Quinone propionic acid‐based redox‐triggered polymer nanoparticles for drug delivery: Computational analysis and in vitro evaluation

Redox‐responsive polymers with pendant quinone propionic acid groups as a redox trigger were optimized by computational modeling to prepare efficient redox‐triggered polymer nanoparticles (NPs) for drug delivery. Lipophilicities at complete reduction of redox‐responsive polymers (<5000 Da) constructed with adipic acid and glutaric acid were remarkably reduced to range from ?6.29 to ?0.39 compared with nonreduced state (18.87–32.46), suggesting substantial polymer solubility reversal in water. Based on this hypothesis, redox‐responsive NPs were prepared from the synthesized polymers with paclitaxel as model cancer drug. The average size of paclitaxel‐loaded NPs was 249.8 nm and their reconstitutions were stable over eight weeks. In vitro drug release profiles demonstrated the NPs to release >80% of paclitaxel over 24 h at a simulated redox‐state compared with 26.5 to 41.2% release from the control. Cell viability studies revealed that the polymer was nontoxic and the NPs could release paclitaxel to suppress breast cancer cell growth. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40461.     

Temperature,pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for controlled release

Temperature, pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for drug delivery and release are designed. The well‐defined tetrablock copolymer poly(polyethylene glycol methacrylate)–poly[2‐(dimethylamino) ethyl methacrylate]–poly(N‐isopropylacrylamide)–poly(methylacrylic acid) (PPEGMA‐PDMAEMA‐PNIPAM‐PMAA) is synthesized via atom transfer radical polymerization, click chemistry, and esterolysis reaction. The tetrablock copolymer self‐assembles into noncrosslinked micelles in acidic aqueous solution. The core‐crosslinked micelles, shell‐crosslinked micelles, and shell–core dilayer‐crosslinked micelles are prepared via quaternization reaction or carbodiimide chemistry reaction. The crosslinked micelles are used as drug carriers to load doxorubicin (DOX), and the drug encapsulation efficiency with 20% feed ratio reached 59.2%, 73.1%, and 86.1%, respectively. The cumulative release rate of DOX is accelerated by single or combined stimulations. The MTT (3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay verifies that the inner‐layer crosslinked micelles show excellent cytocompatibility, and DOX‐loaded micelles exhibit significantly higher inhibition for HepG2 cell proliferation. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46714.     

Self‐aggregated nanoparticles of N‐dodecyl,N′‐glycidyl(chitosan) as pH‐responsive drug delivery systems for quercetin

In this study, pH‐responsive amphiphilic chitosan (CS) nanoparticles were used to encapsulate quercetin (QCT) for sustained release in cancer therapy. The novel CS derivatives were obtained by synthesis with 2,3‐epoxy‐1‐propanol, also known as glycidol, followed by acylation with dodecyl aldehyde. Characterization was performed by spectroscopic, viscosimetric, and size‐determination methods. Critical aggregation concentration, morphology, entrapment efficiency, drug release profile, cytotoxicity, and hemocompatibility studies were also carried out. The average size distribution of the self‐assembling nanoparticles measured by dynamic light scattering ranged from 140 to 300 nm. In vitro QCT release and Korsmeyer–Peppas model indicated that pH had a major role in drug release. Cytotoxicity assessments indicated that the nanoparticles were non‐cytotoxic. 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay further revealed that QCT‐loaded nanoparticles could inhibit MCF‐7 cell growth. In vitro erythrocyte‐induced hemolysis indicated the good hemocompatibility of the nanoparticles. These results suggest that the synthesized copolymers might be potential carriers for hydrophobic drugs in cancer therapy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45678.     

Solid lipid nanoparticles loaded thermoresponsive pluronic–xanthan gum hydrogel as a transdermal delivery system

The aim of this study was to develop and investigate thermoresponsive hydrogel incorporating curcumin (Cur) for application as a transdermal delivery system. Cur was encapsulated within solid lipid nanoparticles via ultrasonic homogenization, and these were introduced into a thermoresponsive hydrogel composed of pluronic F68 (PF68) and F127 (PF127). The hydrogel composed of PF68 and PF127 in 10:90 ratio transformed from sol to gel at 29.3 °C close to skin temperature. The skin adhesiveness and adhesive strength of the hydrogel with 0.2% (w/w) of XG was 1.64 and 1.24 times higher than those of the hydrogel without XG, respectively. The physiochemical characteristics of prepared formulations were investigated via observation of particle size, polydispersity index, transmission electron microscopy, and scanning electron microscopy. Moreover, Fourier transform infrared spectroscopy analysis was performed at physiological temperature, which revealed lower hydrogen bonding intensity at gel phase than at sol phase. The cumulative amount of Cur that penetrated significantly increased compared with the Cur ethanol solution. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46004.     

