Spatial-coherence modulation for optical interconnections

The spatial coherence of a laser beam depends on the number and the relative weights of the spatial modes supported by the laser waveguide. By electro-optic modulation of the cavity geometry, the spatial-coherence function can be modulated between zero and one at predictable locations across the beam and thus carry information. A simple integrated-optic interferometer is used to decode the signal. Spatial coherence can be modulated independently of the beam intensity and can be used as another level of multiplexing in addition to amplitude modulation, wavelength-division modulation, etc. One can implement a free-space optical interconnection scheme by carrying data on the intensity and address information on the spatial coherence.     

Programmable optical logic systems using free-space optical interconnections

A free-space optical logic technique is presented that utilizes a two-dimensional array of diffractive optical elements. Each optical element focuses light to multiple, separate positions in the output focal plane. The focal spots from different optical elements are allowed to overlap spatially, resulting in interference. By changing the phase shift between the optical elements, one can create different optical logic operations in the focal plane. The technique is demonstrated by the use of two input beams incident onto a multiplexed optical element written onto a programmable spatial light modulator. The optical element simultaneously creates both AND and XOR logic functions in the output plane.     

Self-alignment with optical microconnectors for free-space optical interconnections

A self-alignment technique that uses optical microconnectors forthree-dimensional optics in optical computing systems and opticalinterconnections is proposed. The optical microconnector consistsof an optical plug and a socket. On the output plane of an opticalsystem, optical plugs are made of a photosensitive resin exposed tolight through the optical system. Because the correspondingpositions of the optical plugs are critical to the image formed by theoptical system, a detecting device can be aligned and mounted by theconnection of the optical plugs to sockets formed on the surface of thedevice. Optical microconnectors were experimentally fabricated in areflective block optical system. An alignment accuracy of ~20 mum was attained in the experiment.     

Integrated optoelectronics for optical interconnections and optical processing

Integrated optoelectronics using III–V compound semiconductor technology has so far shown exciting advances for application in optical telecommunication systems. New applications of this technology are in optical interconnections and signal processing systems. The technology is expected to be very effective in solving the wiring limit in data transmission within electronic systems, using the advantages of optical techniques such as high data transmission rate and high parallelism, and thus improve the performance of overall systems. Optical interconnection devices currently being developed aim both at multiplexing vast amounts of data and exhibiting flexible interconnection functions using the advantageous characteristics of light. Future research is expected to explore new techniques such as that for multiplexing and processing data in the wavelength division as well as for integrating functional devices in two-dimensions. Synergetic collaboration among materials and processing, design and fabrication, and packaging areas is extremely important and this will lead to practical optical interconnections and signal processing systems.     

Free-space optical interconnections with liquid-crystal microprism arrays

Liquid-crystal microprism arrays are shown to be useful for providing electrically controlled alignment of optical beams and fixed various free-space optical interconnections. They can deflect closely spaced micro-optical beams individually to any position with high transmittance (95%), high deflection angle (~10°), and low voltage (<2.8 V(rms)). Various fixed optical interconnections can be made simply by changes in the voltages applied to the microprism.     

Design methods for space-variant optical interconnections to achieve optimum power throughput

Optoelectronic systems based on space-variant optics give great freedom to the system designer in terms of interconnect topologies. One feature of space-variant systems is that they can achieve a high interconnect density. However, this density is achieved by having large arrays of diffractive elements with very small apertures relative to the propagation distances involved. Thus diffraction losses from the finite apertures can significantly affect power throughput for these types of systems, regardless of the diffractive efficiencies of the optical elements involved. Therefore it is desirable that this loss be minimized. We present several space-variant optical interconnect design methods (for both one-to-one and fan-out interconnects) and compare them in terms of power throughput for diffraction-limited interconnect distances. Both numerical simulations and experimental results are presented.     

