改性纳米SiO2/聚氨酯-含氟丙烯酸酯无皂乳液合成及其胶膜性能表征

引言水性聚氨酯相对溶剂型聚氨酯具有不燃、气味小、不污染环境等优点[1-2],从而广泛用于涂料[3]、胶黏剂[4]、油墨[5]等领域。目前,常用于软包装领域的薄膜主要是表面能很低的非极性膜,而水性聚氨酯胶黏剂具有较高的表面自由能,对非极性膜的润湿性差,因此需要降低水性聚氨酯的表面张力,达到润湿非极性膜的目的。     

Inhibited transesterification and enhanced fibrillation of TLCP by nano-SiO2 in polycarbonate matrix

Hybrid composites composed of a thermotropic liquid crystalline polymer (TLCP), nano-SiO₂ and polycarbonate (PC) were prepared by melt blending in a twin-screw extruder. Infrared spectroscopy analysis indicated that the transesterification between PC and TLCP molecules during melt blending was significantly reduced in TLCP/PC blends filled with nano-SiO₂, compared to the unfilled TLCP/PC one. Scanning electron microscopy (SEM) observation showed that better compatibility and finer TLCP dispersion were reached in the unfilled blend, which made the fibrillation of TLCP difficult in capillary flow even at high shear rate. In contrast to this, well-developed TLCP fibrils were formed by capillary flow in nano-SiO₂ filled TLCP/PC blends. By increasing the nano-SiO₂ concentration and shear rate, the fibrillation of TLCP was significantly enhanced. Thermodynamically the interfacial tension between these components and dynamically the viscosity ratio of TLCP to PC were used to investigate the mechanism of nano-SiO₂ in inhibiting the transesterification and enhancing the fibrillation of TLCP droplets in these hybrid composites.     

Effect of nano-SiO2 on the compatibility of PVA/RSF blend

A series of poly(vinyl alcohol) (PVA)/regenerated silk fibroin (RSF)/nano-silicon dioxide (nano-SiO₂) blend films were prepared by solution casting method, in which nano-SiO₂ was obtained via sol?Cgel process. The structure, properties, and morphology of the films related to the compatibility were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). XRD peaks of PVA/RSF/nano-SiO₂ (1.0?wt?%) blends decreased in intensity indicated that formation of PVA and RSF crystal lattices was hindered by nano-SiO₂ particles. FTIR spectroscopy analysis of PVA/RSF/nano-SiO₂ films confirmed that both Si?CO?CC linkage and hydrogen bonding were formed among PVA, RSF, and nano-SiO₂. SEM showed that there was no obvious phase separation in PVA/RSF/nano-SiO₂ (1.0?wt?%) film although small uniform blur particles can still be found. In addition, TEM showed nano-particles were well dispersed through the PVA/RSF polymer matrix. Besides, the observed shift in glass transition temperatures (T _g) and improvement in thermal properties of composite films suggested the enhanced compatibility due to interfacial bonding and intermolecular interactions. Therefore, these results indicated that the compatibility of PVA/RSF was improved effectively by the addition of nano-SiO₂.     

Preparation and rheological behaviors of PA6/SiO2 nanocompiste

The polyamide 6 (PA6)/SiO₂ nanocomposites were prepared by in situ polymerization and the rheological behaviors were investigated. The morphology of resultant materials was characterized by scanning electron microscopy (SEM) and the rheological behaviors were characterized by capillary rheometer. The results showed that the SiO₂ particle size was around 50 nm and the particles dispersed evenly in PA6 matrix. The nanocomposites were pesudoplastic fluids and the apparent viscosities of nanocomposites increased initially and then decreased with the increase in nano-SiO₂ content at the same temperature. The non-Newtonian indexes of nanocomposites were smaller than those of pure PA6. With the increase in nano-SiO₂ content the apparent viscous activation energies of nanocomposites increased initially and then decreased. The rheological behaviors revealed that there were strong interactions between PA6 macromolecule chains and nano-SiO₂ particles.     

