Adsorption of ammonium and nitrate ions by poly(N‐isopropylacrylamide) gel and poly(N‐isopropylacrylamide‐co‐chlorophyllin) gel in different states

The adsorption of ammonium and nitrate by temperature‐stimulus‐responsive poly(N‐isopropylacrylamide) (NIPA) gel and poly(N‐isopropylacrylamide‐co‐chlorophyllin) (NIPA‐CH) gel in different states was investigated. Both the NIPA gel and NIPA‐CH gel could adsorb ammonium and nitrate in a swollen state (swollen gel) and a swelling state (swelling gel), and they adsorbed ammonium more than nitrate. When the gels were shrinking (shrinking gel), they could adsorb a little ammonium from solution, but when the gels were in a shrunken state (shrunken gel), they hardly adsorbed ammonium. The adsorption of both ammonium and nitrate increased for the swelling NIPA gel in comparison with the swollen gel. The NIPA‐CH gel was the opposite in this respect. The difference in the amounts of adsorption of ammonium and nitrate by the swollen and swelling NIPA‐CH gels was more significant than that of the NIPA gels. It was suggested that ions such as ammonium and nitrate could not diffuse into the gels freely. The adsorption of ammonium and nitrate was affected not only by the phase transitions of the gels but also by the electrical charges. The experimental results for the adsorption of ammonium and nitrate during the volume changes of the gels imply that if the gels are applied to the immobilization of microorganisms, they may improve mass transfer between the immobilization matrix and bulk liquid under cyclic temperature changes and promote reactions of the immobilized microorganisms, especially the nitrification of nitrifying bacteria immobilized by the NIPA‐CH gel. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2367–2372, 2005     

Vesicular and micellar self‐assembly of stimuli‐responsive poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) amphiphilic diblock copolymers

Dually responsive amphiphilic diblock copolymers consisting of hydrophilic poly(N‐isopropyl acrylamide) [poly(NIPAAm)] and hydrophobic poly(9‐anthracene methyl methacrylate) were synthesized by reversible addition fragmentation chain‐transfer (RAFT) polymerization with 3‐(benzyl sulfanyl thiocarbonyl sulfanyl) propionic acid as a chain‐transfer agent. In the first step, the poly(NIPAAm) chain was grown to make a macro‐RAFT agent, and in the second step, the chain was extended by hydrophobic 9‐anthryl methyl methacrylate to yield amphiphilic poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) block copolymers. The formation of copolymers with three different hydrophobic block lengths and a fixed hydrophilic block was confirmed from their molecular weights. The self‐assembly of these copolymers was studied through the determination of the lower critical solution temperature and critical micelle concentration of the copolymers in aqueous solution. The self‐assembled block copolymers displayed vesicular morphology in the case of the small hydrophobic chain, but the morphology gradually turned into a micellar type when the hydrophobic chain length was increased. The variations in the length and chemical composition of the blocks allowed the tuning of the block copolymer responsiveness toward both the pH and temperature. The resulting self‐assembled structures underwent thermally induced and pH‐induced morphological transitions from vesicles to micelles and vice versa in aqueous solution. These dually responsive amphiphilic diblock copolymers have potential applications in the encapsulation of both hydrophobic and hydrophilic drug molecules, as evidenced from the dye encapsulation studies. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46474.     

Fabrication of thermoresponsive,core‐crosslinked micelles based on poly[N‐isopropyl acrylamide‐co‐3‐(trimethoxysilyl)propylmethacrylate]‐b‐poly{N‐[3‐(dimethylamino)propyl]methacrylamide} for the codelivery of doxorubicin and nucleic acid

