Influence of morphologies on the field emission performance of oriented ZnO nano-arrays

Different morphologies of comb-like ZnO and oriented ZnO nano-arrays such as ZnO nanoneedles and ZnO nanorods were synthesized by using flexible thermal evaporation method via simply adjusting the temperature and oxygen content.The ZnO nanorods arrays have the lowest turn-on field,highest current density and the largest emission efficiency owning to its good contact with the substrate and relatively weaker field screening effects. The experiments show that the morphologies and orientation of one-dimensional(1D) ZnO nanomaterials have considerable effects on the turn-on field and the emission current density,and the nanoarray also contributes to electrons emission.The results could be valuable for the application of ZnO nanorod arrays as cathode materials in field emission based devices.     

基于插入WO3缓冲层并五苯有机场效应晶体管性能的研究

The pentacene-based organic field effect transistor （OFET） with a thin transition metal oxide （WO3） layer between pentacene and metal （AI） source/drain electrodes was fabricated. Compared with conventional OFET with only metal AI source/drain electrodes, the introduction of the WO3 buffer layer leads to the device performance enhancement. The effective field-effect mobility and threshold voltage are improved to 1.90 em2/（V.s） and 13 V, respectively. The performance improvements are attributed to the decrease of the interface energy barrier and the contact resistance. The results indicate that it is an effective approach to improve the OFET performance by using a WO3 buffer layer.     

Field emission characteristics of nano-diamond cathode surface by graphitization pretreatment

Cathode samples of nano-diamond by graphitization pretreatment with different temperatures were fabricated by electrophoresis, then the structures and morphologies of the cathode samples were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD), and the field emission tests were conducted. The effects of graphitization pretreatment on the field emission characteristics of nano-diamond cathode surface on titanium substrate are studied. The results indicate that the surface morphologies of nano-diamond cathode samples after graphitization pretreatment change a lot, and the field emission characteristics in low-voltage area are improved obviously. However, in high-voltage area, the curve distortion happens, and it doesn’t conform the mechanism of field emission characteristics.     

Fluorescence enhancement of single-phase red-blue emit-ting Ba_3MgSi_2O_8:Eu~(2 ),Mn~(2 ) phosphors via Dy~(3 ) addition for plant cultivation

Fluorescence enhancement of red and blue concurrently emitting Ba3MgSi2O8:Eu2 ,Mn2 phosphors for plant cultivation has been investigated by Dy3 addition.The Ba3MgSi2O8:Eu2 ,Mn2 ,Dy3 (BMS-EMD) phosphors have two-color emissions at the wavelength peak values of 437 nm and 620 nm at the excitation of 350 nm.The two emission bands are coincident with the absorption spectrum for photosynthesis of plants.An obvious enhancement effect has been observed upon addition of Dy3 with amount of 0.03 mol%,in which the intensities of both blue and red bands reach a maximum.The origin of red and blue emission bands is analysed.The photochromic parameters of the samples at the nearly UV excitation are tested.This fluoresence enhancement is of great significance for special solid state lighting equipment used in plant cultivation.     

Defect-related visible luminescence of ZnO nanorods annealed in oxygen ambient

ZnO nanorods prepared by a solution-phase method are annealed at different temperatures in oxygen ambient.The luminescence properties of the samples are investigated.In the same excitation condition,the photoluminescence(PL) spectra of all samples show an ultraviolet(UV) emission and a broad strong visible emission band.The asymmetric visible emis-sion band of annealed samples has a red-shift as the annealing temperature increasing from 200 ℃ to 600 ℃ and it can be deconvoluted into two subband emissions centered at 535 nm(green emission) and 611 nm(orange-red emission) by Gaussian-fitting analysis.Analyses of PL excitation(PLE) spectra and PL spectra at different excitation wavelengths reveal that the green emission and the orange-red emission have a uniform initial state,which can be attributed to the electron transition from Zn interstitial(Zni) to oxygen vacancy(Vo) and oxygen interstitial(Oi),respectively.     

Nitrogen-induced enhancement of luminescence of blue-emitting Sr2MgSi2O7：Eu^2＋ phosphors for light-emitting diodes

The near-ultraviolet (n-UV) excited blue-emitting Sr2MgSi2O7:Eu2+ phosphors are used for fluorescence lamp and tricolor white LEDs. The effect of nitrogen-doped on the structure of the host and the enhancement of photoluminescence is experimentally investigated. The results show that as the amount of nitrogen-doped varies from 0 to 0.6 (at.), the luminous intensity is found to be increased to 169%, and the partial replacement of O by N results in a change of the crystal field by modifying the sy...     

