Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan and chondroitin sulfate composite scaffolds

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained much interest in recent years. In this article, the development of a polysaccharide‐based artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of chondroitin sulfate (ChS) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The ChS–Chito composite AECMs were crosslinked with glutaraldehyde and calcium ions (Ca²⁺) and cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined with Fourier transform infrared analysis. Glutaraldehyde and Ca²⁺ crosslinked with Chito and ChS, respectively, to produce different types of ChS–Chito semi‐interpenetrated networks. In contrast, EDC/NHS crosslinked with both Chito and ChS to produce ChS–Chito connected networks. In physiological buffer solutions, the Ca²⁺‐crosslinked ChS–Chito composite AECMs showed a lower swelling ratio than their EDC/NHS‐ and glutaraldehyde‐crosslinked counterparts. The ChS–Chito composite AECMs showed excellent antibacterial capability and biocompatibility according to the results of the in vitro antibacterial test and cytotoxic assay. This result suggested that the ChS–Chito composite AECMs might be a potential biomaterial for scaffold‐guided tissue‐engineering applications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Stabilizing effect of carbodiimide and dehydrothermal treatment crosslinking on the properties of collagen/hydroxyapatite scaffolds

This paper reports the effect of the combined technique of dehydrothermal treatment (DHT) and a mixture of 1‐ethyl‐3(3‐dimethylaminopropyl) carbodiimide (EDC) and N‐hydroxysuccinimide (NHS) crosslinking on the physicochemical properties of collagen/hydroxyapatite materials. Collagen and collagen/hydroxyapatite porous scaffolds containing different amounts of collagen and hydroxyapatite were prepared with use of the freeze‐drying technique. All samples were capable of absorbing a large quantity of phosphate buffered saline. Samples crosslinked by DHT+EDC/NHS presented higher resistance to collagenase degradation (with slightly reduced degradation in DHT+EDC/NHS crosslinked scaffolds prepared from 2% collagen solution), whereas DHT scaffolds exhibited faster degradation. Mechanical testing results suggested that scaffolds crosslinked by DHT+EDC/NHS treatment have an improved compressive modulus compared with EDC/NHS crosslinking. The qualitative analysis of colour intensity resulting from the CellTiter 96 Aqueous One Solution Cell Proliferation Assay (MTS) led to the conclusion that all samples, regardless of the crosslinking method, were well tolerated by cells. However, DHT and EDC/NHS crosslinked scaffolds seem to support better cell viability, in contrast to DHT+EDC/NHS crosslinked scaffolds that support cell differentiation instead. DHT+EDC/NHS crosslinked scaffolds markedly increase the specific alkaline phosphatase activity of cells, which may be of benefit in bone tissue engineering. © 2017 Society of Chemical Industry     

Development and Characterization of Novel Biomimetic Composite Scaffolds Based on Bioglass‐Collagen‐Hyaluronic Acid‐Phosphatidylserine for Tissue Engineering Applications

Summary: Biomimetic scaffolds are appealing products for the repair of bone defects using tissue engineering strategies. The present study prepared novel biomimetic composite scaffolds with similar composite to natural bone using bioactive glass, collagen, hyaluronic acid, and phosphatidylserine. The microstructure, swelling ratio, biodegradability, and biomineralization characteristic of the composite scaffolds with and without hyaluronic acid and phosphatidylserine were compared and analyzed by SEM/EDAX, XRD, and FTIR techniques and in vitro test, and the properties can be influenced by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide (EDC)/N‐hydroxysuccinimide (NHS) crosslinking. The optimized properties of the crosslinked composite scaffolds observed in this study show the possibility of their use of bioactive and bioresorbable scaffolds in bone tissue engineering.

SEM micrographs of BG‐COL‐HYA‐PS composite scaffolds after immersion in SBF for 1 d.     