Thermoresponsive amphiphilic copolymer, poly[N‐isopropyl acrylamide‐co‐3‐(trimethoxysilyl)propylmethacrylate]‐b‐poly{N‐[3‐(dimethylamino)propyl]methacrylamide} with a branched structure was designed and synthesized by consecutive reversible addition–fragmentation chain‐transfer polymerization. The further hydrolysis of trimethoxysilyl functions in 3‐(trimethoxysilyl) propyl methacrylate units led to the fabrication of core‐crosslinked (CCL) micelles with silica crosslinks at temperatures above the lower critical solution temperature of the poly(N‐isopropyl acrylamide) block. The thermally induced structural and morphological changes of the CCL micelles in aqueous solution were investigated by transmission electron microscopy and ¹H‐NMR analyses. The resulting CCL micelles were further explored as nanocarriers for the codelivery of an anticancer drug and nucleic acid for enhanced therapeutic efficacy. The CCL micelles effectively condensed the nucleic acid and mediated higher gene transfer in the presence of serum than in serum‐free transduction. A cytotoxicity study revealed that whereas the pure CCL micelles exhibited unapparent cytotoxicity, the codelivery of p53 and doxorubicin with the CCL micelle formulation resulted in better treatment efficiency than sole chemotherapy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41752.     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Multidimensionally stimuli‐responsive phase transition of aqueous solutions of poly((N,N‐dimethylamino)ethyl methacrylate) and poly(N,N‐dimethyl‐N‐(methacryloyl)ethyl ammonium butane sulfonate)

Free radical polymerization of N,N‐(dimethylamino)ethyl methacrylate and N,N‐dimethyl‐N‐(methacryloyloxy)ethyl ammonium butane sulfonate was carried out to prepare PDMAEMA and PDMABS. Proton nuclear magnetic resonance spectroscopy indicated that both PDMAEMA and PDMABS exhibited an electrolyte‐responsive conformational dynamics in D₂O of different ionic strength. PDMAEMA, as a polybase, and PDMABS, as a polysulfobetaine, exhibited a series of multidimensional stimuli‐responsive phase transition behaviors. Adding NaCl would decrease the phase transition temperature (T_PT) of their aqueous mixtures, because of polyelectrolyte effect for PDMAEMA and anti‐polyelectrolyte effect for PDMABS, respectively. For PDMAEMA, a low pH would facilitate the dissolution; on the other hand, for PDMABS, a maximum T_PT was achieved in neutral media. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Volume phase transition behavior of N‐isopropyl acrylamide–N‐cyanomethyl acrylamide copolymer gel particles: The effect of crosslinking density

We prepared submicron‐sized N‐isopropyl acrylamide (NIPA)–N‐cyanomethyl acrylamide (NCMA) copolymer gel particles by precipitation polymerization. Volume phase transition behaviors of gel particles with various compositions and crosslinking density were observed by using photon correlation spectroscopy (PCS). The experimental data showed that both the volume transition temperature and the swelling ratio of copolymer gel particles were varied with the mole ratio of NCMA and NIPA. We compared the swelling behaviors of given systems with the thermodynamic model based on the extended Flory–Huggins theory. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1091–1099, 1999     

Development of environmentally responsive hydrogels with metal affinity behavior

This work describes initial efforts to incorporate affinity ligands within an environmentally responsive hydrogel. Metal affinity ligands were chosen as model affinity groups and thermally responsive N‐isopropyl acrylamide/acrylamide copolymers were used as the base hydrogels. The ? NH₂ group of the acrylamide serves as a reactive group for functionalization with metal affinity ligands. The gels were synthesized by free radical polymerization and Cu²⁺ was bound to the gel via 1,4‐butanediol diglycidyl ether (BDE) as a linker and iminodiacetic acid (IDA) as a chelating ligand. The base acrylamide gels were also functionalized with metal affinity ligands to allow for comparison with thermally responsive affinity gels. The results show the effectiveness of this technique for both these types of gels, and an improved method to immobilize metal affinity groups on to thermally sensitive N‐isopropyl acrylamide gels was also developed. It was seen that the yields for the reaction with BDE decreased with increased reaction time in both kinds of gels, whereas reaction with IDA showed a decrease in yields with increase in temperature for N‐isoporpyl acrylamide gels and increase in yields for acrylamide gels. Further techniques were developed to overcome diffusional resistances and stresses in the thermally responsive N‐isopropyl acrylamide gels so as to improve the distribution of Cu²⁺ ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Kinetic analysis of poly(N‐isopropylacrylamide‐co‐dimethylaminoethyl methacrylate) microgel latex formation

