最小元件的多输入单输出n阶电流模式滤波器

提出了一种基于MOCCⅡ的最小元件n阶多输入单输出电流模式滤波器电路.该电路仅由n个有源器件、n个电容及n个电阻组成,不需改变电路内部结构及器件数目,只需调整外部输入电流信号的接入数目和方式便可实现n阶低通、带通、高通、带阻及全通电流模式滤波,便于单片集成.面向实际电路,完成了PSpice仿真,结果表明所提出的电路方案正确有效.     

基于MOCCII多输入单输出n阶电流模式滤波器

提出了一种结构简单的基于MOCCⅡ n阶多输入单输出电流模式滤波器电路。该滤波器电路包含，n 1个有源器件、n个电容及，n 2个电阻，可以产生n阶低通、带通、高通、带阻电流模式滤波器。由于仅依靠改变外部输入电流信号的接入数目和方式来实现不同功能的滤波器，而电路内部结构及器件数目不变，所以该电路便于单片集成。文中对滤波器进行了PSPICE模拟。     

用信号流图设计任意阶FTFN-RC通用滤波器

该文提出采用信号流图实现任意阶FTFN-RC通用滤波器的方法。通过对网络函数的直接分析,导出了任意阶传输函数的FTFN-RC实现电路。该滤波电路仅包含n个有源器件,n个接地电容和n个接地电阻,可以实现n阶低通、带通、高通电流模式滤波。不必改变电路内部结构就可以同时在不同的输出端实现不同的滤波功能,简化了电路结构,便于集成。完成了MOS级的PSPICE仿真,仿真结果表明了所提出电路的可行性。     

电流模式n阶CCCⅡ-C的多输入单输出滤波器设计

该文提出了一种结构简单的基于MCCCⅡ的n阶多输入单输出电流模式滤波器电路.该滤波器电路包含n个有源器件、n个接地电容元件,无需接任何电阻元件,可以产生n阶低通、带通、高通、带阻及全通电流模式滤波.由于仅依靠改变外部输入电流信号的接入数目和方式来实现不同功能的滤波器,而电路内部结构及器件数目不变,所以该电路便于单片集成.文中对滤波器进行了PSPICE模拟.     

基于MOCCⅡ多功能滤波器的设计

本文简要介绍了Mulitple-output CCⅡ（简称MOCCⅡ）器件的电路特性，提出了一个新颖的基于MOCCⅡ多功能滤波器的电路。该电路可同时实现一阶低通以及二阶低通、高通、带阻、全通和带通等输出。经分析，该电路具有很低的灵敏度。电路中所有RC元件均接地，便于集成等优点。     

最小元件的多输入单输出门阶电流模式滤波器

提出了一种基于MOCCII的最小元件n阶多输入单输出电流模式滤波器电路。该电路仅由n个有源器件、n个电容及n个电阻组成，不需改变电路内部结构及器件数目，只需调整外部输入电流信号的接入数目和方式便可实现n阶低通、带通、高通、带阻及全通电流模式滤波，便于单片集成。面向实际电路，完成TPSpice仿真，结果表明所提出的电路方案正确有效。     

基于MOCCⅡ多功能二阶电流模式滤波器设计

文中提出了一种基于MOCCⅡ(多端输出第二代电流传输器)的单输入三输出二阶滤波器电路模型,由该模型可得出几种不同的滤波器电路,每种滤波器电路都由四个MOCCⅡ、两个接地电容和电阻组成.不但能同时实现二阶高通滤波、低通滤波和带通滤波功能,还可以通过对输出端的直接组合,实现带阻和全通滤波功能及其他任意形式的二阶信号传输功能.滤波器的角频率和品质因数独立可调,应用非常灵活.与同类滤波电路相比较,该电路不但结构简单,而且使用灵活,有利于集成.同时,对其中一种滤波器的滤波特性进行了测试,实验结果表明,滤波器的滤波性能良好,电路模型完全正确.     

电流模式n阶CCCII-C的多输入单输出滤波器设计

该文提出了一种结构简单的基于MCCCII的n阶多输入单输出电流模式滤波器电路。该滤波器电路包含n个有源器件、n个接地电容元件,无需接任何电阻元件,可以产生n阶低通、带通、高通、带阻及全通电流模式滤波。由于仅依靠改变外部输入电流信号的接入数目和方式来实现不同功能的滤波器,而电路内部结构及器件数目不变,所以该电路便于单片集成。文中对滤波器进行了PSPICE模拟。     

电流模式n阶CCCII-C的多输入单输出滤波器设计

该文提出了一种结构简单的基于MCCCII的n阶多输入单输出电流模式滤波器电路。该滤波器电路包含n个有源器件、n个接地电容元件,无需接任何电阻元件,可以产生n阶低通、带通、高通、带阻及全通电流模式滤波。由于仅依靠改变外部输入电流信号的接入数目和方式来实现不同功能的滤波器,而电路内部结构及器件数目不变,所以该电路便于单片集成。文中对滤波器进行了PSPICE模拟。     

最少元件的多输入多输出MOCCII电流模式滤波器

本文提出了两种基于MOCCⅡ（多端输出的第二代电流传输器）的多输入多输出的电流模式滤波器。两种电路均由2个MOCCⅡ及4个接地RC元件构成。每一种电路除了实现出单输出的低通、带通、高通、带组、全通电流模式滤波器外，还能实现三种不同类型的具有同时多输出的电流模式滤波器，提出的电路具有很低的无源灵敏度；同时应用基本电流镜技术实现出结构简单的高精度CMOS MOCCⅡ，并对MOCCⅡ及提出的滤流器电路进行了PSICE仿真。     

Electronically controlled high input and low output impedance voltage mode multifunction filter with grounded capacitors

In this study, a three-input single-output voltage-mode biquadratic filter employing voltage differencing differential input buffered amplifier (VD-DIBA) is presented. The proposed filter uses two VD-DIBAs and two grounded capacitors without any external resistors, which is well suited for integrated circuit implementation. The circuit provides five standard transfer functions, namely, low pass, high pass, band pass, notch and all pass filters with electronic control of quality factor and pole frequency. Each transfer function can be selected by suitably selecting input signals via digital method. The filter does not require inverting of the input voltage signal. Moreover, the circuit possesses high input and low output impedances and thus it enables simple voltage-mode cascading. The PSPICE simulation and also experimental results are included, verifying the workability of the proposed filter. The given results agree well with the theoretical anticipation.     