Synthesis and self-assembly of miktoarm star copolymers of (polyethylene)2−(polystyrene)2

We report on the synthesis and self-assembly of a novel well-defined miktoarm star copolymer of (polyethylene)₂−(polystyrene)₂, (PE)₂−(PS)₂, with two linear crystalline PE segments and two PS segments as the building blocks based on chain shuttling ethylene polymerization (CSEP), click reaction and atom transfer radical polymerization (ATRP). Initially, alkynyl-terminated PE (PE-) was synthesized via the esterification of pentynoic acid with hydroxyl-terminated PE (PE−OH), which was prepared using CSEP with 2,6-bis[1-(2,6-dimethylphenyl) imino ethyl] pyridine iron (II) dichloride/methylaluminoxane/diethyl zinc and subsequent in situ oxidation with oxygen. (PE)₂−(OH)₂ was then obtained by the click reaction of PE- with diazido and dihydroxyl containing coupling agent. The two hydroxyl groups in (PE)₂−(OH)₂ were then converted into bromisobutyrate by esterification. At last, the (PE)₂−(PS)₂ miktoarm star copolymers were synthesized by ATRP of styrene initiated from (PE)₂−Br₂ macroinitiator. All the intermediates and final products were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behavior was studied by dynamic light scattering (DLS) and atomic force microscopy (AFM). The crystallization of the (PE)₂−(PS)₂ miktoarm star copolymers was studied by differential scanning calorimetry (DSC).     

Structure and performance of a novel TiO2-phosphonate composite photocatalyst

An innovative SiO₂-PO₄³⁻-TiO₂ photocatalyst is presented which is able to bond TiO₂ to Raschig rings (RR). Evidence for the formation on the catalyst surface of PO stretching bands near 1200–1250 cm⁻¹ is presented by FTIR spectroscopy. The TiO₂ Degussa P25 on the catalyst surface (RR) was further characterized by high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction showing that the composite catalyst prepared at 500 °C does not alter the particle size or crystallographic composition of the TiO₂ Degussa P25 particles. The Ti- and P-distribution of the catalyst surface overlayers was obtained by Ar-sputtering eroding up to 100 topmost catalyst layers. By atomic force microscopy (AFM) the root mean square roughness (Rq) or rugosity of 771 nm and an average height of the catalyst layer of 1.52 μm were found on the glass surface. The root mean square roughness Rq varies very little in value before and after the photocatalysis indicating that the sample porosity is conserved during 4-CP photodegradation. The disappearance kinetics of 4-chlorophenol (4-CP) on the SiO₂-PO₄³⁻-TiO₂ composite occurred within 15 min and was faster than the 45 min needed with suspensions of TiO₂ Degussa P25 (1 g L⁻¹). The SiO₂-PO₄³⁻-TiO₂ photocatalyst was able to degrade repetitively 4-CP solutions without loss of activity. The effect of the light intensity, oxidant concentration and 4-CP concentration on the photodegradation kinetics was investigated and is reported in this study.     

Effect of nano-SiO2 particle size on the formation of LLDPE/SiO2 nanocomposite synthesized via the in situ polymerization with metallocene catalyst

Here, we revealed the effect of particle size of the nanoscale SiO₂ on catalytic and characteristic properties of LLDPE/nano-SiO₂ composites synthesized via the in situ polymerization with a zirconocene/MAO catalyst. In the experiment, SiO₂ (10 and 15 nm) was first impregnated with MAO. Then, copolymerization of ethylene/1-hexene was performed in the presence of nano-SiO₂/MAO to produce LLDPE/nano-SiO₂ composites. It was found that the larger particle exhibited higher polymerization activity due to fewer interactions between SiO₂ and MAO. The larger particle also rendered higher insertion of 1-hexene leading to decreased melting temperature (T_m). There was no significant change in the LLDPE molecular structure by means of ¹³C NMR.     

