Rheological study of poly(ethylene glycol)/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methylpropanesulphonic acid) semiinterpenetrating network formation

The formation of a series of semiinterpenetrating network (SIPN) hydrogels made by free‐radical copolymerization of N‐isopropylacrylamide (NIPA) and 2‐acrylamido‐2‐methylpropanesulphonic acid (AMPS) with varying comonomer mole ratios, crosslinked with N,N′‐methylene‐bisacrylamide (MBAA) in the presence of poly(ethylene glycol) (PEG) with average molecular weight 6,000 g mol^?1 was studied via determination of complex viscosity, η*, using plate–plate rheometry. The isothermal time dependence of η* at various temperatures or the variation of η* with temperature of pregel solutions was utilized to detect the onset of gelation. The SIPN systems were compared with the corresponding gels made under the same conditions in the absence of PEG. The copolymer mainchain composition has a major effect on the time or temperature for onset of gelation and in particular gelation appears to be inhibited to some extent by MBAA when the AMPS/NIPA mole ratio in the pregel solution exceeds 0.5. The presence or absence of PEG in pregel solutions has a lesser effect on gelation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2083–2087, 2004     

Encapsulation of diclofenac sodium with acidic copolymer hydrogels based on PEG/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) semi‐interpenetrating network using in situ loading technique

A pH‐ and temperature‐responsive semi‐interpenetrating copolymer PEG6000/poly(NIPA‐co‐AMPS) (PEG/AMPS‐co‐NIPA SIPN), for short PEG SIPN, was made by ammonium persulfate‐initiated suspension copolymerization of N‐isopropylacrylamide, 2‐acrylamido‐2‐methylpropanesulphonic acid, and N,N′‐methylene‐bis‐acrylamide (MBAA; crosslinker) in the presence of PEG6000. The PEG SIPN copolymer matrices containing nanostructures made in the high‐temperature copolymerization resulted in channels for PEG and facile migration of drugs. In drug encapsulation or drug‐loading process, one can easily ignore or pay less attention to the interaction between a drug and its encapsulation materials; however, the ignored interactions may induce problems in drug properties or the release behavior in use. Sodium diclofenac (DFNa) precipitates as the carboxylic acid form in an acidic environment, and it is challenging to encapsulate sodium diclofenac in such an acidic matrix without precipitation of the sparingly soluble acid form of DFNa on the surface of the polymer substrate. To avoid bulky precipitation in drug loading, an in situ loading technique was developed for producing gel spheres with DFNa uniformly distributed in the polymer matrix. The technique is based on fast polymerization of spherical droplets of a pregel solution in which the drug is dissolved. Diffusion‐loading prodrugs were made in comparison with in situ loading prodrugs in thermal, release kinetics, and release behavior. Drug release profiles (in pH 7.4 phosphate buffer) show that the new drug loading technique gives controlled release during a period of about 7 days at 37°C. By contrast, gel spheres loaded with sodium diclofenac using the conventional diffusion technique produced almost total release of the drug within about 24 h. The thermal stability of sodium diclofenac, the PEG/AMPS‐co‐NIPA SIPN, and the prodrugs made with the SIPN and sodium diclofenac was studied. A near zero‐order release kinetics was found in the in vitro release of sodium diclofenac with in situ loading PEG SIPN prodrug. We have, for the first time, studied sodium diclofenac release behavior from the PEG SIPN hydrogel systems. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A new composite sorbent for water and dye uptake: Highly swollen acrylamide/2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid/clay hydrogels crosslinked by 1,4‐butanediol dimethacrylate

A novel type of highly swollen hydrogels based on acrylamide (AAm) with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) and clay such as bentonite (Bent) crosslinked by 1,4‐butanediol dimethacrylate (BDMA) was prepared by free radical solution polymerization in aqueous media. Water uptake and dye sorption properties of polyelectrolyte AAm/AMPS hydrogels and AAm/AMPS/Bent composite hydrogels were investigated as a function of composition to find materials with swelling and sorption properties. FTIR analyses were made. Swelling experiments were performed in water and dye solution at 25°C, gravimetrically. Highly swollen AAm/AMPS and AAm/AMPS/Bent hydrogels were used in experiments on sorption of water‐soluble monovalent cationic dye such as Lauths violet “LV, (Thionin).” Swelling of AAm/AMPS hydrogels was increased up to 1,920–9,222% in water and 867–4,644% in LV solutions, while AAm hydrogels swelled 905% in water and swelling of AAm/AMPS/Bent hydrogels was increased up to 2,756–10,422% in water and 1,200–3,332% in LV solutions, while AAm/Bent hydrogels swelled 849% in water. Some swelling kinetic and diffusional parameters were found. Water and LV diffusion into hydrogels was found to be non‐Fickian in character. For sorption of cationic dye, LV into AAm/AMPS and AAm/AMPS/Bent hydrogel was studied by batch sorption technique at 25°C. The amount of the dye sorbed per unit mass removal effiency and partition coefficient of the hydrogels was investigated. The influence of AMPS content in the hydrogels to sorption was examined. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Swelling–deswelling kinetics of poly(N‐isopropylacrylamide) hydrogels formed in PEG solutions

