Electrospun polylactide/silk fibroin–gelatin composite tubular scaffolds for small‐diameter tissue engineering blood vessels

Many synthetic scaffolds have been used as vascular substitutes for clinical use. However, many of these scaffolds may not show suitable properties when they are exposed to physiologic vascular environments, and they may fail eventually because of some unexpected conditions. Electrospinning technology offers the potential for controlling the composition, structure, and mechanical properties of scaffolds. In this study, a tubular scaffold (inner diameter = 4.5 mm) composed of a polylactide (PLA) fiber outside layer and a silk fibroin (SF)–gelatin fiber inner layer (PLA/SF–gelatin) was fabricated by electrospinning. The morphological, biomechanical, and biological properties of the composite scaffold were examined. The PLA/SF–gelatin composite tubular scaffold possessed a porous structure; the porosity of the scaffold reached 82 ± 2%. The composite scaffold achieved the appropriate breaking strength (1.28 ± 0.21 MPa) and adequate pliability (elasticity up to 41.11 ± 2.17% strain) and possessed a fine suture retention strength (1.07 ± 0.07 N). The burst pressure of the composite scaffold was 111.4 ± 2.6 kPa, which was much higher than the native vessels. A mitochondrial metabolic assay and scanning electron microscopy observations indicated that both 3T3 mouse fibroblasts and human umbilical vein endothelial cells grew and proliferated well on the composite scaffold in vitro after they were cultured for some days. The PLA/SF–gelatin composite tubular scaffolds presented appropriate characteristics to be considered as candidate scaffolds for blood vessel tissue engineering. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Mechanical modeling of silk fibroin/TiO2 and silk fibroin/fluoridated TiO2 nanocomposite scaffolds for bone tissue engineering

Biocompatible and biodegradable three-dimensional scaffolds are commonly porous which serve to provide suitable microenvironments for mechanical supporting and optimal cell growth. Silk fibroin (SF) is a natural and biomedical polymer with appropriate and improvable mechanical properties. Making a composite with a bioceramicas reinforcement is a general strategy to prepare a scaffold for hard tissue engineering applications. In the present study, SF was separately combined with titanium dioxide (TiO₂) and fluoridated titanium dioxide nanoparticles (TiO₂-F) as bioceramic reinforcements for bone tissue engineering purposes. At the first step, SF was extracted from Bombyx mori cocoons. Then, TiO₂ nanoparticles were fluoridated by hydrofluoric acid. Afterward, SF/TiO₂ and SF/TiO₂-F nanocomposite scaffolds were prepared by freeze-drying method to obtain a porous microstructure. Both SF/TiO₂ and SF/TiO₂-F scaffolds contained 0, 5, 10, 15 and 20 wt% nanoparticles. To evaluate the efficacy of nanoparticles addition on the mechanical properties of the prepared scaffolds, their compressive properties were assayed. Likewise, the pores morphology and microstructure of the scaffolds were investigated using scanning electron microscopy. In addition, the porosity and density of the scaffolds were measured according to the Archimedes’ principle. Afterward, compressive modulus and microstructure of the prepared scaffolds were evaluated and modeled by Gibson–Ashby’s mechanical models. The results revealed that the compressive modulus predicted by the mechanical model exactly corresponds to the experimental one. The modeling approved the honeycomb structure of the prepared scaffolds which possess interconnected pores.

     

Shape‐memory behaviors of electrospun chitosan/poly(ethylene oxide) composite nanofibrous membranes

With aim of constructing a class of functional environmentally friendly materials, we electrospun chitosan (CS) blends with various contents of poly(ethylene oxide) (PEO) into a series of composite nanofibrous membranes exhibiting shape‐memory behaviors. In the present composite system, CS and PEO served as hard and soft domains, respectively. The CS, presenting no thermal transition, and the PEO, with apparent melting–crystallization, were demonstrated by differential scanning calorimetry testing. Characterizations also revealed that the morphologies of the CS/PEO membranes were controlled by the mass ratios of CS/PEO. The composite fibrous membranes showed great mechanical performances and thermal stabilities as well. Moreover, CS/PEO possessed excellent shape‐memory behaviors. Such fibrous membranes could complete their shape‐recovery processes within 20 s at the temperature of 20°C above the melting transition temperature (T_m). Both the shape fixity and shape‐recovery ratios were higher than 90%, even after five cycles. The CS/PEO fibrous membranes present significant potential applications in the field of biotechnology and tissue engineering, such as in scaffolds and smart tubes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42532.     