Thermoresponsive/low‐fouling Zwitterionic hydrogel for controlled drug release

A controlled/ living free‐radical polymerization technique was introduced to prepared a homogeneous poly(N‐isopropylacrylamide)‐g‐poly(sulfobetaine methacrylate) hydrogel (RG) possessing a highly porous architecture via two steps. Compared to a poly(N‐isopropylacrylamide)‐co‐poly(sulfobetaine methacrylate) hydrogel (CG) prepared by conventional radical polymerization, RG exhibited a much faster shrinking rate (it lost over 72% of the water in 15 min) in response to the temperature changes. The release behaviors of tetracycline hydrochloride (TCHC) of the hydrogels indicated the TCHC release from the RG could be prolonged to 48 h at 37°C; this was much longer than that for CG (5 h at 37°C). Bovine serum albumin (BSA) was chosen as the model protein to examine the low‐fouling properties of the RG. The BSA adsorption data showed that improved antifouling properties could be achieved by the RG at both 25 and 37°C. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39816.     

Spray‐dried microparticles composed of cinnamoyl poly(N‐isopropylacrylamide‐co‐hydroxyethylacrylate) and gold nanoparticle

Temperature‐ and NIR irradiation‐responsive microparticles composed of cinnamoyl poly(N‐isopropylacrylamide‐co‐hydroxyethylacrylate) [CinP(NIPAM‐HEA)] and gold nanoparticle (GNP) were prepared by a spray‐drying method. According to the cloud points determined by an optical method, the HEA content in P(NIPAM‐HEA) had no marked effect on the lower critical solution temperature (LCST). However, the cinnamoyl group content in CinP(NIPAM‐HEA) had a significant effect on the LCST. The LCSTs determined by a calorimetric method was in agreement with those determined by an optical method. The hydrodynamic mean diameter of gold nanoparticle (GNP) prepared by reducing gold ions was about 30 nm and it seemed to be a nanosphere on TEM photo. Spray‐dried CinP(NIPAM‐HEA) microparticles containing GNP was 1.5 μm to 12 μm in diameter on SEM photo. Gold was detected on the energy‐dispersive X‐ray spectrum of the microparticles. The amount of FITC‐dextran released for 12 h from the microparticles was much higher at temperatures above the LCST (at 37 °C and 45 °C) than below the LCST (at 20 °C and 25 °C). The cumulative release amount in 12 h was only about 3% without NIR irradiation, whereas the value was about 26.5% when NIR was irradiated to the microparticle suspension. The photothermal energy generated by GNP was believed to render the thermosensitive copolymers de‐swollen and hydrophobic, allowing for the active release of dye from the microparticles. The NIR irradiation‐responsive GNP‐loaded microparticles could be applied to the development of NIR‐responsive drug carriers which release their contents in response to an external stimulus (i.e., NIR irradiation). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44141.     

Dual responsive polymeric bionanocomposite gel beads for controlled drug release systems

Scientists are searching potential solutions for cancer treatments as well as ways to avoid the side effects of anti‐cancer agents, via targeted drug delivery. The aim of this research is to propose dual responsive beads based on sodium alginate (SA), methylcellulose (MC), and magnetic iron oxide nanoparticles (MIONs) for controlled release of 5‐Fluorouracil (5‐FU) as model drug. The beads were prepared by the dual crosslinking of SA and MC in the presence of MIONs. The structural, thermal, morphological, magnetic characteristics as well as the release profile of 5‐FU were studied. The characterization results showed that the drug molecules and MIONs were well dispersed in the polymeric matrix. The cumulative release percentage was ca. 80% at pH = 4.2 and 40% at pH = 7.2 after 6 h. Thus, the sensitivity of beads on the pH value was verified. Moreover, the release profile exhibited reduction with an increase in the concentration of MIONs under an external magnetic field. The obtained results confirmed the dual sensitive release of 5‐FU (i.e., PH/magnetic) that can be used for the targeted and controlled drug delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45143.     

