Fabrication and characterization of PEO/PPC polymer electrolyte for lithium‐ion battery

A new poly(propylene carbonate)/poly(ethylene oxide) (PEO/PPC) polymer electrolytes (PEs) have been developed by solution‐casting technique using biodegradable PPC and PEO. The morphology, structure, and thermal properties of the PEO/PPC polymer electrolytes were investigated by scanning electron microscopy, X‐ray diffraction, and differential scanning calorimetry methods. The ionic conductivity and the electrochemical stability window of the PEO/PPC polymer electrolytes were also measured. The results showed that the T_g and the crystallinity of PEO decrease, and consequently, the ionic conductivity increases because of the addition of amorphous PPC. The PEO/50%PPC/10%LiClO₄ polymer electrolyte possesses good properties such as 6.83 × 10^?5 S cm^?1 of ionic conductivity at room temperature and 4.5 V of the electrochemical stability window. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Ionic conductivity of solid polymer electrolytes for dye‐sensitized solar cells

We developed an ionic conductivity model of solid polymer electrolytes for dye‐sensitized solar cells (DSSCs) based on the Nernst–Einstein equation in which the diffusion coefficient is derived from the molecular thermodynamic model. We introduced concentration‐dependence of the diffusion coefficient into the model, and the diffusion coefficient was expressed by differentiating the chemical potential by concentration. The ionic conductivities of polymer electrolytes (PEO/LiI/I₂ system) were investigated at various temperatures and compositions. We prepared a set of PEO in which an EO : LiI mole ratio of 10 : 1 was kept constant for PEO·LiI·(I₂)_n compositions with n = 0.02, 0.05, 0.1, 0.15, 0.2, and 0.3 (mole ratio of LiI : I₂). The ionic conductivities of the electrolytes were measured using a stainless steel/polymer‐electrolyte/stainless steel sandwich‐type electrode structure using alternating current impedance analysis. The values calculated using the proposed model agree well with experimental data. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Structural and dielectric studies of amorphous and semicrystalline polymers blend‐based nanocomposite electrolytes

The solid polymeric nanocomposite electrolyte (SPNE) films based on the blend of amorphous poly(methyl methacrylate) (PMMA) and semicrystalline poly(ethylene oxide) (PEO) (PMMA:PEO = 80:20 wt %) doped with lithium perchlorate (LiClO₄) salt and montmorillonite (MMT) clay nanofiller were prepared by classical solution cast, ultrasonic assisted solution cast and ultrasonication along with microwave irradiated solution cast followed by melt‐pressing methods. The X‐ray diffraction study of these electrolytes revealed the amorphous behavior with intercalated MMT structures. The suppressed crystallinity of PEO in the blend electrolyte complexes confirmed the existence of single discrete PEO chains confined within the PMMA domains. The dielectric relaxation spectroscopy of these materials was performed over the frequency range 20 Hz to 1 MHz, at ambient temperature. The presence of a singular relaxation peak in the loss tangent and electric modulus spectra of these electrolytes confirms a coupled cooperative chain segmental dynamics of the blend polymer owing to their miscible amorphous morphology. The behavior of transient complexes formed between the polymers functional groups, lithium cations and the intercalated MMT nanoplatelets was explored. The ambient temperature ionic conductivity of these electrolytes depends on the structural dynamics and the sample preparation methods. It is revealed that the presence of PEO in the PMMA matrix mainly governs the structural, dielectric, and ionic properties of these SPNE films. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41311.     

Composite polymer electrolytes based on electrospun thermoplastic polyurethane membrane and polyethylene oxide for all‐solid‐state lithium batteries

