Thermal and morphological properties of thermotropic liquid‐crystalline copolyesters containing poly(ethylene terephthalate), 4‐hydroxyphenylacetic acid and main‐chain rigid aromatic units

Thermotropic liquid‐crystalline polymers (TLCPs) have aroused considerable interest due to their attractive properties as high‐performance materials. Significant research attention has been devoted to investigating the relationship among monomer structures, syntheses and end‐use properties of TLCPs. The study reported here concerns the preparation, characterization and melt spinning of novel copolyesters containing two different flexible units together with two different aromatic units in the polymer chains. A range of copolyesters based on p‐hydroxybenzoic acid (p‐HBA), m‐hydroxybenzoic acid, p‐hydroxyphenylacetic acid and poly(ethylene terephthalate) were synthesized. The liquid crystallinity, thermal properties and degrees of crystallinity of these copolyesters were investigated using hot‐stage polarized light microscopy, differential scanning calorimetry, thermogravimetry and wide‐angle X‐ray diffraction. Copolyester fibres were characterized using scanning electron microscopy. The copolyesters were melt‐processable, thermally stable and could be processed above their melting temperatures without degradation. The degree of crystal structure was found to depend upon the content of p‐HBA. The fibres prepared showed that polymer chains had a well‐developed fibrillar structure. Novel TLCPs containing flexible units in the main chain were synthesized and characterized. Copolyesters containing p‐HBA units ranging from 55 to 70 mol% exhibited phase‐separated liquid‐crystalline morphology, appropriate melting temperatures and high thermal stability for melt processing. Copyright © 2010 Society of Chemical Industry     

Copolyesters of hydroxyphenylalkanoic acids: synthesis and thermal properties of poly{(4‐oxybenzoate)‐co‐[8‐(3‐oxyphenyl)octanoate]} and poly{(3‐bromo‐4‐oxybenzoate)‐co‐[8‐(3‐oxyphenyl)octanoate]}

Copolyesters of 8‐(3‐hydroxyphenyl)octanoic acid (HPOA), a monomer with kink and flexible segment derived from cardanol, and 4‐hydroxybenzoic acid (HBA) or its brominated derivative, 3‐bromo‐4‐hydroxybenzoic acid (BrHBA), were synthesized by acidolysis melt polycondensation of the in situ generated acetoxyderivative in the presence of magnesium acetate as catalyst by a one‐pot method and characterized. The formation of the copolyester was confirmed by elemental analysis, FTIR and ¹H NMR spectroscopy. These polymers were highly insoluble in most solvents except highly polar solvents, such as trifluoroacetic acid. The inherent viscosities of the soluble polymers were in the range of 0.8–1.1 dlg^?1. The thermal and phase behaviour of the copolyesters were studied by DSC and polarized light microscopy. Poly{(4‐oxybenzoate)‐co‐[8‐(3‐oxyphenyl)octanoate]} with 50 mole% of HPOA showed a birefringent melt with opalescence and a worm‐like texture of a nematic phase. The effect of bromine substitution in the analogue poly{(3‐bromo‐4‐oxybenzoate)‐co‐[8‐(3‐oxyphenyl)octanoate]} was evident when it showed a lower transition with minimum 45% Br‐HBA at 225 °C showing enhanced melt processability. These copolymers, with hydrolytically degradable aliphatic carbonyl group and better crystallinity compared to poly(hydroxyalkanoate)s, are interesting in possible biomedical applications. © 2002 Society of Chemical Industry     

Thermal decomposition kinetics of thermotropic copolyesters made from trans‐p‐hydroxycinnamic acid and p‐hydroxybenzoic acid

A series of thermotropic copolyesters were synthesized by direct thermal melt polycondensation of p‐acetoxybenzoic acid (PHB) with trans‐p‐acetoxycinnamic acid (PHC). The dynamic thermogravimetric kinetics of the copolyesters in nitrogen were analyzed by four single heating‐rate techniques and three multiple heating‐rate techniques. The effects of the heating rate, copolyester composition, degradation stage, and the calculating techniques on the thermostability and degradation kinetic parameters of the copolyesters are systematically discussed. The four single heating‐rate techniques used in this work include Friedman, Freeman–Carroll, Chang, and the second Kissinger techniques, whereas the three multiple heating‐rate techniques are the first Kissinger, Kim–Park, and Flynn–Wall techniques. The decomposition temperature of the copolyesters increases monotonically with increasing PHB content from 40 to 60 mol %, whereas their activation energy exhibits a maximal value at the PHB content of 50 mol %. The decomposition temperature, activation energy, the order, and the frequency factor of the degradation reaction for the thermotropic copolyester with PHB/PHC feed ratio of 50/50 mol % were determined to be 374°C, 408 kJ/mol, 7.2, and 1.25 × 10²⁹ min^?1, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 445–454, 2004     