6‐O‐dodecyl‐chitosan carbamate–based pH‐responsive polymeric micelles for gene delivery

pH‐responsiveness is highly desirable in the stimuli‐responsive controlled release because of the distinct advantages of the fast response of pH‐triggered release and the available pH‐difference between intra‐ and extra‐cells. The present work reported a kind of novel pH‐responsive polymeric micelles, which was derived from biopolymer of 6‐O‐dodecyl‐chitosan carbamate (DCC) and evaluated as gene‐controlled release vector. The amphiphilic and amino‐rich DDC was synthesized through a protection‐graft‐deprotection method. ¹³C CP/MAS NMR, FTIR, and elemental analysis identified that dodecyls were chemoselectively grafting at 6‐hydroxyls of chitosan via the pH‐responsive bonds of carbamate, and the substitute degree (SD) was 14%. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) showed that DCC self‐assembled into polymeric micelles in aqueous solutions. The DCC polymeric micelles formed complexes with pDNA, which was elucidated by Gel retardation, TEM, and DLS. Transfection and cytotoxicity assays in A549 cells showed that DCC polymeric micelles were suitable for gene delivery. The improved transfection was attributed to the pH‐responsiveness and the moderate pDNA‐binding affinity, which led to easier release of pDNA intra‐cells. The synthesized DCC polymeric micelles might be a promising and safe candidate as nonviral vectors for gene delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42469.     

A facile preparation of pH‐temperature dual stimuli‐responsive supramolecular hydrogel and its controllable drug release

A series of pH‐temperature dual stimuli‐responsive random copolymers poly[N,N‐dimethylaminoethyl methacrylate‐co‐poly(poly(ethylene glycol) methyl ether methacrylate][poly(DMAEMA‐co‐MPEGMA)] were synthesized by free radical polymerization. The supramolecular hydrogel was formed by pseudopolyrotaxane, which was prepared with the host‐guest interactions between α‐cyclodextrin (α‐CD) and poly(ethylene glycol) (PEG) side chains. Fourier transform infrared (FT‐IR), nuclear magnetic resonance (¹H NMR), and X‐ray diffraction (XRD) confirmed the structures of the hydrogels. The pH‐temperature dual stimuli responsive properties of the hydrogels were characterized by rheometer. Finally, the controllable drug release behavior of the hydrogel, which was used 5‐fluorouracil (5‐Fu) as the model drug, was investigated at different temperatures and different pH values. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43279.     

Thermally and magnetically dual‐responsive mesoporous silica nanospheres: preparation,characterization, and properties for the controlled release of sophoridine

Novel thermally and magnetically dual‐responsive mesoporous silica nanoparticles [magnetic mesoporous silica nanospheres (M‐MSNs)–poly(N‐isopropyl acrylamide) (PNIPAAm)] were developed with magnetic iron oxide (Fe₃O₄) nanoparticles as the core, mesoporous silica nanoparticles as the sandwiched layer, and thermally responsive polymers (PNIPAAm) as the outer shell. M‐MSN–PNIPAAm was initially used to control the release of sophoridine. The characteristics of M‐MSN–PNIPAAm were investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetry, N₂ adsorption–desorption isotherms, and vibrating specimen magnetometry analyses. The results indicate that the Fe₃O₄ nanoparticles were incorporated into the M‐MSNs, and PNIPAAm was grafted onto the surface of the M‐MSNs via precipitation polymerization. The obtained M‐MSN–PNIPAAm possessed superparamagnetic characteristics with a high surface area (292.44 m²/g), large pore volume (0.246 mL/g), and large mesoporous pore size (2.18 nm). Sophoridine was used as a drug model to investigate the loading and release properties at different temperatures. The results demonstrate that the PNIPAAm layers on the surface of M‐MSN–PNIPAAm effectively regulated the uptake and release of sophoridine. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40477.     

