Atmospheric pressure matrix-assisted laser desorption/ionization mass spectrometry

A novel ionization source for biological mass spectrometry is described that combines atmospheric pressure (AP) ionization and matrix-assisted laser desorption/ionization (MALDI). The transfer of the ions from the atmospheric pressure ionization region to the high vacuum is pneumatically assisted (PA) by a stream of nitrogen, hence the acronym PA-AP MALDI. PA-AP MALDI is readily interchangeable with electrospray ionization on an orthogonal acceleration time-of-flight (oaTOF) mass spectrometer. Sample preparation is identical to that for conventional vacuum MALDI and uses the same matrix compounds, such as alpha-cyano-4-hydroxycinnamic acid. The performance of this ion source on the oaTOF mass spectrometer is compared with that of conventional vacuum MALDI-TOF for the analysis of peptides. PA-AP MALDI can detect low femtomole amounts of peptides in mixtures with good signal-to-noise ratio and with less discrimination for the detection of individual peptides in a protein digest. Peptide ions produced by this method generally exhibit no metastable fragmentation, whereas an oligosaccharide ionized by PA-AP MALDI shows several structurally diagnostic fragment ions. Total sample consumption is higher for PA-AP MALDI than for vacuum MALDI, as the transfer of ions into the vacuum system is relatively inefficient. This ionization method is able to produce protonated molecular ions for small proteins such as insulin, but these tend to form clusters with the matrix material. Limitations of the oaTOF mass spectrometer for singly charged high-mass ions make it difficult to evaluate the ionization of larger proteins.     

Multiple open-channel electroosmotic pumping system for microfluidic sample handling

The development of a novel, fully integrated, miniaturized pumping system for generation of pressure-driven flow in microfluidic platforms is described. The micropump, based on electroosmotic pumping principles, has a multiple open-channel configuration consisting of hundreds of parallel, small-diameter microchannels. Specifically, pumps with microchannels of 1-6 microm in depth, 4-50 mm in length, and an overall area of a few square millimeters, were constructed. Flow rates of 10-400 nL/min were generated in electric-field-free regions in a stable, reproducible and controllable manner. In addition, eluent gradients were created by simultaneously using two pumps. Pressures up to 80 psi were produced with the present pump configurations. The pump can be easily interfaced with other operational elements of a micrototal analysis system (micro-TAS) device with multiplexing capabilities. A new microfluidic valving system was also briefly evaluated in conjunction with these pumps. The micropump was utilized to deliver peptide samples for electrospray ionization-mass spectrometric (ESI-MS) detection.     

Device for the reversed-phase separation and on-target deposition of peptides incorporating a hydrophobic sample barrier for matrix-assisted laser desorption/ionization mass spectrometry

The separation of peptide mixtures from proteolytic cleavage is often necessary prior to mass spectrometry (MS) to enhance sensitivity and peptide mapping coverage. When buffers, salts, and other higher abundance peptides/contaminants are present, competition for charge during the electrospray ionization and matrix-assisted laser desorption/ionization (MALDI) processes can lead to ion suppression for the targeted analyte(s). In this note, a simple reversed-phase microcolumn sample separation and deposition device (Sep-Dep) is described. The use of this device improves or renders possible the analysis of complex or contaminated peptide mixtures by MALDI-MS. The method is simple and inexpensive and utilizes single-use low-cost Geloader-type columns packed with reversed-phase material. The device described utilizes an open column, allowing for a gradient or narrow-step gradient to be applied by any solvent delivery system or manually with a pipet. A key feature of the device is a deposition chamber that can be custom-built to hold any MALDI target. The Sep-Dep device is attached directly to an in-house vacuum line and draws solvent from the open-ended LC column. The elution of separated peptides is performed directly onto a target that has been treated with a hydrophobic barrier. This barrier effectively isolates fractions and improves the quality and morphology of the matrix crystals. The method produces efficient separations of proteolytic peptides, significantly reducing signal suppression effects in MALDI.     