Curves of the conversion and particle size versus the time in the preparation of poly(N‐isopropylacrylamide‐co‐dimethylaminoethyl methacrylate) microgel latices by surfactant‐free emulsion polymerization were measured. The copolymerization reactions were rapid, and their rates increased with the dimethylaminoethyl methacrylate (DMAEMA) concentration in the polymerization recipe. Particle formation occurred by a homogeneous nucleation mechanism, in which DMAEMA helped to colloidally stabilize the primary particles. In addition, a strong dependence of the water‐soluble‐polymer (WSP) formation on the DMAEMA concentration was found, and the DMAEMA content in the WSP was significantly higher than that in the microgel particle. A drastic variation of the crosslinking density within the microgel particle during the polymerization process was found through a comparison of the particle size determined by quasi‐elastic light scattering with that determined by transmission electron microscopy. Finally, on the basis of these results, the mechanism of particle formation in this polymerization process was examined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 839–846, 2004     

Thermosensitive copolymer synthesized by controlled living radical polymerization: Phase behavior of diblock copolymers of poly(N‐isopropyl acrylamide) families

In this study, we prepared a series of thermosensitive polymers with low polydispersity index (PDI) values by nitroxide‐mediated controlled radical polymerization (NMRP) with 2,2,6,6‐tetramethyl‐1‐piperdinyloxy nitroxide (TEMPO) as a stable nitroxide‐free radical. Poly(N‐isopropyl acrylamide) (PNIPAAm)‐block‐poly(N‐tert‐butyl acrylamide) (PNTBA) was successfully synthesized, first, through polymerization with N‐isopropyl acrylamide to obtain the reactive polymer PNIPAAm‐TEMPO and, second, through polymerization by the addition of N‐tert‐butyl acrylamide (NTBA). The added molar fraction of NTBA during the second polymerization was adjusted accordingly to obtain the final polymerization product, a thermosensitive polymer (PNIPAAm‐block‐PNTBA), which had a targeted lower critical solution temperature (LCST). The result shows that the synthesis method used in this study effectively controlled the formation of the polymer to obtain a low PDI. The thermosensitive block copolymer, PNIPAAm‐b‐PNTBA (molar ratio = 9:1), with LCSTs in the range 27.7–39.8°C, was obtained through controlled living radical polymerization with PNIPAAm–TEMPO. Specifically, the 5 wt % aqueous solution of PNIPAAm‐b‐PNTBA (molar ratio = 9:1) had an LCST of 37.4°C; this was close to body temperature, 37°C. The 5 wt % aqueous solution of PNIPAAm‐b‐PNTBA (molar ratio = 9:1) showed potential for use in biomedical applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43224.     

Thermosensitive polymeric micelles based on the triblock copolymer poly(d,l‐lactide)‐b‐poly(N‐isopropyl acrylamide)‐b‐poly(d,l‐lactide) for controllable drug delivery

A thermosensitive amphiphilic triblock copolymer, poly(d,l ‐lactide) (PLA)‐b‐poly(N‐isopropyl acrylamide) (PNIPAAM)‐b‐PLA, was synthesized by the ring‐opening polymerization of d,l ‐lactide; the reaction was initiated from a dihydroxy‐terminated poly(N‐isopropyl acrylamide) homopolymer (HO‐PNIPAAM‐OH) created by radical polymerization. The molecular structure, thermosensitive characteristics, and micellization behavior of the obtained triblock copolymer were characterized with Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, dynamic light scattering, and transmission electron microscopy. The obtained results indicate that the composition of PLA‐b‐PNIPAAM‐b‐PLA was in good agreement with what was preconceived. This copolymer could self‐assemble into spherical core–shell micelles (ca. 75–80 nm) in aqueous solution and exhibited a phase‐transition temperature around 26 °C. Furthermore, the drug‐delivery properties of the PLA‐b‐PNIPAAM‐b‐PLA micelles were investigated. The drug‐release test indicated that the synthesized PLA‐b‐PNIPAAM‐b‐PLA micelles could be used as nanocarriers of the anticancer drug adriamycin (ADR) to effectively control the release of the drug. The drug‐delivery properties of PLA‐b‐PNIPAAM‐b‐PLA showed obvious thermosensitive characteristics, and the release time of ADR could be extended to 50 h. This represents a significant improvement from previous PNIPAAM‐based drug‐delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45304.     