Enhancement of polystyrene composites by hyper-branched polymer-grafted nano-SiO2

Hyper-branched poly(styrene) (HPS) made from copolymerisation of styrene (St) and a branching monomer divinylbenzene (DVB) in the presence of a chain transfer agent n-dodecanethiol (C₁₂SH) was grafted onto the surface of nano-SiO₂ via emulsion polymerisation (donated as HPS-SiO₂). A series of PS/HPS-SiO₂ composites were obtained by the addition of prepared HPS-SiO₂ into the pure PS. The structures and properties of the product were characterised by Fourier-transform infrared spectra (FT-IR), differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical analysis (DMA). The results showed a strong interface interaction between HPS and nano-SiO₂ indicating that the HPS has grafted onto the surface of nano-SiO₂. The storage modulus, Young’s modulus, glass transition temperature (T_g) and thermal decomposition temperature of the composite were increased apparently by loading an appropriate amount of HPS-grafted SiO_2.     

Ionic liquid mediated synthesis of silica/polystyrene core–shell composite nanospheres by radical dispersion polymerization

This report describes the novel preparation of silica/polystyrene (SiO₂/PS) core–shell composite nanospheres by in situ radical dispersion polymerization in an ionic liquid (IL). Silica nanoparticles were first surface modified by the silane coupling agent methacryloxypropyltrimethoxysilane (MPTMS), which is capable of copolymerizing with styrene and provided a reactive CC bond. Transmission electron microscopy (TEM) revealed core–shell morphology with smooth surfaces. X-ray photoelectron spectroscopy (XPS) analysis demonstrated that almost all of the SiO₂ nanoparticles were encapsulated by the polymer. The composite particles were also analyzed by FT-IR spectroscopy and thermogravimetric analysis (TGA). In principle, this simple and environmentally-friendly synthetic procedure can be employed to prepare other inorganic oxide-containing polymer composites.     

The synthesis and characterization of polystyrene/magnetic polyhedral oligomeric silsesquioxane (POSS) nanocomposites

Fc-CHCH-C₆H₆-(C₅H₉)₇Si₈O₁₂ (POSS1, Fc: ferrocene) which contain both metal and CC double bond was firstly synthesized by Wittig reaction. The chemical structure of POSS1 was characterized by FTIR, ¹H, ¹³C and ²⁹Si NMR, mass spectrometry and elemental analysis, and the magnetic property of POSS1 have also been studied. Polystyrene composites containing inorganic-organic hybrid polyhedral oligomeric silsesquioxane (POSS1) were prepared by bulk free radical polymerization. XRD and TEM studies indicate that POSS1 is completely dispersed at molecular level in PS matrix when 1 wt% POSS1 is introduced, while some POSS1-rich nanoparticals are present when content of POSS1 is beyond 3 wt%. GPC results show that molecular weight of the PS/POSS1 nanocomposites are increased with addition of POSS1. TGA and TMA data show the thermal stabilities of PS/POSS1 nanocomposites have been improved compared to neat PS. The PS/POSS1 nanocomposites also display higher glass transition temperatures (T_g) in comparison with neat PS. Viscoelastic properties of PS/POSS1 nanocomposites were investigated by DMTA. The results show the storage modulus (E′) values (temperature>T_g) and the loss factor peak values of the PS/POSS1 nanocomposites are higher than that of neat PS. Mechanical properties of the PS/POSS1 nanocomposites are improved compared to the neat PS.     