Volume-consumption comparisons of free-space and guided-wave optical interconnections

We compare volume-consumption characteristics of free-space and guided-wave optical interconnections. System volume consumption is used as a fundamental measure of various point-to-point space-invariant and space-variant interconnections of two-dimensional arrays of N(1/2) x N(1/2) points. We show that, in free-space and space-invariant situations, although volume consumption for macroaperture optics is O(1)(N(3/2)), where O denotes the order, it is only O(2)(N) for microaperture optics. For free-space and space-variant operations only microaperture optics is possible without fundamental power losses. The corresponding minimum volume consumption is O(3)(N(3)). We show that single microaperture-per-channel implementations of either space-invariant or space-variant operations are, in general, more volume efficient than are their two-cascade microaperture-per-channel counterparts. We also show that, for minimizing volume consumption, the optimum relative apertures F#(opt) for space-variant optical elements are, respectively, (5N)(1/2)/4 for a single microaperture-per-channel geometry and (5N)(1/2)/2 for a two-cascade microaperture-per-channel geometry. In guided-wave or fiber interconnect cases our study shows that the volume consumption for space-invariant and space-variant operations is O(4)(N), with O(4) < O(2), and O(5)(N(3/2)), respectively. Thus an important conclusion of the study is that free-space optics is less volume efficient than is guided-wave optics in both space-invariant and space-variant interconnect applications.     

Generalized confocal imaging systems for free-space optical interconnections

A generalized confocal imaging system, which is composed of two confocal lenses and one field lens, is proposed for free-space optical interconnections. Unlike in a conventional 4-f system, both the object distance and the image distance can be almost arbitrarily chosen. This advantage is especially important for practical setups in which the object distance and the image distance cannot be designed to be the same. As a concrete example, we have designed and experimentally tested a planar-integrated micro-optical imaging system. The result is in good agreement with the theoretical prediction. Similarly to the conventional 4-f imaging system and the light-pipe imaging system, the system proposed here can also be used as one important part of a hybrid imaging setup.     

Hybrid free-space optical bus system for board-to-board interconnections

A free-space optical bus system is described for board-to-board interconnections at the backplane level. The system uses active optoelectronic modules as the interface between the circuit boards and the electrical backplane. Substrate-mode holograms are used to implement signal broadcast operations between boards, and each board on the backplane shares common free-space channels for transmitting and receiving signals. System-design considerations are given, and the potential performance of the optical bus system is evaluated. An experimental demonstration is also presented for the signal broadcast operation through cascaded substrate-mode holograms at a data rate of 622 Mb/s.     

Static and dynamic Fresnel zone lenses for optical interconnections

Abstract

Static and dynamic Fresnel zone lenses were fabricated in quartz glass by means of microstructuring techniques. Two types of on-axis and offaxis lenses with different focal lengths and of different apertures were designed to operate at wavelengths of 1·52 μm and 633 nm. The blazed profile of the onaxis and off-axis lenses was approximated by up to 16 and up to four discrete levels respectively. Dynamic, that is electrically switchable, lenses have been realized by filling the structured surface with liquid crystal. The optical properties of the lenses, such as the focal spot sizes and the diffraction efficiencies, were investigated. Further the switching behaviour of the dynamic lenses was studied. The design and fabrication of the static and dynamic, on-and off-axis Fresnel zone lenses as well as their optical and switching properties will be presented.     

Digital free-space optical interconnections: a comparison of transmitter technologies

We investigate the performance of free-space optical interconnection systems at the technology level. Specifically, three optical transmitter technologies, lead-lanthanum-zirconate-titanate and multiple-quantum-well modulators and vertical-cavity surface-emitting lasers, are evaluated. System performance is measured in terms of the achievable areal data throughput and the energy required per transmitted bit. It is shown that lead-lanthanum-zirconate-titanate modulator and vertical-cavity surface-emitting laser technologies are well suited for applications in which a large fan-out per transmitter is required but the total number of transmitters is relatively small. Multiple-quantum-well modulators, however, are good candidates for applications in which many transmitters with a limited fan-out are needed.     