Glutaraldehyde‐crosslinked chitosan/hydroxyapatite bone repair scaffold and its application as drug carrier for icariin

Chitosan/hydroxyapatite (CS/HA) bone repair scaffolds crosslinked by glutaraldehyde (GA) were prepared. Characterization of morphology, structure, mechanical property, and porosity of scaffolds were evaluated. The influences of CS viscosity, HA content, and crosslinking degree on properties of scaffolds were discussed. SEM images showed that CS/HA scaffolds were porous with short rod‐like HA particles dispersing evenly in CS substrate. When [η]_CS = 5.75 × 10^?4, HA content = 65%, and crosslinking degree = 10%, the resulting CS/HA scaffolds had a flexural strength of 20 MPa and porosity of 60%, which could meet the requirements of bone repair materials. The scaffolds were used as drug carriers for icariin, and the impacts of loading time and crosslinking degree of scaffolds on drug‐loading dose were discussed. The suitable loading time was 24 h and it would be better to keep crosslinking degree no more than 10%. The drug release behavior demonstrated that the icariin‐loading CS/HA scaffolds could achieve basic drug sustained release effect. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1539–1547, 2013     

Effects of micro and nano β‐TCP fillers in freeze‐gelled chitosan scaffolds for bone tissue engineering

Tissue engineering holds an exciting promise in providing a long‐term cure to bone‐related defects and diseases. However, one of the most important prerequisites for bone tissue engineering is an ideal platform that can aid tissue genesis by having biomimetic, mechanostable, and cytocompatible characteristics. Chitosan (CS) was chosen as the base polymer to incorporate filler, namely beta‐tri calcium phosphate (β‐TCP). This research deals with a comparative study on the properties of CS scaffolds prepared using micro‐ and nano‐sized β‐TCP as filler by freeze gelation method. The scaffolds were characterized for their morphology, porosity, swelling, structural, chemical, biodegradation, and bioresorption properties. Rheological behavior of polymer and polymer‐ceramic composite suspensions were analyzed and all the suspensions with varying ratios of β‐TCP showed non‐Newtonian behavior with shear thinning property. Pore size, porosity of micro‐ and nano‐sized composite scaffolds are measured as 48–158 μm and 77% and 43–155 μm and 81%, respectively. The scaffolds containing nano β‐TCP possess higher compressive strength (～2.67 MPa) and slower degradation rate as compared to composites prepared with micro‐sized β‐TCP (～1.52 MPa). Bioresorbability, in vitro cell viability by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay, proliferation by Alamar blue assay, cell interaction by scanning electron microscope, and florescence microscopy further validates the potentiality of freeze‐gelled CS/β‐TCP composite scaffolds for bone tissue engineering applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41025.     

Investigation of mechanical properties of porous composite scaffolds with tailorable degradation kinetics after in vitro degradation using digital image correlation

Tissue engineering combines artificial scaffolds and living cells in order to reconstruct damaged tissues and organs. The biodegradable scaffolds should maintain their mechanical properties during first stages of the regeneration. The aim of this study was to investigate the extent the degradation affects the mechanical stability of novel biodegradable composite scaffolds in relation to their composition. The scaffolds were made using fused deposition modeling. They were composed of ternary composites containing poly(ε‐caprolactone) (PCL), 5 wt% of tricalcium phosphate (TCP) and 5, 15, and 25 wt% of poly(lactide‐co‐glycolide) (PLGA). Scaffolds made of pristine PCL and binary composite PCL–TCP were tested as reference samples. The degradation experiment was carried out in simulated body fluid at 37°C for 12 weeks. Mechanical tests were carried out in a mechanical tester. Strain was measured using digital image correlation and crossbar displacement. Chemical composition had a significant effect on initial mechanical properties and their changes during degradation. The initial apparent Young's modulus of ternary composite scaffolds was two times higher than that of PCL–TCP. Higher PLGA concentration yielded faster decrease of the mechanical properties. At the end of the experiment, there were no significant differences of the modulus among all tested materials although degradation of the ternary composite scaffolds was significantly advanced. POLYM. COMPOS., 38:2402–2410, 2017. © 2015 Society of Plastics Engineers     