A microfluidic electrocapture device in sample preparation for protein analysis by MALDI mass spectrometry

The design and operation of a microfluidic device for sample preparation in MALDI mass spectrometry of peptides and proteins is described. It is particularly useful for proteomics applications and for mass determination of proteins in salt- and detergent-containing solutions. The system consists of a flow channel with two conductive areas or electrical junctions where proteins and peptides are retained by means of an electric field. The microfluidic device is made of PEEK tubing, and the junctions are covered with a conductive polymeric membrane. A syringe pump connected to the device produces a flow stream, and injection of sample is carried out manually via hydrodynamic pressure. Proteolytic peptides and intact proteins in salt- and detergent-containing acidic media were captured at the cathode junction followed by exchange of the original solution to a solvent suitable for subsequent mass spectrometry. Using this principle, a significant desalting effect was obtained for tryptic peptides in mass-mapping experiments. Protein sequence coverages were high (up to 40%) at subpicomole levels with results better than those obtained using reversed-phase solid-phase extraction. In contrast to the latter technique, the microfluidic device has the capacity to efficiently remove detergents such as CHAPS before peptide mapping and protein analysis.     

MALDI TOF mass spectrometry for the characterization of phosphorus-containing dendrimers. Scope and limitations

Neutral phosphorus-containing dendrimers with aldehyde groups at the periphery have been analyzed using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOFMS) up to generation four. Although the expected quasi-molecular ion is generally observed, the mass spectral pattern, presence of fragments and adducts related to the original skeleton, is highly relevant to the sample preparation (nature of the matrix: 2-5-dihydroxybenzoic acid (2.5-DHB), 1,8-dihydroxy-9[10H]-anthracenone (dithranol), 6-azathiothymine, 2,4,6-trihydroxyacetophenon, 7-hydroxycoumarin or 2-anthramine, and addition of alkali metal salts). The dithranol matrix with addition of LiI offers milder conditions; however, abundant fragments are still observed for the higher generation dendrimers. Investigation of these effects in connection with SEC, NMR, and MALDI-TOFMS studies of UV preirradiated dendrimers allows the assumption to be made that fragmentation occurs in MALDI due to the relatively strong absorption of the dendrimers at 337 nm. Fragmentations and formation of adducts involve nitrogen-nitrogen bond cleavage, imine metathesis, and reaction of aldehyde groups with internal imino groups.     

Coupling thermal field-flow fractionation with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the analysis of synthetic polymers

Thermal field-flow fractionation (ThFFF) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) have been coupled to yield a powerful combination of techniques for polymer analysis. Thermal FFF's high molecular weight (MW) selectivity and sensitivity to chemical composition are used to separate polydisperse polymers and polymer mixtures into the narrow polydispersity and homogeneous chemical composition fractions essential for MALDI-TOFMS analyses. On the other hand, MALDI-TOFMS's ability to directly measure molecular weight alleviates the need for polymer standards for ThFFF. In this first-time coupling of ThFFF and MALDI-TOFMS, compatibility issues were addressed and optimum conditions and procedures were identified and developed to maximize the capabilities of the combined technique. Depending on the polymer MW and the method of MALDI sample deposition, fractions from 1-10 ThFFF runs were combined for MALDI-TOFMS analysis. Binary solvents were used to enhance ThFFF retention and resolution of low-MW (<15-kDa) polymers, and methods were developed to allow routine MALDI-TOFMS analyses of polystyrene polymers up to 575 kDa. Overall, the MW compatibility of the two techniques was extended from several kilodaltons to several hundred kilodaltons. Polymer fractions were collected after separation by ThFFF and analyzed either by MALDI-TOFMS or reinjection into the ThFFF system. Good agreement was observed between the MW distribution data obtained by MALDI-TOFMS and ThFFF. The application of ThFFF/MALDI-TOFMS to polydisperse polymers and polymer mixtures was demonstrated. This combined technique was also shown to be a viable means for preparing standards from the original polymer sample.     