HDS of benzothiophene and dihydrobenzothiophene over sulfided Mo/γ-Al2O3

The hydrodesulfurization (HDS) of benzothiophene (BT) and dihydrobenzothiophene (DHBT) was studied over a sulfided Mo/γ-Al₂O₃ catalyst at 5 MPa and 280 and 300 °C. In the absence of H₂S, benzothiophene reacted by hydrogenation to dihydrobenzothiophene and by hydrogenolysis to ethylbenzene (EB), and dihydrobenzothiophene reacted by hydrogenolysis to ethylbenzene. H₂S inhibited both hydrogenation and hydrogenolysis, but the latter much more strongly. The reverse inhibition was observed for 2-methylpiperidine (MPi). In the presence of H₂S and/or 2-methylpiperidine, dihydrobenzothiophene reacted to ethylbenzene as well as by total hydrogenation to octahydrobenzothiophene, and on to ethylcyclohexenes and ethylcyclohexane. Dihydrobenzothiophene did not react back to benzothiophene at and below 300 °C, while the equivalent tetrahydrodibenzothiophene reacted fast to an equilibrium with tetrahydrodibenzothiophene, due to stabilization of the vinylic bond by the alkyl groups. The observed products and kinetic results were explained by a model in which the CS bonds were mainly broken by hydrogenolysis.     

Particle size effect of Li[Ni0.5Mn0.5]O2 prepared by co-precipitation

Spherical (Ni_0.5Mn_0.5)(OH)₂ with different secondary particle size (3 μm, 10 μm in diameter) was synthesized by co-precipitation method. Mixture of the prepared hydroxide and lithium hydroxide was calcined at 950 °C for 20 h in air. X-ray diffraction patterns revealed that the prepared material had a typical layered structure with space group. Spherical morphologies with mono-dispersed powders were observed by scanning electron microscopy. It was found that the layered Li[Ni_0.5Mn_0.5]O₂ delivered an initial discharge capacity of 148 mAh g⁻¹ (3.0-4.3 V) though the particle sizes were different. Li[Ni_0.5Mn_0.5]O₂ having smaller particle size (3 μm) showed improved area specific impedance due to the reduced Li⁺ diffusion path, compared with that of Li[Ni_0.5Mn_0.5]O₂ possessing larger particle size (10 μm). Although the Li[Ni_0.5Mn_0.5]O₂ (3 μm) was electrochemically delithiated to Li_0.39[Ni_0.5Mn_0.5]O₂, the resulting exothermic onset temperature was around 295 °C, of which the value is significantly higher than that of highly delithiated Li_1−δCoO₂ (∼180 °C).     

核壳型纳米SiO2/含氟聚丙烯酸酯复合乳液的合成与表征

采用原位乳液聚合法,在可聚合阴离子乳化剂/非离子乳化剂复配体系下,以γ-甲基丙烯酰氧丙基三甲氧基硅烷(KH-570)改性的纳米SiO2、甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸(AA)等为核相组成,以MMA、BA及甲基丙烯酸十二氟庚酯(DFMA)为壳相单体,合成纳米SiO2/含氟聚丙烯酸酯复合乳液.考察了纳...     

Electrochemically reduced titanocene dichloride as a catalyst of reductive dehalogenation of organic halides

We have studied a reaction between the reduced form of titanocene dichloride (Cp₂TiCl₂) and a group of organic halides: benzyl derivatives (4-XC₆H₄CH₂Cl, X = H, NO₂, CH₃; 4-XC₆H₄CH₂Br, X = H, NO₂, PhC(O); 4-XC₆H₄CH₂SCN, X = H, NO₂) as well as three aryl halides (4-NO₂C₆H₄Hal, Hal = Cl, Br; 4-CH₃O-C₆H₄Cl). It has been shown that the electrochemical reduction of Cp₂TiCl₂ in the presence of these benzyl halides leads to a catalytic cycle resulting in the reductive dehalogenation of these organic substrates to yield mostly corresponding toluene derivatives as the main product. No dehalogenation has been observed for aryl derivatives. Based on electrochemical data and digital simulation, possible schemes of the catalytic process have been outlined. For non-substituted benzyl halides halogen atom abstraction is a key step. For the reaction of nitrobenzyl halides the complexation of Ti(III) species with the nitro group takes place, with the electron transfer from Ti(III) to this group (owing to its highest coefficient in LUMO of the nitro benzyl halide) followed by an intramolecular dissociative electron redistribution in the course of the heterolytic CHal bond cleavage.The results for reduced titanocene dichloride centers immobilized inside a polymer film showed that the catalytic reductive dehalogenation of the p-nitrobenzyl chloride does occur but with a low efficiency because of the partial deactivation of the film due to the blocking of the electron charge transport between the electrode and catalytic centers.     

