Characteristics of gold biosorption from cyanide solution

Gold adsorption from cyanide solution by bacterial (Bacillus subtilis), fungal (Penicillium chrysogenum) and seaweed (Sargassum fluitans) biomass was examined. At pH 2.0, these biomass types were capable of sequestering up to 8.0 µmol g⁻¹, 7.2 µmol g⁻¹ and 3.2 µmol g⁻¹, respectively. An adverse effect of increasing solution ionic strength (NaNO₃) on gold biosorption was observed. Gold‐loaded biomass could be eluted with 0.1 mol dm⁻³ NaOH with efficiencies higher than 90% at pH 5.0 at the Solid‐to‐Liquid ratio, S/L, = 4 (g dm⁻³). Cyanide mass balances for the adsorption, desorption as well as for the AVR process indicated the stability of the gold‐cyanide which did not dissociate either upon acidification or upon binding by biomass functional groups. Gold biosorption mainly involved anionic AuCN₂⁻ species bound by ionizable biomass functional groups carrying a positive charge when protonated. FTIR analyses indicated that the main biomass functional groups involved in gold biosorption are most probably nitrogen‐containing weak base groups. The present results confirmed that waste microbial biomaterials have some potential for removing and concentrating gold from solutions where it occurs as a gold‐cyanide complex. © 1999 Society of Chemical Industry     

Gold‐Catalyzed Synthesis of Dibenzopentalenes – Evidence for Gold Vinylidenes

A series of easily accessible arene‐1,2‐diynes, bearing one aryl substituent on one of the alkynyl groups, is readily converted to dibenzopentalenes in good yields by gold(I) catalysts. The participation of gold acetylides could be proven by the direct conversion to the corresponding gem‐diaurated dibenzopentalenes with a gold catalyst. From an experiment with a gold acetylide complex and stoichiometric amounts of the gold “catalyst” the corresponding gem‐diaurated complex of a dibenzopentalene could be obtained and characterized by X‐ray crystal structure analysis. Labelling studies with deuterated alkynes show the expected deuteration of the two remaining positions of the pentalene core. All this provides evidence for a dual activation mode of the reaction and gold(I) vinylidene complexes as intermediates of the catalytic cycle.     

Gold‐Catalyzed Sequential Amination/Annulation Reactions of 2‐Propynyl‐1,3‐dicarbonyl Compounds

The gold(III)‐catalyzed sequential amination/annulation reaction of 2‐propynyl‐1,3‐dicarbonyl compounds 1 with primary amines 2 produces 1,2,3,5‐substituted pyrroles 4 in moderate to high yields.     

Solvent extraction of gold(I) from alkaline cyanide solution by dibutylcarbitol (DBC) with n‐octanol

BACKGROUND: Currently, cyanidisation is preferred for the extraction of gold because it has a number of advantages over other methods. Gold(I) can be extracted with various extractants, but there are no reports on the extraction of gold(I) from cyanide solution by dibutylcarbitol (DBC). In this work the extraction of gold(I) from alkaline cyanide solution using DBC with n‐octanol was studied. Several factors affecting the percentage extraction of gold(I), including DBC concentration, diluent concentration, equilibrium time, phase ratio, pH and gold concentration in aqueous phase, were investigated. RESULTS: The results showed that 96.2% of gold(I) could be extracted using an organic phase composed of 40% (v/v) DBC, 50% (v/v) n‐octanol and 10% (v/v) odourless kerosene. The extraction was quite fast and equilibrium could be established within 2 min. Stripping of the gold‐laden organic phase was carried out using sodium sulfite (Na₂SO₃) and sodium thiosulfate (Na₂S₂O₃) solutions, with Na₂S₂O₃ proving better than Na₂SO₃. The percentage stripping of gold(I) was 96.5% when the Na₂S₂O₃ concentration was 4% (w/w), and the stripping capacity of gold(I) exceeded 311.3 mg L^?1 when the phase ratio (A/O) was equal to 0.2. CONCLUSION: Gold(I) can be extracted from aqueous cyanide solution by DBC in the presence of n‐octanol and efficiently stripped by aqueous Na₂S₂O₃ solution. This method has the potential for practical application in the extraction and separation of gold. Copyright © 2008 Society of Chemical Industry     

Gold‐Catalyzed Carboalkoxylations of 2‐Ethynylbenzyl Ethers to form 1‐ and 2‐Indanones Chemoselectively: Effects of Ligands and Solvents

The selective syntheses of 1‐ and 2‐indanone compounds from 2‐ethynylbenzyl ethers have been achieved with suitable catalysts and solvents. The highly acidic [tris(pentafluorophenyl)phosphine]gold hexafluoroantimonate [P(C₆F₅)₃AuSbF₆] in nitromethane (MeNO₂) preferably gives 1‐indanones whereas [(ortho‐biphenyl)di(tert‐butyl)phosphine]gold triflimide [P(tBu)₂(o‐biphenyl)AuNTf₂] in dichloroethane tends to form 2‐indanone derivatives. For 2‐indanone products, we isolated two indenyl methyl ethers for deuterium labeling analyses, providing evidence for π‐alkyne activation.