To improve the electrochemical properties and enhance the mechanical strength of solid polymer electrolytes, series of composite polymer electrolytes (CPEs) were fabricated with hybrids of thermoplastic polyurethane (TPU) electrospun membrane, polyethylene oxide (PEO), SiO₂ nanoparticles and lithium bis(trifluoromethane)sulfonamide (LiTFSI). The structure and properties of the CPEs were confirmed by SEM, XRD, DSC, TGA, electrochemical impedance spectroscopy and linear sweep voltammetry. The TPU electrospun membrane as the skeleton can improve the mechanical properties of the CPEs. In addition, SiO₂ particles can suppress the crystallization of PEO. The results show that the TPU‐electrospun‐membrane‐supported PEO electrolyte with 5 wt% SiO₂ and 20 wt% LiTFSI (TPU/PEO‐5%SiO₂‐20%Li) presents an ionic conductivity of 6.1 × 10^?4 S cm^?1 at 60 °C with a high tensile strength of 25.6 MPa. The battery using TPU/PEO‐5%SiO₂‐20%Li as solid electrolyte and LiFePO₄ as cathode shows an attractive discharge capacity of 152, 150, 121, 75, 55 and 26 mA h g^?1 at C‐rates of 0.2C, 0.5C, 1C, 2C, 3C and 5C, respectively. The discharge capacity of the cell remains 110 mA h g^?1 after 100 cycles at 1C at 60 °C (with a capacity retention of 91%). All the results indicate that this CPE can be applied to all‐solid‐state rechargeable lithium batteries. © 2018 Society of Chemical Industry     

Synthesis and characterization of proton conducting polymer electrolyte based on poly(N‐vinyl pyrrolidone)

This work aims at developing and characterizing a proton conducting polymer electrolyte based on Poly(N‐vinyl pyrrolidone) (PVP) doped with ammonium bromide (NH₄Br). Proton conducting polymer electrolytes based on PVP doped NH₄Br in different molar ratios have been prepared by solution casting technique using distilled water as solvent. The XRD pattern confirms the dissociation of salt. The FTIR analysis confirms the complex formation between the polymer and the salt. The conductivity analysis shows that the polymer electrolyte with 25 mol % NH₄Br has the highest conductivity equal to 1.06 × 10^?3 S cm^?1 at room temperature. Also it has been observed that the activation energy evaluated from the Arrhenius plot is low (0.50 eV) for 25 mol % NH₄Br doped polymer electrolyte. The influence of salt concentration on dc conductivity and activation energy of the polymer electrolyte has been discussed. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Blending poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) as composite polymer electrolyte

A blend of poly(methyl methacrylate) (PMMA) and poly(styrene‐co‐acrylonitrile) (PSAN) has been evaluated as a composite polymer electrolyte by means of differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, ac impedance measurements, and linear sweep voltammetry (LSV). The blends show an interaction with the Li⁺ ions when complexed with lithium perchlorate (LiClO₄), which results in an increase in the glass‐transition temperature (T_g) of the blends. The purpose of using PSAN as another component of the blend is to improve the poor mechanical properties of PMMA‐based plasticized electrolytes. The mechanical property is further improved by introducing fumed silica as inert filler, and hence the liquid electrolyte uptake and ionic conductivity of the composite systems are increased. Room‐temperature conductivity of the order of 10^?4 S/cm has been achieved for one of the composite electrolytes made from a 1/1 blend of PSAN and PMMA containing 120% liquid electrolyte [1M LiClO₄/propylene carbonate (PC)] and 10% fumed silica. These systems also showed good compatibility with Li electrodes and sufficient electrochemical stability for safe operation in Li batteries. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1319–1328, 2001     

Application of polymer gel electrolyte with graphite powder in quasi‐solid‐state dye‐sensitized solar cells

A polymer gel electrolyte with ionic conductivity of 5.11 mS cm⁻¹ was prepared by using poly (acrylonitrile‐co‐styrene) as polymer matrix, acetonitrile and tetrahydrofuran as binary organic mixture solvent, NaI + I₂ as electrolyte, graphite powder and 1‐methylimidazole as additives. The components ratio of the polymer gel electrolyte was optimized, and the influence of the components and temperature on the ionic conductivity of the polymer gel electrolyte and photoelectronic properties of dye sensitized solar cell were investigated. On the basis of the polymer gel electrolyte with the optimized conditions, a quasi‐solid‐state dye‐sensitized solar cell was fabricated and its light‐ to‐electricity energy conversion efficiency of 3.25% was achieved under irradiation of 100 mW cm⁻². POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Study of a new polymer electrolyte poly(ethylene oxide): NaClO3 with several plasticizers for battery application

Sodium ion conducting thin film polymer electrolytes based on poly(ethylene oxide) (PEO) complexed with NaClO₃ were prepared by a solution‐casting method. Characterization by XRD, IR spectroscopy and AC conductivity has been carried out on these thin film electrolytes to analyse their properties. The conductivity studies show that the conductivity value of PEO:NaClO₃ complex increases with the increase in salt concentrations. Increase in conductivity was found in the electrolyte system by the addition of low molecular weight polymer poly(ethylene glycol) (PEG) and the organic solvents dimethylformamide (DMF) and propylene carbonate (PC). Using these electrolyte systems, cell parameters were measured from the discharge study with the application of load 100 kΩ at room temperature with common cell configuration Na|electrolyte|C:I₂:electrolyte. The open circuit voltage (OCV) ranges from 2.81 to 3.23 V and the short circuit current (SCC) ranges from 340 to 1180 µA. © 2001 Society of Chemical Industry     