Epoxidized poly(N‐isopropyl acrylamide)‐b‐epoHTPB‐b‐poly(N‐isopropyl acrylamide) triblock copolymer micelle nanoparticles for 10‐hydroxycamptothecin drug release

Thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAM)‐block‐hydroxy‐terminated polybutadine‐block‐PNIPAM triblock copolymers were synthesized by atom transfer radical polymerization; this was followed by the in situ epoxidation reaction of peracetic acid. The copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography measurements, and their physicochemical properties in aqueous solution were investigated by surface tension measurement, fluorescent spectrometry, ultraviolet–visible transmittance, transmission electron microscopy observations, dynamic light scattering, and so on. The experimental results indicate that the epoxidized copolymer micelle aggregates retained a spherical core–shell micelle structure similar to the control sample. However, they possessed a decreased critical aggregate concentration (CAC), increased hydrodynamic diameters, and a high aggregation number and cloud point because of the incorporation of epoxy groups and so on. In particular, the epoxidized copolymer micelles assumed an improved loading capacity and entrapment efficiency of the drug, a preferable drug‐release profiles without an initial burst release, and a low cytotoxicity. Therefore, they were more suitable for the loading and delivery of the hydrophobic drug as a controlled release drug carrier. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41877.     

Synthesis of poly(N‐isopropylacrylamide) by distillation precipitation polymerization and quantitative grafting on mesoporous silica

In this work, syntheses of thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) with different molecular weights were carried out in ethanol by distillation precipitation polymerization (DPP) technique. The synthesized polymers were fully characterized by attenuated total reflection Fourier‐transform infrared (ATR‐FTIR) spectroscopy, nuclear magnetic resonance spectroscopy, and size exclusion chromatography techniques. The lower critical solution temperatures of the polymers were determined with differential scanning calorimetry. A simple and versatile method for the in situ synthesis and grafting of PNIPAM on mesoporus silica nanoparticles (MSNs) with improved control over quantitative grafting is devised. The PNIPAM grafted MSNs were characterized with ATR‐FTIR, thermogravimetric analysis, transmission electron microscopy, and dynamic light scattering analyses. From the results obtained it is showed that quantitative grafting of PNIPAM on MSNs from 1 to 20% by weight can be tuned by manipulating the in situ DPP reaction conditions. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44181.     

Fabrication of galactosylated chitosan–5‐fluorouracil acetic acid based nanoparticles for controlled drug delivery

In this study, a novel type of macromolecular prodrug, N‐galactosylated chitosan (GC)?5‐fluorouracil acetic acid (FUA) conjugate based nanoparticles, was designed and synthesized as a carrier for hepatocellular carcinoma drug delivery. The GC–FUA nanoparticles were produced by an ionic crosslinking method based on the modified ionic gelation of tripolyphosphate with GC–FUA. The structure of the as‐prepared GC–FUA was characterized by Fourier transform infrared and ¹H‐NMR analyses. The average particle size of the GC–FUA nanoparticles was 160.1 nm, and their drug‐loading content was 21.22 ± 2.7% (n = 3). In comparison with that of the freshly prepared nanoparticles, this value became larger after 7 days because of the aggregation of the GC–FUA nanoparticles. An in vitro drug‐release study showed that the GC–FUA nanoparticles displayed a sustained‐release profile compared to 5‐fluorouracil‐loaded GC nanoparticles. All of the results suggest that the GC–FUA nanoparticles may have great potential for anti‐liver‐cancer applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42625.     

Swelling kinetics,mechanical properties,and release characteristics of chitosan‐based semi‐IPN hydrogels

Two series of pH‐sensitive semi‐interpenetrating network hydrogels (semi‐IPN) based on chitosan (CS) natural polymer and acrylamide (AAm) and/or N‐hydroxymethyl acrylamide (HMA) monomers by varying the monomer and CS ratios were synthesized by free radical chain polymerization. 5‐Fluorouracil (5‐FU), a model anticancer drug, has been added to the feed composition before the polymerization. The characterization of gels indicated that the drug is molecularly dispersed in the polymer matrix. The swelling kinetics of drug‐loaded gels have decreased with increased HMA content at 37°C in both distilled water and buffer solutions with a pH of 2.1 or 7.4. Elastic modulus of the gels increased with the increase in HMA content and higher CS concentration enhanced the elastic modulus positively. Moreover, cumulative release percentages of the gels for 5‐FU were ca. 10% higher in pH 2.1 than those in pH 7.4 media. It was determined that they can be suitable for the use in both gastric and colon environments. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41886.     