A series of poly(N‐isopropylacrylamide) (PNIPA) hydrogels was prepared by free‐radical crosslinking copolymerization of N‐isopropylacrylamide (NIPA) and N,N′‐methylenebisacrylamide (BAAm) in aqueous solutions of poly(ethylene glycol) of molecular weight 300 g/mol (PEG). The amount of PEG in the polymerization solvent, the crosslinker (BAAm) content, and the gel preparation temperature (T_prep) were varied in the gelation experiments. The hydrogels were characterized by the equilibrium swelling and elasticity tests as well as by the measurements of the deswelling–reswelling kinetics of the hydrogels in response to a temperature change between 25 and 48°C. The rate of deswelling of the swollen gel increases while the rate of reswelling of the collapsed gel decreases as the amount of PEG in the polymerization solvent is increased or as the crosslinker content is decreased. The T_prep effect on the swelling kinetics of the hydrogels was only observed if the PEG content of the polymerization solvent is less than 20%, which is explained with the screening of H‐bonding interactions in concentrated PEG solution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 37–44, 2006     

Reversible sol–gel transitions in aqueous solutions of N‐isopropylacrylamide ionic copolymers

Ionic copolymers of N‐isopropylacrylamide (NIPA) exhibiting sol–gel transitions in aqueous solutions were investigated. The studies were aimed at understanding of the structure–property relationship in the design of injectable, in situ forming gels for potential biomedical applications in delivery of therapeutics and tissue engineering. Aqueous solutions of NIPA ionic copolymers were found to flow freely at ambient temperatures and formed soft gels with controlled syneresis above 32 °C, the lower critical solution temperature of NIPA. The sol–gel transitions and temperature‐dependent properties of the resulting gels were analyzed using dynamic rheometry and ultraviolet and infrared spectrometry, and were found to be controlled by the molecular weight and composition of copolymers, ionization state of comonomers and composition of aqueous solvent. Copyright © 2008 Society of Chemical Industry     

Radiation polymerization and concentration separation of P(NIPA‐co‐AMPS) hydrogels

Extraction or concentration with temperature‐sensitive hydrogels is a novel separation technology. In this study, N‐isopropylacrylamide (NIPA) was synthesized by acrylonitrile and isopropanol. Poly(N‐isopropylacrylamide) (PNIPA) and copolymer of NIPA and 2‐acrylamide‐2‐methylpropane sulfonate [P(NIPA‐co‐AMPS)] hydrogels were prepared by radiation polymerization. Dependence of their swelling behavior on temperature was studied. Effects of radiation dose on polymerization, feed composition on thermoresponse, electrolyte on relative swelling ratio, and swelling and deswelling kinetics were investigated. The experimental results showed that P(NIPA‐co‐AMPS) hydrogels with low content of AMPS/NIPA (1–5 %), prepared at a radiation dose‐rate of 1 kGy/h and total dose of 30–40 kGy, could enhance the swelling ratio of PNIPA hydrogels significantly and raise the phase‐transition temperatures. P(NIPA‐co‐AMPS) hydrogels produced under optimum conditions were used to concentrate aqueous bovine serum albumin (BSA, M = 69 000 g mol^?1) solution. When aqueous BSA concentration was below 5 %, the separation efficiency was more than 80 % with low cost and low energy consumption. Copyright © 2005 Society of Chemical Industry     

Hydrogel characteristics of a novel temperature‐sensitive polymer,poly(N‐2‐methoxyisopropylacrylamide)