Preparation and characterizations of thermotropic copolyesters of p-hydroxybenzoic acid,sebacic acid,and hydroquinone

A series of copolyesters of p-hydroxybenzoic acid (HBA), sebacic acid and hydroquinone were prepared by melt polycondensation of p-acetoxybenzoic acid, sebacic acid and p-phenylene diacetate. The copolyesters were characterized by IR, NMR, DSC, polarized microscopy, and X-ray diffraction. It was found that the copolyesters exhibited liquid crystallinity when the HBA content was 25–67 mol %. The copolyesters with an HBA content of 25–43 mol % showed a nematic phase and a biphasic range, and the isotropization temperature increased as the HBA content increased. The copolyesters with an HBA content of 54–67 mol % showed a nematic phase up to above 400°C. The liquid crystalline order increased as the HBA content increased due to the increased of the average length of the rigid moieties. © 1995 John Wiley & Sons, Inc.     

Synthesis,characterization, and properties of degradable poly(l‐lactic acid)/poly(butylene terephthalate) copolyesters containing 1,4‐cyclohexanedimethanol

High‐molecular‐weight copolyesters based on poly(butylene terephthalate) as rigid aromatic segments and poly(l‐lactic acid) (PLLA) as degradable aliphatic segments were synthesized via the polycondensation of terephthalic acid, 1,4‐butanediol (BDO), 1,4‐cyclohexanedimethanol (CHDM), and PLLA oligomer. By tailoring the molar ratio of diols (BDO and CHDM), we investigated in detail the effects of the CHDM rigid hexacyclic ring on the synthesis, mechanical properties, thermal stabilities, and degradation behaviors of the copolyesters. With increasing CHDM content, the initial decomposition temperature increased from 282.5 to 322.2°C, and the tensile strength improved by nearly four times, from 5.4 to 19 MPa. When the molar ratio of BDO/CHDM was 95/5, the weight‐average molecular weight of the copolyester was 89,400 g/mol with a polydispersity of 1.96. In addition, hydrolytic degradation results in phosphate buffer solution indicate that the degradation rate of the copolyesters displayed a strong dependency on the temperature and CHDM composition. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(ethylene terephthalate) copolymers that contain 5‐tert‐butylisophthalic acid and 1‐3/1‐4‐cyclohexanedimethanol: Synthesis,characterization, and properties

The effects of incorporating 5‐tert‐butylisophthalic acid (^tBI) and 1‐3/1‐4 cyclohexanedimethanol (CHDM) in the polymer chain of poly(ethylene terephthalate) (PET) on the crystallization behavior and thermal, optical and tensile properties of this polyester (PETGB) were evaluated. These random copolyesters that contained between 0 and 20 mol % of CHDM and between 0 and 10 mol % of ^tBI units were prepared by esterification followed by melt copolycondensation. The compositions and molecular weights of the copolyesters were determined by ¹H‐NMR spectroscopy and viscometry, respectively. The composition of the polyester was consistent with the composition of the feed. The intrinsic viscosities of the copolymers ranged between 0.62 and 0.74 dL/g. The thermal behaviors were investigated over the entire range of copolymer compositions, using DSC under the heating and cooling rate of 20°C/min and TGA. The copolyesters with ^tBI and CHDM of < 20 mol % were crystallizable, whereas the copolyesters with ^tBI and CHDM of ≥ 20 mol % were amorphous. They appeared to be stable up to 395°C. The optical transmissions of the amorphous polyesters were more than 88% in the visible region. The mechanical behavior was investigated by performing a tensile test. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 279–285, 2007     

Synthesis and modification of aromatic polyesters with chloroacetyl 3,5‐dibromo‐p‐hydroxybenzoic acid

