Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin

The purpose of this study was to evaluate the effect of etching and silane priming on bond strength to a feldspathic porcelain (VMK 68) of a composite resin (Clearfil APX). Two hydrofluoric acid etchants (2.5% and 5%) and seven different etching times (0, 30, 60, 90, 120, 150, and 180 seconds) were used to etch the porcelain specimens respectively. A self-curing bonding agent containing a silane coupler (Clearfil Porcelain Bond) was used on both etched and unetched porcelain surfaces. Etched relief patterns were observed by means of a scanning electron microscope, and the bond strengths between the photocured composite resin and the porcelain were determined. Scanning electron micrographs revealed complicated etching patterns with increased etching time periods. Shear testing results showed that the bond strength to the unetched porcelain of the composite resin was very low, and that etching periods for more than 30 seconds effectively enhanced the bond strength. Of the two etching agents applied to the unsilanated porcelain, the buffered 2.5% etchant produced higher bond strengths than the 5% etchant for all etching time periods except for 180 seconds. Silane priming was effective and critical for improving bond strength to the porcelain. Application of the silane bonding agent to the porcelain after hydrofluoric acid etching appeared to be suitable for achieving consistent bonding between the composite resin and the porcelain.     

Effects of different surface treatment methods on the bond strength of composite resin to porcelain

In this study failures of composite resin/ porcelain interfaces under shear loading were examined. Porcelain firing were made onto metal cylinders and porcelain surfaces were roughened with burrs or treated with hydrofloric acid gel and/ or sandblasted with a Microetcher. Two silane coupling agents were used in five groups, each of which had 22 samples. All of the treated samples were restored with a hybrid-type composite resin. Then each group was divided into two subgroups according to storage times of 24 h and 30 days. After thermocyling the samples which were stored for 30 days, all of the groups were subjected to shear force at the composite resin/porcelain interface until fracture occurred. The results showed that there were differences both in the 24-h and 30-day storage period bond strengths between the various surface treatment methods. The samples treated with all three of the Microetcher, hydrofloric acid and silane exhibited the highest shear bond values after 24 h storage, followed by the microetched/silane and the hydrofluoric acid/silane groups (F: 570.31, P: 0.00). After 30 days, the highest mean shear bond strength values were again with samples treated by all three processes. The storage period and thermocycling decreased the bond strength of samples, however, there was a significant difference among groups (F: 1388-55, P: 0.00). Silane pre-treatment of porcelain was important as the mean bond strength of sandblasted/etched specimens were significantly lower than the other groups which were treated mechanically, in 24 h. Sandblasting seems to have little effect on the bonding. The comparison of 24-h and 30-day samples have also significant difference (F: 91.4376, P: 0.00).     

The effect of different porcelain conditioning techniques on shear bond strength of stainless steel brackets

A 51-year-old man was admitted because of bilateral fatigable blepharoptosis with diurnal fluctuation. He had a tendency to take much instant foods before onset. On admission, he showed symmetrical bilateral ptosis, supranuclear upward gaze palsy and vertical diplopia. Ptosis mildly improved on lateral or upward gaze. Bell's phenomenon and pupillary response were intact. Intravenous edrophonium infusion test and serum antiacetylcholine receptor antibody were negative. Cranial MRI and CT demonstrated the lesion in the periaqueductal gray (PAG) region from superior colliculus to upper pontine level, which was remarkably enhanced by Gd-DTPA infusion. He was diagnosed as midbrain ptosis, probably due to atypical Wernicke's encephalopathy. It was conceivable that the PAG lesion might be contributory to fatigable blepharoptosis (pseudomyasthenia) and supranuclear upward gaze palsy in the present case, because the PAG controls levator palpebrae neurons of central caudal nucleus in oculomotor nucleus complex and receives afferents from the limbic system., reticular formation and posterior commissure.     

24-hour shear bond strength of metal orthodontic brackets bonded to porcelain using various adhesion promoters