Preparation and cell compatibility evaluation of chitosan/collagen composite scaffolds using amino acids as crosslinking bridges

In this study, a novel freeze‐gelation method instead of the conventional freeze‐drying method was used to fabricate porous chitosan/collagen‐based composite scaffolds for skin‐related tissue engineering applications. To improve the performance of chitosan/collagen composite scaffolds, we added 1‐ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide (EDC) and amino acids (including alanine, glycine, and glutamic acid) in the fabrication procedure of the composite scaffolds, in which amino acid molecules act as crosslinking bridges to enhance the EDC‐mediated crosslinking. This novel combination enhanced the tensile strength of the scaffolds from 0.70 N/g for uncrosslinked scaffolds to 2.2 N/g for crosslinked ones; the crosslinked scaffolds also exhibited slower degradation rates. The hydrophilicity of the scaffolds was also significantly enhanced by the addition of amino acids to the scaffolds. Cell compatibility was demonstrated by the in vitro culture of human skin fibroblasts on the scaffolds. The fibroblasts attached and proliferated well on the chitosan/collagen composite scaffolds, especially the one with glutamic acid molecules as crosslinking bridges, whereas cells did not grow on the chitosan scaffolds. Our results suggest that the collagen‐modified chitosan scaffolds with glutamic acid molecules as crosslinking bridges are very promising biomaterials for skin‐related tissue engineering applications because of their enhanced tensile strength and improved cell compatibility with skin fibroblasts. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation,characterization, antibacterial properties,and hemostatic evaluation of ibuprofen‐loaded chitosan/gelatin composite films

Ibuprofen‐loaded chitosan/gelatin (CS/GE) composite films were fabricated in this work. The morphology of the composite film was investigated using scanning electron microscopy. The functional groups of the composite film before and after crosslinking were characterized using Fourier transform infrared spectroscopy. Meanwhile, the mechanical properties, antibacterial performance, cytocompatibility, and hemostatic activity of the composite films were investigated. The results show that the amount of CS affected the mechanical properties and liquid uptake capacities of the composite films. The composite film showed better bactericidal activity against Staphylococcus aureus than Escherichia coli. In vitro drug‐release evaluations showed that crosslinking could control the drug‐release rate and period in wound healing. Both types of CS/GE and drug‐loaded CS/GE composite films also showed excellent cytocompatibility in cytotoxicity assays. The hemostatic evaluation indicated that the composite film crosslinked by glutaraldehyde in rabbit livers had a dramatic hemostatic efficacy. Therefore, ibuprofen‐loaded CS/GE composite films are potentially applicable as a wound dressing material. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45441.     

Fabrication and characterization of natural origin chitosan‐ gelatin‐alginate composite scaffold by foaming method without using surfactant

A natural origin tripolymer scaffold from chitosan, gelatin, and alginate was fabricated by applying foaming method without adding any foam stabilizing surfactant. Previously, in foaming method of scaffold fabrication, toxic surfactants were used to stabilize the foam, but in this work, the use of surfactant has been avoided strictly, which can provide better environment for cellular response and viability. In foaming method, stable foam is produced simply by agitating the polymer (alginate‐gelatin) solution, and the foam is crosslinked with CaCl₂, glutaraldehyde, and chitosan to produce tripolymer alginate‐gelatin‐chitosan composite scaffold. Microscopic images of the composite scaffold revealed the presence of interconnected pores, mostly spread over the entire surface of the scaffold. The scaffold has a porosity of 90% with a mean pore size of 57 μm. Swelling and degradation studies of the scaffold showed that the scaffold possesses excellent properties of hydrophilicity and biodegradability. In vitro cell culture studies by seeding L929 mouse fibroblast cells on scaffold revealed excellent cell viability, proliferation rate and adhesion as indicated by MTT assay, DNA quantification, and phase contrast microscopy of cell‐scaffold construct. The natural origin composite scaffold fabricated by the simplest method i.e., foaming method, but without adding any surfactant, is cheap, biocompatible, and it might find potential applications in the field of tissue engineering. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

An investigation of the flocculation characteristics of polyacrylamide‐grafted chitosan

To investigate the flocculation characteristics of polyacrylamide (PAM)‐grafted chitosan, a series of PAM‐grafted chitosan copolymer (Chito‐g‐PAM1 to Chito‐g‐PAM4) have been synthesized by ceric ammonium nitrate‐induced solution polymerization technique in nitrogen atmosphere. The flocculation characteristics of the polymer samples (PAM, grafted and ungrafted chitosan) were studied by settling test and jar test methods in the colloidal suspensions of kaolin, iron ore, silica, and bentonite powder. It was found that the settling performance of Chito‐g‐PAM3 is best among the polymer samples. The jar test results indicate that the ungrafted chitosan has better water clarifying performance than both the PAM and grafted chitosan. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of glutaraldehyde on the performance of a lignosulfonate/chitosan‐based medium density fiberboard adhesive

