressing conditions

The wood powder of Cryptomeria japonica (Japanese cedar) was liquefied in phenol, with H₂SO₄ and HCl as a catalyst. The liquefied wood was used to prepare the liquefied wood‐based novolak phenol formaldehyde (PF) resins by reacting with formalin. Furthermore, novolak PF resins were mixed with wood flour, hexamethylenetetramine, zinc stearate as filler, curing agent, and lubricating agent, respectively, and hot‐pressed under 180 or 200°C for 5 or 10 min to manufacture moldings. The results showed that physicomechanical properties of moldings were influenced by the hot‐pressing condition. The molding made with hot‐pressing temperature of 200°C for 10 min had a higher curing degree, dimensional stability, and internal bonding strength. The thermal analysis indicated that using a hot‐pressing temperature of 180°C was not sufficient for the liquefied wood‐based novolak PF resins to completely cure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and swelling properties of semi‐IPN hydrogels based on chitosan‐g‐poly(acrylic acid) and phosphorylated polyvinyl alcohol

The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g^?1 in distilled water and 55 g·g^?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g^?1 in distilled water and 47 g·g^?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Mechanical properties and structure of high‐density polyethylene samples prepared by injection molding with low‐frequency vibration

To better understand the formation of different crystal structures and improve the mechanical properties of high‐density polyethylene samples, melt vibration technology, which generally includes shear vibration and hydrostatic pressure vibration, was used to prepare injection samples. Through melt vibration, the crystal structure changed from typical spherulites of the traditional injection sample to obviously orientated lamellae of vibration samples. Sizes and orientation degrees of lamellae were different according to different vibration conditions. Crystallinity degrees of vibration samples increased notably. Therefore, the tensile strength of vibration samples increased with increasing vibration frequency and vibration pressure, whereas elongation of vibration samples decreased during the first stage and then continued to increase as the vibration frequency increased. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 818–823, 2005     

Thermal and mechanical properties of acrylated expoxidized‐soybean oil‐based thermosets

A series of epoxidized‐soybean oil (ESO) with different epoxyl content were synthesized by in situ epoxidation of soybean oil (SBO). The acrylated epoxidized‐soybean oil (AESO) was obtained by the reaction of ring opening of ESO using acrylic acid as ring opener. The acrylated expoxidized‐soybean oil‐based thermosets have been synthesized by bulk radical polymerization of these AESOs and styrene. The thermal properties of the resins were characterized by differential scanning calorimetry (DSC) and thermo‐gravimetric analysis (TG). The results showed that these resins possess high thermal stability. There were two glass transition temperature of each resin due to the triglycerides structure of the resins. The tensile strength and impact strength of the resins were also recorded, and the tensile strength and impact strength increased as the iodine value of ESO decreased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Improved mechanical properties and structure of PP/nano‐CaCO3 blends prepared by low‐frequency vibration injection molding

BACKGROUD: Melt vibration technology was used to prepare injection samples of polypropylene (PP)/nano‐CaCO₃ blends. It is well known that nano‐CaCO₃ particles are easy to agglomerate owing to their large surface energy. Improving the distribution of nano‐CaCO₃ particles in PP/nano‐CaCO₃ blends is very important for enhancing the mechanical properties. In this work, low‐frequency vibration was imposed on the process of injection molding of PP/nano‐CaCO₃ blends. The aim of importing a vibration field was to change the crystal structure of PP as we studied previously and improve the distribution of nano‐CaCO₃ particles. Furthermore, the mechanical properties were improved. RESULTS: Through melt vibration, the mechanical properties of PP/nano‐CaCO₃ samples were improved significantly. Compared with conventional injection molding, the enhancement of the tensile strength and impact strength of the samples molded by vibration injection molding was 17.68 and 175.96%, respectively. According to scanning electron microscopy, wide‐angle X‐ray diffraction and differential scanning calorimetry measurements, it was found that a much better dispersion of nano‐CaCO₃ in samples was achieved by vibration injection molding. Moreover, the crystal structure of PP in PP/CaCO₃ vibration samples changed. The γ crystal form was achieved at the shear layer of vibration samples. Moreover, the degree of crystallinity of PP in vibration samples increased 6% compared with conventional samples. CONCLUSION: Concerning the microstructure, melt vibration could effectively change the crystal structure and increase the degree of crystallinity of PP besides improving the distribution of nano‐CaCO₃ particles. Concerning the macrostructure, melt vibration could enhance the mechanical properties. The improvement of mechanical properties of PP/nano‐CaCO₃ blends prepared by low‐frequency vibration injection molding should be attributed to the even distribution of nano‐CaCO₃ particles and the formation of γ‐PP and the increase of the degree of cystallinity. Copyright © 2007 Society of Chemical Industry     

Preparation,mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

The waterborne polyurethane (PU) prepolymer was first prepared based on isophorone diisocyanate, polyether polyol (NJ‐210), dimethylol propionic acid (DMPA), and hydroxyethyl methyl acrylate via in situ method. The crosslinked waterborne polyurethane‐acrylate (PUA) dispersions were prepared with the different functional crosslinkers. The chemical structures, optical transparency, and thermal properties of PU and PUA were confirmed by Fourier transform infrared spectrometry, ultraviolet–visible spectrophotometry, and differential scanning calorimetry. Some physical properties of the aqueous dispersions such as viscosity, particle size, and surface tension were measured. Some mechanical performances and solvent resistance of PUA films were systemically investigated. The experimental results showed that the particle sizes of the crosslinked PUA aqueous dispersions were larger than the PU and increased from 57.3 to 254.4 nm. When the ratios of BA/St, BA/TPGDA, and BA/TMPTA were 70/30, PUA films exhibited excellent comprehensive mechanical properties. The tensile strength and elongation at break of the film were 2.17 MPa and 197.19%. When the ratio of BA/St was 30/70, the film had excellent water resistance and was only 6.47%. The obtained PUA composites have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings, and wood finishes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and swelling properties of pH‐sensitive hydrogels based on chitosan and poly(methacrylic acid) semi‐interpenetrating polymer network

A novel semi‐interpenetrating polymer network (semi‐IPN) hydrogel composed of chitosan and poly(methacrylic acid) was synthesized using formaldehyde as a crosslinker. The amount of crosslinker was searched and optimized. The structure of the hydogel was investigated by Fourier transform infrared (FTIR) spectroscopy. The spectrum shows that a structure of polyelectrolyte complex exists in the hydrogel. The effects of pH, ionic strength, and inorganic salt on the swelling behaviors of the hydrogel were studied. The results indicate the hydrogel has excellent pH sensitivity in the range of pH 1.40 to 4.50, pH reversible response between pH 1.80 and 6.80, and ionic strength reversible response between ionic strength 0.2 and 2.0M. The results also show that the hydrogel has a bit higher swelling capacity in a mix solution of calcium chloride (CaCl₂) and hydrochloric acid (HCl) solution than in a mix solution of sodium chloride (NaCl) and HCl. These results were further confirmed through morphological change measured by scanning electron microscope (SEM). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1720–1726, 2005