Aromatic copolyesters based on diphenylolpropane and 3,5‐dibromo‐p‐hydroxybenzoic acid (p‐HBA) were synthesized by an acceptor‐catalyzed polycondensation method. During the synthesis, equimolar mixtures of chloranhydrides of isophthalic and terephthalic acids were used. The effects of p‐HBA on the tensile and thermal properties of the polyesters were investigated. The breaking stress and modulus of elasticity increased with the amount of p‐HBA up to 10% in molar mass. A further increase in p‐HBA caused deterioration of the tensile properties. The elongation at break decreased at low p‐HBA contents (<5%). The addition of p‐HBA increased the molecular packing and the limiting oxygen index and improved the thermal behavior of the synthesized polyesters. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Semiflexible random thermotropic copolymers from 8‐(3‐hydroxy phenyl) octanoic acid and 3‐chloro‐4‐hydroxy benzoic acid/3,5‐dibromo‐4‐hydroxy benzoic acid

Two series of semiflexible random thermotropic copolymers containing 8‐(3‐hydroxy phenyl) octanoic acid (HPOA) with either 3‐chloro‐4‐hydroxy benzoic acid or 3,5‐dibromo‐4‐hydroxy benzoic acid were prepared by melt polycondensation techniques. The copolyesters were characterized with Fourier transform infrared spectroscopy, dilute solution viscometry, hot‐stage polarized light microscopy, differential scanning calorimetry, thermogravimetric analysis, and wide‐angle X‐ray diffraction. Studies revealed that the amount of HPOA as a disruptor incorporated into the backbone of substituted 4‐hydroxy benzoic acids had a detrimental effect on the liquid‐crystalline behavior. Mesophase‐transition temperatures were observed between 210 and 250°C, and the optical textures were of typical nematic phases. The degree of crystallinity decreased with an increase in the HPOA content. The thermal stability of the copolymers was in the range of 310–370°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and Characterization of Novel Thermotropic Aromatic-Aliphatic Biodegradable Copolyesters Containing D,L-Lactic acid (LA), Poly(butylene terephthalate) (PBT) and Biomesogenic Units

In this study, the copolyesters based on 4-hydroxybenzoic acid (HBA) and vanillic acid (VA), lactic acid (LA) and poly(butylene terephthalate) (PBT) were synthesized via melt polymerization and fully characterized by various measurements. The influences of content of HBA and VA units on thermal behavior, structure and degree of crystallinity of copolyesters were discussed in more detail. It was found that the copolymerization of aliphatic and aromatic units together could make the best use of advantages of the respective polyesters. Moreover, the copolyesters with more than 40 mol% of HBA and VA units could show liquid crystallinity in broad temperature range.     

Main‐chain liquid‐crystalline polymers containing azobenzene mesogen having long lateral aliphatic side chain: effect of copolymerization on thermal and phase behaviors

Homo‐ and copolyesters of derivatives of hydroxyazobenzenecarboxylic acid with various percentage compositions of m‐hydroxy benzoic acid (m‐HBA)/p‐hydroxy benzoic acid (p‐HBA) were synthesized and characterized. The properties of the copolyesters were compared with their corresponding homopolyesters. The solubility of the copolyesters with m‐HBA increased because of the decrease in the rigidity of the polymer chain attributed to the introduction of nonlinear molecules, whereas the solubilities of the copolyesters with p‐HBA changed only slightly compared to their corresponding homopolyesters. Thermal and phase behaviors of the polymers were characterized by TGA, DSC, and polarizing light microscopy (PLM) methods. Above 30% composition of m‐HBA, the thermal stability of the copolyesters with m‐HBA decreased compared to that of the homopolyester P1, whereas the copolyesters of p‐HBA possessed greater thermal stability than that of their homopolyesters at all compositions. The introduction of the long, flexible alkyl side chain laterally to the backbone of the azobenzene moiety drastically reduced the transition temperature of the homopolyester, but without destroying the mesophase. The effect of copolymerization on liquid‐crystalline behavior and transition temperature of the copolymers was discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1976‐1982, 2004     

Aromatic liquid crystalline copolyesters with low Tm and high Tg: Synthesis,characterization, and properties