In this study, a novel temperature‐sensitive polymer, poly(N‐2‐methoxyisopropylacrylamide), PNMIPA, in the crosslinked hydrogel form was obtained. The monomer, N‐2‐methoxyisopropylacrylamide (NMIPA) was synthesized by the nucleophilic substitution reactions of acryloyl chloride with 2‐methoxyisopropylamine. Hydrogel matrix of PNMIPA was obtained by the bulk polymerization method. The bulk polymerization experiments were performed at +4°C, by using N,N‐methylenebisacrylamide (MBA) as crosslinker, polyethyleneglycol (PEG) 4000 as diluent, and potassium persulfate (KPS) and tetramethylethylenediamine (TEMED) as the initiator and accelerator, respectively. The same polymerization procedures were applied by changing monomer, initiator, crosslinker and diluent concentrations in order to obtain crosslinked gel structures having different temperature–sensitivity properties. The equilibrium swelling ratio of PNIMPA gel matrices at constant temperature increased with increasing initiator concentration and decreasing monomer concentration. The use of PEG 4000 as diluent in the gel synthesis resulted in about two times increase in equilibrium swelling ratios in the low temperature region. A decrease in the equilibrium swelling ratios of gel matrices started at 30°C and the decrease became insignificant at 55°C. Temperature‐sensitivities were determined in two different media. Distilled water medium was used in order to observe the temperature‐sensitivity of the gel clearly and the phosphate buffer medium was used in order to represent the temperature‐sensitive swelling behavior of the gel when it is used in biological media. Step effect was applied on ambient temperature in two opposite directions in order to examine the dynamic swelling and shrinking behaviors of the gels. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Non-Gaussian elasticity of poly(2-acrylamido-2-methylpropane sulfonic acid) gels

Summary A series of strong polyelectrolyte hydrogels was prepared from the sodium salt of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) as the monomer and N,N-methylene(bis)acrylamide (BAAm) as a crosslinker. The hydrogels prepared between 9 and 50 mol % BAAm appeared homogeneous to eye but exhibited large spatial fluctuations of polymer concentration, as determined by the light scattering measurements. The elasticity tests show that the modulus of elasticity of gels increases with increasing degree of swelling, starting from the gel preparation state. Thus, the mechanical properties of the hydrogels are improved on their swelling in water. It was shown that the hydrogels even at a gel state just after their preparation are in the non-Gaussian regime due to the high degree of spatial gel inhomogeneity.     

Swelling properties of CMC‐g‐poly (AAm‐co‐AMPS) superabsorbent hydrogel

A series of biopolymer‐based superabsorbent hydrogels based on carboxymethyl cellulose has been prepared by free‐radical graft copolymerization of acrylamide and 2‐acrylamido‐2‐methylpropan sulfonic acid (AMPS) in aqueous solution using methylenebisacrylamide as a crosslinking agent and ammonium persulfate as an initiator. The effect of variables on the swelling capacity such as: acrylamide/AMPS weight ratio, reaction temperature, and concentration of the initiator and crosslinker were systematically optimized. The results indicated that with increasing the amount of AMPS, the swelling capacity is increased. FT‐IR spectroscopy and scanning electron microscope analysis were used to confirm the hydrogel structure. Swelling measurements of the synthesized hydrogels in different salt solutions indicated considerable swelling capacity. The absorbency under load of the superabsorbent hydrogels was determined by using an absorbency under load tester at various applied pressures. A preliminary swelling and deswelling behaviors of the hydrogels were also studied. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of polyhedral oligomeric silsesquioxane nano‐crosslinked poly(ethylene glycol)‐based hybrid hydrogels for drug delivery and antibacterial activity

The synthesis is reported of novel hybrid hydrogels based on ethylenediaminetetraacetic acid dianhydride and poly(ethylene glycol) (PEG) with octa‐aminopropyl polyhedral oligomeric silsesquioxane hydrochloride salt (OA‐POSS) as a nano‐crosslinker under solvent‐free conditions. The molecular weight of PEG was varied between 600 and 1000 Da. The synthesized hydrogels were characterized using various techniques. Further, the swelling behavior and antibacterial activity of the hydrogels and release kinetics of metronidazole (MTZ) as a model drug from them were evaluated. Experimental results demonstrate that hydrogels with tunable properties can be synthesized by varying the PEG molecular weight and type of crosslinker (hybrid or organic). Among the synthesized hybrid hydrogels, that crosslinked by OA‐POSS with long PEG chains (1000 Da) showed the highest swelling degree (2000%), drug encapsulation efficiency (88%) and extent of MTZ release (96%). © 2018 Society of Chemical Industry     