Sample preparation for MALDI mass spectrometry using an elastomeric device reversibly sealed on the MALDI target

A new method for improving low-concentration sample recovery and reducing sample preparation steps in matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) is presented. In the conventional approach, samples are typically desalted and/or concentrated with various techniques and deposited on the MALDI target as small droplets. In this work, we describe a new approach in which an elastomeric device is reversibly sealed on the MALDI target to form a multi-well plate with the MALDI target as the base of the plate. The new format allows a larger volume (5-200 microL) of samples to be deposited on each spot and a series of sample handling processes, including desalting and concentrating, to be performed directly on the MALDI target. Several advantages have been observed: (i) multiple sample transferring steps are avoided; (ii) recovery of low-concentration peptides during sample preparation is improved using a novel desalting method that utilizes the hydrophobic surface of the elastomeric device; and (iii) sequence coverage of the peptide mass fingerprinting map is improved using a novel method in which proteins are immobilized on the hydrophobic surface of the elastomeric device for in-well trypsin digestion, followed by desalting and concentrating the digestion products in the same well.     

Automatic identification of proteins with a MALDI-quadrupole ion trap mass spectrometer.

A matrix-assisted laser desorption/ionization (MALDI) ion trap mass spectrometer of new design is described. The instrument is based on a commercial Finnegan LCQ ion trap mass spectrometer to which we have added a MALDI ion source that incorporates a sample stage constructed from a compact disk and a new ion transmission interface. The ion interface contains a quadrupole ion guide installed between the skimmer and the octapoles of the original instrument configuration, allowing for operation in both MALDI and electrospray ionization modes. The instrument has femtomole sensitivity for peptides and is capable of collecting a large number of MALDI MS and MALDI MS/MS spectra within a short period of time. The MALDI source produces reproducible signals for 10(4)-10(5) laser pulses, enabling us to collect MS/MS spectra from all the discernible singly charged ions detected in a MS peptide map. We describe the different modes of the instrument operation and algorithms for data processing as applied to challenging protein identification problems.     

抗强干扰快速测量真空规管及仪器的研究

托卡马克装置中存在强磁场、强电场,放电过程中真空度变化迅速。为满足这种特殊环境的真空测量要求,开展了抗强干扰快速测量真空规及仪器的研究。快规使用平板电极结构,在普通热阴极电离规管的基础上增加了调制极;仪器电路除完成稳发射、为加速极供电、离子流放大等基本功能外,它可以提供更大的灯丝电流,为调制极提供周期性脉冲电压,离子流和电子流放大器、调制/解调电路和锁相环电路相互配合,确保快速准确测量。仪器的主控制单元以微处理器为核心,可以设定系统运行的相关参数,离子流、发射电流、灯丝电流可供主控单元采集,以配合完成自动调整和相应控制。     

Impulse-driven heated-droplet deposition interface for capillary and microbore LC-MALDI MS and MS/MS

An automated off-line liquid chromatography-matrix-assisted laser desorption ionization (LC-MALDI) interface capable of coupling both capillary and microbore LC separations with MALDI mass spectrometry (MS) and tandem mass spectrometry (MS/MS) has been developed. The interface is a combination of two concepts: analyte concentration from heated hanging droplets and impulse-driven droplet deposition of LC fractions onto a MALDI sample plate. At room temperature the interface allows the coupling of capillary LC separations (i.e., flow rate of <5 microL/min) with MALDI MS. With heating, it can be used to combine microbore LC operated at a relatively high flow rate of up to 50 microL/min with MALDI MS. The collected fractions can be analyzed by MALDI MS and MS/MS instruments, such as time-of-flight (TOF) and quadrupole-TOF MS. Performance of the interface was examined using several peptide and protein standards. It was shown that, using MALDI-TOF MS, [GLU1]-fibrinopeptide B could be detected with a total injection amount of 5 fmol to microbore LC. Chromatographic performance was also monitored. A peak width of 12 s at half-height for [GLU1]-fibrinopeptide B showed no evidence of band broadening due to the interface. The ability of the interface to mitigate ion suppression was studied using a mixture of 100 fmol of [GLU1]-fibrinopeptide B and 10 pmol of cytochrome c tryptic digest. Although fully suppressed under direct MALDI conditions, LC-MALDI analysis was able to detect the 100 fmol peptide with 10 s fraction collection. Finally, the ability to inject relatively large sample amounts to improve detectability of low-abundance peptides was illustrated in the analysis of phosphopeptides from alpha-casein tryptic digests. A digest loaded on column to 2.4 microg and analyzed by LC-MALDI MS/MS resulted in 82% sequence coverage and detection of all nine phosphoserine residues. It is concluded that, being able to handle both high- and low-flow LC separations, the impulse-driven heated-droplet interface provides the flexibility to carry out MALDI analysis of peptides and proteins depending on the information sought after, analysis speed, and sample size.     