RAFT synthesis of poly(N‐isopropylacrylamide) and poly(methacrylic acid) homopolymers and block copolymers: Kinetics and characterization

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was used successfully to synthesize temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm), poly(methacrylic acid) (PMAA), and their temperature‐responsive block copolymers. Detailed RAFT polymerization kinetics of the homopolymers was studied. PNIPAAm and PMAA homopolymerization showed living characteristics that include a linear relationship between M _n and conversion, controlled molecular weights, and relatively narrow molecular weight distribution (PDI < 1.3). Furthermore, the homopolymers can be reactivated to produce block copolymers. The RAFT agent, carboxymethyl dithiobenzoate (CMDB), proved to control molecular weight and PDI. As the RAFT agent concentration increases, molecular weight and PDI decreased. However, CMDB showed evidence of having a relatively low chain transfer constant as well as degradation during polymerization. Solution of the block copolymers in phosphate buffered saline displayed temperature reversible characteristics at a lower critical solution temperature (LCST) transition of 31°C. A 5 wt % solution of the block copolymers form thermoreversible gels by a self‐assembly mechanism above the LCST. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1191–1201, 2006     

Synthesis,characterization and thermal degradation of dual temperature‐ and pH‐sensitive RAFT‐made copolymers of N,N‐(dimethylamino)ethyl methacrylate and methyl methacrylate

Poly{[(N,N‐(dimethylamino)ethyl methacrylate]‐co‐(methyl methacrylate)} copolymers of various compositions were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization at 70 °C in N,N‐dimethylformamide. The polymer molecular weights and molecular weight distributions were obtained from size exclusion chromatography, and they indicated the controlled nature of the RAFT polymerizations; the polydispersity indices are in the range 1.1–1.3. The reactivity ratios of N,N‐(dimethylamino)ethyl methacrylate (DMAEMA) and methyl methacrylate (MMA) (r_DMAEMA = 0.925 and r_MMA = 0.854) were computed by the extended Kelen–Tüdös method at high conversions, using compositions obtained from ¹H NMR. The pH‐ and temperature‐sensitive behaviour were studied in aqueous solution to confirm dual responsiveness of these copolymers. The thermal properties of the copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The kinetics of thermal degradation were determined by Friedmann and Chang techniques to evaluate various parameters such as the activation energy, the order and the frequency factor. © 2012 Society of Chemical Industry     

Preparation and microstructural analysis of poly(ethylene oxide) comb‐type grafted poly(N‐isopropyl acrylamide) hydrogels crosslinked by poly(ϵ‐caprolactone)

Poly(N‐isopropyl acrylamide) (PNIPAAm)‐graft‐poly(ethylene oxide) (PEO) hydrogels crosslinked by poly(?‐caprolactone) diacrylate were prepared, and their microstructures were investigated. The swelling/deswelling kinetics and compression strength were measured. The relationship between the structure and properties of hydrogel are discussed. It was found that the PEO comb‐type grafted structure reduced the thermosensitivity and increased the compression strength. The addition of poly(?‐caprolactone) (PCL) accelerated the deswelling rate of the hydrogels. Meanwhile, the entanglement of PCL chains restrained the further swelling of the network of gels. The PCL crosslinking agent and PEO comb‐type grafted structure made the behavior of the hydrogels deviate from the rubber elasticity equations. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of end‐functionalized poly(N‐isopropyl acrylamide) with zinc porphyrin and its photocatalytic activity under visible light