     

(R)‐α‐Lipoyl‐Glycyl‐L‐Prolyl‐L‐Glutamyl Dimethyl Ester Codrug as a Multifunctional Agent with Potential Neuroprotective Activities

The (R)‐α‐lipoyl‐glycyl‐L ‐prolyl‐L ‐glutamyl dimethyl ester codrug (LA‐GPE, 1 ) was synthesized as a new multifunctional drug candidate with antioxidant and neuroprotective properties for the treatment of neurodegenerative diseases. Physicochemical properties, chemical and enzymatic stabilities were evaluated, along with the capacity of LA‐GPE to penetrate the blood–brain barrier (BBB) according to an in vitro parallel artificial membrane permeability assay for the BBB. We also investigated the potential effectiveness of LA‐GPE against the cytotoxicity induced by 6‐hydroxydopamine (6‐OHDA) and H₂O₂ on the human neuroblastoma cell line SH‐SY5Y by using the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) reduction assay. Our results show that codrug 1 is stable at both pH 1.3 and 7.4, exhibits good lipophilicity (log P=1.51) and a pH‐dependent permeability profile. Furthermore, LA‐GPE was demonstrated to be significantly neuroprotective and to act as an antioxidant against H₂O₂‐ and 6‐OHDA‐induced neurotoxicity in SH‐SY5Y cells.     

Ring‐opening copolymerization of maleic anhydride with propylene oxide by double‐metal cyanide

Ring‐opening copolymerization of maleic anhydride (MA) with propylene oxide (PO) was successfully carried out by using double‐metal cyanide (DMC) based on Zn₃[Co(CN)₆]₂. The characteristics of the copolymerization are presented and discussed in this article. The structure of the copolymer was characterized with IR and ¹H‐NMR. Number‐average molecular weight (M_n) and molecular weight distribution (MWD) of the copolymer were measured by GPC. The results showed that DMC was a highly active catalyst for copolymerization of MA and PO, giving high yield at a low catalyst level of 80 mg/kg. The catalytic efficiency reached 10 kg polymer/g catalyst. Almost alternating copolymer was obtained when monomer charge molar ratio reached MA/PO ≥ 1. The copolymerization can be also carried out in many organic solvents; it was more favorable to be carried in polar solvents such as THF and acetone than in low‐polarity solvents such as diethyl ether and cyclohexane. The proper reaction temperature carried in the solvents was between 90 and 100 °C. The M_n was in the range of 2000–3000, and it was linear with the molar ratio of conversion monomer and DMC catalyst. The reactivity ratio of MA and PO in this reaction system was given by the extended Kelen–Tudos equation: η=[r₁+(r₂/α)]ξ?(r₂/α) at some high monomer conversion. The value of reactivity ratio r₁(MA) = 0 for MA cannot be polymerized itself by DMC catalyst, and r₂(PO) = 0.286. The kinetics of the copolymerization was studied. The results indicated that the copolymerization rate is first order with respect to monomer concentration. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1788–1792, 2004     

Gold‐Catalyzed 5‐ and 6‐exo‐dig Selective Cyclizations of Alkynyl Silyl Enol Ethers: Efficient Method for [3+2] and [4+2] Annulations onto α,β‐Enones

An efficient method for the annulation of five‐ and six‐membered rings onto α,β‐enones is described via gold‐catalyzed 5‐ and 6‐exo‐dig selective cyclizations of alkynyl silyl enol ethers.     

Gold‐Catalyzed Synthesis of 3‐Acylimidazo[1,2‐a]pyridines via Carbene Oxidation

A convenient gold‐catalyzed strategy for the synthesis of imidazo[1,2‐a]pyridine derivatives has been developed via gold carbene complexes. This transformation opens a new synthetic route to a variety of 3‐carbonyl‐substituted imidazo[1,2‐a]pyridines using air as oxidant affording the products in good yields.