Detection of phosphorylated peptides in proteomic analyses using microfluidic compact disk technology

A compact disk (CD)-based microfluidic method for selective detection of phosphopeptides by mass spectrometry is described. It combines immobilized metal affinity chromatography (IMAC) and enzymatic dephosphorylation. Phosphoproteins are digested with trypsin and processed on the CD using nanoliter scale IMAC with and without subsequent in situ alkaline phosphatase treatment. This is followed by on-CD matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. Dephosphorylation of the IMAC-enriched peptides allows selective phosphopeptide detection based on the differential mass maps generated (mass shifts of 80 Da or multiples of 80 Da). The CD contains 96 microstructures, each with a 16 nL IMAC microfluidic column. Movement of liquid is controlled by differential spinning of the disk. Up to 48 samples are distributed onto the CD in two equal sets. One set is for phosphopeptide enrichment only, the other for identical phosphopeptide enrichment but combined with in situ dephosphorylation. Peptides are eluted from the columns directly into MALDI target areas, still on the CD, using a solvent containing the MALDI matrix. After crystallization, the CD is inserted into a MALDI mass spectrometer for analysis down to the femtomole level. The average success rate in phosphopeptide detection is over 90%. Applied to noncharacterized samples, the method identified two novel phosphorylation sites, Thr 735 and Ser 737, in the ligand-binding domain of the human mineralocorticoid receptor.     

A rotating ball inlet for on-line MALDI mass spectrometry

The rotating ball inlet (ROBIN) is presented in a new design for on-line matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS). This method uses a capillary to deliver a matrix and analyte solution to the surface of a rotating ball upon which MALDI is carried out. The ball is in contact with a polymer gasket surrounding the capillary. Sample adhering to the surface of the ball is dragged past the gasket into the vacuum of the mass spectrometer where it is irradiated by a pulsed UV laser, and the resulting ions are mass-separated in a linear time-of-flight mass spectrometer. The mechanical sample introduction prevents clogging of the vacuum interface by matrix crystals or frozen solvent. Preliminary results from flow injection analysis (FIA) suggest that the new interface does not introduce a significant peak-tailing or memory effect. The system is capable of 20-30 h of continuous operation with a flow rate of 2 microL/min before cleaning of the ball is needed. With the prototype inlet, concentration detection limits are at the low micromolar level.     

Integrated sample preparation and MALDI mass spectrometry on a microfluidic compact disk

High-throughput microfluidic processing of protein digests integrated with matrix-assisted laser desorption/ionization (MALDI) mass spectrometry on a compact disk (CD) is described. Centrifugal force moves liquid through multiple microstructures, each containing a 10-nL reversed-phase chromatography column. The CD enables parallel preparation of 96 samples with volumes ranging from one to several microliters. The peptides in the digests are concentrated, desalted, and subsequently eluted from the columns directly into MALDI target areas (200 x 400 microm) on the CD using a solvent containing the MALDI matrix. After crystallization, the CD is inserted into the MALDI instrument for peptide mass fingerprinting and database identification at a routine sensitivity down to the 200-amol level. Detection of proteolytic peptides down to the 50-amol level is demonstrated. The success rate of the CD technology in protein identification is about twice that of the C(18) ZipTips and standard MALDI steel targets. The CDs are operated using robotics to transfer samples and reagents from microcontainers to the processing inlets on the disposable CD and spinning to control the movement of liquid through the microstructures.     