In this study, a series of aromatic copolyesters P‐BPAx with lower melting temperature and higher glass transition temperature derived from hydroxybenzoic acid (HBA), 6‐hydroxy‐2‐naphthoic acid (HNA), bisphenol A (BPA) and terephthalic acid (TA) were synthesized via melt polymerization. The copolyesters were characterized by FTIR, solid state ¹³C NMR, DSC, TGA, polarized optical microscopy, X‐ray diffraction, and rheometry measurements. With addition of BPA, the resulting copolyester's melting temperature decreased from 260 to 221°C and its glass transition temperature increased from 70 to 135°C, compared with the parent copolyester P‐HBA70 (HBA/HNA copolymer). With exception of copolyester P‐BPA5.0 (225–280°C), the copolyesters could maintain liquid crystalline behavior in a broad temperature range from 230°C to higher than 410°C. The ability to form nematic liquid crystalline phase disappeared when BPA concentration became higher than 15 mol %. X‐ray diffraction analysis showed crystallinity decreased as the BPA content increased. A slightly distorted O" and a substantially distorted O′ orthorhombic phase was observed for P‐BPA2.5. Upon annealing at 220°C, the O" phase disappeared and the O′ phase became stronger gradually. Rheology study data showed the ability to process the copolyesters improved in those compositions containing <2.5 mol % BPA. Continuing to increase concentrations of BPA, they became intractable. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40487.     

Synthesis and characterization of polyesters based on 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane

Aromatic polyesters are of considerable interest because of their excellent mechanical properties, chemical resistance and thermal stability. However, most aromatic polyesters are difficult to process due to their high glass transition temperatures coupled with their insolubility in common organic solvents. The present article describes a series of organosoluble polyesters and copolyesters based on 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane. A series of new aromatic polyesters containing pendant pentadecyl chains was synthesized by interfacial polycondensation of 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane with terephthalic acid chloride (TPC), isophthalic acid chloride (IPC) and a mixture of TPC and IPC. A series of copolyesters was synthesized from 4,4′‐isopropylidenediphenol with TPC by incorporating 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane as a comonomer. Inherent viscosities of the polyesters and copolyesters were in the range 0.72–1.65 dL g^?1 and number‐average molecular weights were in the range 18 170–87 220. The polyesters and copolyesters containing pendant pentadecyl chains dissolved readily in organic solvents such as chloroform, dichloromethane, pyridine and m‐cresol and could be cast into transparent, flexible and apparently tough films. Wide‐angle X‐ray diffraction data revealed the amorphous nature of the polyesters and copolyesters. The formation of loosely developed layered structure was observed due to the packing of pendant pentadecyl chains. The temperature at 10% weight loss, determined using thermogravimetric analysis in nitrogen atmosphere, of the polyesters and copolyesters containing pendant pentadecyl chains was in the range 400–460 °C. The polyesters and copolyesters exhibited glass transition temperatures in the range 63–82 °C and 177–183 °C, respectively. Copyright © 2010 Society of Chemical Industry     

Biodegradable polymers based on renewable resources. III. copolyesters composed of 1,4:3,6‐dianhydro‐D‐glucitol, 1,1‐bis(5‐carboxy‐2‐furyl)ethane and aliphatic dicarboxylic acid units

Various copolyesters were synthesized by bulk polycondensation of the respective combinations of 1,4;3,6‐dianhydro‐D ‐glucitol (1) as the diol component and 1,1‐bis[5‐(methoxycarbonyl)‐2‐furyl]ethane (3b) and seven dimethyl dialkanoates with methylene chain lengths of 4, 5, 6, 7, 8, 10, and 12 (4a–4g) as the dicarboxylic acid components. Most of the copolyesters were amorphous, while a copolyester composed of 1, 3b, and dodecanedioic acid (4g) (3b:4g = 25:75) units as well as homopolyesters derived from 1 and azelaic acid (4d), sebacic acid (4e), and dodecandioic acid (4g), respectively, were partially crystalline. All these homo‐ and copolyesters were soluble in chloroform, dichloromethane, pyridine, trifluoroacetic acid, and m‐cresol. The number‐average molecular weights of these polyesters were estimated to be in the range of 10,000–20,000 by SEC using chloroform as an eluent and standard polystyrene as a reference. The biodegradability of these copolyesters was assessed by enzymatic degradation using four different enzymes in a phosphate buffer solution at 37°C and by soil burial degradation tests in composted soil at 27°C. In general, biodegradability of the copolyesters decreased with increase in the difuran dicarboxylate 3b content. Copolyesters containing sebasic acid 4e units showed higher biodegradability. Soil burial degradation in the soil that was treated with antibiotics, together with electron microscopic observation, indicated that actinomycetes are mainly responsible for the degradation of the copolyesters containing 3b units in the present soil burial test. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3342–3350, 1999     

Effective biosynthesis of poly(3‐hydoxy‐ butyrate‐co‐4‐hydroxybutyrate) with high 4‐hydroxybutyrate fractions by Wautersia eutropha in the presence of α‐amino acids

