共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
提出了一种仿生马构型的四足步行机器人,以用于马术辅助治疗。其单腿系统利用凸轮连杆组合机构驱动,具有两个驱动自由度,能够实现足端轨迹跨距与高度的调整。论述了凸轮连杆组合机构驱动的仿生马机器人结构与工作原理,开展了机器人的运动仿真研究。利用Solid Works软件建立机器人模型,并导入到Adams软件中进行动力学仿真分析。通过运动规划给定电机驱动函数,实现了仿生马机器人的行走运动。进一步分析得到了机器人在抬腿和落地运动过程中,足端与地面之间的接触力变化规律及相应的运动轨迹变化趋势。针对仿生马机器人运动仿真中整体出现的跳动现象,提出了采用电机变驱动规律以改良跳动的措施。研究结果为该类机器人参数的优化设计及实用化提供了理论支持。 相似文献
4.
针对轮式移动机器人越障能力不足的问题,设计出了一种兼具轮式和足式移动机构特点的圆弧腿仿生六足机器人。完成了基于飞思卡尔MC568037型DSP及CAN总线的机器人控制系统的设计;对机器人的运动步态、静力学及运动学模型进行了研究,并采用ADAMS仿真软件对运动学模型进行了验证;提出了一种基于三角函数规律的电机转速曲线。最后对电机驱动系统、机器人的越障及转向性能进行了测试。实验结果表明,机器人驱动电机的控制系统具有良好的响应特性,机器人可通过30 cm高的障碍,并且具有较小的转向半径,环境适应性强。 相似文献
5.
基于螺旋理论的冗余液压驱动四足机器人运动学分析 总被引:1,自引:0,他引:1
四足机器人的各种研究大多基于四条腿弯曲方向一致展开的。对于液压驱动且具有冗余度的四足机器人,静止姿态下,其前面两条腿与后面两条腿成对称弯曲状。为了研究这种机器人单腿运动和躯体运动状态,文中建立了基于螺旋理论的液压驱动四足机器人运动学模型,包括给出了单腿串联运动学逆解和躯体并联运动学正解。然后根据机器人行走过程设计出后面两条腿的髋关节与膝关节摆幅角度,通过建立的运动学模型,得到前面两条腿的关节变量及躯体姿态。最后通过MATLAB数值仿真和ADAMS虚拟样机实验,对机器人在一种行走方案下的躯体运动姿态进行仿真对比,验证了所建运动学模型的可靠性。 相似文献
6.
7.
四足步行机器人腿机构及其稳定性步态控制 总被引:12,自引:0,他引:12
结合实际 ,详细地分析了四足步行机器人的步态和腿机构的运动关系 ,并在此基础上给出了四足步行机器人腿部机构和驱动控制方案。 相似文献
8.
设计了一种四足机器人,采用绳传动和"十"字型髋关节相结合的腿部结构,足部采用具有可复位和减震功能的双弹簧结构。采用Creo Parametric和Adams软件联合建立虚拟样机,对机器人整体进行直向爬行步态仿真,结果表明机器人可以按规划的步态稳定行走。对比电机直接驱动四足机器人的仿真结果表明:绳传动机器人具有更好的运动性能。 相似文献
9.
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献