The characteristics of peptide collision-induced dissociation using a high-performance MALDI-TOF/TOF tandem mass spectrometer

A new matrix-assisted laser desorption/ionization (MALDI) time-of-flight/time-of-flight (TOF/TOF) high-resolution tandem mass spectrometer is described for sequencing peptides. This instrument combines the advantages of high sensitivity for peptide analysis associated with MALDI and comprehensive fragmentation information provided by high-energy collision-induced dissociation (CID). Unlike the postsource decay technique that is widely used with MALDI-TOF instruments and typically combines as many as 10 separate spectra of different mass regions, this instrument allows complete fragment ion spectra to be obtained in a single acquisition at a fixed reflectron voltage. To achieve optimum resolution and focusing over the whole mass range, it may be desirable to acquire and combine three separate sections. Different combinations of MALDI matrix and collision gas determine the amount of internal energy deposited by the MALDI process and the CID process, which provide control over the extent and nature of the fragment ions observed. Examples of peptide sequencing are presented that identify sequence-dependent features and demonstrate the value of modifying the ionization and collision conditions to optimize the spectral information.     

Mass spectrometry after capture and small-volume elution of analyte from a surface plasmon resonance biosensor

The identification of binding partners of proteins by mass spectrometry following specific capture on a biosensor surface is a promising tool for proteomics research and the identification and characterization of protein-protein interactions. Previous approaches include the direct ionization of analyte from the biosensor chip on a matrix assisted laser desorption ionization time-of-flight mass spectrometer (MALDI-TOFMS) apparatus and the on-chip digestion followed by elution, chromatographic concentration of the fragments, and electrospray mass spectrometry. In the present paper, using the small-volume microfluidic sample manipulation technique with oscillatory flow reported recently (Abrantes et al. Anal. Chem. 2001, 73, 2828-2835), analyte is shown to be eluted from the sensor surface into a small volume of buffer that promotes dissociation from the capture surface and delivery to the mass spectrometer. Both the incubation of the sensor surface with the sample and the recovery of analyte can be achieved with a few microliters and conducted until steady-state is attained. Because the procedure is non-destructive for the sensor surface, multiple cycles of capture and elution allow the transfer and concentration of analyte into the elution buffer. The eluted analyte can be studied directly by MALDI-TOFMS, or subjected to proteolytic digestion for protein identification. Transfer into the elution buffer and MALDI-TOFMS detection was achieved from 5 microL of starting samples containing <50 fmol of analyte. Examples are presented for the specific detection and recovery of a protein from a complex mixture of cytosolic proteins.     

Ein neues hochgenaues und zuverlässiges Ionisationsvakuummeter

A new highly accurate and reliable ionization vacuum meter – Permanent relative gas sensitivity sets new standard for manufacturers and users A novel ionization vacuum meter offers a solution to the previously insufficient stability of commercially available devices and enables predictable sensitivities. This is made possible by straight-line guidance of the ionizing electrons as they travel through the ionization space. The new high vacuum gauge is suitable for applications as a reference gauge and in process plants where high reproducibility is required. Even without calibration, the instrument offers a measurement uncertainty of less than 5%, making it commercially interesting for both manufacturers and users.     

Rapid profiling of induced proteins in bacteria using MALDI-TOF mass spectrometric detection of nonporous RP HPLC-separated whole cell lysates.

A method for rapid profiling of water-soluble proteins from whole cell lysates has been developed using matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectrometry (TOFMS) following separation by reversed-phase high-performance liquid chromatography (RP HPLC). Rapid separation of proteins from cell lysates was achieved using columns packed with C18 nonporous (NP) silica beads. Using this method, the whole cell lysate water-soluble proteins of E. coli were separated in under 15 min. A method using two columns in series at different temperatures was used in order to provide high loadability without loss of separation efficiency. The nonporous packing in the columns provided for high recovery. Eluting fractions were collected and analyzed by MALDI-TOFMS to determine the molecular weights and peptide maps of the proteins. These methods provided for the rapid screening and identification of proteins from E. coli where the response of E. coli to L-arabinose induction was studied. In this work, it is demonstrated that NP RP HPLC with MALDI-TOFMS detection may serve as a rapid means of detecting and identifying changes in bacterial protein expression due to external stimuli.     