BACKGROUND: Biopolymers produced by microbes are in demand as their biodegradable and biocompatible properties make them suitable for disposable products and for potential use as biomaterials for medical applications. The effective microbial production of copolyesters of 3‐hydroxybutyrate (3HB) and 4‐hydroxybutyrate(4HB) with high molar fractions of 4HB unit by a wild‐type Wautersia eutropha H16 was investigated in culture media containing 4‐hydroxybutyric acid (4HBA) and different carbon substrates in the presence of various α‐amino acids. RESULTS: The addition of carbon sources such as glucose, fructose and acetic acid to the culture medium containing 4HBA in the presence of α‐amino acids resulted in the production of random poly(3HB‐co‐4HB) with compositions of up to 77 mol% 4HB unit, but the yields of copolyesters with 60–77 mol% 4HB units were less than 15 wt% of dried cell weights. In contrast, when carbon sources such as propionic acid and butyric acid were used as the co‐substrates of 4HBA in the presence of α‐amino acids, poly(3HB‐co‐4HB) copolyesters with compositions of 72–86 mol% 4HB were produced at maximally 47.2 wt% of dried cell weight (11.3 g L^?1) and the molar conversion yield of 4HBA to 4HB fraction in copolyesters was as high as 31.4 mol%. Further, poly(3HB‐co‐4HB) copolyesters with compositions of 93–96 mol% 4HB were isolated at up to 35.2 wt% of dried cell weights by fractionation of the above copolymers with chloroform/n‐hexane. CONCLUSION: The productivity of copolyesters with over 80 mol% 4HB fractions was as high as 0.146 g L^?1 h^?1 (3.51 g L^?1 for 24 h) by flask batch cultivation. Copyright © 2007 Society of Chemical Industry     

Single‐Point Determination of Intrinsic Viscosity of Semirigid Thermotropic Copolyesters in Phenol/1,1,2,2‐Tetrachloroethane

A series of semirigid thermotropic copolyesters with different compositions were prepared from p‐hydroxybenzoic acid (HBA), hydroquinone (HQ), terephthalic acid (TPA) and poly(ethylene terephthalate) (PET) by acidolysis reaction and following polycondensation. Fourteen procedures of calculation of the intrinsic viscosities from a single viscosity measurement for polymer solutions, including three proposed ones, have been applied for the copolyesters in phenol/1,1,2,2‐tetrachloroethane (60/40, v/v) at 30°C. It is found that various forms of the Huggins and Kraemer equations, used singly or in a combined form, yield intrinsic viscosities in good agreement with those extrapolated values obtained in the usual manner from multipoint viscosity measurements over a wide range of concentrations.     

Synthesis and properties of copolyesters of p,p′‐bibenzoic acid,dimer acid,and alkylene glycol

Copolyesters of p,p′‐bibenzoic acid, dimer acid, and an alkylene glycol are prepared by melt polycondensation of of dimethyl p,p′‐bibenzoate, dimer acid, and an alkylene glycol. The copolyesters are characterized by the inherent viscosity, FTIR, proton NMR, DSC, polarized microscopy, and X‐ray diffraction. The polymer composition and sequence distribution of the copolyesters can be seen from the NMR spectra. The copolyesters exhibit a degree of randomness of about 1, indicating that they are random copolymers. The glass‐transition temperature (T_g) and the melting point (T_m) of the copolyesters are found from the DSC heating curves. When the content of the flexible dimer acid unit increases, the T_g of the copolyesters decreases significantly. The copolymerization effect decreases the crystallinity and the T_m of the copolyesters. It can be seen from the DSC, polarized microscopy, and X‐ray diffraction data that some copolyesters derived from 1,6‐hexanediol and 1,5‐pentanediol exhibit a monotropic smectic phase. As the molar content of the dimer acid unit increases, the isotropic–mectic transition temperature and the smectic order decreases significantly. The liquid crystallinity is completely destroyed at certain molar contents of the dimer acid unit. The smectic order of the copolyesters derived from 1,6‐hexanediol is significantly higher than that of the copolyesters derived from 1,5‐pentanediol, and it is described as an odd–even effect. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 750–758, 2003     

Amorphous copolyesters based on 1,3/1,4‐cyclohexanedimethanol: Synthesis,characterization and properties