Performance evaluation of massively parallel processing architectures with three-dimensional optical interconnections

We evaluate the performance of three-dimensional optoelectronic computer architectures on the basis of basic database operations and parallel benchmark algorithms for numerical computations. We show that the select and the join database operations can be performed much faster with an optical interconnection network. Also, optoelectronic architectures can perform the fast Fourier transform and sorting benchmarks orders of magnitude faster than electronic supercomputers. An architecture with an adequately fast reconfigurable interconnection network can perform the conjugate-gradient benchmark faster than all parallel supercomputers, but its performance is not as impressive when a fixed network is used. In the case of the multigrid benchmark the three-dimensional optoelectronic architecture also can outperform the best parallel supercomputers.     

Scaling of diffractive and refractive lenses for optical computing and interconnections

We discuss both numerically and analytically how the space-bandwidth product and the information density of lenses scale as functions of their diameter and f-number over many orders of magnitude. This information may be useful for the design of optical computing and interconnection systems. For diffractive lenses, cost is defined as the number of resolution elements the lithographic production system must have; the relationship of this quantity to the space-bandwidth product and information density is also given.     

Effects of dead zones in multiple-quantum-well binary-phase modulators on optical interconnections

We investigate the effects of inactive regions [dead zones (DZ's)] in multiple-quantum-well binary-phase modulators used for free-space dynamic optical interconnection applications. Results, however, have implications for other types of pixelated spatial light modulators (SLM's). To our knowledge, the effects of DZ's in SLM's have not before been thoroughly studied in a context other than optical correlation. We investigate the DZ's (considered to be either opaque or transmissive) as a feature that may be exploited in system design, calculating light efficiency and fidelity as a function of DZ fractional width. It is shown that in particular cases an appropriate choice of DZ width would lead to an optical interconnection with substantially improved cross-talk performance.     

The effect of misalignment errors in optical elements of VUV polarimeter

We have designed a Vacuum Ultra Violet polarimeter for Indian Synchrotron Radiation Source Indus-1. This polarimeter will be installed on a toroidal grating monochromator-based beamline. Polarimeter consists of four-mirror phase retarder and three-mirror linear polarizer. Three-mirror linear polarizer has glancing angles of incidence 23°, 46° and 23°, working in 200–1100 Å wavelength region, with linear polarizence greater than 90%. Detailed ray-tracing analysis was carried out to find the effect of various misalignment errors in each of the optical element of the polarimeter. It is found that misalignment errors in optical element of the polarimeter affect only the beam spot position and do not affect the spot size, polarization state and photon flux of outgoing beam, substantially. Accuracies in the linear and angular positions of optical elements in phase retarder and linear polarizer must be very precise to perform ellipsometric experiments. Tolerance limit for various misalignment errors has been obtained. Required accuracy in angular position around X-axis is more than that required in angular position around Z-axis.     

Experimental and numerical analyses of misalignment tolerances in free-space optical interconnects

A comparison of numerical analyses with experimental measurements suggests that both the ray-tracing and the Gaussian beam-propagation models overestimate the misalignment tolerances for on-axis beams and fail to predict the large longitudinal focal shift that occurs for off-axis beams propagating in free-space optical interconnects.     

Integrated-optic array illuminator: a new design for guided-wave optical interconnections

An integrated array illuminator can be used not only as an opticalpower distributor for an array of guided-wave optic devices but also asa key element for guided-wave optical interconnections. We presenta new design for an integrated-optic array illuminator with focusingwaveguide diffractive doublet arrays. This integrated arrayilluminator allows independent optimizations of efficient and uniformoptical power distribution and focusing performance. Furthermore, the device can be fabricated with all-optical lithographic technologyand hence has the advantages of mass production with lowcost.     

Node-based reconfigurable volume interconnections. 1. Principles and optical design

We present a general-purpose three-dimensional interconnection network that models various parallel operations between two data planes. This volume interconnection system exhibits reconfigurable capabilities because of parallel and externally weighted interconnection modules, called nodes. We propose a generic optical implementation based on the cascading of two planar hologram arrays, coupled with a bistable optically addressed spatial light modulator. The role of this component is discussed in terms of energy regeneration and spatial cross-talk limitation. As an example, a binary matrix-matrix multiplier is implemented that uses a ferroelectric liquid-crystal light valve.