Extending the laserspray ionization concept to produce highly charged ions at high vacuum on a time-of-flight mass analyzer

A new matrix compound, 2-nitrophloroglucinol, is reported which not only produces highly charged ions similar to electrospray ionization (ESI) under atmospheric pressure (AP) and intermediate pressure (IP) laserspray ionization (LSI) conditions but also the most highly charged ions so far observed for small proteins in mass spectrometry (MS) under high vacuum (HV) conditions. This new matrix extends the compounds that can successfully be employed as matrixes with LSI, as demonstrated on an LTQ Velos (Thermo) at AP, a matrix-assisted laser desorption/ionization (MALDI)-ion mobility spectrometry (IMS) time-of-flight (TOF) SYNAPT G2 (Waters) at IP, and MALDI-TOF Ultraflex, UltrafleXtreme, and Autoflex Speed (Bruker) mass spectrometers at HV. Measurements show that stable multiple charged molecular ions of proteins are formed under all pressure conditions indicating softer ionization than MALDI, which suffers a high degree of metastable fragmentation when multiply charged ions are produced. An important analytical advantage of this new LSI matrix are the potential for high sensitivity equivalent or better than AP-LSI and vacuum MALDI and the potential for enhanced mass selected fragmentation of the abundant highly charged protein ions. A second new LSI matrix, 4,6-dinitropyrogallol, produces abundant multiply charged ions at AP but not under HV conditions. The differences in these similar compounds ability to produce multiply charged ions under HV conditions is believed to be related to their relative ability to evaporate from charged matrix/analyte clusters.     

Identification of 4-hydroxy-2-nonenal-modified peptides within unfractionated digests using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The lipid peroxidation product 4-hydroxy-2-nonenal (HNE) is generated as a consequence of oxidative stress and can readily react with nucleophilic sites of proteins (e.g., histidine residues), mainly via a Michael addition. The formation of such lipid-protein conjugates can alter protein properties and biological functions, thus leading to highly deleterious effects. The present work describes a rapid (very limited sample preparation) and sensitive (low-femtomole range) procedure to identify HNE-modified peptides (Michael adducts) within unfractionated tryptic digests. The protocol involves the formation of dinitrophenylhydrazones of the Michael adducts, when using 2,4-dinitrophenylhydrazine as reactive matrix, followed by analysis using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The hydrazone derivatives present high desorption/ionization yield and can thus be preferentially detected compared to unmodified peptides. The MALDI mass spectrum obtained is therefore drastically different from the one obtained with the classical 4-hydroxy-alpha-cyanocinnamic acid matrix. Moreover, the presence of HNE, or more generally speaking carbonylated peptides, could be highlighted by 180 mass units differences (corresponding to the dinitrophenylhydrazone moiety) between these two MALDI mass spectra. Further information (e.g., localization/identification of the modified residues, peptide sequences) could be obtained by performing MALDI postsource decay (or electrospray) MS/MS experiments on the ions of interest.     

Poly[N-(2-hydroxypropyl)methacrylamide]-based tissue-embedding medium compatible with MALDI mass spectrometry imaging experiments

Traditional tissue-sectioning techniques for histological samples utilize various embedding media to stabilize the tissue on a sectioning target and to provide a smooth cutting surface. Due to the ion suppression effect in MALDI ionization and number of background peaks in the low-mass region, these media are not suitable for mass spectrometry imaging (MSI) experiments. To overcome this, droplets of water are often used to mount the tissue on a sectioning target, but the ice block formed around the tissue does not provide a good support for sectioning of fragile samples. In this work, we propose a novel embedding media, compatible with MALDI ionization and MSI experiments, based on poly[N-(2-hydroxypropyl)methacrylamide] (pHPMA). Using a reversible addition-fragmentation chain transfer polymerization technique, well-defined pHPMA polymer with narrow mass distribution was prepared. Benefits of the resulted pHPMA-based embedding media were tested on different tissue samples.