Giant magneto field effect in up-conversion amplified spontaneous emission via spatially extended states in organic-inorganic hybrid perovskites

Up-conversion lasing actions are normally difficult to realize in light-emitting materials due to small multi-photon absorp-tion cross section and fast dephasing of excited states during multi-photon excitation.This paper reports an easily ac-cessible up-conversion amplified spontaneous emission(ASE)in organic-inorganic hybrid perovskites(MAPbBr3)films by optically exciting broad gap states with sub-bandgap laser excitation.The broad absorption was optimized by adjust-ing the grain sizes in the MAPbBr3 films.At low sub-bandgap pumping intensities,directly exciting the gap states leads to 2-photon,3-photon,and 4-photon up-conversion spontaneous emission,revealing a large optical cross section of multi-photon excitation occurring in such hybrid perovskite films.At moderate pumping intensity(1.19 mJ/cm2)of 700 nm laser excitation,a significant spectral narrowing phenomenon was observed with the full width at half maximum(FWHM)de-creasing from 18 nm to 4 nm at the peak wavelength of 550 nm,simultaneously with a nonlinear increase on spectral peak intensity,showing an up-conversion ASE realized at low threshold pumping fluence.More interestingly,the up-con-version ASE demonstrated a giant magnetic field effect,leading to a magneto-ASE reaching 120%.In contrast,the up-conversion photoluminescence(PL)showed a negligible magnetic field effect(<1%).This observation provides an evid-ence to indicate that the light-emitting states responsible for up-conversion ASE are essentially formed as spatially exten-ded states.The angular dependent spectrum results further verify the existence of spatially extended states which are polarized to develop coherent in-phase interaction.Clearly,using broad gap states with spatially extended light-emitting states presents a new approach to develop up-conversion ASE in organic-inorganic hybrid perovskites.     

Fabrication and field emission characteristics of a novel planar-gate electron source with patterned carbon nanotubes for backlight units

This paper describes the fabrication of backlight units(BLUs) for a liquid crystal display(LCD) based on a novel planar-gate electron source with patterned carbon nanotubes(CNTs) formed by electrophoretic deposition. The electric field distributions and electron trajectories of this triode structure are simulated according to Ansys software.The device structure is optimized by supporting numerical simulation.The field emission results show that the emission current depends strongly on the cathode-gate gap and the gate voltage.Direct observation of the luminous images on a phosphor screen reveals that the electron beams undergo a noticeable expansion along the lateral direction with increasing gate voltage,which is in good agreement with the simulation results.The luminous efficiency and luminance of the fabricated device reaches 49.1 lm/W and 5500 cd/m2,respectively.All results indicate that the novel planar-gate electron source with patterned CNTs may lead to practical applications for an electron source based on a flat lamp for BLUs in LCD.     

Property comparison of polarons in zinc-blende and wurtzite GaN/AlN quantum wells

The properties of polarons in zinc-blende and wurtzite GaN/AlN quantum wells with Fr(o|¨)hlich interaction Hamiltonians are compared in detail.The energy shifts of polarons at ground state due to the interface(IF), confined(CO) and half-space phonon modes are calculated by a finite-difference computation combined with a modified LLP variational method.It is found that the two Fr(o|¨)hlich interaction Hamiltonians are consistent with each other when the anisotropic effect from the z-direction and the x-y plane is neglected.The influence of the anisotropy on the polaron energy shifts due to the IF phonon modes for a smaller well width or due to the CO phonon modes for a moderate well width is obvious.In addition,the built-in electric field has a remarkable effect on the polaron energy shifts contributed by the various phonon modes.     

Investigation of Concrete Distortion with Real—tim Holographic Medhod

In order to find the relationships between the distortion rule of the concrete and its surrounding stress field,a real-time optical holographic setup is used to record the distribution and the variation of the samples,the waveforms of ultrasonic emission stimulated by the micro-cracks are recorded by a transient automaic waveform recorder th determine the time,location and intensity of the actions of micro-cracks,The experiment results are worthy studying.This method provides a useful experimental approach to study the brittleness materials.     