A series of well‐defined linear poly(N‐isopropyl acrylamide) with an asymmetrical zinc(II) porphyrin (ZnPor–PAM) end group was synthesized by atom transfer radical polymerization, wherein 5,10,15,20‐tetra(p‐bromopropanoyloxyethylphenyl) zinc porphyrin tripropionate was used as the initiator and CuBr/tris(2‐dimeoethyl)amine was used as the catalyst system. The structure of the ZnPor–PAM was characterized by Fourier transform infrared spectroscopy and ¹H‐NMR. In addition, the polydispersity index (PDI) obtained by gel permeation chromatography indicated that the molecular weight distribution was narrow; thus, the polymerization was well controlled (1.05 < PDI < 1.21). Because of the incorporation of hydrophobic porphyrin, the lower critical solution temperature of ZnPor–PAM was lower than that of the N‐isopropyl acrylamide homopolymer. Most interestingly, the ZnPor–PAM possessed remarkable photocatalytic activity for the oxidative degradation of methylene blue in the presence of hydrogen peroxide under visible‐light radiation. Moreover, ZnPor–PAM could be reused through the uncomplicated procedure, which exploited the thermoresponsive properties of ZnPor–PAM without any significant loss in activity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40523.     

Sulfur containing poly(N‐isopropylacrylamide) copolymer hydrogels for thermosensitive extraction of gold(III) ions

Poly[N‐isopropylacrylamide‐co‐[2‐(methylthio)ethyl methacrylate]], poly(NIPA‐co‐MTEMA) gels were prepared by free radical polymerization in aqueous solution. The homogeneous and heterogeneous gels were prepared by using 10 mM MTEMA in 5.0%(v/v) ethanol at 10°C and 30 mM MTEMA in 20%(v/v) ethanol at 50°C, in 1.0 and 1.5M NIPA solution, respectively. Homogeneous and heterogeneous gels had swelling ratios at 540 ± 28% and 551 ± 37%, respectively. The extraction of Au(III) ion was studied in batch method. The optimum pHs for the extraction of Au(III) by homogeneous and heterogeneous gels were 1–3 and 1–5, respectively. The suitable extraction time was 3 h at 50°C when using a rod‐shaped copolymer (0.7 cm diameter and 1 cm length). The adsorption behavior obeyed the Langmuir and Freundlich isotherms. The maximum sorption capacities of Au(III) onto homogeneous and heterogeneous gels were 62.8 and 322 μmol/g, respectively. The desorption equilibrium was reached within 2–3 h at 10°C by 0.1M thiourea in 5%(v/v) HCl. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Characteristic role of crosslinker on thermally induced volumetric contraction–expansion processes in poly(N‐isopropylacrylamide) networks and water systems

In this work, the degree of crosslinking on the volumetric contraction–expansion processes of hydrogels made of poly(N‐isopropylacrylamide) (NIPA) (initial amount: C_m) with varied amount (z) of crosslinking agent methylene‐bis‐acrylamide (BIS) in reference to most commonly used NIPA gel that was synthesized with C_m = 700 mM and z = 8.6 mM was investigated by applying our recently developed pycnometry. We focused on characteristic role of four polymeric NIPA residues directly bonded to a single BIS molecule by evaluating the total volume of gels per four NIPA residues directly bonded to a BIS molecule, plus associated water [ν_sp(gel)(NIPA)_bonded)(T)], and the corresponding number of water molecules per four NIPA residues [N_s(gel)(NIPA)_bonded)(T)]. We elucidated how these quantities characteristically contribute to changes in the volumetric contraction–expansion processes of hydrogels. A comparison of these quantities with the corresponding quantities for (NIPA)_unbonded residues clearly revealed a significant structural difference between (NIPA)_bonded and (NIPA)_unbonded. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Interpolymer interactions and miscibility in poly(n‐butyl methacrylate‐co‐methacrylic acid)/poly(styrene‐co‐N,N‐dimethyl acrylamide) blends