Chitosan/CaCO3 solvent‐free nanofluid composite membranes for direct methanol fuel cells

Natural polyelectrolyte chitosan (CS) has been considered to be a promising proton‐exchange membrane material for direct methanol fuel cells due to its low cost and excellent methanol barrier ability. To further improve the ionic conductivity and mechanical property of CS, calcium‐carbonate solvent‐free nanofluids (CaCO₃‐SF) with unique flow behavior were prepared by an ion‐exchange method, and then used a novel nanofiller to modify CS to fabricate composite membranes. The surface‐grafted organic long chains on the surface of CaCO₃ nanoparticles could promote the homogeneous dispersion of CaCO₃ in the CS matrix, and thus improve the interfacial bonding and facilitate the load transfer from the matrix to stiff CaCO₃. When the content of CaCO₃‐SF was 6 wt%, the tensile strength and fracture elongation of the composite membrane were 28.25 MPa and 17.17%, respectively, which increased by 25% and 36% when compared with those of pure membrane. Moreover, the ? SO₃H groups in the structure of organic long chains could form new proton transport sites, and thus enhance the proton conductivity of the membranes. Consequently, when compared with pure CS membrane (0.0131 S cm^?1), incorporation of 6 wt% CaCO₃‐SF (0.0250 S cm^?1) exhibited about onefold increase of proton conductivity. POLYM. ENG. SCI., 59:2128–2135, 2019. © 2019 Society of Plastics Engineers     

Green fabrication of porous chitosan/graphene oxide composite xerogels for drug delivery

Porous chitosan (CS)/graphene oxide (GO) composite xerogels were prepared through a simple and “green” freeze‐drying method. Scanning electron microscopy, Fourier transform infrared spectrometry, powder X‐ray diffraction, and compressive strength measurements were performed to characterize the microstructures and mechanical properties of as‐prepared composite xerogels. The results show that the incorporation of GO resulted in an observable change in the porous structure and an obvious increase in the compressive strength. The abilities of the composite xerogels to absorb and slowly release an anticancer drug, doxorubicin hydrochloride (DOX), in particular, the influence of different GO contents, were investigated systematically. The porous CS/GO composite xerogels exhibited efficient DOX‐delivery ability, and both the adsorption and slow‐release abilities increased obviously with increasing GO content. Additionally, the best adsorption concentration of DOX was 0.2 mg/mL, and the cumulative release percentage of DOX from the xerogels at pH4 much higher than that at pH 7.4. Therefore, such porous CS/GO composite xerogels could be promising materials as postoperation implanting stents for the design of new anticancer drug‐release carriers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40006.     

Preparation,characterization, and biodegradability of renewable resource‐based composites from recycled polylactide bioplastic and sisal fibers

The biodegradability, morphology, and mechanical thermal properties of composite materials composed of polylactide (PLA) and sisal fibers (SFs) were evaluated. Composites containing acrylic acid‐grafted PLA (PLA‐g‐AA/SF) exhibited noticeably superior mechanical properties because of greater compatibility between the two components. The dispersion of SF in the PLA‐g‐AA matrix was highly homogeneous as a result of ester formation and the consequent creation of branched and crosslinked macromolecules between the carboxyl groups of PLA‐g‐AA and hydroxyl groups in SF. Furthermore, with a lower melt temperature, the PLA‐g‐AA/SF composite is more readily processed than PLA/SF. Both composites were buried in soil to assess biodegradability. Both the PLA and the PLA‐g‐AA/SF composite films were eventually completely degraded, and severe disruption of film structure was observed after 6–10 weeks of incubation. Although the degree of weight loss after burial indicated that both materials were biodegradable even with high levels of SF, the higher water resistance of PLA‐g‐AA/SF films indicates that they were more biodegradable than those made of PLA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

3D mesoporous bioactive glass/silk/chitosan scaffolds and their compatibility with human adipose-derived stromal cells