A convenient scheme for synthesizing reduction‐sensitive chitosan‐based amphiphilic copolymers for drug delivery

A novel type of reduction‐sensitive graft copolymers, chitosan‐S‐S‐poly(ε‐caprolactone) (CS‐S‐S‐PCL, here ‐S‐S‐ means PCL was conjugated onto chitosan backbone through disulfide linkage), was synthesized through a convenient route using dithiodipropionic anhydride (DTDPA) as a disulfide donor. Reaction of hydroxy‐terminated poly(ε‐caprolactone) (PCL) with DTDPA quantitatively yielded DTDPA functionalized PCL (PCL‐S‐S‐COOH). The disulfide‐containing polyester was regioselectively conjugated onto the hydroxy groups of chitosan under mild and homogeneous conditions, utilizing dodecyl sulfate‐chitosan complexes (SCC) as an intermediate. The self‐assembly and Doxorubicin (Dox) release behavior of the copolymers were investigated. Spherical micelles could be formed through self‐assembly of CS‐S‐S‐PCL in aqueous media. The reduction‐sensitive behavior of CS‐S‐S‐PCL micelles was investigated by using Dithiothreitol (DTT) as a reductive reagent. In the presence of 10 mM DTT, the micelles gradually lost their aggregation stability and were precipitated out after four days. In addition, the Dox release was accelerated when the micelles were treated with DTT. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

pH‐sensitive hydroxyethyl starch–doxorubicin conjugates as antitumor prodrugs with enhanced anticancer efficacy

Doxorubicin (DOX) is a widely used chemotherapeutic drug for the treatment of several types of cancers, which has limitation in clinical applications because of severe heart toxicity. Herein, to reduce the fast clearance from the blood system and the severe systemic toxicity caused by the nonspecific protein adsorption, a pH‐sensitive drug delivery system with higher drug conjugated content was prepared by conjugating DOX onto hydroxyethyl starch (HES) with a pH‐sensitive hydrazone bond. In normal physiological environment, the release of DOX conjugated onto HES was slight which could be neglected without any side effect. However, in an acidic environment mimicking the tumor microenvironment, this pH‐sensitive hydrazone linkage provided a controlled and sustained release of DOX over a period of more than 3 days. The conjugates had good biocompatibility, long circulation, and lower cytotoxicity, which could efficiently be transferred into HeLa and HepG2 cells and release the conjugated drug. Based on these promising properties, these HES–DOX conjugates outline the significant potential for future biomedical application in the controlled release of antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42778.     

Nanoparticles based on β‐conglycinin and chitosan: Self‐assembly,characterization, and drug delivery

The purpose of this study was to fabricate and evaluate nanoparticles based on β‐conglycinin (7S) and chitosan (CS) to deliver 5‐fluorouracil (5‐FU). The nanoparticles were prepared with a self‐assembly method. Turbidity measurements performed at 600 nm were used to investigate the formation of the nanoparticles as a function of the pH, 7S‐to‐CS mass ratio, and total concentration of 7S and CS. The optimum conditions for the preparation of the nanoparticles were a pH of 5.5, a 7S‐to‐CS mass ratio of 4 : 1, and total concentration of 7S and CS of 9 mg/mL. Under these conditions, the nanoparticles in solution had a high turbidity and good stability. Fourier transform infrared spectroscopy revealed that the nanoparticles were formed mainly through electrostatic interactions between the amine groups (? NH₃⁺) of CS and the carboxyl groups (? COO^?) of 7S. Scanning electron microscopy micrographs and dynamic light scattering analysis showed that the nanoparticles had an approximately spherical morphology with a smooth surface, and the mean particle size was about 120 nm with a narrow size distribution. The release of 5‐FU showed an initial burst release followed by a sustained release, and the release was pH‐dependent. The release mechanism of 5‐FU was Fickian diffusion according to the Ritger–Peppas model. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41963.     