多层铜布线CMP后表面残留CuO颗粒的去除研究

This article introduces the removal technology of CuO particles on the post CMP wafer surface of multi-layered copper. According to the Cu film corrosion curve with different concentrations of HEO2 and the effect curve of time on the growth rate of CuO film, CuO film with the thickness of 220 nm grown on Cu a surface was successfully prepared without the interference of CuC12.2H20. Using the static corrosion experiment the type of chelating agent （FA/O II type chelating agent） and the concentration range （10-100 ppm） for CuO removal was determined, and the Cu removal rate was close to zero. The effect of surfactant on the cleaning solution properties was studied, and results indicated that the surfactant has the effect of reducing the surface tension and viscosity of the cleaning solution, and making the cleaning agent more stable. The influence of different concentrations of FA/O I type surfactant and the mixing of FA/O II type chelating agent and FA/O I type surfactant on the CuO removal effect and the film surface state was analyzed. The experimental results indicated that when the concentration of FA/O I type surfactant was 50 ppm, CuO particles were quickly removed, and the surface state was obviously improved. The best removal effect of CuO on the copper wiring film surface was achieved with the cleaning agent ratio of FA/O II type chelating agent 75 ppm and FA/O I type surfactant 50 ppm. Finally, the organic residue on the copper pattern film after cleaning with that cleaning agent was detected, and the results showed that the cleaning used agent did not generate organic residues on the film surface, and effectively removes the organic residue on the water.     

Ranking Potential Reply-Providers in Community Question Answering System

Community Question Answering （CQA） websites have greatly facilitated users＇ lives, with an increasing number of people seeking help and exchanging ideas on the Internet. This newlymerged community features two characteristics： social relations and an ask-reply mechanism. As users＇ behaviours and social statuses play a more important role in CQA services than traditional answer retrieving websites, researchers＇ concerns have shifted from the need to passively find existing answers to actively seeking potential reply providers that may give answers in the near future. We analyse datasets derived from an online CQA system named ＂Quora＂, and observed that compared with traditional question answering services, users tend to contribute replies rather than questions for help in the CQA system. Inspired by the findings, we seek ways to evaluate the users＇ ability to offer prompt and reliable help, taking into account activity, authority and social reputation char- acteristics. We propose a hybrid method that is based on a Question-User network and social network using optimised PageRank algorithm. Experimental results show the efficiency of the proposed method for ranking potential answer-providers.     

一个全差分可编程的多通道神经信号记录芯片

A multi-channel,fully differential programmable chip for neural recording application is presented.The integrated circuit incorporates eight neural recording amplifiers with tunable bandwidth and gain,eight 4thorder Bessel switch capacitor filters,an 8-to-1 analog time-division multiplexer,a fully differential successive approximation register analog-to-digital converter(SAR ADC),and a serial peripheral interface for communication.The neural recording amplifier presents a programmable gain from 53 dB to 68 dB,a tunable low cut-off frequency from 0.1 Hz to 300 Hz,and 3.77 μVrms input-referred noise over a 5 kHz bandwidth.The SAR ADC digitizes signals at maximum sampling rate of 20 kS/s per channel and achieves an ENOB of 7.4.The integrated circuit is designed and fabricated in 0.18-μm CMOS mix-signal process.We successfully performed a multi-channel in-vivo recording experiment from a rat cortex using the neural recording chip.     

A power-efficient 12-bit analog-to-digital converter with a novel constant-resistance CMOS input sampling switch

Apower-efficient 12-bit40-MS/spipelineanalog-to-digitalconverter（ADC）implementedina0.13 μm CMOS technology is presented. A novel CMOS bootstrapping switch, which offers a constant on-resistance over the entire input signal range, is used at the sample-and-hold front-end to enhance the dynamic performance of the pipelined ADC. By implementing with 2.5-bit-per-stage and a simplified amplifier sharing architecture between two successive pipeline stages, a very competitive power consumption and small die area can be achieved. Meanwhile, the substrate-biasing-effect attenuated T-type switches are introduced to reduce the crosstalk between the two op- amp sharing successive stages. Moreover, a two-stage gain boosted recycling folded cascode （RFC） amplifier with hybrid frequency compensation is developed to further reduce the power consumption and maintain the ADC＇s performance simultaneously. The measured results imply that the ADC achieves a spurious-free dynamic range （SFDR） of 75.7 dB and a signal-to-noise-plus-distortion ratio （SNDR） of 62.74 dB with a 4.3 MHz input signal; the SNDR maintains over 58.25 dB for input signals up to 19.3MHz. The measured differential nonlinearity （DNL） and integral nonlinearity （INL） are -0.43 to ＋0.48 LSB and -1.62 to ＋ 1.89 LSB respectively. The prototype ADC consumes 28.4 mW under a 1.2-V nominal power supply and 40 MHz sampling rate, transferring to a figure- of-merit （FOM） of 0.63 pJ per conversion-step.     