Human adipose-derived stem/stromal cells (hASCs) have been popularly studied as cell-based therapy in the field of regenerative medicine due to their ability to differentiate into several cell types. In this study, in order to improve the mechanical strength and bioactivity of scaffolds for bone tissue engineering, three types of mesoporous bioactive glasses with different shapes and compositions were dispersed in the silk fibroin/chitosan (SF/CS)-based scaffolds, which were fabricated with a combination of freezing and lyophilization. The characteristic and physical properties of these composite scaffolds were evaluated. The biocompatibility was also assessed through hASCs in vitro tests. Both Alamar Blue® and Live/Dead assay® revealed that the spherical mesoporous bioactive glass doped scaffolds enhanced cell viability and proliferation. Furthermore, the addition of spherical mesoporous bioactive glass into SF/CS scaffolds encouraged hASC osteogenic differentiation as well. These results suggested that this composite scaffold can be applicable material for bone regeneration.     

Fabrication of co‐continuous poly(ε‐caprolactone)/polyglycolide blend scaffolds for tissue engineering

The apparent inability of a single biomaterial to meet all the requirements for tissue engineering scaffolds has led to continual research in novel engineered biomaterials. One method to provide new materials and fine‐tune their properties is via mixing materials. In this study, a biodegradable powder blend of poly(ε‐caprolactone) (PCL), polyglycolide (PGA), and poly(ethylene oxide) (PEO) was prepared and three‐dimensional interconnected porous PCL/PGA scaffolds were fabricated by combining cryomilling and compression molding/polymer leaching techniques. The resultant porous scaffolds exhibited co‐continuous morphologies with ～50% porosity. Mean pore sizes of 24 and 56 μm were achieved by varying milling time. The scaffolds displayed high mechanical properties and water uptake, in addition to a remarkably fast degradation rate. The results demonstrate the potential of this fabrication approach to obtain PCL/PGA blend scaffolds with interconnected porosity. In general, these results provide significant insight into an approach that will lead to the development of new composites and blends in scaffold manufacturing. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42471.     

Fabrication of a zirconia/calcium silicate composite scaffold based on digital light processing

Zirconia (ZrO₂) and calcium silicate (CS) are widely used in bone repair. Zirconia has excellent mechanical properties, while calcium silicate has exceptional biological activity. A porous ZrO₂/CS composite ceramic scaffold was formed by digital light processing (DLP) technology in this study. The microstructure analysis demonstrated that CS was embedded between ZrO₂ particles. Mechanical tests showed that interconnected CS particles could improve mechanical properties, while discrete CS particles led to a decrease in that. Cell experiments showed that adding CS to ZrO₂ had a positive effect on cell proliferation and differentiation. In vitro degradation test showed that the weight loss of scaffolds in four weeks increased form ?0.63%–1.42% with the increase of CS content. Moreover, the degradation of scaffold promoted the deposition of apatite, which was beneficial to the integration of the scaffold with living bone. In conclusion, the ZrO₂/CS composite scaffold had better biocompatibility compared with the ZrO₂ scaffold, which showed a potential solution for 3D printing bone repair scaffolds.     

Preparation,characterization, antibacterial properties,and hemostatic evaluation of ibuprofen‐loaded chitosan/gelatin composite films

Ibuprofen‐loaded chitosan/gelatin (CS/GE) composite films were fabricated in this work. The morphology of the composite film was investigated using scanning electron microscopy. The functional groups of the composite film before and after crosslinking were characterized using Fourier transform infrared spectroscopy. Meanwhile, the mechanical properties, antibacterial performance, cytocompatibility, and hemostatic activity of the composite films were investigated. The results show that the amount of CS affected the mechanical properties and liquid uptake capacities of the composite films. The composite film showed better bactericidal activity against Staphylococcus aureus than Escherichia coli. In vitro drug‐release evaluations showed that crosslinking could control the drug‐release rate and period in wound healing. Both types of CS/GE and drug‐loaded CS/GE composite films also showed excellent cytocompatibility in cytotoxicity assays. The hemostatic evaluation indicated that the composite film crosslinked by glutaraldehyde in rabbit livers had a dramatic hemostatic efficacy. Therefore, ibuprofen‐loaded CS/GE composite films are potentially applicable as a wound dressing material. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45441.     

