共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
由机械部合肥通用机械研究所完成的机械工业部基金委基金项目“碳纤维编织密封材料浸渍工艺研究”,针对国内碳纤维纺织密封产品浸渍工艺技术落后状况,通过吸收国外先进技术经验,开展真空浸渍成套技术研究,确定工业设备的技术参数、浸渍材料与配方、产品性能试验等技术攻关后,开发出了高性能的碳纤维编织密封产品,使该产品质量达到了一等品水平,较好地解决了机泵阀设备的密封泄漏问题。新研制的碳纤维编织密封材料由于碳化率达到90%以上,因而各项综合性能优异,使用温度可达350”C,使用介质压力15MPaLi下,使用寿命达1年以上。所… 相似文献
3.
密封材料在汽车等交通工具中的应用主要是气缸垫和润滑系统。目前国内应用较多的是以石棉为骨架与不同弹性体粘结压制而成。随着汽车制造业在我国国民经济中地位的确立并不断向国际先进水平接轨,对其中静密封材料的性能提出了更高的要求。由于世界各国政府对环境保护要求越来越高而引起工业国家对石棉制品生产、使用、销售的严格限制并竞相研究,开发无石棉密封材料并正在发展成为一类新材料产业。 相似文献
4.
5.
雷广山 《机械工程与自动化》2006,(4):165-166,168
密封材料的性能直接影响着密封水平,从密封材料的允许温度范围、减摩性和耐磨性、稳定性、工艺性和经济性几方面阐明了密封材料的性能是保证密封性和使用寿命的关键所在。 相似文献
6.
7.
8.
9.
在密封件的生产制造过程中,弹性密封材料所表现出来的理化性能及加工过程中的工艺性能,将直接体现在密封件的内在质量和外观质量上,影响密封的效果和使用寿命。 相似文献
10.
EPDM/OMMT插层复合型橡胶密封材料因其优良的耐老化性、密封性而被用作特殊部件用包装容器的密封材料。在研究EPDM/OMMT插层复合密封材料低温冲击性能的基础上,利用含O型橡胶密封圈的密封装置,采用密封箱内压力监测法对插层复合型三元乙丙橡胶密封圈的低温密封性能进行试验研究。结果表明,低温冲击次数对三元乙丙橡胶密封材料的硬度和弹性无明显影响,EPDM/OMMT插层复合密封材料耐低温冲击老化性能优良;插层复合型三元乙丙橡胶密封圈在不超过-60℃低温下的密封性能优良。 相似文献
11.
常用的材料选择方法往往忽略了材料的环境属性,从而造成许多的环境问题。基于绿色设计理念,为了在设计阶段将材料对环境的影响降到最低,采用模糊综合评判法从机械性能、工艺性能、经济性和环境属性四个角度对NPT3型内平动齿轮减速器的内齿轮输出轴进行了材料选择,得出最佳材料是QT600-3。结果表明,模糊综合评判法用于选择同时满足轴类和齿轮类零件要求的材料是可行的。 相似文献
12.
J. Arghavani M. Derenne L. Marchand 《The International Journal of Advanced Manufacturing Technology》2001,17(1):2-10
The paper describes a fuzzy decision support system (FDSS) and its application to the selection of sets of optimal parameters
to characterise the gasket sealing performance in gasketed bolted flanged joints. The FDSS of fuzzy logic theory is applied
considering the gas pressure, gasket deflection, and leakage rate based on required gasket stress and flange surface roughness.
The idea and implementation of the fuzzy decision support system is based on the compositional rules of inference and can
be applied to other areas of gasketed bolted flanged joints to automate the selection of proper parameters which can best
characterise the joint sealing performance and provide the required tightness. 相似文献
13.
以某潜水器大型舱段连接处使用的三角密封结构为研究对象,建立O形圈与三角形沟槽接触的非线性有限元分析模型,仿真分析三角密封结构的橡胶材料硬度、O形圈内径、沟槽倒角尺寸、沟槽圆角尺寸对密封性能的影响规律。结果表明:橡胶材料硬度、沟槽倒角尺寸对密封性能影响较大,O形圈内径与沟槽圆角尺寸对密封性能影响较小;随着橡胶材料硬度的增加,O形圈密封能力增强,但在相同液体压力条件下,橡胶材料硬度越大O形圈应力越高,增大了O形圈被破坏的可能性,因此,在保证密封性能的前提下,要尽可能选取硬度小的O形圈;随着沟槽倒角尺寸的增加,O形圈的密封性能不断下降,同时应力水平也逐渐降低,因此,设计沟槽倒角尺寸时,在保证密封性能的前提下,要尽可能选取大的倒角尺寸。 相似文献
14.