     

A Simple Procedure for Selective Hydroxylation of L‐Proline and L‐Pipecolic Acid with Recombinantly Expressed Proline Hydroxylases

Due to their diverse regio‐ and stereoselectivities, proline hydroxylases provide a straightforward access to hydroxprolines and other hydroxylated cylic amino acids, valuable chiral building blocks for chemical synthesis, which are often not available at reasonable expense by classical chemical synthesis. As yet, the application of proline hydroxylases is limited to a sophisticated industrial process for the production of two hydroxyproline isomers. This is mainly due to difficulties in their heterologues expression, their limited in vitro stability and complex product purification procedures. Here we describe a facile method for the production of cis‐3‐, cis‐4‐ and trans‐4‐proline hydroxylase, and their application for the regio‐ and stereoselective hydroxylation of L ‐proline and its six‐membered ring homologue l‐ pipecolic acid. Since in vitro catalysis with these enzymes is not very efficient and conversions are restricted to the milligram scale, an in vivo procedure was established, which allowed a quantitative conversion of 6 mM l‐ proline in shake flask cultures. After facile product purification via ion exchange chromatography, hydroxyprolines were isolated in yields of 35–61% (175–305 mg per flask). L ‐Pipecolic acid was converted with the isolated enzymes to prove the selectivities of the reactions. In transformations with optimized iron(II) concentration, conversions of 17–68% to hydroxylated products were achieved. The regio‐ and stereochemistry of the products was determined by NMR techniques. To demonstrate the applicability of the preparative in vivo approach for non‐physiological substrates, L ‐pipecolic acid was converted with an E. coli strain producing trans‐4‐proline hydroxylase to trans‐5‐hydroxy‐L ‐pipecolic acid in 61% yield. Thus, a synthetically valuable group of biocatalysts was made readily accessible for application in the laboratory without a need for special equipment or considerable development effort.     

Ring‐opening copolymerization of L‐lactide with ε‐caprolactone initiated by diphenylzinc

Copolymerization of mixtures of L ‐lactide and ε‐caprolactone has been initiated by diphenylzinc. The reaction conditions were investigated, to discover the effects on yield, molecular weight and microstructure of copolymers obtained. The temperature used varied between 50 and 120 °C, the molar ratio of monomer to initiator ranged between 90 and 1440 mol/mol, and the molar ratio of ε‐caprolactone to L ‐lactide employed was between 100/0 and 0/100 mol/mol. Copolymers were characterized by ¹H‐NMR, ¹³C‐NMR, DSC and gel permeation chromatography. The results indicate that incorporation of L ‐lactide to the growing chain is preferred and ε‐caprolactone is copolymerized after most of the L ‐lactide has been depleted. The microstructure of obtained copolyesters was affected considerably by transesterification reactions. It was observed that increasing reaction temperature, reaction time and concentration initiator was advantageous to the transesterification. The crystallinity of copolyester obtained was determined by differential scanning calorimetry. The results are in good agreement with both molar composition and sequence distribution of copolyesters. Copyright © 2006 Society of Chemical Industry     

One‐Pot Conversion of L‐Threonine into L‐Homoalanine: Biocatalytic Production of an Unnatural Amino Acid from a Natural One

A novel biocatalytic process for production of L ‐homoalanine from L ‐threonine has been developed using coupled enzyme reactions consisting of a threonine deaminase (TD) and an ω‐transaminase (ω‐TA). TD catalyzes the dehydration/deamination of L ‐threonine, leading to the generation of 2‐oxobutyrate which is asymmetrically converted to L ‐homoalanine via transamination with benzylamine executed by ω‐TA. To make up the coupled reaction system, we cloned and overexpressed a TD from Escherichia coli and an (S)‐specific ω‐TA from Paracoccus denitrificans. In the coupled reactions, L ‐threonine serves as a precursor of 2‐oxobutyrate for the ω‐TA reaction, eliminating the need for employing the expensive oxo acid as a starting reactant. In contrast to α‐transaminase reactions in which use of amino acids as an exclusive amino donor limits complete conversion, amines are exploited in the ω‐TA reaction and thus maximum conversion could reach 100%. The ω‐TA‐only reaction with 10 mM 2‐oxobutyrate and 20 mM benzylamine resulted in 94% yield of optically pure L ‐homoalanine (ee>99%). However, the ω‐TA‐only reaction did not produce any detectable amount of L ‐homoalanine from 10 mM L ‐threonine and 20 mM benzylamine, whereas the ω‐TA reaction coupled with TD led to 91% conversion of L ‐threonine to L ‐homoalanine.     