Kinetics-controlled compatibilization of immiscible polypropylene/polystyrene blends using nano-SiO2 particles

Rigid inorganic filler has been long time used as a reinforcement agent for polymer materials. Recently, more work is focused on the possibility that using filler as a compatibilizer for immiscible polymer blends. In this article, we reported our efforts on the change of phase morphology and properties of immiscible polypropylene(PP)/polystyrene(PS) blends compatibilized with nano-SiO₂ particles. The effects of filler content and mixing time on the phase morphology, crystallization behavior, rheology, and mechanical properties were investigated by SEM, DSC, ARES and mechanical test. A drastic reduction of PS phase size and a very homogeneous size distribution were observed by introducing nano-SiO₂ particles in the blends at short mixing time. However, at longer mixing time an increase of PS size was seen again, indicating a kinetics-controlled compatibilization. This conclusion was further supported by the unchanged glass transition temperature of PS and by increased viscosity in the blends after adding nano-SiO₂ particles. The compatibilization mechanism of nano-SiO₂ particles in PP/PS blends was proposed based on kinetics consideration.     

The role of particle size on the electrochemical properties at 25 and at 55 °C of the LiCr0.2Ni0.4Mn1.4O4 spinel as 5 V-cathode materials for lithium-ion batteries

The role of the particle size on the electrochemical properties at 25 and at 55 °C of the LiCr_0.2Ni_0.4Mn_1.4O₄ spinel synthesized by combustion method has been determined. Samples with different particle size were obtained by heating the raw spinel from 700 to 1100 °C, for 1 h in air. X-ray diffraction patterns revealed that all the prepared materials are single-phase spinels. The main effect of the thermal treatment is the remarkable increase of the particles size from 60 to 3000 nm as determined by transmission electron microscopy. The electrochemical properties were determined at high discharge currents (1C rate) in two-electrode Li-cells. At 25 and at 55 °C, in spite of the great differences in particle size, the discharge capacity drained by all samples is similar (Q_dch ≈ 135 mAh g⁻¹). Instead, the cycling performances strongly change with the particle size. The spinels with Φ > 500 nm show better cycling stability at 25 and at 55 °C than those with Φ < 500 nm. The samples heated at 1000 and 1100 °C, with high potential (E ≈ 4.7 V), elevate capacity (Q ≈ 135 mAh g⁻¹), and remarkable cycling performances (capacity retention after 250 cycles >96%) are very attractive materials as 5V-cathodes for high-energy Li-ion batteries.     

Synthesis of TiO2/PAA nanocomposite by RAFT polymerization

Due to the strong tendency of nanoparticles such as metal oxides to agglomerate, homogeneous dispersion of these materials in a polymeric matrix is extremely challenging. In order to overcome this problem and to enhance the filler-polymer interaction, this study focused on living polymerization that was initialized from the surface of titania nanofillers. A new method for synthesizing TiO₂/polymer nanocomposites was found with a good dispersion of the nanofillers by using the bifunctional RAFT agent, 2-{[(butylsulfanyl)carbonothioyl]sulfanyl}propanoic acid). This RAFT agent has an available carboxyl group to anchor onto TiO₂ nanoparticles, and an SC(SC₄H₉) moiety for subsequent RAFT polymerization of acrylic acid (AA) to form n-TiO₂/PAA nanocomposites. The functionalization of n-TiO₂ was determined by FTIR and partitioning studies, the livingness of the polymerization was verified using GPC and NMR, while the dispersion of the inorganic filler in the polymer was studied using electron microscopy, FTIR and thermal analysis.