A lignosulfonate/chitosan‐based medium density fiberboard (MDF) adhesive has been prepared using glutaraldehyde as crosslinking agent. Optimization of glutaraldehyde/chitosan mass ratio was carried out based on characterization details involving MDFs’ mechanical and dimensional performances analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X‐ray diffraction. The addition of glutaraldehyde improved the mechanical properties of the MDF significantly, while it negatively affected the dimensional properties. The MDFs using lignosulfonate/chitosan‐glutaraldehyde adhesives (LS/CS‐Glu) with glutaraldehyde/chitosan mass ratios in the range of 0.25–0.75 fulfilled the Chinese national standard for MDF. Chitosan was crosslinked with self‐polymerized glutaraldehyde through C?N linkages which resulted in the reduction of the amide bonds and hydrogen bonds between chitosan and lignosulfonate. The proposed LS/CS‐Glu adhesives can be a promising candidate for traditional MDF adhesives which contain formaldehyde. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45870.     

Thermo‐ and pH‐responsive behaviors of graft copolymer and blend based on chitosan and N‐isopropylacrylamide

Thermo‐ and pH‐sensitive polymers were prepared by graft polymerization or blending of chitosan and poly(N‐isopropylacrylamide) (PNIPAAm). The graft copolymer and blend were characterized by Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction measurements, and solubility test. The maximum grafting (%) of chitosan‐g‐(N‐isopropylacrylamide) (NIPAAm) was obtained at the 0.5 M NIPAAm monomer concentration, 2 × 10⁻³ M of ceric ammonium nitrate initiator and 2 h of reaction time at 25°C. The percentage of grafting (%) and the efficiency of grafting (%) gradually increased with the concentration of NIPAAm up to 0.5 M, and then decreased at above 0.5 M NIPAAm concentration due to the increase in the homopolymerization of NIPAAm. Both crosslinked chitosan‐g‐NIPAAm and chitosan/PNIPAAm blend reached an equilibrium state within 30 min. The equilibrium water content of all IPN samples dropped sharply at pH > 6 and temperature > 30°C. In the buffer solutions of various pH and temperature, the chitosan/PNIPAAm blend IPN has a somewhat higher swelling than that of the chitosan‐g‐NIPAAm IPN. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1381–1391, 2000     

Preparation and characterization of chitosan‐graft‐poly(L‐lactic acid) microparticles

To improve the properties of chitosan (CS) and poly(L‐lactic acid) (PLLA) and obtain fully biodegradable materials, CS‐g‐PLLA copolymers were prepared using 1‐(3‐Dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride (EDC)/N‐hydroxyl succinimide (NHS) as a coupling agent. The copolymers were characterized by Fourier transform infrared analysis (FTIR), ¹H nuclear magnetic resonance (¹H NMR), elemental analysis, differential scanning calorimetry (DSC), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The results obtained by FTIR and ¹H NMR showed that CS and PLLA were grafted successfully via an amide bond. DSC and XRD results showed that the thermal stability of CS had been significantly improved by grafting PLLA to the molecular chains of CS and the crystallinity of the CS‐g‐PLLA copolymers decreased significantly. Elemental analysis showed that the achieved the maximum degree of substitution of PLLA was 60.88%, while the concentration of CS was 2 mg/mL, the PLLA molecular weight was 10,000, and the EDC/NHS ratio was 2:1. Images from SEM demonstrated that the copolymers had a spherical shape and smooth surface. Moreover, the products were well dispersed without any aggregation. POLYM. ENG. SCI., 56:1432–1436, 2016. © 2016 Society of Plastics Engineers     

Star‐shaped polycaprolactone/chitosan composite hydrogels: fabrication and characterization