Clinically, orthodontists are often faced with the difficulties of bonding to porcelain crowns, veneers, or bridges. Traditional methods of dealing with this are often time-consuming and generally esthetically unacceptable to patients. Current interest involves the use of organosilane primers with or without NTG-GMA and BPDM resins to aid in chemically bonding porcelain with traditional orthodontic adhesives. This study compared the bond strength of three types of adhesion promoters: Ormco Porcelain Primer (OR) (Ormco Corp., Glendora, Calif.), All-Bond2 (AB2) (Bisco Dental Products, Inc., Itasca, Ill.), and Scotchprime Ceramic Primer (SP) (3M, St. Paul, Minn.) with two orthodontic adhesives: Phase II (Reliance, Inc., Itasca, Ill.) and Rely-a-bond (Reliance, Inc., Itasca, Ill.). Eighty ceramometal samples were fabricated and hydrated for 1 week in distilled water before bonding. Next, the samples were etched with 2.5 % HF acid for 90 seconds, rinsed and upper central incisor metal orthodontic brackets were bonded with the various primers and adhesives. After 24 hours they were sheared off with an MTS machine at at rate of 0.5 mm/min, and the bond strength was measured. The mean shear bond strengths (MPa) with Phase II were as follows; Control 0.44 (sigma = 0.22), AB2 8.40 (sigma = 3.61), OR 13.31 (sigma = 5.79), SP 13.53 (sigma = 3.34). With Rely-a-bond, the shear bond strengths were Control 0.41 (sigma = 0.67), AB2 4.34 (sigma = 1.88), OR 9.73 (sigma = 4.58), and SP 12.40 (sigma = 3.05).(ABSTRACT TRUNCATED AT 250 WORDS)     

Enamel and dentine shear bond strength of two resin modified glass ionomers and two resin based adhesives

OBJECTIVES: The purpose of this in vitro study was to compare the shear bond strength to enamel and dentine of two resin modified glass ionomers (Fuji Bond L.C. and Vitrebond) and two resin based adhesives (Prime&Bond 2.1 and Scotchbond Multi-Purpose). METHODS: A total of 120 bond sites were prepared on either enamel (n = 60) or dentine (n = 60) on human molars by grinding the teeth flat with a 600 grit sandpaper. Each tooth substrate group was divided into four groups (n = 15) to match each material. Each of the four material systems was applied, according to the manufacturers instructions, to the bond sites. On top of the placed material, a microfilled composite was placed in a 2.5 mm diameter matrix and light-cured for 40 s. All specimens were thermocycled 500 times (5-55 degrees C). Shear bond strength values were determined 120 h after bonding using a Zwick testing machine. One-way ANOVA was used to determine whether significant differences (p < 0.05) existed among the material groups on enamel and dentine. Pairwise comparisons were used to determine significant differences (p < 0.05) among the four products. RESULTS: The ANOVA revealed strong significant differences on enamel (p = 0.0001) and dentine (p = 0.0172). The enamel bond strength values of the two resin based adhesives were significantly higher than one of the resin modified glass ionomers (Vitrebond), while the other resin modified glass ionomers did not differ from Scotchbond Multi-Purpose. On dentine, however, Vitrebond performed significantly better than the two resin based adhesives. CONCLUSIONS: The investigated resin modified glass ionomers bonded better to dentine surfaces than to enamel surfaces, while the investigated resin based adhesive systems bonded better to enamel than to dentine.     

Effect of application technique and dentin bonding agent interaction on shear bond strength

This study evaluated the interaction of five clinical application techniques and the shear bond strength of four DBAs (OptiBond FL, Clearfil SE Bond, PQ1 and Prime & Bond NT). A hybrid resin composite (Herculite XRV restorative resin) was attached to human dentin surfaces using five application techniques: Group A--adhesive spread with a 3M brush for 30 seconds, followed by compressed air 0.5 cm from the surface for one second to remove the excess adhesive. Group B--adhesive spread with a 3M brush for 30 seconds, followed by compressed air 0.5 cm from the surface for three seconds to remove the excess adhesive. Group C--adhesive spread with 3M brush for 30 seconds, excess adhesive removed with a clean brush, two strokes side by side, no compressed air. Group D--adhesive spread with a Micro-applicator brush for 30 seconds followed by compressed air 0.5 cm from the surface for one second to remove the excess adhesive. Group E--adhesive spread with a Micro-applicator brush for 30 seconds, the excess adhesive removed with a clean brush, two strokes side by side and no compressed air. The specimens were stored in distilled water at 37 degrees C for 24 hours, followed by thermocycling between 5 degrees C and 55 degrees C for 1,000 cycles. The shear bond strengths were determined on a universal testing machine operating with a crosshead speed of 5 mm/minute. The fracture sites were examined by 20x stereo microscope to determine the type of failure that occurred during the debonding procedure. Bond strength data were compared with analysis of variance at a significance level of p<0.05. Post hoc comparisons of means were performed with t-tests with p-values adjusted for multiple comparisons. This in vitro study concluded that there was an interaction between the application technique and bonding agent tested. All DBAs utilized the one-second compressed air technique, which yielded the highest bond strengths.     