Two series of amorphous copolyesters, PETGN and PETGS, were synthesized by the copolymerization of 2,6‐naphthalene dicarboxylic acid (NDA) (0–40%), succinic acid (SA) (0–40%), 1,3/1,4‐cyclohexanedimethanol (1,3/1,4‐CHDM) (10–50%), ethylene glycol (EG), and terephthalic acid (TPA). The compositions and molecular weights of the copolyesters were determined by ¹H NMR spectroscopy and viscometry, respectively. The thermal behaviors were studied over the entire range of copolymer compositions, using DSC and TGA. The optical characteristics, heat‐shrinkable effects and tensile properties of these polymers were also determined. Experimental results indicated that the thermal, optical, tensile, and shrinkage properties of PETGN and PETGS were functions of NDA or SA content. DSC and X‐ray analysis demonstrated that both PETGN and PETGS series were amorphous. Incorporating NDA and SA influenced the T_g values of those polymers, from about 37°C for PETG₃₀S₄₀ to 89°C for PETG₃₀N₄₀. Furthermore, the shrinkage of these amorphous copolyesters was more than 40% when the heating temperature was higher than the corresponding T_g. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(ethylene‐co‐trimethylene terephthalate)s

Taking advantage of a melt polycondensation process, a series of copolyesters composed of pure terephthalate acid (PTA), ethylene glycol (EG), and 1,3‐propanediol (1,3‐PDO) were synthesized. The component, molecular weight, molecular weight distribution, and thermal properties of the copolymers were characterized. The results show that the contents of trimethylene terephthalate (TT) units in the resulting copolyesters are higher than PDO compositions in original diol. Oligomer content in the copolyesters varies with the compositions and attains a minimum value when the TT ingredient is 49.52 mol %. The glass transition temperature (T_g) of the copolyesters varies from 78.5°C for PET (polyethylene terephthalate) to 43.5°C for PTT (polytrimethylene terephthalate) and decreases monotonically with the components. The copolyesters are amorphous copolymers when TT content is in the range of 32.4–40.8 mol %, as calculated from the melting enthalpy (ΔH_m) measured via differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1511–1521 2006     

Synthesis and characterization of biodegradable linear–hyperbranched barbell‐like poly(ethylene glycol)‐supported poly(lactic‐ran‐glycolic acid) copolymers through direct polycondensation

A series of biodegradable linear–hyperbranched barbell‐like poly(ethylene glycol) (PEG)‐supported poly(lactic‐ran‐glycolic acid) (PLGA) copolymers were synthesized with PEG, d ,l ‐lactic acid aqueous solution, glycolic acid and gluconic acid (Glu) under bulk conditions. The branching density of the hyperbranched section was varied by controlling the molar ratio of Glu to hydroxyl‐terminal groups of PEG ([Glu]/[OH] = 1, 3.5, 6.0, 8.5). Chemical structures of these copolymers were confirmed using NMR spectroscopy. The molecular weights were determined using ¹H NMR group analysis and gel permeation chromatography, both results being consistent with one another. The results of hydrolytic degradation indicate that these copolymers can degrade completely in no more than three weeks. The thermal properties were evaluated using differential scanning calorimetry and thermogravimetric analysis. The results indicate that the glass transition temperatures and melt temperatures of these copolymers are not above 50 °C. The self‐assembly behavior of the copolymers on hydrophilic surfaces was also investigated. The morphology of self‐assembly films made of the copolymers was observed using atomic force microscopy, and the results indicate that these copolymers exhibit more inhomogeneous and rough structural orientated films on a silicon wafer substrate with increasing branching densities. Due to the favorable biodegradability and biocompatibility of the PLGA and PEG, the results suggest new possibilities for these novel structural amphiphilic linear–hyperbranched barbell‐like copolymers as potential biomaterials. © 2013 Society of Chemical Industry     

Single‐point determination of intrinsic viscosity of wholly aromatic thermotropic copolyesters in 1,1,1,3,3,3‐hexafluoro‐2‐propanol

A series of wholly aromatic thermotropic copolyesters based on 4‐hydroxybenzoic acid, hydroquinone, and 2,6‐naphthalene dicarboxylic acid were synthesized by direct melt polymerization with or without different added transesterification catalysts. Nine procedures for calculation of the intrinsic viscosities from a single viscosity measurement for polymer solutions, including a proposed one, were applied for the thermotropic copolyesters in 1,1,1,3,3,3‐hexafluoro‐2‐propanol at 30°C. Various forms of the Huggins and Kraemer equations, singly or combined, yielded intrinsic viscosities that were in good agreement with extrapolated values obtained in the usual manner from multipoint viscosity measurements over a wide range of concentrations. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3396–3401, 2001