Star‐shaped polycaprolactone (stPCL)/chitosan composite hydrogel was fabricated by simply melt/solution blending between chitosan/dicarboxylic acid solution and melted stPCL, using 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and N‐hydroxysuccinimide as conjugating agents to obtain a composite hydrogel. Here, stPCL and modified stPCL were investigated. The stPCL was modified to have a carboxyl‐terminated chain (stPCL‐COOH). The composite hydrogels were transparent. The network structure of the composite hydrogels was investigated. stPCL‐OH had no chemical bond to the chitosan network but stPCL‐COOH could co‐crosslink with the chitosan network. The porous structure and porosity of the composite hydrogels were similar to those of chitosan hydrogel. However, the hydrophobicity of stPCL resulted in a lower swelling ratio compared to chitosan hydrogel. The rheological analysis of the composite hydrogel exhibited a stable crosslinked network. Compression testing of the composite hydrogel obtained from stPCL‐COOH at a mole ratio of stPCL‐COOH and chitosan of 1:1 had optimum compressive mechanical properties comparable to chitosan hydrogel due to a synergistic effect of the flexibility in stPCL and the co‐crosslinking of stPCL‐COOH with the chitosan network. © 2020 Society of Chemical Industry     

Development of fibrin conjugated chitosan/nano β‐TCP composite scaffolds with improved cell supportive property for bone tissue regeneration

In the present study, an attempt has been made to improve cell supportive property of chitosan/nano beta tri‐calcium phosphate (β‐TCP) composite scaffolds by modification of scaffold surface with fibrin using ethyl‐3‐(3‐dimethylaminopropyl) carbodimide (EDC) as crosslinking agent. The developed fibrin conjugated chitosan/nano β‐TCP composite scaffolds possess desired pore size and porosity in the range of 45–151 µm and 81.4 ± 4.1%, respectively. No significant change in compressive strength of scaffolds was observed before and after fibrin conjugation. The calculated compressive strength of fibrin conjugated and non‐conjugated chitosan/nano β‐TCP scaffolds are 2.71 ± 0.14 MPa and 2.67 ± 0.11 MPa, respectively. Results of cell culture study have further shown an enhanced cell attachment, cell number, proliferation, differentiation, and mineralization on fibrin conjugated chitosan/nano β‐TCP scaffold. The uniform cell distribution over the scaffold surface and cell infiltration into the scaffold pores were assessed by confocal laser scanning microscopy. Furthermore, higher expression of osteogenic specific genes such as bone sialo protein, osteonectin, alkaline phosphatase, and osteocalcin (OC) on fibrin conjugated scaffolds was observed when compared to scaffolds without fibrin. Altogether, results indicate the potentiality of developed fibrin conjugated composite scaffolds for bone tissue engineering applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41534.     

Urease immobilization on an ion‐exchange textile for urea hydrolysis

Ion‐exchange textiles are used as organic supports for urease immobilization with the aim of developing reactive fibrous materials able to promote urea removal. A non‐woven, polypropylene‐based cation‐exchange textile was prepared using UV‐induced graft polymerization. Urease was covalently immobilized onto the cation‐exchange textile using three different coupling agents: N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride (EDC), N‐cyclohexyl‐N′‐(b‐[N‐methylmorpholino]ethyl)carbodiimide p‐toluenesulfonate (CMC), and glutaraldehyde (GA). The immobilized biocatalyst was characterized by means of FT‐IR spectrometry, SEM micrographs, dependence of the enzyme activity on pH and temperature, and according to the kinetic constants of the free and immobilized ureases. The biotextile prepared with EDC in the presence of N‐hydroxysuccinimide performs best. The optimum pH was 7.2 for the free urease and 7.6 for the immobilized ureases. The reactivity was maximal at 45 °C for free urease, 50 °C for biotextiles prepared using EDC or CMC, and 55 °C for biotextiles prepared with GA. The activation energy for the immobilized ureases was 4.73–5.67 kcal mol^?1, which is somewhat higher than 4.3 kcal mol^?1 for free urease. The urea conversion for a continuous‐flow immobilized urease reactor is nearly as good as a continuously stirred tank reactor having a much longer residence time, suggesting that the packed bed reactor had sufficient diffusive mixing and residence time to reach nearly optimal results. Urease immobilized on a biotextile using EDC has good storage and operational stability. Copyright © 2006 Society of Chemical Industry     

Pervaporation separation of water/isopropanol mixtures through crosslinked carboxymethyl chitosan/polysulfone hollow‐fiber composite membranes