Morphology and electrochemical and mechanical properties of polyethylene‐oxide‐based nanofibrous electrolytes applicable in lithium ion batteries

We report the synthesis of all‐solid‐state polymeric electrolytes based on electrospun nanofibers. These nanofibers are composed of polyethylene oxide (PEO) as the matrix, lithium perchlorate (LiClO₄) as the lithium salt and propylene carbonate (PC) as the plasticizer. The effects of the PEO, LiClO₄ and PC ratios on the morphological, mechanical and electrochemical characteristics were investigated using the response surface method (RSM) and analysis of variance test. The prepared nanofibrous electrolytes were characterized using SEM, Fourier transform infrared, XRD and DSC analyses. Conductivity measurements and tensile tests were conducted on the prepared electrolytes. The results show that the average diameter of the nanofibers decreased on reduction of the PEO concentration and addition of PC and LiClO₄. Fourier transport infrared analysis confirmed the complexation between PEO and the additives. The highest conductivity was 0.05 mS cm^?1 at room temperature for the nanofibrous electrolyte with the lowest PEO concentration and the highest ratio of LiClO₄. The optimum nanofibrous electrolyte showed stable cycling over 30 cycles. The conductivity of a polymer film electrolyte was 29 times lower than that of the prepared nanofibrous electrolyte with similar chemical composition. Furthermore, significant fading in mechanical properties was observed on addition of the PC plasticizer. The results obtained imply that further optimization might lead to practical uses of nanofibrous electrolytes in lithium ion batteries. © 2019 Society of Chemical Industry     

Solid‐state single‐ion conducting comb‐like siloxane copolymer electrolyte with improved conductivity and electrochemical window for lithium batteries

Achievement of high conductivity and electrochemical window at ambient temperature for an all‐solid polymer electrolyte used in lithium ion batteries is a challenge. Here, we report the synthesis and characterization of a novel solid‐state single‐ion electrolytes based on comb‐like siloxane copolymer with pendant lithium 4‐styrenesulfonyl (perfluorobutylsulfonyl) imide and poly(ethylene glycol). The highly delocalized anionic charges of ? SO₂? N^(–)? C₄F₉ have a weak association with lithium ions, resulting in the increase of mobile lithium ions number. The designed polymer electrolytes possess ultra‐low glass transition temperature in the range from ?73 to ?54 °C due to the special flexible polysiloxane. Promising electrochemical properties have been obtained, including a remarkably high conductivity of 3.7 × 10^?5 S/cm and electrochemical window of 5.2 V (vs. Li⁺/Li) at room temperature. A high lithium ion transference number of 0.80, and good compatibility with anode were also observed. These prominent characteristics endow the polymer electrolyte a potential for the application in high safety lithium ion batteries. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45848.     

Preparation and performance analysis of barium titanate incorporated in corn starch‐based polymer electrolytes for electric double layer capacitor application

Polymer electrolyte membranes composing of corn starch as host polymer, lithium perchlorate (LiClO₄) as salt, and barium titanate (BaTiO₃) as composite filler are prepared using solution casting technique. Ionic conductivity is enhanced on addition of BaTiO₃ by reducing the crystallinity and increasing the amorphous phase content of the polymer electrolyte. The highest ionic conductivity of 1.28 × 10^?2 S cm^?1 is obtained for 10 wt % BaTiO₃ filler in corn starch‐LiClO₄ polymer electrolytes at 75°C. Glass transition temperature (T_g) of polymer electrolytes decreases as the amount of BaTiO₃ filler is increased, as observed in differential scanning calorimetry analysis. Scanning electron microscopy and thermogravimetric analysis are employed to characterize surface morphological and thermal properties of BaTiO₃‐based composite polymer electrolytes. The electrochemical properties of the electric double‐layer capacitor fabricating using the highest ionic conductivity polymer electrolytes is investigated using cyclic voltammetry and charge‐discharge analysis. The discharge capacitance obtained is 16.22 F g^?1. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43275.     

Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

New type of lithium poly(polyfluoroalkoxy)sulfonylimides as salts for PEO‐based solvent‐free electrolytes

A new type of lithium salts, —SO₂NLiSO₂OCH₂(CF₂)_nCH₂O_m— (LiPPFASI, where n = 2, 3, 4, 6, and 7), was used as salts in poly(ethylene oxide) (PEO)‐based solvent‐free electrolytes. The conductivity and electrochemical stability behaviors were studied. The results showed the electrolytes almost have a similar conductivity and the PEO–LiPPFASI (n = 3, EO/Li = 10) was the relatively better system under the experiment conditions. Moreover, most systems were found to be oxidatively stable up to 5.5 V versus Li/Li⁺ and the lithium deposition‐stripping process on the electrode was reversible for all the polymer electrolytes. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1882–1885, 2001     

Effect of plasticizers in poly(vinyl alcohol)‐based hybrid solid polymer electrolytes

Hybrid solid polymer electrolyte films consisting of poly(vinyl alcohol) (PVA), poly(methyl methacrylate) (PMMA), LiBF₄, and ethylene carbonate/propylene carbonate (EC/PC) were prepared with a solvent‐casting technique. The complexation was investigated with Fourier transform infrared and X‐ray diffraction. The ionic conductivities of the electrolyte films were determined with an alternating‐current impedance technique for various temperatures in the range of 302–373 K. The maximum conductivity value, 1.2886 × 10^?3 S/cm, was observed for a PVA–PMMA–LiBF₄–EC complex. Thermogravimetry/differential thermal analysis was performed to ascertain the thermal stability of the electrolyte with the maximum conductivity value. For an examination of the cyclic and reversible performance of the film, a cyclic voltammetry study was carried out. The surface morphology of the EC‐and PC‐based electrolytes was examined with scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2794–2800, 2003     

Preparation and ionic conductivity of solid polymer electrolyte based on polyacrylonitrile‐polyethylene oxide

The transparent and flexible solid polymer electrolytes (SPEs) were fabricated from polyacrylonitrile‐polyethylene oxide (PAN‐PEO) copolymer which was synthesized by methacrylate‐headed PEO macromonomer and acrylonitrile. The formation of copolymer is confirmed by Fourier‐transform infrared spectroscopy (FTIR) measurements. The ionic conductivity was measured by alternating current (AC) impedance spectroscopy. Ionic conductivity of PAN‐PEO‐LiClO₄ complexes was investigated with various salt concentration, temperatures and molecular weight of PEO (Mn). And the maximum ionic conductivity at room temperature was measured to be 3.54 × 10^?4 S/cm with an [Li⁺]/[EO] mole ratio of about 0.1. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 461–464, 2006     

Proton‐conducting gel polyelectrolytes based on Lewis acid

A novel proton‐gel‐conducting polymer electrolyte was prepared by blending boron trifluoride diethyl etherate with poly(ethylene oxide) (PEO), glycerol, and propylene carbonate (PC) at certain molar ratios. The electrolytes exhibited ambient conductivity from 10^?5 to 10^?3 S/cm. DSC results indicated that the electrolytes were amorphous. The ¹H‐NMR and Raman spectra showed strong interactions between the Lewis acid and the hydroxyl groups both of glycerol and of PEO. This resulted in the formation of protons for ionic conduction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1267–1272, 2003     

Physical and electrochemical characterizations of poly(vinylidene fluoride‐co‐hexafluoropropylene)/SiO2‐based polymer electrolytes prepared by the phase‐inversion technique

Highly porous poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVdF–HFP)‐based polymer membranes filled with fumed silica (SiO₂) were prepared by a phase‐inversion technique, and films were also cast by a conventional casting method for comparison. N‐Methyl‐2‐pyrrolidone as a solvent was used to dissolve the polymer and to make the slurry with SiO₂. Phase inversion occurred just after the impregnation of the applied slurry on a glass plate into flowing water as a nonsolvent, and then a highly porous structure developed by mutual diffusion between the solvent and nonsolvent components. The PVdF–HFP/SiO₂ cast films and phase‐inversion membranes were then characterized by an examination of the morphology, thermal and crystalline properties, absorption ability of an electrolyte solution, ionic conductivity, electrochemical stability, and interfacial resistance with a lithium electrode. LiPF₆ (1M) dissolved in a liquid mixture of ethylene carbonate and dimethyl carbonate (1:1 w/w) was used as the electrolyte solution. Through these characterizations, the phase‐inversion polymer electrolytes were proved to be superior to the cast‐film electrolytes for application to rechargeable lithium batteries. In particular, phase‐inversion PVdF–HFP/SiO₂ (30–40 wt %) electrolytes could be recommended to have optimum properties for the application. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 140–148, 2006     