15.
J. Arghavani M. Derenne L. Marchand 《The International Journal of Advanced Manufacturing Technology》2002,20(8):612-620
Leakage rate prediction and control are of the utmost importance in most industrial applications for gasketed flanged joints
in high-pressure systems, for safety and environmental reasons. In addition, loss of media, and damage to the plant, resulting
from leaky joints can be very costly for the industries. Gasket testing and the evaluation of their sealing performance are
complex, time-consuming, and costly, and require sophisticated tools capable of predicting leakage based on limited data.
In the present work, fuzzy logic is used as a tool to predict the leakage rate and gasket performance of gasketed flanged
joints. Different fuzzy models are developed and validated with experimental results for given operating conditions, taking
into consideration the gasket type and surface roughness of the mating faces. It is shown that limited experimental test data
can be used to build fuzzy models that predict gasket leakage rate and sealing performance. 相似文献
16.
J. Arghavani M. Derenne L. Marchand 《The International Journal of Advanced Manufacturing Technology》2001,18(1):67-78
The paper presents the concept for and the implementation of a fuzzy logic approach in the selection of gaskets, for their
sealing performance, based on system requirements. Gasket sealing performance is complex, owing to numerous parameters affecting
the gasket sealability. A fuzzy decision support system (FDSS) and its application to the selection of sets of optimal parameters
for the joint connections are described. The FDSS is based on the compositional rules of inference, which take into consideration
the fact that many unknown parameters have an influence on the gasket sealing performance. The paper outlines the complex
nature of gaskets, justifying the need for a predictive system capable of dealing with vague information and providing precise
results. It also presents a new methodology for proper gasket selection for a given set of operating conditions, e.g. applied
load, gas pressure, and leakage rate. 相似文献
17.
介绍了日本积水化学生产的新型密封垫材料Exseal的密封性能,并研究了当Exseal泡棉作用在车灯与钣金的密封时,不同环境温度对密封垫Exseal密封性能的影响,同时按大众气密试验标准TL956规定的测试方法对Exseal密封垫的密封性能进行验证。结果表明:与供货状态相比,高温条件和低温条件下的密封垫的反弹力会增大;高温状态下密封垫的黏性力表现优于低温状态下的表现;通过防水总成实验证明了高温状态下Exseal密封垫的可防水气压大于常温及低温状态。 相似文献
18.
水下柔性连接器可解决水下油气管道在连接时因管道角度偏离而无法成功对接的问题。水下连接器的密封结构以球面上的O形圈为主,为了验证连接器密封结构在水下的密封性能,通过对O形圈材料本构方程的计算分析,得到O形圈橡胶材料的重要材料参数;从von Mises应力、接触压力、不同接触面的接触宽度等方面,分析不同介质压力对O形圈密封性能的影响。结果表明:水下柔性连接器密封结构在不同工作状态下均能够保持良好的密封性能,且介质压力越大,O形圈与球形结构上的密封槽之间的接触应力就越大,连接器密封性能有所提升。通过压力试验验证了O形圈球形结构应用在水下是可靠的。 相似文献
19.
以某飞机某部位作动筒渗漏和密封圈扭转断裂的故障为切入点,利用有限元分析软件ANSYS建立O形橡胶密封圈(简称O形圈)的二维轴对称模型,对装配阶段和静压阶段下不同配合间隙、沟槽深度、沟槽宽度、圆柱度和偏载对密封性能的影响进行分析。结果表明:在一定范围内,配合间隙、沟槽深度、沟槽宽度对密封性能影响较大,而圆柱度和偏载对密封性能影响较小;在允许的范围内,较小的配合间隙、合适的沟槽深度和宽度能够得到优异的密封性能。该作动筒的O形圈发生渗漏和扭转断裂的原因为密封槽宽度偏大,综合考虑,对密封槽宽度进行改进能够有效提升O形圈的密封性能。 相似文献