共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
4.
传统砂轮磨削性能的滞后性已经远不能满足当前的需求,提高砂轮磨削性能显得异常迫切。因此,把生物学中叶序理论引入到CBN电镀砂轮磨粒有序化排布中来,以改善砂轮的磨削性能。研究不同的叶序参数对磨粒有序化排布的影响。为保证工件表面能够获得较低的表面粗糙度,对磨粒之间的干涉做了一定的探讨。通过模拟仿真发现:选取合理的叶序参数可使磨粒之间能够保持很好的干涉率,与磨粒交错排布砂轮相比能够得到较低的表面粗糙度。叶序排布作为一种特殊的有序化排布为砂轮磨削性能的提高提供了很好的理论依据。 相似文献
5.
为改善电镀CBN砂轮的磨削性能,利用叶序理论对磨粒排布进行设计.探讨叶序参数对磨粒间距及排布的影响,并建立相关表面粗糙度数学模型,模拟仿真叶序参数对于表面粗糙度的影响趋势.仿真结果表明,采用合理的叶序排布参数能获得较其它排布方式较小的表面粗糙度值,这为砂轮表面磨粒的有序化排布设计提供了理论依据. 相似文献
6.
7.
8.
9.
为了探索筋条表面磨削过程中,磨粒叶序有序化砂轮的磨削力对工件表面几何形貌的影响规律,首先,根据筋条减阻表面的特征参数,设计能够实现筋条减阻表面加工的磨粒叶序排布砂轮;其次,建立筋条减阻表面磨削过程的简化模型,对工件表面形貌进行力学仿真;最后,研究磨削速度、磨削深度、磨粒角度、排布参数等对筋条表面几何形状的影响规律。结果表明,磨削速度增大时,工件表面材料的隆起变形高度随磨削力的减小而增大;磨削深度增大时,材料的隆起变形高度随磨削力的增大而减小;磨粒角度增大时,材料隆起变形高度随磨削力的增大,先增大后减小;而在叶序系数增大过程中,材料隆起变形高度随磨削力的增大而增大。 相似文献
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献