过氧化氢处理提高玻璃纤维桩与树脂水门汀的粘结强度

目的:研究两种不同浓度的过氧化氢(H2O2)溶液处理玻璃纤维桩表面对纤维桩与树脂水门汀粘结强度的影响.方法:将16支玻璃纤维桩随机分为4组,每组4支.组1为对照组,组2为单纯硅烷组,组3为10%(体积分数)H2O2+硅烷组,组4为30%(体积分数)H2O2+硅烷组.将各组纤维桩与树脂水门汀粘结,制成哑铃形微拉伸试件,测定其微拉伸粘结强度并观察其断裂模式.结果:组1(对照组)微拉伸粘结强度为(18.81±4.04)MPa,组2(单纯硅烷组)为(26.70±9.63)MPa,组3(10%H2O2+硅烷组)为(39.07±6.47)MPa,组4(30%H2O2+硅烷组)为(46.05±5.97)MPa.结论:H2O2溶液处理玻璃纤维桩表面后涂布硅烷偶联剂可明显提高玻璃纤维桩与树脂水门汀的粘结强度.     

Effects of various methods of chlorhexidine application on shear bond strength

We report a simple new method for measuring the conduction velocity (CV) of A delta fibers in normal subjects. A large positive component of somatosensory evoked potential (SEP) whose peak latency was approximately 250 ms was clearly recorded only when strong electrical stimulation causing a definite painful feeling was applied to the skin. The CV of the peripheral nerve was calculated by measuring the latency difference of this component between the distal-stimulated SEP and proximal-stimulated SEP and the distance between two stimulus sites. The CV was approximately 11.4 m/s, (range 8.8-15.9 m/s), in the range of A delta fibers. The sleep effect on pain-related SEP was also observed in 3 subjects. The amplitude of pain-related SEP decreased with the progress of sleep stage. This simple and novel method is available in most clinics and should be very useful in investigating the physiologic functions of peripheral nerves in patients as well as normal subjects.     

Effects of different types of light guides on shear bond strength

Several patients with end-stage renal disease went to Bombay for renal transplantation from nonrelated living donors and then returned to Turkey for posttransplantation follow-up. The aims of this study are to evaluate the long-term results of renal transplantation from nonrelated living donors in Turkish patients with end-stage renal disease and to discuss the ethical and social aspects of nonrelated kidney donation. One hundred and twenty-seven patients (89 males, 38 females; mean age 38.1, range 17-63 years) were investigated retrospectively. None of the patients went to Bombay on our advice. All transplantations were performed between 1991 and 1995. The mean follow-up period after transplantation was 34.2 (range 1-68) months. Graft survival rates were 85, 83, and 57% after 3 months and 1 and 5 years, respectively. Patient survival rates were 94, 93, and 92% after 3 months and 1 and 5 years, respectively. Seven patients died within the first 3 months after the transplantation. Surgical problems, infections, acute rejection, ciclosporin nephrotoxicity, and hepatic problems were common complications. We conclude that medical and surgical complications occur frequently in paid kidney transplantation, but most of these complications can be prevented by adequate preoperative management, and precautionary measures should be taken to prevent commercialization of renal transplantation before the spread of emotionally related living kidney donation.     

The effect of air abrasion on shear bond strength to dentin with dental adhesives

This study compared the effects of different dentin surface treatments on the shear bond strengths of three adhesive systems. The adhesive systems included a resin-modified glass ionomer, Fuji II LC, and two dentin bonding systems, One Step and Scotchbond Multi-Purpose Plus. The surface treatments compared for each adhesive system were as follows: 1) the controls, which were conditioned, 2) air abrasion at 120 psi without conditioning, 3) air abrasion at 160 psi without conditioning, 4) air abrasion at 120 psi with conditioning, and 5) air abrasion at 160 psi with conditioning. The KCP 1000 Whisperjet was used for all air-abrasive specimens. Controls for each adhesive material (Fuji II LC, One Step, Scotchbond Multi-Purpose Plus) were bonded using manufacturers' recommendations. Results showed that air abrasion significantly lowered bond strength of the resin-modified glass ionomer, conditioned or nonconditioned (P < 0.01). Air abrasion alone significantly lowered bond strengths of the dentin bonding agent systems (P < 0.01). However, air abrasion plus conditioning of the dentin surface resulted in bond strengths that were similar to the conditioned-only specimens (P < 0.01).     

