一种适用于无线网络的AODV-MPR协议研究

为了降低无线自组网按需平面距离矢量路由(AODV)协议在维护路由时广播参数中源地址和目的地址均为本节点地址的路由应答报文(HELLO消息)时的网络开销,提出了一种基于广播中继(MPR)的AODV路由协议改进方案,对AODV的HELLO消息机制进行了改进,并在NS2中对改进协议和原AODV协议进行了对比仿真。仿真结果证明:改进的AODV协议在网络吞吐量、端到端时延和丢包率方面均优于原AODV协议。     

基于跨层设计的AODV路由优化机制

以AODV(无线自组网按需平面距离矢量路由)协议为原型,针对WMN(无线Mesh网)中传统AODV协议路由判据单一从而导致路由性能较差的缺陷,采用跨层设计方法为WMN设计了一种新的IAODV(优化的AODV)协议。在路由计算过程中通过跨层操作机制提取节点当前负载和链路投递率这两个影响链路质量的因素,结合路由跳数设计出合理的路由判决函数。理论分析和NS2仿真结果证明,这种路由优化机制提高了吞吐量,降低了网络时延,并且能够达到负载均衡的路由效果。     

基于AODV的多度量无线路由算法研究

随着移动自组网络的快速发展,对距离矢量按需路由协议(AODV)的服务质量提出了越来越高的要求.为了提升AODV在无线传感器网络通信中的表现,文章提出了一种新型的基于AODV的多度量无线路由协议(MWR-AODV).MWR-AODV综合考虑了对路由协议性能影响重大的最小跳数、剩余能量、能量流失率和网络节点密度这四个因素,并且引入了一种低成本且高效的本地修复策略.通过Network Simulator-2仿真平台对MWR-AODV与标准AODV、DSDV协议的表现进行了仿真分析.结果表明,所提出的MWR-AODV能为无线传感器网络提供更好的通信服务,并且在均衡能量消耗延长网络寿命和平衡网络通信负载方面也有上佳表现.     

基于移动性的AODV路由协议改进

介绍了Ad Hoc网络路由协议（Ad Hoc On-Demand Distance Vector Routing,AODV）的路由机制和特点,提出了一种基于AODV的改进协议V-AODV。V-AODV改进了AODV的路由测度,用量化的节点移动性代替跳数作为路由代价的度量,在动态网络中能够选取到更加稳定的路由。仿真表明,V-AODV比AODV在时延和重传次数等性能上都有一定程度的提升。     

基于不同路由协议的Ad hoc网络控制仿真研究

基于Ad hoc中经典的AODV(Ad hoc按需距离矢量路由协议)和DSDV(目的序列距离矢量路由协议)两种路由协议,文章选取了对控制系统性能影响很大的时延、丢包率、控制稳定性等参数来做比较,分析了基于两个协议的控制性能。通过NS的仿真得出了在网络规模不大的情况下,AODV协议相比于DSDV协议来说,更适合进行网络控制,其稳定性更高,并且在网络拓扑变化激烈的情况下,控制系统稳定性差距更加明显。     

基于代价函数的改进AODV协议

Ad Hoc网络中如何设计良好的路由协议使其网络均衡是当今研究的重点。针对网络负载和能量均衡等问题,提出了一种基于代价函数的改进按需距离矢量路由协议CF-AODV。该协议在路由建立过程中,通过能量阈值和缓存队列长度阈值进行RREQ转发判断;在目的节点选取路由时采用延迟应答方案,通过以路径长短、路径负载、路径剩余能量作为因子的代价函数进行判决来选取最佳路径。仿真结果表明,所提协议在网络负载和能量上得到了均衡,可以延长网络寿命,减轻网络拥塞,减少时延和丢包率。     

Ad Hoc网络中两种按需路由协议的比较

Ad hoc网络的特征是多跳的无线连接，网络拓扑的频繁变化，以及需要有效的动态路由协议。重点比较Ad hoc网络中两种主要的按需路由协议：动态源路由（DSR）协议和Ad hoc按需距离矢量路由（AODV）协议。尽管DSR和AODV都是按需路由协议，但不同的协议机制导致了网络性能的显著差异。在OPNET仿真平台下，对采用不用路由协议的网络时延和吞吐量进行比较，从而分析不同的路由机制引起的网络性能差异。     

一种位置信息辅助的Ad Hoc网络按需距离矢量路由协议

 针对Ad Hoc网络中按需距离矢量路由协议路由开销大,以及位置路由中位置信息在获取方式上存在的缺点,提出一种位置信息辅助的按需距离矢量路由协议(LAODV),协议结合AODV以按需的方式获取网络节点的位置信息,并以泛洪、位置信息修正的贪婪转发和局部受限泛洪相结合方式进行路由发现,同时提出了路由维护策略和局部多径备份路由策略。仿真结果表明,LAODV能够获得较好的分组递交率、时延和路由开销性能。     

Ad hoc网络按需路由协议的研究

Ad hoc网络是一种能随时随地组成网络而不需要任何固定的底层设备支持的自组网,因而得到越来越广泛的应用。Ad hoc网络通常的应用领域包括灾难等突发性事件的恢复、人群控制、寻找和援救等,也用于战场上的相互联络。文章主要针对按需式路由协议中流行的一种Ad hoc按需平面距离矢量路由协议（AODV）进行研究,利用NS2仿真平台对AODV路由协议进行了仿真,全面分析了AODV路由协议的性能。     

无线传感器网络路由协议的设计与实现

针对传统路由协议端到端时延长、丢包率过高的现实问题,提出了一种基于贪婪转发的能量感知多路径路由协议(Greedy Forward Energy-aware Multipath Routing Protocol,GFEMRP)。GFEMRP从传感器起始结点出发,如果遇到网络黑洞则选择周边转发方式,否则将选择吞吐量大、且更接近于目的结点的结点作为下一跳结点。利用了OMNET++5.0和INET框架对包括无线自组网按需平面距离向量路由协议(Ad hoc on-demand distance vector routing protocol,AODV),动态按需无线自组织网络(Dynamic MANET On-demand,DYMO),贪婪周边无状态路由无线网络(Greedy Perimeter Stateless Routing for Wireless Networks,GPSR)和GFEMRP协议在内的四种路由协议进行了仿真和比较,实验结果表明GFEMRP协议具有良好的端到端时延、丢包率等性能。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.