Preparation and characterization of Chitosan and PLGA‐based scaffolds for tissue engineering applications

Three dimensional (3D) biodegradable porous scaffolds play a crucial role in bone tissue repair. In this study, four types of 3D polymer/hydroxyapatite (HAp) composite scaffolds were prepared by freeze drying technique in order to mimic the organic/inorganic nature of the bone. Chitosan (CH) and poly(lactic acid‐co‐glycolic acid) (PLGA) were used as the polymeric part and HAp as the inorganic component. Properties of the resultant scaffolds, such as morphology, porosity, degradation, water uptake, mechanical and thermal stabilities were examined. 3D scaffolds having interconnected macroporous structure and 77–89% porosity were produced. The pore diameters were in the range of 6 and 200 µm. PLGA and HAp containing scaffolds had the highest compressive modulus. PLGA maintained the strength by decreasing water uptake but increased the degradation rate. Scaffolds seeded with SaOs‐2 osteoblast cells showed that all scaffolds were capable of encouraging cell adhesion and proliferation. The presence of HAp particles caused an increase in cell number on CH‐HAp scaffolds compared to CH scaffolds, while cell number decreased when PLGA was incorporated in the structure. CH‐PLGA scaffolds showed highest cell number on days 7 and 14 compared to others. Based on the properties such as interconnected porosity, high mechanical strength, and in vitro cell proliferation, blend scaffolds have the potential to be applied in hard tissue treatments. POLYM. COMPOS., 36:1917–1930, 2015. © 2014 Society of Plastics Engineers     

Dual pH‐ and temperature‐responsive hydrogels with extraordinary swelling/deswelling behavior and enhanced mechanical performances

pH‐ and temperature‐responsive semi‐interpenetrating nanocomposite hydrogels (NC hydrogels) were prepared with surface‐functionalized graphene oxide (GO) as the crosslinker, N‐isopropylacrylamide (NIPAM) as the monomer, and chitosan (CS) as an additive. The effects of 3‐(trimethoxysilyl)propylmethacrylate‐modified GO sheets and CS content on various physical properties were investigated. Results show that PNIPAM/CS/GO hydrogels undergo a large volumetric change in response to temperature. Swelling ratios of PNIPAM/CS/GO hydrogels are much larger than those of the conventional organically crosslinked PNIPAM hydrogels. The deswelling test indicates that the deswelling rate was greatly enhanced by incorporating CS into the hydrogel network and using the surface‐functionalized GO as the crosslinker. The pH‐sensitivity of PNIPAM/CS/GO hydrogels is evident below their volume phase transition temperature. Moreover, the PNIPAM/CS/GO hydrogels have a much better mechanical property compared with traditional hydrogels even in a high water content of 90%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41530.     

Preparation and characterization of aliphatic polyurethane and hydroxyapatite composite scaffold

Novel porous composite scaffolds for tissue engineering were prepared from aliphatic biodegradable polyurethane (PU) elastomer and hydroxyapatite (HA). It was found that the aliphatic PU was possible to load up to 50 wt % HA. The morphology and properties of the scaffolds were characterized by scanning electron microscope, X‐ray diffraction, infrared absorption spectra, mechanical testing, dynamic mechanical analysis, and in vitro degradation measurement. The results indicated that the HA/PU scaffolds had an interconnected porous structure with a pore size mainly ranging from 300 to 900 μm, and 50–200 μm micropores existed on the pores' walls. The average pore size of macropores and micropores are 510 and 100 μm, respectively. The compressive strength of the composite scaffolds showed higher enhancement with increasing HA content. In addition, the polymer matrix was completely composed of aliphatic component and exhibited progressive mass loss in vitro degradation, and the degradation rate depended on the HA content in PU matrix. The porous HA/PU composite may have a good prospect to be used as scaffold for tissue engineering. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

In vitro hydrolysis and magnesium release of poly(d,l‐lactide‐co‐glycolide)‐based composites containing bioresorbable glasses and magnesium hydroxide

Magnesium is important for both bone growth and cartilage formation. However, the postoperative intake of antibiotics such as quinolones may cause a reduction in magnesium levels in tissue. The addition of magnesium to scaffolds may therefore be beneficial for the regeneration of osteochondral defects. In this study, porous composite scaffolds were produced by gas foaming of poly(d ,l ‐lactide‐co‐glycolide) (PLGA) rods with magnesium‐containing bioresorbable glasses and magnesium hydroxide as fillers. The in vitro hydrolytical degradation of the composite scaffolds in Tris buffer was followed over a 10‐week period. Mg²⁺ was released in a controlled manner from the scaffolds with varying release profiles between the different materials. Higher glass content resulted in a reduced mass loss compared to scaffolds with lower glass content. As a result of the foaming method, the scaffolds shrank initially, without evidence that the addition of hydrophilic fillers would decrease the initial shrinkage. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42646.     

