共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
从乘用车制动器台架试验惯量的计算方法、热电偶安装位置、试验项目、试验参数对中美日乘用车制动器台架标准进行了对比分析,进一步了解中美日乘用车制动器台架试验标准的要求和侧重点,为乘用车制动器设计、台架试验及标准制修订提供参考。 相似文献
4.
5.
某乘用车副车架在台架试验过程中出现早期开裂失效,根据该台架试验对应的副车架工况确定边界条件进行有限元静力分析,得到危险工况下的应力分布情况。通过电测试验验证有限元分析结果。根据有限元计算结果分析开裂原因,并提出对策。对改进后的副车架进行的台架试验证实,改进后开裂问题得到解决。 相似文献
6.
针对主减速器总成NVH问题,分析了主减速器总成NVH的影响因素。利用CAE仿真的方法对影响主减速器总成啸叫因素进行了分析,确保主减速器总成符合设计要求。本文对主减速器总成减壳、差壳、主被齿轴承刚度、主齿轴承垫片、隔套进行了优化分析使得主被齿错位量达到设计要求,使主减总成NVH问题得到了较大改善。 相似文献
7.
8.
9.
10.
汽车驱动桥由差速器、减速器、桥壳、半轴、制动器及轮毂组成,它们之间有着严格而精密的配合关系,如在出厂前不进行台架试验检测,就很容易让一些不合格产品流出公司,进入主机厂及市场。驱动桥常见故障有:正反转噪声超差、正反转点响、齿轮早期磨损;油封漏油、主减速器与桥壳结合面密封不严导致漏油、焊缝漏油、砂孔漏油;轴承异响、差速失灵、停车异响及制动器品质低等。 相似文献
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
15.
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献