The miscibility of poly(n‐butyl methacrylate‐co‐methacrylic acid) containing 18 mol % methacrylic acid (BMAM‐18) and poly(styrene‐co‐N,N‐dimethyl acrylamide) containing 17 mol % N,N‐dimethyl acrylamide (SAD‐17) was investigated with viscometry, differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. The DSC analysis showed a single glass‐transition temperature for all the blends, indicating that these copolymers were miscible over the entire composition range. The glass‐transition temperatures of these blends were higher than those calculated with the additivity rule. This was characteristic of the presence of specific interactions. The interactions between BMAM‐18 and the tertiary amide of SAD‐17 were studied with FTIR spectroscopy, which revealed that hydrogen‐bonding interactions occurred between the hydroxyl groups of BMAM‐18 and the carbonyl amide of SAD‐17. A new band characterizing these interactions appeared around 1613 cm^?1. The quantitative results showed that the fraction of the associated amide increased with an increase in the amount of the acidic BMAM‐18 copolymer. Although BMAM‐18 and SAD‐17 led to homogeneous solutions in butan‐2‐one, as the concentration of N,N‐dimethyl acrylamide increased to 32 mol % [as within the poly(styrene‐co‐N,N‐dimethyl acrylamide) containing 32 mol % N,N‐dimethyl acrylamide], complexation occurred when this latter compound was mixed with BMAM‐18 in butan‐2‐one. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2717–2724, 2006     

Cephazoline sodium release from poly(N‐isopropyl acrylamide‐co‐N,N‐dimethylacrylamide) hydrogels

Hydrogels are hydrophilic polymers that swell to an equilibrium volume in the presence of water, preserving their shape. The dynamic swelling behavior of poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide) [poly(NIPA‐co‐DMA)] copolymers at 37°C was investigated. It was observed that the swelling degree in the copolymers decreases with the N‐isopropylacrylamide content. In addition, the liberation mechanism was found to be Fickian. Diffusion coefficients according to Fick′s law as a function of the N‐isopropylacrylamide concentration and results of the release process are reported. The kinetics of cephazoline sodium release from poly(NIPA‐co‐DMA) hydrogels with different compositions was studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3433–3437, 2004     

Environmental responses of poly(N‐isopropylacrylamide‐co‐glycidyl methacrylate derivatized dextran) hydrogels

A series of intelligent hydrogels (poly(NIPA‐co‐GMA‐Dex)) were synthesized by copolymerization of N‐isopropylacrylamide (NIPA) and glycidyl methacrylate derivatized dextran (GMA‐Dex) in aqueous solution with different ratios. Their swelling behaviors at different temperatures and in different pH and ionic strengths, and their mechanical properties were studied. It has found that poly(NIPA‐co‐GMA‐Dex) hydrogels are temperature‐, pH‐, and ionic strength‐sensitive associated with the roles of the component PNIPA and GMA‐Dex, respectively. Most significantly, poly (NIPA‐co‐GMA‐Dex) hydrogels exhibit simultaneously good swelling properties and mechanical properties. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2435–2439, 2005     

A water‐soluble CO2‐triggered viscosity‐responsive copolymer of N,N‐dimethylaminoethyl methacrylate and acrylamide

A series of copolymers PDAMs were synthesized with varying monomer ratio of acrylamide (AM) and N,N‐dimethylaminoethyl methacrylate (DMAEMA). The resulting copolymer solution shows an interesting property of viscosity‐response which is CO₂‐triggered and N₂‐enabled. Tertiary amine groups of PDAMs experience a reversible transition between hydrophobic and hydrophilic state upon CO₂ addition and its removal, which induced different rheological behavior. A combination of zeta‐potential, laser particle‐size analysis, and electrical conductivity analysis indicated that, when the monomer mole ratio of DMAEMA and AM is less than or equal to 3 : 7, the hydrophobic association structure between the copolymer molecules was destroyed by the leading of CO₂ and caused a viscosity decrease in its solution. On the contrary, when the monomer mole ratio of DMAEMA and AM is more than 3 : 7, a more extended conformation due to the protonated tertiary amine groups is formed and the enhanced repulsive interactions among the copolymer molecule results in a rise of its solution viscosity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40872.