Carboxymethyl chitosan (CMCS)/polysulfone (PS) hollow‐fiber composite membranes were prepared through glutaraldehyde (GA) as the crosslinking agent and PS hollow‐fiber ultrafiltration membrane as the support. The permeation and separation characteristics for dehydration of isopropanol were investigated by the pervaporation method. Pure chitosan, carboxymethyl chitosan, and crosslinked carboxymethyl chitosan membranes were characterized by Fourier transform infrared (FT‐IR) spectroscopy and X‐ray diffraction (XRD) to study the crosslinking reaction mechanism and degree of crystallinity, respectively. The effects of feed composition, crosslinking agent, membrane thickness, and feed temperature on membrane performance were investigated. The results show that the crosslinked CMCS/PS hollow‐fiber composite membranes possess high selectivity and promising permeability. The permeation flux and separation factor for isopropanol/water is 38.6 g/m²h and 3238.5, using 87.5 wt % isopropanol concentration at 45°C, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1959–1965, 2007     

Hydrogel characteristics of a novel temperature‐sensitive polymer,poly(N‐2‐methoxyisopropylacrylamide)

In this study, a novel temperature‐sensitive polymer, poly(N‐2‐methoxyisopropylacrylamide), PNMIPA, in the crosslinked hydrogel form was obtained. The monomer, N‐2‐methoxyisopropylacrylamide (NMIPA) was synthesized by the nucleophilic substitution reactions of acryloyl chloride with 2‐methoxyisopropylamine. Hydrogel matrix of PNMIPA was obtained by the bulk polymerization method. The bulk polymerization experiments were performed at +4°C, by using N,N‐methylenebisacrylamide (MBA) as crosslinker, polyethyleneglycol (PEG) 4000 as diluent, and potassium persulfate (KPS) and tetramethylethylenediamine (TEMED) as the initiator and accelerator, respectively. The same polymerization procedures were applied by changing monomer, initiator, crosslinker and diluent concentrations in order to obtain crosslinked gel structures having different temperature–sensitivity properties. The equilibrium swelling ratio of PNIMPA gel matrices at constant temperature increased with increasing initiator concentration and decreasing monomer concentration. The use of PEG 4000 as diluent in the gel synthesis resulted in about two times increase in equilibrium swelling ratios in the low temperature region. A decrease in the equilibrium swelling ratios of gel matrices started at 30°C and the decrease became insignificant at 55°C. Temperature‐sensitivities were determined in two different media. Distilled water medium was used in order to observe the temperature‐sensitivity of the gel clearly and the phosphate buffer medium was used in order to represent the temperature‐sensitive swelling behavior of the gel when it is used in biological media. Step effect was applied on ambient temperature in two opposite directions in order to examine the dynamic swelling and shrinking behaviors of the gels. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on the cure kinetics of chitosan‐glutamic acid using glutaraldehyde as crosslinker through differential scanning calorimeter

The curing of chitosan‐glutamic acid with glutaraldehyde as curing agent in the presence of chlorpheniramine maleate (CPM) is carried out with the help of differential scanning calorimeter (DSC). The effect of concentration of chitosan and percentage of crosslinker on the curing of chitosan‐glutamic acid is studied at a heating rate of 5°C/min. Cure kinetics are measured by the DSC using scans from 25 to 220°C at four different heating rates (3, 5, 7, and 10°C/min) and it is observed that the crosslinking of chitosan‐glutamic acid is an exothermic process which results in a positive peak in the DSC thermograms. The activation energy (E_α) is determined by Flynn, Wall, and Ozawa method for curing of the samples. An increase in activation energy (E_α) is observed with the extent of conversion. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Temperature and pH effects on the stability and rheological behavior of the aqueous suspensions of smart polymers based on N‐isopropylacrylamide,chitosan, and acrylic acid