Controlled co‐delivery of hydrophilic and hydrophobic drugs from thermosensitive and crystallizable copolymer nanoparticles

Functionalized amphiphilic block copolymers poly(N‐isopropyl acrylamide)‐b‐poly(stearyl methacrylate) (PNIPAM‐PSMA) are synthesized. Their self‐assembled core‐shell nanoparticles have the hydrophilic thermosensitive shell and hydrophobic crystallizable core. Nanoparticles exhibit volume phase transition at temperature of 38 °C and its poly(stearyl methacrylate) (PSMA) moiety could form nano size crystals to retain drugs, making them good carriers for drug co‐delivery system. Thermosensitivity and crystallinity of nanoparticles are characterized with dynamic light scattering (DLS), differential scanning calorimetry (DSC), small‐angle X‐ray scattering (SAXS), and atomic force microscopy (AFM). The interactions and relationship between chemical structures of copolymer nanoparticles and loading drugs are discussed. Different loading techniques and combined loading of hydrophobic/hydrophilic drugs are studied. Nanoparticles show a good and controllable drug loading capacity (DL) of hydrophilic/hydrophobic drugs. The drugs release kinetics is analyzed with Fick's law and Weibull model. A general method for analyzing drug release kinetics from nanoparticles is proposed. Weibull model is well fitted and the parameters with definite physical meaning are analyzed. PNIPAM‐PSMA nanoparticles show a quite different thermal response, temporal regulation, and sustained release effect of hydrophilic and hydrophobic drugs, suggesting a promising application in extended and controlled co‐delivery system of multi‐drug. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44132.     

Photo/pH dual‐responsive biocompatible poly(methacrylic acid)‐based particles for triggered drug delivery

A novel dual‐responsive (light and pH) particle based on poly(methacrylic acid), poly(methacrylic acid)–poly[1‐(2‐nitrophenyl)ethane‐1,2‐diyl bis(2‐methylacrylate)]was prepared with the facile method of two‐step homogeneous radical polymerization with methacrylic acid as the monomer and 1‐(2‐nitrophenyl)ethane‐1,2‐diyl bis(2‐methylacrylate) as a photodegradable crosslinker. Photolytic assessments were conducted upon irradiation with a UV lamp; this led to particle disintegration caused by cleavage of the photolabile crosslinking points. The light‐dependent degradation was investigated through particle size changes, absorption spectra variations, surface morphology changes, Fourier transform infrared spectroscopy, and the release of Nile red from the particles after irradiation. The pH dependence of the particle systems induced by the protonation and deprotonation of poly(methacrylic acid) was also confirmed by fluorescence spectroscopy. The triggered release of fluorescein diacetate was investigated to demonstrate that the release behavior in cells was light dependent. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44003.     

Chitosan‐modified d‐α‐tocopheryl poly(ethylene glycol) 1000 succinate‐b‐poly(ε‐caprolactone‐ran‐glycolide) nanoparticles for the oral chemotherapy of bladder cancer

Oral chemotherapy is quickly emerging as an appealing option for cancer patients. It is less stressful because the patient has fewer hospital visits and can still maintain a close relationship with health care professionals. Three kinds of nanoparticles made from commercial poly(ε‐caprolactone) (PCL) and self‐synthesized d‐α‐tocopheryl poly(ethylene glycol) 1000 succinate ‐b‐poly(ε‐caprolactone‐ran‐glycolide) [TPGS‐b‐(PCL‐ran‐PGA)] diblock copolymer were prepared in this study for the oral delivery of antitumor agents, including chitosan‐modified PCL nanoparticles, nonmodified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles, and chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles. First, the TPGS‐b‐(PCL‐ran‐PGA) diblock copolymer was synthesized and structurally characterized. Chitosan was adopted to extend the retention time at the cell surface and thus increase the chance of nanoparticle uptake by the gastrointestinal mucosa and improve the absorption of drugs after oral administration. The resulting TPGS‐b‐(PCL‐ran‐PGA) nanoparticles were found to be of spherical shape and around 200 nm in diameter with a narrow size distribution. The surface charge of the TPGS‐b‐(PCL‐ran‐PGA) nanoparticles could be reversed from anionic to cationic after surface modification. The chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles displayed a significantly higher level of cellular uptake compared with the chitosan‐modified PCL nanoparticles and nonmodified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles. In vitro cell viability studies showed the advantages of the chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles over Taxol in terms of their cytotoxicity against human RT112 cells. In summary, the oral delivery of antitumor agents by chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles produced results that were promising for the treatment of patients with bladder cancer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2118–2126, 2013