Influence of hydrogen bonding interaction on the damping properties of poly(n‐butyl methacrylate)/small molecule hybrids

The hydrogen bonding interactions between poly(n‐butyl methacrylate) and a series of low molecular weight phenols containing two to four hydroxyl groups with different steric effects were investigated by differential scanning calorimetry and Fourier‐transform infrared spectroscopy. Results showed that the hydrogen bonding strength between the two components varies greatly according to the steric effects of the phenolic hydroxyl group. As the size of the group beside the hydroxyl increases, the hydrogen bond strength weakens. The glass transition temperature of binary hybrid systems was put into relation with the corresponding hydrogen bonding interaction strength. Strong hydrogen bonding strength increased T_g to higher values than that predicted by the linear additivity rule; by contrast, T_g of hybrid systems with weak hydrogen bonds showed linear changes. All of the samples showed linear variations at low concentrations of small molecules. The damping properties of five systems were analyzed by dynamic mechanical analysis. Either the loss factor or area of tan δ peak of the five systems increased compared with that of the pure polymer, thereby showing great improvements in the damping properties of the poly(n‐butyl methacrylate)/small molecule hybrid material. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41954.     

Chitosan/gelatin porous bone scaffolds made by crosslinking treatment and freeze‐drying technology: Effects of crosslinking durations on the porous structure,compressive strength,and in vitro cytotoxicity

In this study, freezing was used to separate a solute (polymer) and solvent (deionized water). The polymer in the ice crystals was then crosslinked with solvents, and this diminished the linear pores to form a porous structure. Gelatin and chitosan were blended and frozen, after which crosslinking agents were added, and the whole was frozen again and then freeze‐dried to form chitosan/gelatin porous bone scaffolds. Stereomicroscopy, scanning electron microscopy, compressive strength testing, porosity testing, in vitro biocompatibility, and cytotoxicity were used to evaluate the properties of the bone scaffolds. The test results show that both crosslinking agents, glutaraldehyde (GA) and 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide, were able to form a porous structure. In addition, the compressive strength increased as a result of the increased crosslinking time. However, the porosity and cell viability were not correlated with the crosslinking times. The optimal porous and interconnected pore structure occurred when the bone scaffolds were crosslinked with GA for 20 min. It was proven that crosslinking the frozen polymers successfully resulted in a division of the linear pores, and this resulted in interconnected multiple pores and a compressively strong structure. The 48‐h cytotoxicity did not affect the cell viability. This study successfully produced chitosan/gelatin porous materials for biomaterials application. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41851.     

Improvement of mechanical characteristics of glycidyl azide polymer binder system by addition of flexible polyether

Two kinds of flexible chain polymer, poly(ethylene oxide‐co‐tetrahydrofuran) (P(EO‐co‐THF)) and polyalkylene oxide (PAO), were chosen to improve the mechanical properties of the network of glycidyl azide polymer (GAP)–based elastomers. The mechanical properties of the GAP binder system at 25 and −40 °C can be improved effectively. The effects of P(EO‐co‐THF) and PAO on the network parameters, hydrogen bonding effect, and crystallization property were studied to determine the enhancement mechanism. Based on the results, it can be concluded that for copolyurethane elastomers prepared with PAO content less than 15 wt % and P(EO‐co‐THF), the mechanical properties were enhanced by the reduction of bulk side groups in GAP, which improved the chemical crosslinking density, hydrogen bonding effect in elastomers, and the motility of the molecular chains, while for elastomers prepared with more than 15 wt % PAO, the crystallization of the PAO segments played a major role in the improvement of mechanical properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43840.