Effect of surfactants on α‐amylase production in a solid substrate fermentation process

Solid substrate fermentation (SSF) is a process where the substrate is a moist solid, which is insoluble in water but not suspended in water. In this study SSF of Bacillus subtilis (ATCC 21556) was used to produce an enzyme of commercial importance, α‐amylase, using as a substrate potato peel. To enhance the production of this enzyme, two nonionic synthetic surfactants were used, Tween 80 and Tween 20, one anionic surfactant, SDS at concentrations of 0.05% and 0.10% (v/w) and a biosurfactant produced by Bacillus subtilis (ATCC 21332), known as surfactin, at concentrations of 0.003%, 0.007%, 0.013% and 0.03% (w/w). The results have shown that surfactants significantly increase the production of α‐amylase. Tween 80 at 0.10% and surfactin at 0.013% provided the highest enzyme activity when compared with the control. © 1999 Society of Chemical Industry     

Chemoenzymatic Synthesis of GDP‐L‐Fucose Derivatives as Potent and Selective α‐1,3‐Fucosyltransferase Inhibitors

Fucosyltransferases (FucTs) usually catalyze the final step of glycosylation and are critical to many biological processes. High levels of specific FucT activities are often associated with various cancers. Here we report the development of a chemoenzymatic method for synthesizing a library of guanosine diphosphate β‐L ‐fucose (GDP‐Fuc) derivatives, followed by in situ screening for inhibitory activity against bacterial and human α‐1,3‐FucTs. Several compounds incorporating appropriate hydrophobic moieties were identified from the initial screening. These were individually synthesized, purified and characterized in detail for their inhibition kinetics. Compound 5 had a K_i of 29 nM for human FucT‐VI, and is 269 and 11 times more selective than for Helicobacter pylori FucT (K_i=7.8 μM) and for human FucT‐V (K_i=0.31 μM).     

Synthesis and characterization of a random terpolymer of L‐lactide, ϵ‐caprolactone and glycolide

A random terpolymer of L ‐lactide (LL), ?‐caprolactone (CL) and glycolide (G) has been synthesized in bulk at 130 °C using stannous octoate as the coordination–insertion initiator. The terpolymer, poly(LL‐ran‐CL‐ran‐G), has been characterized by a combination of analytical techniques: GPC, ¹H NMR, ¹³C NMR, DSC and TG. Molecular weight characterization by GPC shows a unimodal molecular weight distribution with values of M _n = 1.01 × 10⁵ g mol^?1 and M _w / M _n = 2.17. Compositional and microstructural analysis by ¹H NMR and ¹³C NMR, respectively, reveal a terpolymer composition of LL:CL:G = 74:15:11 (mol%) with a chain microstructure consistent with random monomer sequencing. This latter view is supported by the terpolymer temperature transitions (T_g and T_m) from DSC and the thermal decomposition profile from TG. The results and, in particular, the conclusion that it is a random rather than a statistical terpolymer are discussed in the light of current theories regarding the mechanism of this type of polymerization. © 2001 Society of Chemical Industry     

Gold‐Catalyzed Regioselective Meyer–Schuster Rearrangement and Ring Expansion Cascade Leading to α‐Hydroxy‐α‐vinylcyclopentanones

Readily available cyclobutanols having a butyne‐1,4‐diol moiety underwent a sequential regioselective Meyer–Schuster rearrangement and 1,2‐shift, furnishing α‐hydroxy‐α‐vinylcyclopentanones. The reaction mechanism is consistent with the formation of an allenol intermediate that racemizes under the reaction conditions. Subsequent activation of the allenol leads to an enantio‐ and diastereoselective route to this scaffold.

     

Michael Reaction of Nitroalkanes with β‐Nitroacrylates under a Solid Promoter: Advanced Regio‐ and Diastereoselective Synthesis of Nitro‐Functionalized α,β‐Unsaturated Esters and 1,3‐Butadiene‐2‐carboxylates

A new class of nitro‐functionalized α,β‐unsaturated esters has been prepared by a regio‐ and diastereoselective Michael addition of nitroalkanes to β‐nitroacrylates, performed at room temperature, under carbonate on polymer as promoter, and in the presence of ethyl acetate as eco‐friendly solvent. Moreover, by the modular choice of the reaction conditions the method allows the synthesis of 1,3‐butadiene‐2‐carboxylates.