Synthesis and characterization of fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels

BACKGROUND: A considerable amount of research has been focused on smart hydrogels that can respond to external environmental stimuli, especially temperature and pH. In this study, fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels were prepared by free radical copolymerization in aqueous solution using poly(ethylene glycol) (PEG) as a pore‐forming agent. RESULTS: Swelling studies showed that the hydrogels produced had both temperature and pH sensitivity. The deswelling kinetics at high temperature demonstrated that the shrinking rates were influenced by the addition of the pore‐forming agent and the amount of acrylic acid in the initial total monomers. The deswelling curves in low‐buffer solutions had two stages. Pulsatile swelling studies indicated that the PEG‐modified hydrogels were superior to the normal ones. These different swelling properties were further confirmed by the results of scanning electron microscopy. CONCLUSION: Such fast responsive thermo‐ and pH‐sensitive hydrogels are expected to be useful in biomedical fields for stimuli‐responsive drug delivery systems. Copyright © 2008 Society of Chemical Industry     

Swelling and elasticity of poly (N‐isopropylacrylamide‐co‐4‐vinyl benzene sulfonic acid sodium salt) hydrogels

The mechanical properties and the swelling behavior of hydrogels based on N‐isopropylacrylamide (NIPA) and 4‐vinylbenzenesulfonic acid sodium salt (styrene sulfonate, SSA) monomers were investigated. The mole fraction of SSA in the comonomer feed varied between 0 and 1, whereas the crosslinker ratio was fixed at 1/85. Both the swelling and the elasticity data of the hydrogels swollen in water show that they are in the non‐Gaussian regime. The exponents found for the charge density dependence of the equilibrium swelling ratio as well as for the volume dependence of the gel elastic modulus are in good agreement with the predicted course of the non‐Gaussian elasticity of swollen hydrogels. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 135–141, 2004     

Dual‐Crosslinked Human Serum Albumin‐Polymer Hydrogels for Affinity‐Based Drug Delivery

A dual‐crosslinked in situ gelling drug delivery scaffold based on dextran (DEX), thiolated serum albumin, and poly(ethylene glycol) (PEG) is presented. Dextran–vinyl sulfone conjugates with varied molecular weight and degrees of substitution are synthesized by controlling the reaction time and temperature with divinyl sulfone. Dextran–human serum albumin (sHSA) hydrogels are prepared using a thiol‐vinyl sulfone Michael addition reaction with thiolated albumin as the crosslinker. Poly(ethylene glycol) dithiol is added as a third component to the crosslinked dextran–human serum albumin hydrogel to facilitate additional crosslinking, and reduce gelation time, while modulating the physicochemical properties of the Dex–sHSA–PEG network. The onset of gelation of the modular three‐component dual‐crosslinked hydrogel network ranges from 45 min to 1.5 h depending on gel constituent concentrations and the gelation temperature (25 or 37 °C). All gels remain stable for over a 25 d period under physiological conditions. In vitro drug release assays show that dual‐crosslinked Dex–sHSA–PEG hydrogels can deliver doxorubicin in a sustained manner over 7 d. Finally, a Tetrazolium‐based assay shows the biocompatible nature of the Dex–sHSA–PEG hydrogels and capacity to deliver doxorubicin successfully to MCF‐7 breast cancer cells.     

Environmental responses of poly(N‐isopropylacrylamide‐co‐glycidyl methacrylate derivatized dextran) hydrogels

A series of intelligent hydrogels (poly(NIPA‐co‐GMA‐Dex)) were synthesized by copolymerization of N‐isopropylacrylamide (NIPA) and glycidyl methacrylate derivatized dextran (GMA‐Dex) in aqueous solution with different ratios. Their swelling behaviors at different temperatures and in different pH and ionic strengths, and their mechanical properties were studied. It has found that poly(NIPA‐co‐GMA‐Dex) hydrogels are temperature‐, pH‐, and ionic strength‐sensitive associated with the roles of the component PNIPA and GMA‐Dex, respectively. Most significantly, poly (NIPA‐co‐GMA‐Dex) hydrogels exhibit simultaneously good swelling properties and mechanical properties. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2435–2439, 2005     

Effect of drug loading on the properties of temperature‐responsive polyester–poly(ethylene glycol)–polyester hydrogels