This study describes the stability and rheological behavior of suspensions of poly(N‐isopropylacrylamide) (PNIPAM), poly(N‐isopropylacrylamide)‐chitosan (PNIPAM‐CS), and poly(N‐isopropylacrylamide)‐chitosan‐poly(acrylic acid) (PNIPAM‐CS‐PAA) crosslinked particles sensitive to pH and temperature. These dual‐sensitive materials were simply obtained by one‐pot method, via free‐radical precipitation copolymerization with potassium persulfate, using N,N′‐methylenebisacrylamide as a crosslinking agent. Incorporation of the precursor materials into the chemical networks was confirmed by elementary analysis and infrared spectroscopy. The influence of external stimuli such as pH and temperature, or both, on particle behavior was investigated through rheological measurements, visual stability tests, and analytical centrifugation. The PNIPAM‐CS particles showed higher stability in acid and neutral media, whereas PNIPAM‐CS‐PAA particles were more stable in neutral and alkaline media, both below and above the lower critical solution temperature of PNIPAM (stability data). This is due to different interparticle interactions as well as those between the particles and the medium (also evidenced by rheological data), which were also influenced by the pH and temperature of the medium. Based on the results obtained, we found that the introduction of pH‐sensitive polymers to crosslinked PNIPAM particles not only produced dual‐sensitive materials but also allowed particle stability to be adjusted, making phase separation faster or slower, depending on the desired application. Thus, it is possible to adapt the material to different media. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Chitosan/gelatin porous bone scaffolds made by crosslinking treatment and freeze‐drying technology: Effects of crosslinking durations on the porous structure,compressive strength,and in vitro cytotoxicity

In this study, freezing was used to separate a solute (polymer) and solvent (deionized water). The polymer in the ice crystals was then crosslinked with solvents, and this diminished the linear pores to form a porous structure. Gelatin and chitosan were blended and frozen, after which crosslinking agents were added, and the whole was frozen again and then freeze‐dried to form chitosan/gelatin porous bone scaffolds. Stereomicroscopy, scanning electron microscopy, compressive strength testing, porosity testing, in vitro biocompatibility, and cytotoxicity were used to evaluate the properties of the bone scaffolds. The test results show that both crosslinking agents, glutaraldehyde (GA) and 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide, were able to form a porous structure. In addition, the compressive strength increased as a result of the increased crosslinking time. However, the porosity and cell viability were not correlated with the crosslinking times. The optimal porous and interconnected pore structure occurred when the bone scaffolds were crosslinked with GA for 20 min. It was proven that crosslinking the frozen polymers successfully resulted in a division of the linear pores, and this resulted in interconnected multiple pores and a compressively strong structure. The 48‐h cytotoxicity did not affect the cell viability. This study successfully produced chitosan/gelatin porous materials for biomaterials application. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41851.     

Stability constants of amidoximated chitosan‐g‐poly(acrylonitrile) copolymer for heavy metal ions

Amidoximated chitosan‐g‐poly(acrylonitrile) (PAN) copolymer was prepared by a reaction between hydroxylamine and cyano group in chitosan‐g‐PAN copolymer prepared by grafting PAN onto crosslinked chitosan with epychlorohydrine. The adsorption and desorption capacities for heavy metal ions were measured under various conditions. The adsorption capacity of amidoximated chitosan‐g‐PAN copolymer increased with increasing pH values, and was increased for Cu²⁺ and Pb²⁺ but a little decreased for Zn²⁺ and Cd²⁺ with increasing PAN grafting percentage in amidoximated chitosan‐g‐PAN copolymer. In addition, desorption capacity for all metal ions was increased with increasing pH values in contrast to the adsorption results. Stability constants of amidoximated chitosan‐g‐PAN copolymer were higher for Cu²⁺ and Pb²⁺ but lower for Zn²⁺ and Cd²⁺ than those of crosslinked chitosan. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 469–476, 1999     

Effect of gelatin on the swelling behavior of organic hybrid gels based on N‐isopropylacrylamide and gelatin

Organic hybrid gels based on poly(N‐isopropylacrylamide) and a natural polymer, gelatin, were prepared through two‐step crosslinking with genipin or glutaraldehyde. The effects of the gelatin content on the swelling behaviors and physical properties of these hybrid gels were investigated. The results indicated that the swelling ratio decreased with an increase in the content of gelatin in these hybrid gels. The swelling ratio for the gel crosslinked by genipin was significantly smaller than that for the gel crosslinked by glutaraldehyde. The results also showed that the gel crosslinked with genipin had a higher crosslinking density and a higher gel strength. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1092–1099, 2005