Low power high gain gain-controlled LNA and mixer for GNSS receivers Wei Binbin(魏斌斌)1, Jiang Jinguang(江金光)1,2,3*

A low power high gain gain-controlled LNA ＋ mixer for GNSS receivers is reported. The high gain LNA is realized with a current source load. Its gain-controlled ability is achieved using a programmable bias circuit. Taking advantage of the high gain LNA, a high noise figure passive mixer is adopted. With the passive mixer, low power consumption and high voltage gain of the LNA ＋ mixer are achieved. To fully investigate the performance of this circuit, comparisons between a conventional LNA ＋ mixer, a previous low power LNA ＋ mixer, and the proposed LNA ＋ mixer are presented. The circuit is implemented in 0.18 #m mixed-signal CMOS technology. A 3.8 dB noise figure, an overall 45 dB converge gain and a 10 dB controlled gain range of the two stages are measured. The chip occupies 0.24 mm2 and consumes 2 mA current under 1.8 V supply.     

一种应用于GPS接收机的高线性度SiGe HBT低噪声放大器

A high linearity 1.575 GHz SiGe：HBT low noise amplifier （LNA） for global positioning system applications is described. The bipolar cascoded with an MOSFET LNA was fabricated in a commercial 0.18 μm SiGe BiCMOS process, A resistor bias feed circuit with a feedback resistor was designed for the LNA input transistor to improve its intermodulation and compression performance. The packaged chip tested on board has displayed a noise figure of 1. I 1 dB, a power gain of 18 dB, an output 1 dB compression point of ＋7.8 dBm and an input third-order intercept point of ＋1.8 dBm. The chip occupies a 500 × 560μm^2 area and consumes 3.6 mA from a 2.85 V power supply.     

一种应用于GNSS接收机的低噪声和低杂散频率综合器

A low phase noise and low spur phase locked loop （PLL） frequency synthesizer for use in global navigation satellite system （GNSS） receivers is proposed. To get a low spur, the symmetrical structure of the phase frequency detector （PFD） produces four control signals, which can reach the charge pump （CP） simultaneously, and an improved CP is realized to minimize the charge sharing and the charge injection and make the current matched. Additionally, the delay is controllable owing to the programmable PFD, so the dead zone of the CP can be eliminated. The output frequency of the VCO can be adjusted continuously and precisely by using a programmable LC-TANK. The phase noise of the VCO is lowered by using appropriate MOS sizes. The proposed PLL frequency synthesizer is fabricated in a 0.18 μm mixed-signal CMOS process. The measured phase noise at 1 MHz offset from the center frequency is -127.65 dBc/Hz and the reference spur is -73.58 dBc.     

用于U波段移动数字电视的宽带大动态范围高线性度射频前端

A wideband large dynamic range and high linearity U-band RF front-end for mobile DTV is introduced,and includes a noise-cancelling low-noise amplifier(LNA),an RF programmable gain amplifier(RFPGA) and a current communicating passive mixer.The noise/distortion cancelling structure and RC post-distortion compensation are employed to improve the linearity of the LNA.An RFPGA with five stages provides large dynamic range and fine gain resolution.A simple resistor voltage network in the passive mixer decreases the gate bias voltage of the mixing transistor,and optimum linearity and symmetrical mixing is obtained at the same time.The RF front-end is implemented in a 0.25 μm CMOS process.Tests show that it achieves an ⅡP3(third-order intercept point) of –17 dBm,a conversion gain of 39 dB,and a noise figure of 5.8 dB.The RFPGA achieves a dynamic range of –36.2 to 23.5 dB with a resolution of 0.32 dB.     

一种电流复用共栅低噪声放大器的低功耗433/915-MHz射频前端的设计

This paper presents a wideband RF front-end with novel current-reuse wide band low noise amplifier(LNA),current-reuse V –I converter,active double balanced mixer and transimpedance amplifier for short range device(SRD) applications.With the proposed current-reuse LNA,the DC consumption of the front-end reduces considerably while maintaining sufficient performance needed by SRD devices.The RF front-end was fabricated in 0.18 μm RFCMOS process and occupies a silicon area of just 0.11 mm2.Operating in 433 MHz band,the measurement results show the RF front-end achieves a conversion gain of 29.7 dB,a double side band noise figure of 9.7 dB,an input referenced third intercept point of –24.9 dBm with only 1.44 mA power consumption from 1.8 V supply.Compared to other reported front-ends,it has an advantage in power consumption.