共查询到20条相似文献,搜索用时 531 毫秒
1.
《机械制造与自动化》2016,(1):54-57
以常用铜弹带材料属性研究和本构关系为基础,研究了在某大口径火炮中弹带材料对挤进过程的影响规律。使用有限元软件ABAQUAS建立弹带挤进系统模型,采用Johnson-Cook本构模型描述材料的接触失效,利用显示数值积分算法对弹带挤进过程的非线性动力学行为进行了数值模拟,分别对4种不同的铜弹带材料进行了数值计算。经过4种结果的对比分析,得到了铜材性质对挤进过程影响的机理,并提出了新型塑性弹带材料的研究方向。研究结果可为大口径火炮弹带材料的优化和研究提供一定的参考。 相似文献
2.
对火炮的发射状态进行分析,并通过机械与液压相结合的方式设计了弹丸高速挤进弹带模拟试验装置,用于研究火炮发射时弹丸在身管的运动状态,以及弹丸高速挤进弹带的挤进动力、阻力和变形。对这一试验装置的原理进行了论述,并对其机械结构与液压系统进行了介绍。 相似文献
3.
基于ANSYS/LS-DYNA瞬态动力学分析软件,建立了某火炮挤进过程的有限元模型,重点研究挤进过程中挤进阻力随挤进行程的变化。通过输出关键时刻的图形,展示了整个挤进过程中弹带的变形规律,然后通过分析模型中某些单元的应力曲线,对膛线起始部的磨损提出了看法。利用仿真获得的加速度曲线和速度曲线,基于达朗贝尔原理,利用matlab对数据进行处理,得到了挤进阻力曲线,并与理论所得阻力曲线进行了对比,表明ANSYS/LS-DYNA是研究挤进过程的一个很好的工具。 相似文献
4.
5.
6.
装甲火炮在射击过程中高温火药燃气及弹带摩擦的热作用对火炮身管造成了较严重的热影响,如身管内膛烧蚀磨损、身管热应力、身管热弯曲等,热作用的存在不仅影响炮弹的初速、射程、精度等丧失,而且还严重阻止了火炮性能的发挥,因此必须准确地测量炮膛内的温度,从而采取有效的降温措施.基于此文章从传热学的角度对炮膛内的温度分布进行了研究,并应用当今成熟的薄膜热电偶传感器技术、单片机技术,数据采集处理等技术对火炮发射时身管某层面内的瞬态温度进行测量,并由基于外推法编制的软件推算出膛内的温度.实验数据表明该温度是作为降低膛温的有利依据. 相似文献
7.
8.
为简化计算,目前火炮炮膛合力计算时假定药室和坡膛内压强与膛底压强相同,这种简化必然存在误差。以某型火炮为对象,考虑药室和坡膛内膛压的曲线分布特性,用数值仿真方法研究了简化炮膛合力的误差以及由此引出的火炮后坐参数的计算误差。研究表明,采用简化计算方法,某型火炮的炮膛合力最大值减小5.2%,后坐长度减小7.9%,后坐最大速度减小5.4%,后坐阻力最大值减小10.9%;通过系数修正,上述参数的变化可控制在0.5%以内。研究为火炮精细化设计和保障提供了参考。 相似文献
9.
为探究火炮身管膛线不同磨损状态下弹带挤进过程中的受力及动态响应情况,基于Johnson-Cook本构关系模型建立了不同磨损状态下的身管模型,并利用有限元显式分析求解了弹炮耦合模型,得到了不同身管磨损状态下弹带受力及弹丸运动响应结果,包括挤进过程弹体速度、加速度、法向位移等运动曲线。由仿真结果可以看出:膛线不均匀磨损会导致弹丸在挤进过程中产生较大的径向位移和振动,烧蚀产生的烧蚀坑及裂缝会加剧这一现象;但轴向速度、位移变化平滑,加速度受弹底压力影响较大。 相似文献
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.