基于OTA的高频连续时间滤波器

介绍了基于OTA的高频连续时间低通滤波器电路,滤波器截止频率可高至15MHz,三阶谐波失真小于60dB。该滤波器电路由OTA转换器和电阻、电容组成。其中,设计高性能OTA转换器是电路的关键。     

基于OTRA的通用双二阶滤波器设计

提出了把通用双二阶滤波器视为负反馈放大器的观点,根据反馈电路的基本方程,利用3个MOS电阻、2个电容、2个运算跨阻放大器(OTRA)构成了通用双二阶滤波器,该滤波器不仅可从同一端口输出信号,从不同端口输入信号,而且可获得低通、高通、带通、带阻和全通输出.该电路结构简单,便于电控调谐.     

High output impedance current-mode universal biquadratic filters with five inputs using multi-output CCIIs

Three current-mode universal biquadratic filters each with five input terminals and one output terminal are presented. The first proposed circuit uses three multi-output second-generation current conveyors, two grounded capacitors and three resistors. This circuit offers the following advantageous features: orthogonal controllability of resonance angular frequency and quality factor, high output impedance, the versatility to synthesize all standard filter types without component matching condition and using grounded capacitors. The second proposed circuit uses three multi-output second-generation current conveyors, two grounded capacitors and two resistors. This circuit offers the following advantageous features: using minimum passive components, high output impedance, the versatility to synthesize all standard filter types without component matching condition and using grounded capacitors. The third proposed circuit uses three multi-output second-generation current conveyors, two grounded capacitors and three grounded resistors. This circuit offers the following advantageous features: the versatility to synthesize all standard filter types, high output impedance and using only grounded passive components. Each of the proposed circuits can get five kinds of filter functions by using only one current input signal.     

Universal current-mode biquad filter using dual output current differencing transconductance amplifier

A new universal current-mode biquad filter using current differencing transconductance amplifier (CDTA) is proposed. The proposed configuration can realize the second-order low pass, high pass, band pass, and band reject responses simultaneously. The circuit employs both grounded capacitors (ideal for integrated circuit implementation), and offers low active and passive sensitivities. The workability of the proposed configuration has been verified using SPICE simulation.     

High Input Impedance Voltage-Mode Universal Biquadratic Filter with Three Inputs Using DDCCs

A new high input impedance voltage-mode universal biquadratic filter with three input terminals and five output terminals is presented. The proposed circuit uses three plus-type differential difference current conveyors, two grounded resistors and two grounded capacitors. The proposed circuit can realize all the standard filter functions: lowpass, bandpass, highpass, notch and allpass, without component matching conditions. The proposed circuit offers the features of high input impedance, low active and passive sensitivities and the use of only grounded resistors and capacitors.     

基于开关电容技术的磁通门选频放大电路研究

传统磁通门信号处理电路中的选频放大电路由运放和电阻电容网络构成的多环反馈型带通滤波器组成,具有电路结构简单、可靠性高、成本低等特点.但电路中电阻、电容的值较大,不易集成.基于将磁通门传感器微型化的目的,在已有Hspice磁通门探头信号产生模型的基础上,提出一种由双2阶模块级联的开关电容带通滤波器实现选频放大功能的方法,...     

电流模式n阶CCCII多功能滤波器的设计

用信号流图的方法设计了一种电流模式n阶CCCII多功能滤波器。通过选择不同的输入端口,可分别实现n阶低通、高通和带通滤波功能。该滤波器不仅电路结构简单,而且使用的元器件很少,所有的电容均接地,便于集成,且与VL-SI工艺兼容,PSpice仿真结果进一步证明了理论分析的正确性。     

Third-order voltage-mode active-C band pass filter

In this research article, a new third-order voltage-mode active-C asymmetrical band pass filter is proposed. It uses three numbers of current-controlled current conveyors and three numbers of equal-valued capacitors. The topology has the following important features: uses only three active elements, uses three capacitors, uses all grounded capacitors and no resistor is suitable for integrated circuit design, there is no matching constraint, high input impedance, low output impedance, central frequency can easily be electronically controlled by bias current, and frequency response is asymmetrical in nature. The application of the proposed topology in the realisation of a voltage-mode sixth-order symmetrical band pass filter has been demonstrated. The workability of the proposed topology and sixth-order filter has been confirmed by simulation results using 0.35-µm Austria Micro Systems complementary metal oxide semiconductor technology.     

Nth order current mode universal filter using MOCCCIIs

This article presents a new current mode single-input-multiple-output nth order universal filter. The proposed circuit employs (n + 1) number multiple output second generation current conveyors and n number grounded capacitors only. Presented circuits can realize current mode low pass, high pass, band pass, notch and all pass responses simultaneously at different high output impedance terminals. The current mode filter circuit provides low input impedance by selecting the proper value of bias current and also has high output impedance, which is suitable for cascading. The circuit offers some important features such as resistor less realization, no passive component matching constraints, low sensitivity, electronic tunability and active-C realization. The functionality of the proposed filter circuit is tested with the PSPICE simulation, which is found to agree well with the proposed theory.