Hydrogels that can undergo gelation upon injection in vivo are promising systems for the site‐specific delivery of drugs. In particular, some thermo‐responsive gels require no chemical additives but simply gel in response to a change from a lower temperature to physiological temperature (37 °C). The gelation mechanism does not involve covalent bonds, and it is possible that incorporation of drugs into the hydrogel could disrupt gelation. We investigated the incorporation of drugs into thermo‐responsive hydrogels based on poly(?‐caprolactone‐co‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(?‐caprolactone‐co‐lactide) (PCLA–PEG–PCLA). Significant differences in properties and in the response to incorporation of the anti‐inflammatory drug celecoxib (CXB) were observed as the PEG block length was varied from 1500 to 3000 g mol^?1. Linear viscoelastic moduli of a PCLA–PEG–PCLA hydrogel containing a 2000 g mol^?1 PEG block were least affected by the incorporation of CXB and this gel also exhibited the slowest release of CXB, so the incorporation of phenylbutazone, methotrexate, ibuprofen, diclofenac and etodolac was also investigated for this hydrogel. Different drugs resulted in varying degrees of syneresis of the hydrogels, suggesting that they interact with the polymer networks in different ways. In addition, the drugs had varying effects on the viscoelastic and compressive moduli of the gels. The results showed that the effects of drug loading on the properties of thermo‐responsive hydrogels can be substantial and depend on the drug. For applications such as intra‐articular drug delivery, in which the mechanical properties of the hydrogel are important, these effects should thus be studied on a case‐by‐case basis. © 2019 Society of Chemical Industry     

Improved swelling–deswelling behavior of poly(N‐isopropyl acrylamide) gels with poly(N,N′‐dimethyl aminoethyl methacrylate) grafts

Thermoresponsive and pH‐responsive gels were synthesized from N‐isopropyl acrylamide (NIPA) and N,N′‐dimethyl aminoethyl methacrylate (DMAEMA) monomers. Gelation reactions were carried out with both conventional free‐radical polymerization (CFRP) and controlled free‐radical polymerization [reversible addition fragmentation transfer (RAFT)] techniques. The CFRP gels were prepared by polymerizing mixtures of NIPA and DMAEMA in 1,4‐dioxane in presence of N,N'‐methylene bisacrylamide (BIS) as cross‐linker. The RAFT gels were prepared by a the polymerization of NIPA via a similar process in the presence of different amounts of poly(N,N′‐dimethyl aminoethyl methacrylate) macro chain‐transfer agent and the crosslinker. These gels were characterized by scanning electron microscopy (SEM) and differential scanning calorimetry. SEM analysis revealed a macroporous network structure for the RAFT gels, whereas their volume phase‐transition temperatures (VPTTs) were found to be in the range 32–34°C, close to that of poly(N‐isopropyl acrylamide) gels. However, the CFRP copolymer gels exhibited a higher VPTT; this increased with increasing DMAEMA content. The RAFT gels exhibited higher swelling capabilities than the corresponding CFRP gels and also showed faster shrinking–reswelling behavior in response to changes in temperature. All of the gels showed interesting pH‐responsive behavior as well. The unique structural attributes exhibited by the RAFT gels can potentially open up opportunities for developing new materials for various applications, for example, as adsorbents or carrier of drugs or biomolecules. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42749.     

Reentrant phase transition and fast responsive behaviors of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels prepared in poly(ethylene glycol) solutions

Macroporous temperature‐sensitive poly {N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels were synthesized by free‐radical crosslinking polymerization of the monomer N‐[3‐(dimethylaminopropyl)] methacrylamide and the crosslinker N,N′‐methylenebisacrylamide in aqueous solutions at 22°C. Poly(ethylene glycol) (PEG) with a molecular weight of 1000 g/mol was used as the pore‐forming agent during the polymerization reaction. The concentration of PEG in the polymerization solutions was varied between 0 and 18 wt %, whereas the crosslinker (N,N′‐methylenebisacrylamide) concentration was fixed at 2 wt % (with respect to the monomer). The effects of the PEG concentration on the thermo‐induced phase‐transition behavior and the chemical structure, interior morphology, and swelling/deswelling kinetics were investigated. Normal‐type hydrogels were also prepared under the same conditions without PEG. An interesting feature of the swelling behavior of both the normal‐type and macroporous hydrogels was the reentrant phase transition, in which the hydrogels collapsed once and reswelled as the temperature was continuously increased. Scanning electron micrographs revealed that the interior network structure of the hydrogels prepared in PEG solutions became more porous with an increase in the PEG concentration in the polymerization solution. This more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved responsive rate to external temperature changes during the deswelling and swelling processes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Network parameters and volume phase transition behavior of poly(N‐isopropylacrylamide) hydrogels