Effects of polymer matrix and salt concentration on the ionic conductivity of plasticized polymer electrolytes

Two polar polymers with different dielectric constants, poly(vinylidene fluoride) (PVDF) and poly(ethylene oxide) (PEO), were each blended with a chlorine-terminated poly(ethylene ether) (PEC) and one of the two salts, LiBF₄ and LiCF₃CO₂, to form PEC plasticized polymer electrolytes. The room-temperature ionic conductivity of the PEC plasticized polymer electrolytes reached a value as high as 10^?4 S/cm. The room-temperature ionic conductivity of the PVDF-based polymer electrolytes displayed a stronger dependence on the PEC content than did the PEO-based polymer electrolytes. In PVDF/PEC/LiBF₄ polymer electrolytes, the dynamic ionic conductivity was less dependent on temperature and more dependent on the PEC content than it was in PEO/PEC/LiBF₄ polymer electrolytes. The highly plasticized PVDF-based polymer electrolyte film with a PEC content greater than CF4 (CF4 defined as the molar ratio of the repeat units of PEC to those of PVDF equal to 4) was self-supported and nonsticky, while the corresponding PEO-based polymer electrolyte film was sticky. In these highly plasticized PVDF-based polymer electrolytes, the curves of the room-temperature ionic conductivity vs. the salt concentration were convex because the number of carrier ions and the chain rigidity both increased with increase of the salt content. The maximum ionic conductivity at 30°C was independent of the PEC content, but it depended on the anion species of the lithium salts in these highly plasticized polymer electrolytes. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of novel crosslinked polyurethane–acrylate electrolyte

Flexible, transparent, and crosslinked polymer films were synthesized by polymerization of PEG‐modified urethane acrylate using a simple method. A series of novel solid polymer electrolytes and gel electrolytes were prepared based on this type of polymer film. To understand the interactions among salt, solvent, and polymer, the swelling behaviors of the crosslinked polymer in pure propylene carbonate (PC) and liquid electrolyte solutions (LiClO₄/PC) were investigated. The results showed that the swelling rate in the electrolyte solution containing moderate LiClO₄ was greater than that in pure PC. Thermogravimetric analysis (TGA) also supported the interaction between the solvent and polymer. The morphology and crystallinity of the crosslinked polymer and polymer electrolytes were studied using atomic force microscopy (AFM) and wide‐angle X‐ray diffraction (WAXD) spectroscopy. The effects of the content of the electrolyte solution on the ionic conductivity of gel electrolytes were explored. The dependence of the conductivity on the amount of the electrolyte solution was nonlinear. With a different content of the plasticizer, the ionic conduction pathway of the polymer electrolytes would be changed. The best ionic conductivity of the gel electrolytes, which should have good mechanical properties, was 4 × 10^r?3 S cm^?1 at 25°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 340–348, 2003     

Novel amphiphilic polymer gel electrolytes based on (PEG‐b‐GMA)‐co‐MMA

Amphiphilic conetwork–structured copolymers containing different lengths of ethylene oxide (EO) chains as ionophilic units and methyl methacrylate (MMA) chains as ionophobic units were prepared by free radical copolymerization and characterized by FTIR and thermal analysis. Polymer gel electrolytes based on the copolymers complexed with liquid lithium electrolytes (dimethyl carbonate (DMC) : diethyl carbonate (DEC) : ethylene carbonate (EC) = 1 : 1 : 1 (W/W/W), LiPF₆ 1.0M) were characterized by differential scanning calorimetry and impedance spectroscopy. A maximum ion conductivity of 4.27 × 10^?4 S/cm at 25^oC was found for the polymer electrolyte based on (PEG2000‐b‐GMA)‐co‐MMA with long EO groups. Moreover, the effect of temperature on conductivity of the amphiphilic polymer electrolytes obeys the Arrhenius equation. The good room temperature conductivity of the polymer electrolytes is proposed to relate to the enhancement in the amorphous domain of the copolymers due to their amphiphilic conetwork structure. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010