Shear bond strength of orthodontic brackets cemented with a zinc oxide-polyvinyl cement

The purpose of this study was to compare the shear bond strengths and enamel surface structure after debonding a conventional metal bracket and a polycrystalline ceramic bracket bonded with a bipolar zinc oxide-polyvinyl cement (F-21) or a light-cured resin cement (Transbond). Forty extracted human premolars were used. The buccal enamel surfaces were used, and the teeth randomly divided into four groups of 10 teeth each: group 1: conventional metal bracket (Unitek) bonded with Transbond; group 2: metal bracket bonded with F-21; group 3: ceramic bracket (Transcend 2000) bonded with Transbond; and group 4: ceramic bracket bonded with F-21. The brackets were bonded to the etched enamel surfaces according to manufacturer's instructions. All specimens were stored in distilled water for 24 hours and then thermocycled for 300 cycles between 5 degrees C and 55 degrees C. The specimens were mounted in dental stone and placed in the Instron at a crosshead speed of 0.5 mm/min with a knife-edged blade. Immediately after debonding, the enamel surface and bracket-enamel interface were evaluated visually and with a stereomicroscope. Representative samples were then examined with the scanning electron microscope. The analysis of variance and Student-Newman-Keuls tests were performed. The results in megapascals were Group 1: 19,6 (+/- 9,6); group 2: 14,3 (+/- 4,6); group 3: 28,8 (+/- 12,6); and group 4: 18,5 (+/- 7,5). Group 3 was statistically significantly different (P < 0.008) from all other groups. Groups 1, 2, and 4 were not significantly different.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of disinfectants on the bond strength of composite to dentin

The article describes ultrasonographic (US), computed tomographic (CT), 99mTc-MIBI and angiographic findings of 16 cases of multiple endocrine neoplasia (MEN) confirmed by operations and pathological examinations. Hyperparathyroidism either was the first manifestation of MEN I or was diagnosed simultaneously with other tumors. Medullary thyroid carcinoma usually developed first or coincided with pheochromocytoma in MEN I. Regular US and CT screening can lead to the detection of new endocrine neoplasia. The authors consider that US and CT are the best imaging methods for MEN.     

The effect of dentin disinfectants on shear bond strength of resin-modified glass-ionomer materials

The purpose of this study was to investigate the effect of dentinal disinfection with a 2% chlorhexidine or a 0.11% I2-KI/CuSO4 solution on the shear bond strength of three resin-modified glass-ionomer cements: Fuji II LC, Photac-Fil, and Vitremer. The occlusal surfaces of extracted human teeth were flattened to dentin. Specimens were randomly assigned to one of nine treatment groups (n = 12). For each glass-ionomer material, there was a control group and two treatment groups in which the dentin was treated with either a 2% chlorhexidine or a 0.11% I2-KI/CuSO4 solution before the dentin was treated with the recommended dentin conditioner prior to glass-ionomer bonding. Specimens were stored for 1 day in water, thermocycled, and tested in shear until failure. The chlorhexidine solution did not significantly affect the shear bond strengths of any of the cements, but the I2-KI/CuSO4 solution significantly lowered the bond strengths of Vitremer and Fuji II LC compared to the controls.     

In vitro peel/shear bond strength evaluation of orthodontic bracket base design

OBJECTIVES: The adhesive capacity of 17 different bracket types was evaluated in an in vitro peel/shear test. METHODS: Silane-treated metal bars were used as substrates with all bonding being performed using the orthodontic adhesive Concise. The effect of aluminium oxide air abrasion on the bonding performance of recycled metal bracket bases was evaluated. Morphological examination of the bracket bases was carried out under scanning electron microscopy. Statistics analysis included one-way ANOVA with Tukey's Studentized Range Test, two-way ANOVA and Weibull analysis. RESULTS: Mean peel/shear bond strength values range from 13.9 MPa for Allure Accu Arch, a ceramic bracket type, to 1.6 MPa for the plastic bracket CeramaFlex Advant Edge. Allure Accu Arch performed the best of all the ceramic brackets. However, bracket wing fracture was observed. The metal brackets Mini masters and Omni Arch showed no significant difference in bond strength compared with the ceramic bracket Allure Accu Arch (P < 0.01). CONCLUSION: The type of the bracket base determines its adhesive capacity. Sandblasting the base of recycled metal brackets had no uniform effect.     