Thermosensitive hydrogels were prepared by free radical polymerization in aqueous solution from N‐isopropylacrylamide (NIPA) monomer and N,N‐methylenebis(acrylamide) (MBAAm) crosslinker. The swelling equilibrium of the hydrogels in deionized water was investigated as a function of temperature and MBAAm content. The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the amount of MBAAm content. The average molecular mass between crosslinks and polymer–solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. The swelling equilibrium of the hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In deionized water, the hydrogels showed a discontinuous volume phase transition at 32°C. In SDS and DTAB solutions, the equilibrium swelling ratio and the volume phase transition temperature (lower critical solution temperature) of the hydrogels increased, which is ascribed to the conversion of nonionic PNIPA hydrogel into polyelectrolyte hydrogels because of binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method; it was found that the electric conductivity of the PNIPA–surfactant systems depended strongly on both the type and concentration of surfactant solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1756–1762, 2006     

Chitosan‐modified nanoclay–poly(AMPS) nanocomposite hydrogels with improved gel strength

BACKGROUND: Making (nano)composite structures is one of the efficient approaches for strengthening hydrogels extended in recent years. The present paper deals with the synthesis and properties of novel nanocomposite hydrogels based on 2‐acrylamido‐2‐methylpropane‐1‐sulfonic acid (AMPS). Initially, a bio‐modified clay, chitosan‐intercalated montmorillonite (chitoMMT), was prepared. Then, this was incorporated into the polymerization of AMPS in the presence of a macro‐crosslinker, i.e. poly(ethylene glycol) dimethacrylate, to yield super‐swelling nanocomposite hydrogels. The swelling capacity as well as some structural, rheological and thermomechanical properties of the hydrogels were studied and compared with those of the clay‐free counterpart. RESULTS: ChitoMMT exhibited no toxicity, which was confirmed using cell‐culture testing. A chitoMMT content of ca 6% was found to be the most favourable content of the bio‐modified clay for achieving a product with improved properties (i.e. the highest gel content, the highest gel strength and optimal thermal stability). Based on a dynamic mechanical thermal analysis study, an increased glass transition temperature (98.2 °C) and improved rubbery modulus (up to 238% higher than that of the clay‐free counterpart) were recorded. Thermogravimetric analysis verified that the thermal stability of nanocomposite samples was higher than that of clay‐free samples. CONCLUSION: Owing to the non‐toxicity of the incorporated chitoMMT, the strengthened hydrogels may be considered as potential candidates for bio‐applications. Copyright © 2009 Society of Chemical Industry     

Preparation of collagen‐immobilized poly(ethylene glycol)/poly(2‐hydroxyethyl methacrylate) interpenetrating network hydrogels for potential application of artificial cornea

To enhance the mechanical strength of poly(ethylene glycol)(PEG) gels and to provide functional groups for surface modification, we prepared interpenetrating (IPN) hydrogels by incorporating poly(2‐hydroxyethyl methacrylate)(PHEMA) inside PEG hydrogels. Formation of IPN hydrogels was confirmed by measuring the weight percent gain of the hydrogels after incorporation of PHEMA, as well as by ATR/FTIR analysis. Synthesis of IPN hydrogels with a high PHEMA content resulted in optically transparent and extensively crosslinked hydrogels with a lower water content and a 6 ～ 8‐fold improvement in mechanical properties than PEG hydrogels. Incorporation of less than 90 wt % PHEMA resulted in opaque hydrogels due to phase separation between water and PHEMA. To overcome the poor cell adhesion properties of the IPN hydrogels, collagen was covalently grafted to the surface of IPN hydrogels via carbamate linkages to hydroxyl groups in PHEMA. Resultant IPN hydrogels were proven to be noncytotoxic and cell adhesion study revealed that collagen immobilization resulted in a significant improvement of cell adhesion and spreading on the IPN hydrogel surfaces. The resultant IPN hydrogels were noncytotoxic, and a cell adhesion study revealed that collagen immobilization improved cell adhesion and spreading on the IPN hydrogel surfaces significantly. These results indicate that PEG/PHEMA IPN hydrogels are highly promising biomaterials that can be used in artificial corneas and a variety of other load‐bearing tissue engineering applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011