Effect of moisture protective coatings on the strength of a modern metal-reinforced glass-ionomer cement

The strength of a modern, low metal:glass ratio, metal-reinforced glass-ionomer cement was measured evaluating a number of protective barriers: one light-cured resin, two solvent-based dental varnishes and petroleum jelly. The cement was exposed to water at 10 and 60 min from start of mix. The results obtained with these protecting agents were compared with those obtained where no protection was applied. A comparison of uniaxial flexural strength and biaxial flexural strength showed the latter to be more discriminating. Proprietary dental varnishes were superior to petroleum jelly, producing similar strengths of 50 MPa. Petroleum jelly was, however, preferable to no protection. Moisture protection during the first 30 min was found to be beneficial, thereafter no further strength increase was found. A second material, a cement which has a high metal:glass ratio, was found to be more moisture resistant but weaker in strength than the modern material, with a biaxial strength of 39 MPa.     

An investigation on the shear bond strength of one dentin adhesive at two different dentin depths

The aim of this investigation was to study the effect of dentin depth and patient's age on the shear bond strength of one dentin adhesive (ART Bond), using an Instron Universal testing machine at a cross-head speed of 0.5 mm/min. Forty human molar teeth were used and were divided into two main groups, twenty each representing two age groups of patients, i.e., between 20 to 30 years and between 30-40 years of age. Every group was further subdivided into two subgroups of different dentin depths, i.e., superficial and deep. Results were recorded in Kg/Cm2 and converted into MPa units, then tabulated and statistically analyzed. A Duncan's range statistic test at P < or = 0.05 showed statistically significant differences between the bond strength values for both age groups at different dentin depths, with the superficial dentin showing higher bond values, and there were also statistically significant differences between the bond strength values of the two age groups at the same dentin depth, with the older age group showing higher bond values.     

Effect of cement modulus on the shear properties of the bone-cement interface

Shear tests of the bone-cement interface were performed in vitro using two types of bone cement, standard poly(methyl methacrylate) (PMMA) and a reduced-modulus formulation with poly(butyl methacrylate) beads in a methyl methacrylate matrix (PBMMA). Tests of shear properties were also calculated on cancellous bone and on each cement alone. The tests were done using the Iosipescu shear test method which generates a pure shear force in a zero-moment section of the specimen. With this method, shear properties can be determined at specified locations throughout the specimen. Tests were performed across the entire interface region, specifically in the middle of the region of cement bone interdigitation and at both the bone and cement ends of that region. Ultimate shear strengths and shear moduli were calculated. The shear modulus of the PBMMA is less than 3% that of PMMA. The strength and modulus of cancellous bone had a direct relation to the apparent density of the bone, as did the strength and modulus of the bone-composite interface and the composite region. Strength and modulus were dictated by the bone at the bone-composite interface, and by the cement at the cement composite interface. Through the composite region, the stiffer of the two materials in the composite determined the shear properties. Reduced-modulus bone cement substantially decreases the interfacial shear stresses at the bone-cement interface which should decrease the rate of resorptive bone remodelling at this interface.     

Shear bond strength of amalgam adhesives to dentin

Recent studies have suggested that failure of pentamidine prophylaxis against Pneumocystis carinii pneumonia (PCP) may be due to reduced deposition of pentamidine in the upper lobes. In this study, we performed bronchoalveolar lavage from the apical segment of the upper lobe and the middle lobe in 51 HIV-positive patients, all of whom were receiving prophylaxis with aerosolized pentamidine, who had presented with acute respiratory symptoms. Lavage fluid from each lobe was assayed for pentamidine using high-performance liquid chromatography (HPLC). The number of clusters of P carinii were counted after staining with a Wright-Giemsa stain. The patients were subclassified as PCP-positive (32 patients) and PCP-negative (19 patients) on the basis of the presence/absence of P carinii clusters in their BAL fluid. The concentration of pentamidine in the upper lobe compared with the middle lobe was no different (using paired Student's t tests) for either PCP-positive patients or PCP-negative patients. In comparing the positive with the negative subjects, using unpaired Student's t test, there was no difference in the concentration of pentamidine in the upper lobe or the middle lobe. For PCP-positive patients, the numbers of P carinii clusters were on average higher in the upper lobes (mean +/- SD: upper = 14.9 +/- 16.6, middle 7.5 +/- 10.8, p = 0.013, paired Student's t test), but there was no correlation between lobar P carinii cluster counts and pentamidine levels. We conclude that the absence of a relationship between cluster count and pentamidine level, the similarity in regional pentamidine levels between upper and middle lobes, as well as the similarity in pentamidine levels between the PCP-positive and PCP-negative groups indicate that the regional dose of pentamidine is not the determining factor as to whether aerosolized pentamidine prophylaxis will succeed or fail.